Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Silicone Compound Supply and Delivery

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract involves the supply and delivery of 7,000 tubes of military-grade silicone compound to the DLA Aviation Hazmat Center in San Diego, California, with strict adherence to hazardous materials handling regulations and packaging code UA0108. The order is DPAS-rated, indicating its priority status within federal procurement, and requires full compliance with all applicable Department of Defense standards for the transportation and handling of hazardous substances. The product must meet exacting military specifications to ensure performance under demanding operational conditions. Issued as a subcontract under the Defense Logistics Agency, this requirement falls under NAICS code 325998 for other chemical product and preparation manufacturing. The solicitation was posted on July 15, 2026, and the delivery location is firmly designated as the DLA Aviation Hazmat Center, necessitating precise coordination for receipt, storage, and documentation. While no specific point of contact or geographical details beyond the delivery site are provided, contractors must be prepared to meet all federal hazmat transport protocols and DPAS prioritization requirements without exception.

General Info

Supply 7,000 military-grade silicone tubes to DLA Aviation Hazmat Center under DPAS priority and hazmat regulations.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

325998 - All Other Miscellaneous Chemical Product and Preparation ManufacturingView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

This scope was carved out of SPE4A6-26-F-CRSV.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

SILICONE COMPOUND

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 15

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply and delivery of 7,000 tubes of military-grade silicone compound to DLA Aviation Hazmat Center in San Diego, CA, compliant with hazardous materials handling, packaging code UA0108, and DPAS-rated order requirements.

Similar Contracts

Same NAICS industry code

Non-micronized Pentaerythritol

Solicitation # W519TC27RNMPE

The Army Contracting Command - Rock Island is conducting market research through a sources sought announcement for the procurement of Non-micronized Pentaerythritol. The future requirement will be issued as a single firm-fixed price contract for a non-commercial supply, awarded to the responsive, responsible, lowest priced offeror under Federal Acquisition Regulation Part 12 Simplified Acquisition Procedures. The scope includes a primary requirement for 41,800 lbs of the material and a First Article Test of 2 lbs, with an additional 100 percent option quantity of 41,800 lbs to be evaluated at the time of award. All materials must be produced in accordance with drawing 36-1-317, Rev F. Interested parties are requested to provide their UEI/Cage code, small business designation, business size status, past performance on similar requirements, and estimated costs. Submissions should be directed to Contract Specialist Austin Acree. This current announcement is for research purposes only and will not result in a contract award.

POSTED

about 19 hours ago

DEADLINE

FCC BUTNER - WATER CHEMICAL TESTING AND CONSULTATION SERVICES

Solicitation # 15BGCS26Q10600001

The Federal Bureau of Prisons is seeking quotations for water chemical testing and consultation services at the Federal Correctional Complex Butner. This is an unrestricted procurement under solicitation 15BGCS26Q10600001, utilizing NAICS code 325998. The government intends to award an indefinite delivery/requirements contract with firm-fixed unit pricing, consisting of a base year and four optional 12-month extensions. Award decisions will be based on price and past performance. Interested parties must submit their quotes via email to Justin Wray by the specified deadline. All bidders must be registered in the System for Award Management and provide a Unique Entity Identification number. The requirement is currently serviced by Venergy Group, LLC. Selected contractors must also comply with E-Verify requirements within the specified timeframes following the contract award.

POSTED

about 19 hours ago

DEADLINE

Biorem Biofilter Media Supplier

POSTED

DEADLINE

in about 1 month

Supply of Gasket Forming Compound (NSN 8030-01-517-1616)

AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Supply of Chlorine Dioxide Water Purification Tablets

MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

DEADLINE

Solicitation # SPE7L5-26-T-5424

Solicitation SPE7L5-26-T-5424 is a fixed-price request for quotations issued by DLA Land and Maritime for the procurement of 275 posters, identified by NSN 7690-01-593-4698. The procurement falls under NAICS code 325998 and requires delivery within 71 days of award, with a need ship date of March 2, 2026, and an original required delivery date of January 7, 2027. All quotes must be submitted via the DLA Internet Bid Board System (DIBBS) by the deadline of September 21, 2026. The contract specifies that items must be delivered to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. Inspection and acceptance will occur at the destination per FAR 52.246-1. Packaging must adhere to ASTM D3951 and RP001 for palletization, while marking and labeling must comply with MIL-STD-129, with the DLA Master List of Technical and Quality Requirements taking precedence. Payment and invoicing are to be processed electronically through the Wide Area WorkFlow (WAWF) system. Key regulatory requirements include compliance with the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 regarding the safeguarding of covered defense information. The solicitation also incorporates various FAR and DFARS clauses concerning the prohibition of hexavalent chromium, combating trafficking in persons, and restrictions on mandatory arbitration agreements. This buy is identified as a potential candidate for automated award, provided there are no first article test requirements.

LAND SUPPLIER OPNS ENGINES

POSTED

DEADLINE

FLUX, SOLDERING

Solicitation # SPE8E9-26-T-3767

Solicitation SPE8E9-26-T-3767 is a fixed-price request for quotations issued by DLA Troop Support, Construction and Equipment MRO SVC I, for the procurement of 310 quarts of soldering flux, identified by NSN 3439000098808. The requirement is under NAICS code 325998, with a delivery period of 59 days after order. Supplies are to be delivered FOB destination to DLA Distribution San Joaquin in Tracy, California. Inspection and acceptance will also occur at the destination. The material is classified as a hazardous flammable liquid (Hazard Class 3 UN1993, Packing Group II), requiring strict adherence to 49 CFR and ICAO/IMDG regulations for labeling and packaging. A current Material Safety Data Sheet must be provided electronically to DLA and accompany every shipment. Packaging must comply with MIL-PRF-23199E and MIL-STD-2073-IE, while marking must follow MIL-STD-129 and ISO/IEC 16388 for bar coding. Quality conformance is governed by RQ006, with sampling conducted per MIL-STD-1916 or ASO H1331. The solicitation includes a price evaluation preference for certified HUBZone small businesses. Offerors must comply with the Buy American Act and the Berry Amendment, providing full disclosure if non-domestic materials are used. Quotes must be submitted via DIBBS by September 21, 2026. Payment and receiving reports are to be processed electronically through the Wide Area Workflow system.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

WATER PURIFICATION TAB

Solicitation # SPE2DP-26-T-4983

This contract is for the procurement of chlorine dioxide water purification tablets for use in military first aid kits. The tablets are provided in individually sealed units of 10 tablets per package. The product has a total shelf life of 60 months, with a minimum requirement of 51 months remaining upon delivery to the government. The supplier must comply with the Hazard Communication Standard by submitting approved Safety Data Sheets and appropriate labeling prior to the award. Packaging must meet commercial standards and adhere to Medical Marking Standard No. 1. The order consists of 6 packages with a delivery window of 20 days, shipped FOB destination to Fort Bragg.

MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

DEADLINE

LUBRICANT, TIRE AND RIM

Solicitation # SPE7L7-26-T-5204

Solicitation SPE7L7-26-T-5204 is a fixed-price request for quotations issued by DLA Land and Maritime for the procurement of 83 units of tire and rim lubricant (NSN 2640002565529). The requirement is managed under the First Destination Transportation program with a need ship date of March 9, 2027, and a required delivery date of March 14, 2027, to DLA Distribution San Joaquin in Tracy, California. Inspection and acceptance will occur at the destination. The contract mandates strict adherence to hazardous materials protocols, requiring the submission of Safety Data Sheets and hazard warning labels in accordance with 29 CFR 1910.1200 and Federal Standard No. 313-E. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, while palletization must follow RP001. Notably, the use of Class I ozone-depleting chemicals and mercury compounds is prohibited. Quality assurance will be governed by MIL-STD-1916 or ASQ H1331, with a requirement for zero non-conformances in sample lots. Offerors must submit quotes via the DIBBS system and comply with the Buy American Act and Berry Amendment. The contract incorporates various FAR and DFARS clauses, including those regarding cybersecurity (DFARS 252.204-7012), sustainable products, and the prohibition of hexavalent chromium. Payment processing is to be handled electronically through the Wide Area WorkFlow system.

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

CLEANING SOLVENT, GE

Solicitation # SPE8E5-26-T-4085

Solicitation SPE8E5-26-T-4085 is a request for quotations issued by the Defense Logistics Agency Troop Support Construction and Equipment for the procurement of Cleaning Solvent, GE, specifically Dysol Inc part number P28288-16OZB-P-1 (NSN 7930-01-367-0994). The requirement consists of two line items: one box for delivery to Fort Hood, Texas, and ten boxes for delivery to Akrotiri, Cyprus. The items are classified as Type I Code H with a non-extendable shelf life of 12 months. Delivery is required within five days after order, with original required delivery dates set for January 28, 2026, and August 27, 2026. The contract specifies FOB Destination for both shipping, inspection, and acceptance. Due to the nature of the product, the contractor must comply with IP025 for the packaging, marking, and shipping of hazardous materials and adhere to the Hazard Communication Standard 29 CFR 1910.1200 for labeling. Packaging must follow MIL-STD-2073-1E and RP001, while marking must comply with MIL-STD-129. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and adherence to the Buy American Act and Berry Amendment. Quotations must be submitted via the DIBBS portal.

Defense Logistics Agency

POSTED

DEADLINE

Sodium Hexametaphosphate Supplier

POSTED

DEADLINE

Supplier of Water Sampling Test Reagent (Fluoride)

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Military-Grade Packaging and Palletization Services

Packaging and Labeling Services

POSTED

about 14 hours ago

DEADLINE

Supply of Uninterruptible Power Supplies (UPS)

Motor and Generator Manufacturing

POSTED

about 14 hours ago

DEADLINE

MIL-SPEC Packaging and Hazardous Material Shipping

Freight Transportation Arrangement

POSTED

about 14 hours ago

DEADLINE

Supply of Battery Assembly (6140-01-664-6369)

Storage Battery Manufacturing

POSTED

about 14 hours ago

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-26-Q-2418

Solicitation SPE7L7-26-Q-2418 is a firm-fixed-price request for quotations issued by the Defense Logistics Agency Land and Maritime for the procurement of sealed lead acid storage batteries, specifically NSN 6140-01-624-9682. The requirement consists of two line items totaling eight units, with two units for item 0001 and six units for item 0002. Approved sources include EnerSys Delaware Inc. (part numbers ODS-AGM6M or PC2250) and Stored Energy Products, Inc. (part number PC2250). This is a restricted source item requiring government engineering source approval and is designated as a critical application item. The batteries are classified as Type I (Code H) with a non-extendable shelf life of 12 months. Delivery is required within 60 days after receipt of the order, with shipping terms set as FOB Destination. The items are to be delivered to locations in Warrenton, Oregon, and Schofield Barracks, Hawaii. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements RP001. Due to the nature of the supplies, the contractor must adhere to hazardous material identification and shipping standards, including IP025 and FAR 52.223-3, and provide a Material Safety Data Sheet. Inspection and acceptance will occur at the destination, utilizing zero-based sampling plans per MIL-STD-1916 or ASQ H1331. Award will be based on cost alone for quotes that conform to all solicitation requirements.

Battery Manufacturing

POSTED

about 14 hours ago

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-26-Q-2422

POSTED

about 14 hours ago

DEADLINE

STRAINER, SEDIMENT

Solicitation # SPE7L7-26-Q-2420

POSTED

about 14 hours ago

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-26-Q-2419

This contract is a solicitation for the procurement of five storage batteries, part number PS-12100 F1 from Power-Sonic Corporation, under NSN 6140-01-294-6528. The items are designated as critical application items and must feature F1 quick disconnect tabs. The contract is established as a firm fixed price agreement with a delivery requirement of 60 days after the order is placed. Each unit is destined for a specific naval vessel, including the USS Stout, USS Laboon, USS Barry, USS Russell, and USS John S McCain. The batteries are classified as Type I items with a non-extendable shelf life of 12 months. Strict adherence to hazardous materials packaging, marking, and shipping standards is required, specifically prohibiting the intentional addition of mercury except where functionally necessary. Quality assurance will be managed through zero-based sampling plans in accordance with MIL-STD-1916 or ASQ H1331. All packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with inspection and acceptance occurring at the point of origin.

Battery Manufacturing

POSTED

about 14 hours ago

DEADLINE

Solicitation # SPE8E6-26-T-4407

Solicitation SPE8E6-26-T-4407 is a fixed-price request for quotations issued by DLA Troop Support for the procurement of four decals, identified by NSN 7690-01-262-9486 and Boeing part number BACM9L10AVM. This is a Foreign Military Sales requirement for Greece, with delivery required within five days after receipt of order. The items are designated as Type I (Code M) with a non-extendable shelf life of 24 months. Inspection and acceptance will occur at the point of origin, and the final delivery destination is Mechanicsburg, Pennsylvania. The contract mandates strict adherence to DLA packaging and marking standards, specifically MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, including required shelf-life labels. Palletization must comply with RP001, and the use of plastics for wrapping or cushioning should be avoided where possible. Technical and quality requirements are governed by the DLA Master List, including provisions for the removal of government identification from non-accepted supplies and the safeguarding of covered defense information. All quotes must be submitted via the DIBBS portal, and the government will not evaluate offers utilizing additive manufacturing unless specifically authorized.

Commercial Printing (except Screen and Books)

POSTED

about 14 hours ago

DEADLINE

BATTERY ASSEMBLY

Solicitation # SPE7L7-26-Q-2417

The Defense Logistics Agency Land and Maritime is soliciting quotations for the procurement of two battery assemblies, identified by NSN 6140-01-664-6369, under solicitation SPE7L7-26-Q-2417. The required delivery timeframe is 60 days after receipt of order, with the place of performance located at FPO 09592. Award will be determined based on the best value to the government, evaluating technical acceptability, price, and past performance regarding offered delivery. This contract carries stringent security and regulatory requirements, including CMMC Level 2 certification and compliance with DFARS 252.204-7012 for safeguarding covered defense information. Technical data is subject to ITAR and EAR export controls, requiring contractors to have approved US/Canada Joint Certification Program certification and completed specific DLA export-control training. Additionally, the items are classified as hazardous materials, requiring the submission of Material Safety Data Sheets and certification via HAZDEC forms in accordance with FED STD 313D. Packaging and marking must adhere to MIL-STD-2073-1E Level B (Pack Code Q) and MIL-STD-129. Inspection and acceptance will occur at the origin, with DCMA inspection limited to kind, count, and condition. Invoicing and payment processing must be conducted electronically through the Wide Area WorkFlow system.

Battery Manufacturing

POSTED

about 14 hours ago

DEADLINE

LIMITER, RADIO FREQU

Solicitation # SPE4A7-26-Q-1069

The Defense Logistics Agency within the Department of Defense has issued solicitation SPE4A7-26-Q-1069 for the procurement of 49 radio frequency limiters. The items are identified by NSN/Part Number 1430-01-224-2273 and are associated with purchase request 7017409812. This federal solicitation was posted on September 11, 2026, with a response deadline of September 15, 2026. Interested parties should direct inquiries to the buyer via the DIBBS portal or the provided contact email.

Other Electronic Component Manufacturing

POSTED

about 14 hours ago

DEADLINE

COVERALLS, ANTI-EXPO

Solicitation # SPE1C1-26-Q-0498

The Defense Logistics Agency under the Department of Defense has issued solicitation SPE1C1-26-Q-0498 for the procurement of one unit of anti-exposure coveralls, identified by NSN/Part Number 8415-01-593-7934. This federal requirement is tracked under purchase request 7018286739. The solicitation was posted on September 11, 2026, with a response deadline of September 18, 2026. Interested parties should direct all inquiries to the buyer via the email address provided in the primary point of contact or through the DIBBS portal using the specific solicitation number.

Cut and Sew Apparel Manufacturing (except Contractors)

POSTED

about 14 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 650+ contractors already using CLEATUS