Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Site Inspection and Quality Assurance Services

Active

State & Local

Response Deadline09/10/2026, 06:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract seeks qualified providers to deliver site inspection and quality assurance services for projects under the jurisdiction of the Utah agency, ensuring strict adherence to contract documents, applicable codes, and regulatory requirements. Inspectors will work in close coordination with the Design and Facility Construction Management team and the Architect/Engineer to verify compliance at all stages of construction, identifying deficiencies and documenting corrective actions to maintain project integrity and safety standards. The opportunity is classified as a subcontract under NAICS code 541330, and responses must be submitted by September 10, 2026, with the solicitation posted on July 28, 2026. Performance is expected to occur within the State of Utah, though specific location details are not provided. The contract does not indicate a set-aside designation or designated point of contact, and interested parties should refer to the official Bonfire link for submission guidelines and additional requirements.

General Info

Provide site inspection and quality assurance services for Utah construction projects by September 10, 2026.

Agency

UtahView Agency

NAICS

541330 - Engineering ServicesView NAICS

Place of Performance

UT, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 28

subcontract

Response DeadlineSep 10

Submission deadline

Response Deadline

09/10/2026, 06:00:00 PM UTCin about 1 month

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyUtah

ContactsNo contacts available

OfficeN/A

Organization / Agency

Utah

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Perform inspections and verify compliance with contract documents, codes, and regulations in coordination with DFCM and A/E.

Similar Contracts

Same NAICS industry code

MAGTF Staff Training Program (MSTP) Support ServicesThis solicitation is exclusively for Small Business SeaPort-NxG MAC holders, with no offers from non-MAC holders being considered. Proposals must be submitted through the Procurement Integrated Enterprise Environment (PIEE) Solicitation Module, requiring MAC holders to register for PIEE accounts to access the full RFP and submit responses. The requirement is to provide comprehensive support services for the Marine-Air Ground Task Force (MAGTF) Staff Training Program (MSTP), established under Marine Corps Order 1500.53B, to enhance the warfighting capabilities of senior commanders and staffs in Joint and Combined Task Force environments. Services span seven functional areas: Exercise Design, MAGTF Analytics, Modeling and Simulation, Documentation, Security, Command and Control/Information Management/Knowledge Management, and Communications and Information Systems, all governed by the Performance Work Statement and its Part 5 workbook. The contract is structured as a hybrid firm-fixed-price/cost-reimbursement instrument with a base period from March 27, 2027, through February 26, 2028, and up to five option periods extending performance through August 26, 2032. All work is to be performed at the Training and Education Command in Quantico, Virginia, with inspection and acceptance occurring at that location. Evaluation of proposals is based on three factors—Technical Expertise, Staffing Approach, and Price—with non-price factors being significantly more important than price, indicating a best-value trade-off selection process rather than lowest price technically acceptable. Offerors must demonstrate technical proficiency in specified PWS tasks, provide detailed staffing plans with qualified personnel and subcontractor information, and submit fair and reasonable pricing via the required Excel-based Pricing Proposal Workbook. Compliance with numerous FAR and DFARS clauses is mandatory, including protections for covered defense information, prohibitions on certain foreign-supplied telecommunications equipment, Buy American requirements, and trafficking in persons compliance. All offers must include current Unique Entity ID and CAGE codes, valid SAM registration, and attestations regarding small business status and socioeconomic certifications. Invoicing is exclusively through the Wide Area WorkFlow system using DoDAAC codes, and submissions require a two-step process: an initial written proposal with formatting restrictions and a final step involving PIEE upload and email submission of pricing, staffing matrices, and PowerPoint slides for oral presentations. Security requirements include adherence to DD Form 254, safeguarding controlled unclassified information, and identification of contractor personnel through badges and verbal disclosure. Subcontract

POSTED

about 4 hours ago

DEADLINE

Advance Notice: N6660426R3106 Code 45 Technical Engineering, Survivability, Testing, and Environmental Qualification Testing (EQT) Design (TESTED) ServicesThe U.S. Navy’s NUWC Division Newport is issuing a presolicitation for Technical Engineering, Survivability, Testing, and Environmental Qualification Testing (EQT) Design services under contract number N6660426R3106, with the solicitation set to be released in July 2026. This effort is designated as a Small Business Set Aside - Total, meaning only small businesses can compete, and it falls under NAICS code 541330 for Other Engineering Services. The work will involve providing engineered solutions to support system survivability, performance validation under extreme conditions, and comprehensive environmental qualification testing, ensuring military systems meet operational standards in harsh environments. All performance is expected to occur at Newport, Rhode Island, 02841. The primary point of contact for inquiries is Madison Rowland, who can be reached via email at madison.b.rowland.civ@us.navy.mil or by phone at 401-832-3648. The contract is managed under the Department of Defense, with the office located at the NUWC Division Newport facility in Rhode Island. This acquisition aims to secure qualified small business partners capable of delivering advanced testing and engineering support critical to maintaining naval system readiness and resilience. Prospective bidders should monitor the SAM.gov portal for the official solicitation, with the presolicitation notice available through the provided UI link to prepare for a competitive response.

Nuwc Division Newport

POSTED

about 4 hours ago

DEADLINE

MICROWAVE TUBE ENGINEERING SERVICEThe U.S. Naval Surface Warfare Center Crane is soliciting sole-source engineering support and gold tube testing services for microwave tubes under contract number N00164-26-Q-0254, with a closing date of 5 August 2026 at 12:00 PM Eastern Time. The requirement is designated as a sole-source procurement under FAR 13.106-1, as the services are critical to existing system integrations and have historically been provided by CPI Electron Device Business, with no intent to compete unless new information from other sources fundamentally alters the determination. All interested parties may submit capability statements, but the government retains full discretion to proceed without competition. Contractors must be currently registered in the System for Award Management (SAM) and must submit proposals via email to cassidy.k.shaw.civ@us.navy.mil by the deadline. The solicitation is issued under FAR Part 13, and no competitive set-aside is applicable; it falls under NAICS code 541330 for engineering services. All amendments or updates will be posted exclusively on SAM.gov, and it is the vendor’s responsibility to monitor that site. The point of contact for inquiries is Cassidy Shaw, and performance will take place at Crane, Indiana.

POSTED

about 4 hours ago

DEADLINE

Advanced Notice: Code 75 Engineering ServicesThe U.S. Navy’s Naval Undersea Warfare Center Division Newport is issuing an advanced notice for a potential contract under Code 75 Engineering Services, intended exclusively for small businesses as a total small business set aside. This presolicitation, identified by solicitation number N66604-26-R-3105 and posted on July 29, 2026, signals an upcoming opportunity for qualified small businesses to provide specialized engineering support services. The contract will be managed by the Department of Defense through the Nuwc Division Newport office located in Newport, Rhode Island, with no specific place of performance indicated beyond the agency’s base location. Primary point of contact for inquiries is Zachary Silveira, reachable at 401-832-5760 or zachary.g.silveira.civ@us.navy.mil, with Chelsea Isherwood serving as the secondary contact at 401-832-4381 or chelsea.a.isherwood.civ@us.navy.mil. While the NAICS code has not been specified, the nature of the work suggests engineering services critical to naval undersea systems. Contractors should prepare for proposal submission requirements aligned with federal small business eligibility guidelines and anticipate the opportunity to be formally solicited in the near future via the SAM.gov workspace linked in the notice.

Nuwc Division Newport

POSTED

about 4 hours ago

DEADLINE

Construction Management Services IDIQThe Port of Seattle is seeking qualified firms to provide comprehensive Construction Management services under an Indefinite-Delivery, Indefinite-Quantity (IDIQ) contract for a range of major construction projects. These services will support all phases of project execution, including planning, design, construction, and closeout, across multiple delivery methods such as Design Build, Progressive Design Build, and other alternative delivery models. The contractor will be responsible for ensuring projects adhere to authorized schedules, budgets, and quality standards while assisting the Port in delivering critical infrastructure. The work will be performed at various locations within the Port’s operational areas, with no specific geographic restrictions listed. The contract falls under NAICS code 541330, classifying it as Architectural, Engineering, and Related Services. The primary point of contact for inquiries is Hala Rabbo, reachable at 206-787-5565 or rabbo.h@portseattle.org, with additional support available from Project Manager Ann Davidson at 206-787-4070 or davidson.a@portseattle.org. The solicitation was posted on July 29, 2026, and is currently a forecast, indicating that formal solicitation documents will follow. Interested firms should monitor the Port’s official solicitation portal for further details and upcoming procurement steps.

Construction Management

POSTED

about 10 hours ago

DEADLINE

Retro-Commissioning, TAB, Controls, and Regulatory Support IDIQThe consultant will deliver retro-commissioning, test adjust and balance, controls, and regulatory support services across the facilities and infrastructure systems at Seattle-Tacoma International Airport, ensuring optimal performance of mechanical, HVAC, plumbing, lighting, direct digital controls, smoke control, and fire protection systems. The work centers on identifying and resolving operational deficiencies to enhance system efficiency, reliability, comfort, and longevity, all while maintaining compliance with safety and regulatory standards in a high-demand, 24/7/365 airport environment. Deliverables will be managed through Service Directives, requiring close collaboration with Aviation Facilities and Infrastructure to align execution with operational needs and performance goals. This contract is an indefinite-delivery, indefinite-quantity (IDIQ) vehicle issued by the Port of Seattle through its Aviation Facilities and Infrastructure division, classified under NAICS code 541330 for engineering services. Primary point of contact is Jason Gates, with Jim Farris serving as project manager, and all communications and inquiries should be directed through the provided contact details. The solicitation was posted in July 2026 and is intended to support ongoing and future infrastructure improvement initiatives at the airport, with performance centered on seamless integration within active airport operations without disruption.

Aviation Facilities & Infrastructure

POSTED

about 10 hours ago

DEADLINE

Electrical Engineering ServicesSaskatchewan Research Council is seeking proposals from qualified electrical engineering firms to provide professional services support at its Millar Avenue Facility. The solicitation, numbered 2627-014, was posted on July 28, 2026, with responses due by August 11, 2026. Proposals will be evaluated based on the firm’s experience, technical expertise, available resources, and overall suitability for the project. The selected vendor will work closely with SRC to define the specific tasks, scope, schedule, and budget following contract award. All work is to be performed at the Millar Avenue Facility in Saskatchewan, and inquiries should be directed to Roger Dauvin, the primary point of contact, via email or phone provided in the solicitation.

Saskatchewan Research Council

POSTED

about 17 hours ago

DEADLINE

Inspection and Acceptance Support ServicesThe contract titled Inspection and Acceptance Support Services requires the performance of pre-delivery inspections, quality assurance testing, and complete documentation to ensure all delivered items fully comply with contractual specifications. All inspections must be conducted at the final destination, necessitating precise coordination with relevant parties to schedule and execute assessments upon arrival. The work is intended to validate that goods meet established standards before formal acceptance, with thorough reporting required to substantiate compliance. This subcontract is issued by Dallas Area Rapid Transit under the NAICS code 541330 and is open for response until the deadline of August 4, 2026. The place of performance is not specified in detail, but the work will occur at the delivery site within Texas. There is no set-aside designation, and the opportunity is posted on the BonfireHub platform with no designated point of contact listed. Interested parties must submit proposals before the deadline to be considered for award.

Dallas Area Rapid Transit

POSTED

about 18 hours ago

DEADLINE

Disadvantaged Business Enterprise (DBE) Participation and OutreachThe contract requires providers to deliver DBE-certified subcontracting services or support outreach and reporting efforts aimed at achieving the New Orleans Regional Transit Authority’s 32% system-wide Disadvantaged Business Enterprise participation target on federally funded transit projects. Entities must demonstrate the capability to either perform work as a DBE subcontractor or actively facilitate the inclusion of DBE firms through coordination, monitoring, and documentation that aligns with federal compliance standards. The effort is focused on ensuring equitable opportunities for disadvantaged businesses while meeting federal reporting obligations tied to transit infrastructure funding. This opportunity is categorized under NAICS code 541330 and is open for responses until August 25, 2026, with a posting date of July 28, 2026. Participants must be prepared to engage in detailed reporting and outreach activities that support the agency’s goal of equitable participation, with no specific set-aside designation outlined. All work is to be performed in support of RTA’s federally funded transit initiatives within the Louisiana region, and interested parties must ensure their DBE certification is current and recognized under federal guidelines. The contract does not specify a physical location for performance, indicating that services may extend across the agency’s broader transit network.

New Orleans Regional Transit Authority

POSTED

about 19 hours ago

DEADLINE

Engineering Design and Technical DocumentationThe contract requires the development of engineering drawings, technical specifications, operation and maintenance manuals, and related technical deliverables for experimental components of a transit system, all of which must comply with Federal Transit Administration and federal data rights standards. The work is part of a subcontract under the New Orleans Regional Transit Authority, with technical documentation needing to meet rigid federal compliance benchmarks to ensure interoperability, safety, and long-term maintainability of novel transit technologies. The deliverables are critical to supporting federally regulated public transportation innovation and must be structured to enable future oversight, audits, and data reuse under federal guidelines. The solicitation was posted on July 28, 2026, with a submission deadline of August 25, 2026, and is classified under NAICS code 541330 for engineering services. The place of performance and specific office details are not provided, but the work is tied to the Louisiana operations of the New Orleans Regional Transit Authority. The contract emphasizes adherence to federal data rights, meaning the recipient must manage intellectual property and data ownership in strict accordance with federal regulations, potentially limiting exclusive control over generated materials. Only responses submitted through the designated portal before the deadline will be considered.

New Orleans Regional Transit Authority

POSTED

about 19 hours ago

DEADLINE

Hampton Middle School Renovation Architectural and Engineering DesignPrince William County Schools is seeking qualified architectural and engineering firms to provide comprehensive design services for the renovation of Hampton Middle School located at 14800 Darbydale Ave. in Woodbridge, Virginia. The solicitation, identified as RFP-125217, was posted on July 28, 2026, with a response deadline of August 25, 2026, at 7:00 PM Eastern Time. This procurement is categorized under a state and local education (SLED) agency and does not specify a set-aside designation or NAICS code. Proposals must address all aspects of the facility’s renovation including but not limited to facility planning, structural, mechanical, electrical, and plumbing systems integration, and compliance with current building codes and educational standards. Lesley Dean of Prince William County Schools is the designated point of contact for inquiries and can be reached via email at deanlm@pwcs.edu or by phone at 703-791-8740. All submissions must be submitted through the official vendor portal linked in the solicitation details.

Prince William County Schools

POSTED

about 20 hours ago

DEADLINE

City of Oglethorpe CDBG 2027 RFPThe City of Oglethorpe, through the River Valley Regional Commission, is seeking qualified firms to provide engineering services for public infrastructure improvements including sewer, water, street, and drainage systems as part of its CDBG 2027 initiative. Proposals must be submitted by 3:00 p.m. on August 31, 2026, to the River Valley Regional Commission office located at 710 Front Avenue in Columbus, Georgia. The contract will be awarded to the most responsible offeror whose proposal is deemed most advantageous based on technical merit, experience, and value. This solicitation is designated as a Section 3 Covered Contract, which prioritizes opportunities for businesses that meet Section 3 criteria, encouraging participation from eligible local and disadvantaged business concerns. All inquiries and submissions should be directed to Will Griggs at the provided contact information, and the full solicitation details are available through the official state procurement portal.

River Valley Regional Commission

POSTED

about 22 hours ago

DEADLINE

in about 1 month

More opportunities from Utah

Same awarding agency

GJ27-8 UCA Birch Creek Modular Radio Communications ShelterThe Utah Communications Authority is seeking proposals for the GJ27-8 solicitation titled GJ27-8 UCA Birch Creek Modular Radio Communications Shelter, with questions due by August 2 2026 at 3 PM Mountain Time and responses due by August 5 2026 at 3 PM Mountain Time, both submitted through the U3P platform. Submissions are subject to a strict 1GB file size limit per upload, and vendors must ensure full compliance with all requirements outlined in the official solicitation document, as this procurement is managed solely by the Utah Communications Authority and not by the Division of Purchasing. The contract award will not be published on the public posting site and vendors must contact the designated office directly for award information. The solicitation will be closed upon the deadline but responses will still be evaluated according to the criteria specified in the document. The place of performance is in Utah, and vendors are responsible for reviewing all terms, conditions, and procedures independently to ensure timely and accurate submission.

Prefabricated Metal Building and Component Manufacturing

POSTED

about 17 hours ago

DEADLINE

Safety and Hazard Management ServicesThe contract titled Safety and Hazard Management Services requires the implementation of comprehensive site safety protocols, including the conduct of thorough hazard assessments and ongoing enforcement of OSHA regulations alongside project-specific safety standards. The work is focused on ensuring full compliance with federal and local safety requirements to protect personnel and maintain operational integrity across all assigned sites. This subcontract is open for bidding with a response deadline of September 10, 2026, and falls under the NAICS code 541690 for other scientific and technical consulting services. The solicitation is issued by the state of Utah through its designated agency, with no specific location or point of contact provided, and the opportunity is accessible via the BonfireHub platform. The contract does not specify a set-aside type or organizational restrictions, leaving it open to qualified contractors regardless of size or ownership structure.

Other Scientific and Technical Consulting Services

POSTED

about 18 hours ago

DEADLINE

in about 1 month

Material and Equipment Supply (General)The contract is for the supply of certified construction materials and equipment, including structural steel, roofing, and specialty finishes, as outlined in the project specifications. It is structured as a subcontract with a North American Industry Classification System code of 332311, indicating involvement in metal fabrication for building construction. The opportunity was posted on July 28, 2026, and responses are due by September 10, 2026, at 6:00 PM. The Utah agency is managing the solicitation, though specific location details for performance or contact information are not provided. All materials must meet certified standards required for the construction scope, and bidders are expected to comply with all technical and quality assurance stipulations without explicit set-aside provisions outlined.

Prefabricated Metal Building and Component Manufacturing

POSTED

about 18 hours ago

DEADLINE

in about 1 month

Electrical Systems InstallationThe contract titled Electrical Systems Installation seeks a subcontractor to provide comprehensive installation of power, lighting, controls, and low-voltage systems necessary for the proper operation and inspection of a facility. The work encompasses all electrical infrastructure required to support functionality and compliance, including wiring, circuitry, switching, monitoring systems, and integrated control networks. The solicitation is open for responses until September 10, 2026, with a posting date of July 28, 2026, and is classified under NAICS code 238210 for electrical contractors. While the specific location of performance is not detailed, the contracting entity is the state of Utah, and the opportunity is accessible through the Utah Bonfire Hub platform. No set-aside status or additional organizational details are provided, indicating the contract is open to general qualified subcontractors without specific socioeconomic preferences.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

about 18 hours ago

DEADLINE

in about 1 month

Mechanical Systems InstallationThe contract involves the installation of HVAC, plumbing, and process piping systems in accordance with approved project drawings and all applicable codes and standards. The work is classified under NAICS code 238220 and is structured as a subcontract, indicating it is part of a larger construction or facility project managed by a prime contractor. The opportunity was posted on July 28, 2026, with a response deadline set for September 10, 2026, giving potential bidders approximately six weeks to prepare and submit their proposals. The contracting entity is the State of Utah, though specific location details for the place of performance are not provided, suggesting the work may occur at one or more sites within the state. All installations must comply with current regulatory requirements and technical specifications to ensure system functionality, safety, and code adherence.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 18 hours ago

DEADLINE

in about 1 month

Concrete Supply and PlacementThe contract titled Concrete Supply and Placement requires the full scope of concrete work for structural and site improvements, encompassing formwork construction, concrete pouring, proper curing methods, and final finishing to meet specified standards. All work must be completed in accordance with industry best practices and project requirements, ensuring durability and safety for both structural elements and site features. The subcontract is open for bidding with a response deadline of September 10, 2026, and is classified under NAICS code 238110, indicating it aligns with concrete work services. The opportunity is managed by the state of Utah, with performance expected to take place within its jurisdiction, though specific location details are not provided. Bidders must be prepared to handle all logistics, materials, labor, and equipment necessary to deliver the required concrete services without reliance on additional contractual support.

Poured Concrete Foundation and Structure Contractors

POSTED

about 18 hours ago

DEADLINE

in about 1 month

General Construction ManagementThe contract titled General Construction Management involves comprehensive oversight of all construction activities, including scheduling, coordination with subcontractors, ensuring regulatory compliance, and delivering accurate as-built documentation. The role requires active management throughout the project lifecycle to maintain timelines, quality standards, and adherence to applicable codes and protocols. This is a subcontract opportunity under NAICS code 236220, indicating classification within nonresidential building construction, and is being solicited by the state of Utah under its agency name. The opportunity was posted on July 28, 2026, with a firm response deadline of September 10, 2026, at 6:00 PM. The place of performance and specific office address details are not provided, but the solicitation is accessible through the Utah BonfireHub portal for further inquiry and submission.

Commercial and Institutional Building Construction

POSTED

about 18 hours ago

DEADLINE

in about 1 month

DFCM Construction - VBS Construction Stage II - Invitation to Interview - Department of Veterans and Military Affairs - William E. Christofferson Salt Lake Veterans Home - 23383490This solicitation is Stage II of a two-phase selection process for the construction of a 105-bed skilled nursing facility in West Valley City, Utah, to be managed by the Utah Department of Veterans and Military Affairs. Only contractors who were shortlisted during Stage I, the Request for Proposals, are eligible to participate in this stage, which requires them to attend an interview and submit detailed cost proposals. The project has an estimated construction cost of seventy-three million dollars, and performance must occur at the designated work site, with all labor, materials, and services delivered as directed by the Division of Facilities Construction and Management (DFCM). Submission of proposals is due by September 10, 2026, and must be delivered via registered mail or email, with no online portal specified. While no formal solicitation number is provided, the reference number DA26055-Stage II is used internally. The award basis, evaluation factors, and specific technical criteria are not outlined in the available documentation, and no federal FAR clauses are applicable—instead, the contract follows state-level provisions with internal clause numbering such as Section 11.5 and 11.6, which mandate non-discrimination, compliance with applicable laws, and adherence to ethical standards. The contractor is responsible for all aspects of construction including adherence to approved contract documents, drawings, specifications, and amendments, and must comply with local and state regulations. Deliverables include timely submittals of shop drawings, product data, samples, as-built documentation, and compliance with a detailed Critical Path Method schedule to achieve Substantial Completion within the Contract Time. Inspection and acceptance occur at the project site and are conducted jointly by DFCM, the Contractor, and the Architect/Engineer, with the Contractor bearing all costs for re-inspections and corrections. The contract requires performance and payment bonds, mandatory insurance coverage, lien waivers, and affidavits of paid payrolls and bills as conditions of payment. A one-year warranty on materials and workmanship is stipulated, along with indemnification clauses to protect the state from claims arising from the Contractor’s operations. Subcontractors must be pre-approved and disclosed prior to award, with exceptions permitted under specified conditions. No information on FOB terms, specific accounting codes, electronic invoicing systems, COR/COTR contacts, or packaging and marking standards is included. The contract also imposes no requirement for Unique Entity ID, CAGE code, or socioeconomic certifications, and does not include options, key personnel designations, or security clearance

Commercial and Institutional Building Construction

POSTED

about 18 hours ago

DEADLINE

in about 1 month

General Subcontractor Management and CoordinationThe contract entails comprehensive oversight and coordination of multiple subcontractors across various operational domains including scheduling, logistics, safety, and quality control. The scope requires active management to ensure seamless integration of subcontractor activities, timely project progression, adherence to safety protocols, and consistent delivery of high-quality work standards. The effort is centered around maintaining alignment among all parties involved to meet project objectives without direct supervision of the primary contractor. This opportunity is classified under NAICS code 238990 and is open for responses until August 24, 2026. It is issued by the State of Utah under a subcontract arrangement, with no set-aside provisions specified. All work is expected to be performed within Utah, though exact location details are not provided. Interested parties must engage through the designated online portal to submit proposals by the deadline.

All Other Specialty Trade Contractors

POSTED

about 19 hours ago

DEADLINE

As-Built Documentation and Record DrawingsThe contract seeks a subcontractor to produce certified as-built drawings that accurately reflect the final field conditions and all changes made during construction. These drawings must document modifications, deviations, and alterations from the original design specifications to ensure a complete and precise record of the built environment. The work is tied to a specific construction project under the jurisdiction of Utah and requires adherence to professional standards for accuracy, certification, and timely delivery. The solicitation is open as a subcontract opportunity with a response deadline of August 24, 2026, and is classified under NAICS code 541370, which pertains to surveying and mapping services. All deliverables must be submitted in a format suitable for official records and must be verified to reflect the actual conditions on-site following construction completion.

Surveying and Mapping (except Geophysical) Services

POSTED

about 19 hours ago

DEADLINE

Shop Drawing and Submittal CoordinationThe contract requires the preparation, coordination, and management of all shop drawings, product data, and samples necessary for approval by the architect or engineer. This role involves ensuring that all submittals are accurately compiled, consistently formatted, and timely submitted to meet project schedules and compliance standards. The contractor must maintain clear communication with design teams and subcontractors to resolve revisions, track approval statuses, and document updates throughout the construction lifecycle. This is a subcontract opportunity under NAICS code 541611, posted by the state of Utah with a response deadline of August 24, 2026. The work is intended to support construction projects under Utah’s jurisdiction, though specific project locations and performance details are not provided. Interested parties must submit proposals by the deadline through the designated portal at the provided link, and the engagement will involve managing documentation workflows critical to regulatory and design compliance, with emphasis on accuracy, timeliness, and attention to detail in all submittal processes.

Administrative Management and General Management Consulting Services

POSTED

about 19 hours ago

DEADLINE

Critical Path Method (CPM) Scheduling and Project PlanningThe contract titled Critical Path Method (CPM) Scheduling and Project Planning requires the development and ongoing maintenance of a detailed CPM schedule that includes clearly defined milestones, real-time progress tracking, and the seamless integration of all change directives as they arise. The work will involve creating a dynamic scheduling framework that supports project planning, monitors timeline adherence, and adapts to evolving project conditions to ensure timely and efficient delivery. The contractor must possess the technical expertise to manage complex scheduling workflows and provide consistent updates that reflect current project status and modifications. This is a subcontract opportunity posted by the state of Utah under NAICS code 541611, with a response deadline of August 24, 2026. The solicitation number is not provided, and no set-aside type or organizational restrictions are specified. Performance location details are not defined, and no point of contact information is included in the posting. Interested parties must submit proposals through the provided Utah BonfireHub link prior to the deadline, ensuring alignment with the technical requirements for CPM scheduling and project planning services.

Administrative Management and General Management Consulting Services

POSTED

about 19 hours ago

DEADLINE