Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Site Preparation and Groundwork

Active

State & Local

Response Deadline07/30/2026, 06:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract titled Site Preparation and Groundwork involves the full scope of earthwork and foundational activities necessary to prepare a site for playground safety surfacing. This includes clearing vegetation and debris, grading the terrain to meet specified slope and drainage requirements, excavation to achieve proper depth for the surfacing system, compaction of underlying soil layers to ensure stability, and installation of a uniform base layer that supports the final safety surface. All work must comply with industry standards for playground safety and structural integrity, with attention to proper drainage and load-bearing capacity. The contract is classified as a subcontract under NAICS code 237990, indicating it is part of a larger infrastructure or construction project managed by MPTAP in Mississippi. The solicitation was posted on July 16, 2026, with responses due by July 30, 2026, and no set-aside provisions are specified, meaning any qualified subcontractor may bid. The place of performance and point of contact details are not provided, but the official bid details can be accessed through the Mississippi Department of Finance and Administration’s public contract portal.

General Info

Site preparation and groundwork for playground safety surfacing including grading, excavation, compaction, and base layer installation.

Agency

Mississippi → MPTAPView Agency

NAICS

237990 - Other Heavy and Civil Engineering ConstructionView NAICS

Place of Performance

MS, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 16

subcontract

Response DeadlineJul 30

Submission deadline

Response Deadline

07/30/2026, 06:00:00 PM UTCin 6 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyMississippi → MPTAP

ContactsNo contacts available

OfficeN/A

Organization / Agency

Mississippi → MPTAP

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Clearing, grading, excavation, compaction, and base layer preparation for playground safety surfacing.

Similar Contracts

Same NAICS industry code

AIRFIELD 2028 ALL PROJECTS (AIP / AUI / CIRCUITS / FOD) CombinedThe contract encompasses a comprehensive set of airfield infrastructure upgrades at the Port of Seattle, focusing on safety, efficiency, and regulatory compliance. Key work includes replacing aging airfield lighting circuits with low megger readings with new LED lighting fixtures and signs to enhance visibility and reduce energy consumption. Alongside this, failing pavement sections and critical underground utilities will be reconstructed to ensure structural integrity and operational reliability. Wildlife hazard mitigation measures are integral to the project, involving removal of turf edge dams along runways, taxiways, and access roads, installation of anti-perching devices on airfield signage, and addressing ponding through regrading and new storm drainage infrastructure to deter bird and animal activity near flight operations. Additionally, deteriorating flush fire hydrant access hatches will be replaced to guarantee prompt and unimpeded access for emergency response personnel. The work is being managed by the Aviation Project Management Group under the Port of Seattle, with Yanet Maldonado as the primary point of contact, and is part of a broader long-term infrastructure renewal plan identified under NAICS code 237990.

Aviation Project Management Group

POSTED

about 3 hours ago

DEADLINE

AIRFIELD 2029 ALL PROJECTS (AIP / AUI / CIRCUITS / FOD) CombinedThe contract entails a comprehensive modernization and safety enhancement initiative at the Port of Seattle’s airfield, focusing on critical infrastructure upgrades. Key elements include replacing aging airfield lighting circuits with low megger readings with new LED fixtures and signs to improve reliability and energy efficiency, alongside the replacement of deteriorating pavement and essential utility systems to ensure operational integrity. Wildlife hazard mitigation is addressed through the removal of turf edge dams along runways, taxiways, and access roads, installation of anti-perching devices on airfield signage, and the implementation of regressing and storm drainage infrastructure to eliminate ponding that attracts hazardous wildlife. Additionally, failing flush fire hydrant access hatches will be replaced to ensure rapid and safe access for emergency response personnel. The work is part of the broader AIRFIELD 2029 ALL PROJECTS initiative, managed by the Aviation Project Management Group under the Port of Seattle, with Yanet Maldonado serving as the primary point of contact for inquiries and coordination.

Aviation Project Management Group

POSTED

about 3 hours ago

DEADLINE

AIRFIELD 2030 ALL PROJECTS (AIP / AUI / CIRCUITS / FOD) CombinedThe Port of Seattle’s Aviation Project Management Group is forecasting a comprehensive airfield modernization initiative under the AIRFIELD 2030 ALL PROJECTS contract, targeting critical infrastructure upgrades across multiple systems. Key components include the replacement of aging airfield lighting circuits with low megger readings, installation of energy-efficient LED lighting fixtures and signage, and the rehabilitation of deteriorating pavement and essential utilities. The project also encompasses wildlife hazard mitigation through the removal of turf edge dams along runways, taxiways, and access roads, installation of anti-perching devices on airfield signage, and the regrading of problem areas accompanied by new storm drainage infrastructure to eliminate ponding. Additionally, failing flush fire hydrant access hatches will be replaced to ensure emergency response readiness. The work is classified under NAICS code 237990 and is scheduled for solicitation in 2026 with Yanet Maldonado of the Port of Seattle serving as the primary point of contact.

Aviation Project Management Group

POSTED

about 3 hours ago

DEADLINE

Jack Block Park Pier ReplacementThe contract involves the demolition of the existing end-of-life pier at Jack Block Park and the construction of a new pier, along with associated repairs to the pier plaza. This project is being managed by the Port of Seattle under the Northwest Seaport Alliance and is classified under NAICS code 237990, indicating it falls within other heavy and civil engineering construction. The work will require careful planning and execution to ensure environmental and structural standards are met during removal and replacement. The project is currently in the forecasting stage, with no solicitation number assigned yet, and potential bidders are encouraged to monitor updates through the official portal. Primary point of contact for inquiries is Yanet Maldonado, with Valerie Huffman serving as the project manager, both reachable through official Port of Seattle contact details.

Northwest Seaport Alliance (NWSA)

POSTED

about 3 hours ago

DEADLINE

2027 Airfield Project - Contract 1The contract pertains to a comprehensive airfield modernization project scheduled for 2027, led by the Port of Seattle’s Aviation Project Management Group, aimed at upgrading critical airfield infrastructure to enhance safety, efficiency, and compliance. Key work includes replacing aging lighting circuits with low megger readings with new LED fixtures and signage, improving visibility and reducing maintenance demands. The project also involves the full replacement of deteriorating pavement sections and essential utilities to maintain structural integrity and operational continuity across the airfield. Additional scope covers wildlife hazard mitigation through the removal of turf edge dams along runways, taxiways, and access roads, installation of anti-perching devices on airfield signs to deter birds, and the construction of new storm drainage infrastructure to eliminate ponding by regrading affected areas. Fire hydrant access hatches that are failing will be replaced to ensure rapid emergency fire response access. The contract, identified under NAICS code 237990, is publicly forecasted with point of contact information provided by Jay Kim and Mengqi Wu at the Port of Seattle, and all work is expected to be performed at the airport facility under their jurisdiction.

Aviation Project Management Group

POSTED

about 3 hours ago

DEADLINE

2027 Airfield Project - Contract 2The contract titled 2027 Airfield Project - Contract 2, issued by the Port of Seattle through the Aviation Project Management Group, encompasses a broad range of critical airfield infrastructure upgrades. Work includes replacing aging airfield lighting circuits that exhibit low megger readings with modern LED fixtures and signage to improve reliability and energy efficiency. Pavement and utility systems showing signs of failure will be fully replaced to ensure operational safety and longevity. Wildlife hazard mitigation efforts involve removing turf edge dams along runways, taxiways, and access roads, installing anti-perching devices on airfield signs to deter birds, and addressing ponding issues through regrading and the installation of new storm drainage infrastructure. Additionally, failing flush fire hydrant access hatches will be replaced to maintain emergency response readiness. The contract is classified under NAICS code 237990 and was posted on July 24, 2026, with primary point of contact Moraa Omwega and project manager David Neds available for inquiries.

Aviation Project Management Group

POSTED

about 3 hours ago

DEADLINE

T18 Lift Station ReplacementThe Port of Seattle, through its Waterfront Project Management division, is forecasting the complete replacement of the lift station located at the north lunchroom in Terminal 18. This project is categorized under NAICS code 237990, indicating it falls within other heavy and civil engineering construction, and is intended to address the need for a full system overhaul to ensure operational reliability and compliance with current infrastructure standards. There is no set-aside designation specified, meaning the contract is open to all eligible contractors without preference based on business size or socioeconomic status. The primary point of contact for inquiries is Angela Peterson, reachable via phone or email, with Crystal Cuellar serving as the project manager. The solicitation remains in forecast status with no solicitation number assigned yet, and no official deadline or bid submission date has been published. The place of performance is clearly identified as Terminal 18, though specific city and state details are not provided in the data. Interested parties should monitor the official portal linked for updates on the formal solicitation release and submission requirements.

Waterfront Project Management

POSTED

about 3 hours ago

DEADLINE

Həʔapus Park Redevelopment - ConstructionThe Həʔapus Park Redevelopment - Construction project aims to enhance public access and amenities at the park through a range of upgrades including new restrooms, improved pathways and lighting, a boot washing station, dog-friendly features, wayfinding and interpretive signage, and a hand-carrying boat launch. Work will be conducted in both upland and in-water areas, carefully phased to comply with environmental permitting requirements and to avoid disruption to tribal fisheries, with substantial completion targeted for the second quarter of 2028. The project is managed by the Port of Seattle under the Waterfront Project Management division, with primary contact Angela Peterson and Project Manager Julie Yun overseeing implementation. The initiative falls under NAICS code 237990, reflecting its classification as other heavy and civil engineering construction, and is part of a broader effort to improve waterfront infrastructure while respecting ecological and cultural sensitivities.

Waterfront Project Management

POSTED

about 3 hours ago

DEADLINE

2027-013 LYNCHBURG HERITAGE PARK PHASE 1The City of Lynchburg, Virginia is soliciting bids for Phase 1 of the Lynchburg Heritage Park construction project under solicitation number IFB-124983, posted on July 24, 2026, with a response deadline of August 27, 2026. This project encompasses a comprehensive set of site improvements including demolition and grading, installation of stormwater management and erosion control systems, new concrete walks and stairs with handrails, a newly constructed parking lot, creation of a meadow area, installation of separate electrical conduit and connections not tied to multipurpose lighting, and establishment of stabilized turf. All work must be performed in accordance with specifications tied to the park’s development goals in Lynchburg, VA, with any addenda exclusively posted on the City’s official bids webpage. The solicitation is categorized under SLED government procurement, with no specified set-aside, and all inquiries should be directed to Matthew Marsteller at the provided contact details.

City of Lynchburg

POSTED

about 7 hours ago

DEADLINE

in about 1 month

Linklater Core Park ConstructionThe City of Saskatoon is inviting qualified contractors to bid on the construction of Linklater Core Park, the central park at the Aspen Ridge development. The procurement is conducted under solicitation number RFQ26-0065, with all bidding activities required to take place through the City’s electronic tendering system at saskatoon.bidsandtenders.ca, where potential bidders must register to access documents, submit questions, receive updates, and formally submit proposals. The deadline for bid submission is 2:00:59 p.m. Saskatchewan Time on Wednesday, August 12, 2026, and award notifications will be posted on the same platform. The project falls under the broader jurisdiction of the Saskatchewan Public Sector, with Pam Radke named as the primary point of contact for inquiries via phone or email. All responses must comply with the procedural requirements outlined in the solicitation documents, and no alternative submission methods will be accepted. The place of performance is specified as Saskatoon, Saskatchewan, with no set-aside provisions indicated for small businesses or other categories. Interested parties are advised to review the full solicitation details on the City’s bidding portal to ensure alignment with technical, financial, and compliance expectations prior to submission. Failure to register on the electronic system or to meet the stated deadline will disqualify a bidder from consideration.

City of Saskatoon

POSTED

about 7 hours ago

DEADLINE

FY26 Black Rock Lock Damage RepairThe U.S. Army Corps of Engineers, Buffalo District, is seeking bids for the repair of damage to the Black Rock Lock in Buffalo, New York, caused by an oversized vessel colliding with the operating gate emergency egress ladder and fendering. The work must be completed in accordance with the technical specifications outlined in Section 3 of the Statement of Work and is classified under NAICS code 237990 for Other Heavy and Civil Engineering Construction. This is a 100% Small Business Set-Aside opportunity, reserved exclusively for small businesses as defined by the SBA. A mandatory site visit is scheduled for July 27, 2026, at 3:30 PM EDT at Black Rock Lock, with the GPS address listed as 62 Dann Street, Buffalo, NY 14217. All proposals must be submitted through the official Procurement Integrated Enterprise Environment (PIEE) website at https://piee.eb.mil/; no paper, fax, or telephone submissions will be accepted. Bidders must have an active registration in the System for Award Management (SAM) and must monitor PIEE for any amendments or updates to the solicitation, as these are the only official sources for changes. The solicitation number is W912P426BA012, and responses are due by July 29, 2026, at 6:00 PM EDT. Technical questions must be submitted via the Bidder Inquiry system on ProjNet using the provided key, but proposals cannot be submitted through ProjNet. Primary point of contact for inquiries is Andrew Hewitt, reachable at 716-339-3307 or andrew.b.hewitt@usace.army.mil.

W072 Endist Buffalo

POSTED

about 10 hours ago

DEADLINE

Juniper Springs BoardwalkThe Juniper Springs Boardwalk project, solicited under number 12445226Q0008, is a total small business set-aside under NAICS code 237990 with a small business size standard of $45 million, targeting the removal of an existing boardwalk and construction of a new modular system with post-on-pin foundations within the Ocala National Forest near Silver Springs, Florida. The scope includes specialty structures such as overlooks, a kayak launch, and a pedestrian truss bridge, with strict requirements for environmental protection including a Stormwater Pollution Prevention Plan, containment protocols for equipment near water, and adherence to habitat preservation measures. Work must comply with ADA standards per the Florida Building Code 8th Edition (2023), using slip-resistant surfaces, proper deck slopes, and accessible transitions. The contract mandates compliance with Davis Bacon wage rates for Marion County, prevailing labor standards, and federal anti-discrimination laws including Executive Orders 14168 and 14173, along with Title VI and Title IX. The offeror must submit a technical approach, past performance questionnaire, quality control plan, and detailed pricing through Attachment 1, adhering to strict formatting guidelines including page limits, font size, and file type for each volume of the proposal. Proposals must be submitted in sealed envelopes by August 17, 2026, at 2:00 PM ET, following an extension from the original August 10 deadline, and must remain firm for 90 days. The government will evaluate offers based on technical merit as the primary factor, with past performance and price serving as pass/fail gates—any failure to meet acceptable or neutral past performance or fair and reasonable pricing will disqualify an offeror. The contract includes FAR clauses covering inspection, changes, wage requirements, whistleblower protections, anti-trafficking, accelerated payments to small subcontractors, and warranty of construction, supplemented by agency-specific requirements for DEI compliance and contract administration through USDA-FS CSA EAST 12 in Atlanta, Georgia. Site visits are encouraged, with RSVP required by email to Jalisa Sims, and the project has an estimated value between $5 million and $10 million, with performance required to commence within 10 days of notice to proceed and complete within 365 calendar days, including final site cleanup.

Csa East 12 Usda-Fs

POSTED

about 10 hours ago

DEADLINE

More opportunities from Mississippi → MPTAP

Same awarding agency

SOLE SOURCE REQUEST TO PURCHASE FluidMechantronix Process Automation SystemMississippi State University is seeking to procure the FluidMechantronix Process Automation System through a sole source request, identified by solicitation number 9250-27-R-RFIN-00005, with a posted date of July 24, 2026, and a response deadline of August 7, 2026. The procurement is classified under a state, local, or educational entity type and is being managed by the Mississippi State University procurement office, with Debra Raines listed as the primary point of contact reachable at draines@procurement.msstate.edu. The system is required for performance within the state of Mississippi, and the request specifies that the FluidMechantronix system is the only suitable solution due to its unique proprietary capabilities, which preclude competition. No set-aside designation or NAICS code is provided, indicating the procurement is not subject to specific small business or diversity preferences. Bidders must submit responses by the deadline to be considered, and all information related to the solicitation is accessible through the official university contract portal.

Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

about 4 hours ago

DEADLINE

Domestic Manufacturing and Sourcing VerificationThe contract requires verification and documentation that all aerial lifts and their components are domestically manufactured, with a focus on ensuring full compliance with domestic sourcing requirements. This includes conducting thorough supply chain audits to trace the origin of every part and component, and obtaining official origin certifications that confirm the materials and assembly processes occur entirely within the United States. The subcontractor must provide detailed evidence of manufacturing locations, supplier provenance, and chain-of-custody records to satisfy federal and state domestic content mandates. The solicitation is issued by the Mississippi Department of Transportation under NAICS code 423830 and is open for submissions until August 12, 2026. The performance location and specific delivery details are not specified, but the work revolves around compliance certification rather than physical delivery or installation. The contract is structured as a subcontract, suggesting it supports a larger procurement initiative, and while no set-aside designation is indicated, adherence to domestic sourcing rules remains central to eligibility and award consideration.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

DEADLINE

Equipment Compliance and Certification SupportThe contract seeks technical documentation and certification support to ensure aerial lift equipment complies with MDOT, ANSI A92.2, and applicable federal regulatory standards. The work involves preparing and verifying detailed technical records, certification packages, and compliance documentation required for operational approval and safety oversight. All deliverables must align with established industry and state regulations to guarantee the equipment meets mandated safety and performance criteria. This subcontract opportunity is open for response until August 12, 2026, and is classified under NAICS code 541330 for engineering services. The contracting agency is the Mississippi Department of Transportation, with performance expected to support state transportation objectives. While specific location details are not provided, the work likely involves collaboration with state agencies and equipment manufacturers to validate compliance across the state’s aerial lift fleet. Interested parties must submit proposals by the deadline to be considered for award.

Engineering Services

POSTED

DEADLINE

Truck-Mounted Aerial Platform Lift Supply and DeliveryThe contract calls for the supply, assembly, and delivery of a truck-mounted aerial platform lift with a 62-foot working height, fully compliant with ANSI A92.2 standards and specified hydraulic system requirements. The equipment must be domestically manufactured and ready for immediate deployment, with all components meeting rigorous safety and performance benchmarks. The assembly process must be completed prior to delivery to ensure operational readiness upon arrival at the designated location. This subcontract, posted by the Mississippi Department of Transportation on July 23, 2026, requires responses by August 12, 2026, under NAICS code 336120 for motor vehicle body manufacturing. While no specific place of performance or point of contact is listed, the scope implies delivery statewide to support state infrastructure and maintenance operations. The bidding process is open without set-aside restrictions, and interested parties must submit proposals through the official state procurement portal by the stated deadline to qualify for award consideration.

Heavy Duty Truck Manufacturing

POSTED

DEADLINE

Compliance Documentation and Technical ManualsThe contract solicits the preparation and delivery of printed compliance documentation, technical manuals, service bulletins, and safety instructions aligned with ANSI/SAIA A92.2 standards and Mississippi Department of Transportation requirements. All materials must meet precise technical and regulatory specifications to ensure safety, functionality, and regulatory adherence for equipment and operations under MDOT oversight. The work involves accurate formatting, production, and timely distribution of printed publications that serve as critical references for technicians, operators, and compliance personnel. This is a subcontract opportunity with a NAICS code of 541921, posted on July 23, 2026, and requiring responses by August 12, 2026. While no set-aside type is designated, the contract falls under the jurisdiction of the Mississippi Department of Transportation and is intended for performance in alignment with state transportation protocols. The place of performance and point of contact details are not specified, but interested parties must review the full solicitation through the provided Mississippi government link to understand submission guidelines and any unlisted technical or logistical expectations.

Photography Studios, Portrait

POSTED

DEADLINE

Onboard Toolboxes and Retractable Reels SupplyThe contract seeks the supply of three weather-resistant onboard toolboxes and two retractable reels—one electrical and one air—designed for integration with truck chassis to support field technicians. These items must be durable enough to withstand harsh environmental conditions encountered during outdoor operations, ensuring reliable access to tools and utilities in the field. The equipment must be fully compatible with standard truck chassis configurations to enable seamless installation and operational readiness. The solicitation is issued as a subcontract under NAICS code 339999 and is managed by the Mississippi Department of Transportation. Offers are due by August 12, 2026, with the opportunity posted on July 23, 2026. While specific performance locations and point of contact details are not provided, the deliverables are intended for use in Mississippi-based field operations. All submissions must meet technical and durability requirements to ensure long-term functionality and safety in demanding work environments.

All Other Miscellaneous Manufacturing

POSTED

DEADLINE

Steel Personnel Platform FabricationThe Mississippi Department of Transportation is soliciting a subcontract for the fabrication of a steel personnel platform rated for a 600-pound capacity, designed to safely support workers during elevated operations. The platform must include integrated safety harnesses and lanyards to ensure fall protection compliance, along with secure, code-compliant access points for reliable entry and exit. The work falls under NAICS code 332312, indicating specialized metal fabrication services, and requires adherence to strict structural and safety standards. All bids must be submitted by August 12, 2026, with the project anticipated to take place within Mississippi, though the exact location has not been specified. The contract posting is available through the state’s official bid portal, and interested parties should review all technical and regulatory requirements prior to submission.

Fabricated Structural Metal Manufacturing

POSTED

DEADLINE

Emergency Lowering System IntegrationThe contract seeks the supply and integration of a fail-safe emergency lowering system designed to ensure the safe, controlled descent of a platform in the event of hydraulic or power failure. This system must function autonomously without relying on external power or fluid pressure, guaranteeing operational safety under critical failure scenarios. The technology must be compatible with existing platform infrastructure and meet rigorous reliability and performance standards to protect personnel and equipment during emergencies. The contract is classified as a subcontract under NAICS code 334516, issued by the Mississippi Department of Transportation, with a response deadline of August 12, 2026. The posting date is July 23, 2026, and the place of performance and specific location details are not provided, indicating the work may be conducted at various sites under the department’s jurisdiction. All proposals must demonstrate technical feasibility, compliance with safety regulations, and a clear implementation plan for integration, with evaluation likely focused on system durability, redundancy, and proven real-world performance in similar applications.

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE

Hydraulic Aerial Lift Boom AssemblyThe contract involves the design, fabrication, and integration of a hydraulic aerial lift boom assembly capable of reaching a maximum working height of 62 feet and a horizontal reach of 54 feet, with integrated self-locking worm gearbox technology to enable full 360-degree rotation and enhanced stability during operation. The system must be engineered to deliver precise control, reliability, and durability under demanding field conditions, with all components meeting stringent performance and safety standards. The work will be performed under a subcontract arrangement and is tied to the Mississippi Department of Transportation, though specific performance location details are not provided. The solicitation was posted on July 23, 2026, with a mandatory response deadline of August 12, 2026, and is classified under NAICS code 333999 for other miscellaneous manufacturing. The contract does not specify any set-aside type or reserved status for small or minority-owned businesses, and no point of contact or office address information is included in the posting. Interested parties must submit proposals through the official Mississippi Department of Finance and Administration bid search portal before the deadline to be considered for award.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

DEADLINE

Pre-Bid Conference; Date & Time: 7/28/2026 2:00:00 PM ------------------------------------------------------------------------------------------------------------------------------------ Synopsis Description: Notice is hereby given that sealed bids wilA pre-bid conference is scheduled for July 28, 2026, at 2:00 PM for a sealed bid solicitation issued by the Mississippi Department of Finance and Administration under the agency name MPTAP. The solicitation, identified by number 61-20260713111608 BSJC, was posted on July 23, 2026, and bids must be submitted by the deadline of August 11, 2026, at 6:00 PM. The contract opportunity is categorized under state, local, and education (SLED) government procurement and is intended for performance within the state of Mississippi. Interested parties are encouraged to attend the pre-bid conference to gain clarity on requirements before submitting their proposals. All details and submission instructions are available via the official online portal linked in the solicitation.

Convention and Trade Show Organizers

POSTED

DEADLINE

Jones County Junior College is seeking unpriced technical proposals for: Tractor Truck and Trailer The deadline for receipt of unpriced technical proposals is August 6, 2026, at 2:00 PM, Central Time. Specifications and detailed instructions regardingJones County Junior College is soliciting unpriced technical proposals for a tractor truck and trailer, with proposals due by August 6, 2026, at 2:00 PM Central Time. The solicitation, identified by number 327-20260714155632 JCJC, was posted on July 23, 2026, and is managed under the Mississippi Department of Finance and Administration’s MPTAP program. Proposals must conform to specified technical requirements outlined in the full solicitation document, and all submissions should be directed according to the provided instructions. The contract opportunity is targeted for performance within Mississippi, though no specific city or zip code is listed for the place of performance. The solicitation does not designate a set-aside classification and is open to all qualified responders. The official posting and detailed information can be accessed through the Mississippi government contract portal using the provided URL.

Heavy Duty Truck Manufacturing

POSTED

DEADLINE

NOTICE is hereby given that the City Clerk of the City of Collins, MISSISSIPPI, will receive sealed bids until 10:00 am on August 20, 2026 in the City Clerks Office at City Hall, 300 Main St., Collins, MS 39428, and then at said location openedThe City of Collins, Mississippi, is soliciting sealed bids for an upcoming public contract, with all proposals required to be submitted to the City Clerk’s Office at City Hall, 300 Main St., Collins, MS 39428, no later than 10:00 a.m. on August 20, 2026. Bids will be publicly opened at that same location immediately after the deadline. The solicitation, identified by number 65-20260714090610 Collins, was posted on July 23, 2026, and is managed under the Mississippi Public Works Procurement program through the agency MPTAP. While no specific project description or North American Industry Classification System code is provided, the solicitation is open to eligible bidders interested in contracting with the city. All bids must be submitted in sealed envelopes and comply with any formal requirements set forth by the City Clerk’s Office, with no indication of set-aside provisions or special eligibility criteria. Responses must be delivered to the specified address by the stated deadline to be considered valid.

POSTED

DEADLINE