Skid Steer

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. Solicitation number 12661218B0020 is issued as a request for quotation (RFQ). The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-73. The associated NAICS code is 423840. This acquisition is for the following item as identified in the Contract Line Item Number (CLIN): One New Skid Steer: - 1. Quantity 1 - Bobcat model S595 or equivalent - 2. Engine- - a. Emissions Tier (EPA) - Tier 4 - b. Engine Fuel - Diesel - c. Horsepower - 74 hp - d. Turbocharged Engine - 3. Performance - a. Rated Operating Capacity (SAE) - 2,200 lb - b. Tipping load - 4400 lb - c. Operating Weight - 6793 lb - d. Travel Speed - 7.4 mph - e. Travel Speed (2-speed option) - 11 mph - 4. Capacities - a. Fuel Tank - 24.7 gal - 5. Hydraulic System - a. Hydraulic System Pressure- 3,500 psi. - b. Auxiliary Standard flow - 17.1 gal/min - c. Auxiliary high flow - 26.7 gal/min - d. Pressure release hydraulic quick couplers - 6. Dimensions - a. Length - 133 inches - b. Length without attachments - 104.6 inches - c. Length with standard bucket - 133 inches - d. Width - 64.7 inches - e. Width with bucket - 68 inches - f. Height - 77.8 inches - g. Reach at maximum height - 32.6 inches - h. Turning radius - 79.7 inches - i. Wheelbase - 42.6 inches - 7. The following optional features shall be included in addition to standard features: - a. Joystick control - b. Air Conditioning - c. Cab enclosure - d. Sound option - e. Cab heater - f. Radio - g. Two speed travel - h. hydraulic bucket positioning - i. high flow option - j. Power Bob-Tach - k. ACS (Switchable Controls) - l. Ride control - 8. 1 year warranty - 1. Alternate 1 - angle broom, specifications include: - a. Quantity 1 - 84-inch angle broom - b. Width - 96.4 inches - c. Broom angling- hydraulic cylinder - d. Bristles- Replaceable, wafer polypropylene - 2. Alternate 2 - snow blower, specifications include: - a. Quantity 1 - snow blower, SB240, 72 inch - b. Width - 74.5 inches - c. Height - 65.5 inches - d. Intake height - 34.5 inches - e. Fan diameter - 24 inches - f. Auger diameter - 18 inches - 3. Alternate 3 - snow pusher, specifications include: - a. Quantity 1 - snow pusher - 8 foot - b. Width - 102 inches - c. Height - 37.2 inches - d. Skid shoes- .75 by 5 inch AR400 Schedule: Unit shall be shipped within 60 days. Each line item must be addressed and priced separately in the quote FOB destination: 1616 Albrecht Blvd N, Fargo, ND 58102-2765 FQ Brand Name or Equal and Buy Best Value statements: 52.211-6 -- Brand Name or Equal (1999) (a) If an item in this solicitation is identified as "brand name or equal," the purchase description reflects the characteristics and level of quality that will satisfy the Government's needs. The salient physical, functional, or performance characteristics that "equal" products must meet are specified in the solicitation. (b) To be considered for award, offers of "equal" products, including "equal" products of the brand name manufacturer, must- (1) Meet the salient physical, functional, or performance characteristic specified in this solicitation; (2) Clearly identify the item by- (i) Brand name, if any; and (ii) Make or model number; (3) Include descriptive literature such as illustrations, drawings, or a clear reference to previously furnished descriptive data or information available to the Contracting Officer; and (4) Clearly describe any modification the offeror plans to make in a product to make it conform to the solicitation requirements. Mark any descriptive material to clearly show the modification. (c) The Contracting Officer will evaluate "equal" products on the basis of information furnished by the offeror or identified in the offer and reasonably available to the Contracting Officer. The Contracting Officer is not responsible for locating or obtaining any information not identified in the offer. (d) Unless the offeror clearly indicates in its offer that the product being offered is an "equal" product, the offeror shall provide the brand name product referenced in the solicitation. (End of provision) EVALUATION FACTORS This is a Buy Best Value acquisition. The Government will award a Purchase Order resulting from this Request for Quotes to the responsible offeror whose quote is conforming to the solicitation and represents the most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers: EVALUATION FACTORS FOR AWARD 1. Past Performance - Quotes will be evaluated based on the offeor's past performance as provided by the offerors references. Minimum of three references 2. Offeror's Technical Solution- The Government will evaluate the performance of the offeror's product for capability and performance. 3. Quality and Reliability- Quotes will be evaluated on the offeror's product for its level of Quality and Reliability. 4. Price- The quoted price is fair and reasonable. NOTE: All evaluation factors other than cost or price, when combined, are significantly more important than cost or price. Factors and sub-factors are prioritized in the following order of importance (i.e. most important first, least important last) for award evaluation 2, 3, 1, 4. The Government will evaluate quotes for award purposes, considering the evaluation factors above, and will award to that offeror whose proposal represents the best value to the Government. - 52.232-18 Availability of Funds. Availability of Funds (Apr 1984) Funds are not presently available for this contract. The Government's obligation under this contract is contingent upon the availability of appropriated funds from which payment for contract purposes can be made. No legal liability on the part of the Government for any payment may arise until funds are made available to the Contracting Officer for this contract and until the Contractor receives notice of such availability, to be confirmed in writing by the Contracting Officer. (End of Clause) Inspection and Acceptance Terms: Supplies will be inspected and accepted by the End User / Purchasing Agent at destination. Representations: Please include a completed copy of the provision at 52.212-3, Offeror Representations and Certifications -- Commercial Items. Applicable Provisions: The following Federal Acquisition Regulation (FAR) and the Department of Agriculture Acquisition Regulation (AGAR) provisions and clauses apply to this acquisition: FAR 52.204-7 System for Award Management: AGAR 452.204-70 Inquiries; FAR 52.209-6 Protecting the Government's Interests when Subcontracting with Contractors Debarred, Suspended or Proposed for Debarment; FAR 52.212-1 Instructions to Offers-Commercial Items; FAR 52.212-2 Evaluation-Commercial Items (filled in as follows: Technical specifications/support, and price); FAR 52.212-4 Contract Terms and Conditions-Commercial Items; FAR 52.212-5 Contract Terms and Conditions Required to Implement Statutes of Executive Orders-Commercial Items; AGAR 452.219-70 Size Standard and NAICS Code Information; FAR 52.222-3 Convict Labor; FAR 52.222-19 Child Labor - Cooperation with Authorities and Remedies; FAR 52.222-21 Prohibition of Segregated Facilities; FAR 52.222-26, Equal Opportunity Employment; FAR 52.222-36 Affirmative Action for Workers with Disabilities; FAR 52.222-50 Combating Trafficking in Persons; FAR 52.223-18 Encouraging Contractor Policy to Ban Text Messaging While Driving; FAR 52.225-13 Restrictions on Certain Foreign Purchases; FAR 52.225-25 Prohibitions on Contracting with Entities Engaging in Certain Activities or Transactions Relating to Iran-Reps and Certs; FAR 52.232-33 Payment by Electronic Funds Transfer-Central Contractor Registration; FAR 52.233-3 Protest After Award; FAR 52.233-4 Applicable Law for Breach of Contract; FAR 52.252-1 Solicitations Provisions Incorporated by Reference; FAR 52.252-2 Clauses Incorporated by Reference. Invoices must be submitted into the Invoice Processing Platform (IPP). IPP is a government-wide secure web-based payment information service offered free of charge to government agencies and their suppliers by the U.S. Department of Treasury's Financial Management Service (FMS). One-time enrollment in IPP means that you will receive a series of e-mails from Treasury services. The first email will have the IPP Logon ID and link to the IPP application. A second e-mail, containing the password will be sent within 24 hours. Once you receive these emails, please login to the IPP application and complete the registration process. Benefits of registering with IPP include the ability for your company to create invoices directly from a contract award and submit them electronically, as well as: - e-mail notification when invoice(s) are paid - online payment history - remittance download The e-mail notification of payment is sent when a payment is distributed to your bank account and will include all pertinent payment information. The IPP Customer Support Desk is available to assist users Monday through Friday (excluding bank holidays) from 8:00AM - 6:00PM ET, including answering any questions related to accessing IPP or completing the registration process. Their toll-free number is +1 (555) 000-0000 2 or they can be reached at: contact@example.gov. If you have any questions or concerns, please contact the Controller Operations Division Help Desk at: +1 (555) 000-0000 or contact@example.gov. The successful vendor must be enrolled in IPP to submit invoices and receive payment. If the successful vendor firm is already enrolled in IPP invoices are to be submitted under the vendors existing IPP enrollment. Clause 52.223-2 requires: The contractor shall report to the environmental point of contact, with a copy to the Contracting Officer, on the product types and dollar value of any USDA-designated biobased products purchased by the contractor during the previous fiscal year. The report must be submitted not later than October 31 of each year during contract performance and at the end of contract performance. See list of attachments for categories of Biobased products, this list and linked descriptions can be found at http://cfr.regstoday.com/7CFR3201.aspx The environmental point of contact is: Ron Buckhalt contact@example.gov Phone: +1 (555) 000-0000 Energy Efficient Products Energy policy acts of 1992, 2005, 2007 and Executive Order 13423 require the purchase of energy efficient products--either those labeled "ENERGY STAR" or designated by the U.S. Department of Energy's Federal Energy Management Program (FEMP). The requirement applies both to direct purchases and contracted services, including contracts for design, construction, renovation, or maintenance of a public building. For contracted services, the contractor must provide ENERGY STAR, FEMP qualified, or other energy efficient products. To be eligible for an award, all contractors must be registered in the System for Award Management (SAM). A contractor can contact SAM by calling +1 (555) 000-0000 or e-mail at www.sam.gov. NO EXCEPTIONS. A DUNS (Dun and Bradstreet) number is required in order to register. ALL BIDS ARE TO BE EMAILED TO contact@example.gov Quotes must be valid until 12/31/2018