Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

SKIN, AIRCRAFT

Awarded
SPE4A7-25-T-609FFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Defense Logistics Agency awarded contract SPE4A726P3902 to Enigma Aerospace & Consulting L.L.C. (CAGE 9GH01) for a total price of $296,755.35, with an award date of July 17, 2026, under solicitation SPE4A7-25-T-609F. The contract covers two primary deliverables: an aircraft skin identified by NSN 1560016559986 and a Government First Article Test designated by NSN 0001S00000052. Performance is to be carried out at the contractor’s facility in Panama City, Florida, and the contract is inferred to be a firm-fixed-price type based on standard DLA procurement patterns and the nature of the deliverables. The award follows a modification numbered P00001, effective the same date as the award, which integrates the FAR clause 52.222-90 addressing DEI discrimination by federal contractors, enacted via DoD Class Deviation 2026-00040, Revision 1. This clause prohibits racially discriminatory practices in employment and contracting, mandates flow-down to subcontracts, requires reporting of violations by subcontractors, and establishes enforcement mechanisms including termination for default. The contractor is responsible for compliance, documentation, and notification of non-compliance or legal challenges to the clause. No technical specifications, packaging standards, inspection criteria, or detailed delivery schedules are provided in the available documentation, nor are unit quantities, prices, or FOB terms disclosed for the line items. Payment oversight is managed by DLA Aviation in Richmond, Virginia, with contract administration handled by DCMA Ohio River Valley, though the official remittance address and invoicing method are not explicitly stated. The contractor’s size status and socioeconomic certifications are not affirmed, and no COR or COTR is named in the records. The contract lacks explicit references to any MIL-STD packaging or marking requirements, and no additional attachments, evaluation factors, or appropriation data are included in the provided materials.

General Info

ENIGMA AEROSPACE awarded $296,755.35 for aircraft skin parts and first article testing under DLA contract.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

Contract Value

$296,755.35

NAICS

336413 - Other Aircraft Parts and Auxiliary Equipment ManufacturingView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Awardee

ENIGMA AEROSPACE & CONSULTING L.L.C.View Profile

Award Issued Date

Documents

(1)

SPE4A726P3902_P00001.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseAwarded
Posted

Combined Synopsis

Awarded

Contract was awarded

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Defense Logistics Agency
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → Defense Logistics Agency
View Agency Profile
Office AddressUS

Full Description

Show more
DLA award SPE4A726P3902 posted on DIBBS. Awardee: ENIGMA AEROSPACE & CONSULTING L.L.C (CAGE 9GH01) Total Contract Price: $296,755.35 Award Date: 07-17-2026 Solicitation: SPE4A7-25-T-609F Line items: - SKIN, AIRCRAFT (NSN/Part 1560016559986, PR 7012898984) - GOVERNMENT FIRST ARTICLE TEST (NSN/Part 0001S00000052)

Similar Contracts

Same NAICS industry code

NAICS: 336413
New
DIBBS
Supply of Ground Servicing Roller Units (NSN 1730-01-256-2371)The contract calls for the manufacture and delivery of two ground servicing roller units identified by NSN 1730-01-256-2371, with all items required to meet stringent military packaging, labeling, and regulatory standards to ensure compatibility with defense logistics systems. The work is governed under a small business set-aside classification, exclusively available to small business concerns as defined by the SBA under FAR 19.5, and falls under the NAICS code 336413, indicating the nature of the industry as aircraft and other aerospace product manufacturing. Delivery must be performed to the specified location in New Cumberland, Pennsylvania, with a zip code of 17070-5002, and all units must be fully compliant with DoD technical and procedural requirements. The solicitation was posted on August 2, 2026, and responses must be submitted no later than August 13, 2026, with the contracting activity managed by the Department of Defense under the agency name Construction & Equipment Manu & Con. The contract is structured as a subcontract, indicating it may involve supply chain coordination through primary contractors fulfilling broader government obligations. While no point of contact details are listed, bidders must adhere to the submission guidelines via the DIBBS portal linked in the notice, ensuring all documentation and certifications align with federal procurement regulations for defense supply contracts.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336413
New
DIBBS
PLUG, INLET, HIRSS
Solicitation # SPE8EF-26-T-1538
The contract pertains to the procurement of one unit of a PLUG, INLET, HIRSS with NSN 1730-01-246-6758 and part number 70700-20514-042, supplied by SIKORSKY AIRCRAFT CORPORATION and AIRBORNE INDUSTRIES INC. Delivery is required within 20 days from the contract award, FOB origin, with no variance allowed in quantity. The item is designated as a critical application item and must comply with Item Unique Identification (IUID) standards per MIL-STD-130 and the DFARS 252.211-7003 clause. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersedes other standards such as ASTM D3951. Packaging and labeling must adhere to MIL-STD-129 and DLA packaging regulations, with palletization following RP001 guidelines. Sampling for acceptance follows the SIKORSKY CORP QAP 1201 alternative plan, which must meet or exceed ASQ H1331 or MIL-STD-1916 standards. The item must be shipped via the fastest traceable method, excluding parcel post, with delivery directed to a designated U.S. Army facility in Boise, Idaho. The shipment is identified by RDD 777 and is tied to project TP 3 under contract SPE8EF-26-T-1538. The original required delivery date is August 3, 2026, and the contract includes provisions for configuration change management, variance requests, removal of government identification from non-accepted supplies, and compliance with measuring and test equipment standards. All documentation and compliance actions are subject to the DLA Master List revision effective on the solicitation date.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336413
New
DIBBS
HARNESS, ENGINE, LH, A
Solicitation # SPE4A5-26-T-318P
The contract pertains to the procurement of three engine left-hand harnesses, part number 209-375-105-101, under solicitation SPE4A5-26-T-318P, with a delivery requirement of 398 days and an original ship date of September 13, 2027. The item is source-controlled, meaning it must be manufactured and tested strictly in accordance with limited rights data held by approved sources, primarily First Electronics Corp. with CAGE code 14532, and no other vendor may quote without prior source approval and submission of a Source Approval Request package. Inspection and acceptance occur at origin, following MIL-STD-1916 or equivalent zero-based sampling plans with stringent acceptance criteria: critical attributes require a zero-defect standard, major attributes are sampled at AQL 1.0, and unspecified attributes are treated as major. The item is classified as a critical application and is subject to DLA’s Master List of Technical and Quality Requirements, which supersede other standards including ASTM D3951. Packaging must conform to MIL-STD-129 and RP001 DLA packaging guidelines, with no variation permitted in quantity. The contract includes cybersecurity compliance requirements under CMMC Level 2 self-assessment and mandates physical identification marking per RQ017. Delivery is FOB origin to the DLA Distribution facility in New Cumberland, PA, with all documentation, traceability, and testing records retained by the supplier. The unit of issue is each (EA), priced at $3.00 per unit for a total value of $9.00.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
STRIP WING
Solicitation # SPE4A6-26-Q-1212
The contract pertains to the procurement of one unit of a Strip Wing identified by NSN 1560-01-608-2561, with a delivery requirement of 111 days after contract award. Technical and quality requirements referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless an amendment specifies a later revision. The item is subject to Covered Defense Information requirements and must comply with DLA packaging standards. Tailored higher-level quality requirements apply to both manufacturers and non-manufacturers, and inspection and acceptance must occur at the point of origin. Government identification must be removed from non-accepted supplies, and physical identification or bare item marking is required. Item Unique Identification is not mandated per the service customer’s request, with DFARS 252.211-7003(c)(1)(i) governing this exception. Technical data associated with the item is subject to export control under either ITAR or EAR, restricting disclosure to foreign persons anywhere in the world, and DFARS 252.225-7048 is fully applicable. Access to this controlled data is restricted to contractors holding valid US/Canada Joint Certification Program certification, who have completed mandatory DLA training and questionnaire, and have received explicit approval from the DLA controlling authority. The solicitation number is SPE4A6-26-Q-1212, issued on August 2, 2026, with responses due by August 10, 2026, and the contracting office is the ASC Commodities Division under the Department of Defense, with Bryan Distin listed as the primary point of contact.
ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
GOVERNMENT FIRST ARTIC
Solicitation # SPE4A7-26-T-605H
This contract pertains to the procurement of six structural fitting components identified by NSN 0001S00000052 under solicitation SPE4A7-26-T-605H, with a delivery deadline of 588 days after contract award. The requirement is set aside exclusively for small businesses as defined under FAR 19.5, with the NAICS code 336413 indicating the classification under Aerospace Product and Parts Manufacturing. Technical and quality standards referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with specific identifiers R and I directing compliance to documented criteria. The deliverables must adhere to DLA packaging standards and include mandatory documentation for source approval requests. The item is subject to stringent export controls under ITAR or EAR, restricting technical data sharing without explicit authorization, and access is limited to contractors with approved JCP certification, completed DOD export training, and DLA authorization. Compliance with configuration change management is required through engineered change proposals for any deviations or waivers. Inspection and acceptance must occur at the origin, and non-accepted supplies must have all government identification removed. The item includes components governed by Qualified Products Lists or Qualified Manufacturers Lists, necessitating qualification per procurement note H02. Physical marking of the bare item is mandated, though Unique Item Identification is waived per customer request under DFARS 252.211-7003(c)(1)(i). Cybersecurity compliance requires CMMC Level 2 certification by an approved third-party assessment organization. Data related to this procurement is classified as Covered Defense Information under RD002, and the point of contact for inquiries is April Reed at the Department of Defense, with performance located in New Cumberland, Pennsylvania. The solicitation was posted on August 2, 2026, with responses due by August 10, 2026.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
ARMOR, SUPPLEMENTAL,
Solicitation # SPE4A7-26-T-606G
The contract is for one unit of supplemental armor for small arms fragmentation, sourced from Foster-Miller, Inc. with CAGE code 30233 and NSN 1560-01-434-6349, under solicitation number SPE4A7-26-T-606G. Delivery is required within 20 days FOB origin to North Kingston, Rhode Island, with no tolerance for quantity variance. The item is designated as a critical application and must comply with stringent technical and quality standards referenced from the DLA Master List, including ISO 9001:2015 for quality management and MIL-STD-1916 or comparable zero-based sampling plans for inspection, with zero non-conformances required unless otherwise specified. The supplier must adhere to rigorous packaging directives including MIL-STD-2073-1E and MIL-STD-129 for marking, while also following Qinetiq Packaging Instruction 1210300059 and DLA packaging requirements. Item Unique Identification is not required per customer request, and government identification must be removed from non-accepted supplies. Cybersecurity Maturity Model Certification Level 2 self-assessment is mandatory, and hazardous materials shipping procedures must be followed per IP025. Shipping must occur via the fastest traceable means—parcel post is explicitly prohibited. The contract includes detailed inspection and acceptance at destination and specifies the responsible government point of contact as April Reed of the Department of Defense, with an original required delivery date of June 2, 2026.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
INSULATION, SUPPORT
Solicitation # SPE4A7-26-T-606D
The contract specifies the procurement of a commercial off-the-shelf (COTS) insulation and support item identified by part number 02250158-385 and NSN 1680-01-649-5646, with a quantity of one unit to be delivered within five days under the solicitation SPE4A7-26-T-606D. Delivery is FOB origin, with inspection and acceptance occurring at the destination, and the item must be packaged in accordance with ASTM D3951 while strictly adhering to all applicable DLA Master List of Technical and Quality Requirements, including MIL-STD-129 for marking and labeling, and RP001 for packaging standards. Sampling requirements mandate compliance with MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance criteria unless otherwise specified, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively, or AQLs of 0.1, 1.0, and 4.0. The item must be palletized per DLA requirements, labeled with the assigned unit of issue, and shipped via the fastest traceable means, explicitly prohibiting parcel post. The delivery address is Marine Aviation Logistics Squadron 14 at MCAS Cherry Point, North Carolina, with the original required delivery date set for March 4, 2026. All technical and quality provisions referenced in the DLA Master List take precedence over other standards, and the contract includes detailed shipping, identification, and government-only fields for logistics and tracking purposes.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

NAICS: 541690
New
DIBBS
Hazardous Materials Compliance & Labeling ServicesThe contract pertains to regulatory consulting services focused on hazard communication compliance, specifically requiring the preparation of warning labels and safety data sheets (SDS) that meet both OSHA and military standards. This work is critical to ensuring proper handling, storage, and disposal of hazardous materials across defense operations, with all deliverables needing to align with federal safety regulations and Department of Defense requirements. The services will support the Defense Logistics Agency in maintaining stringent compliance for hazardous materials used in military supply chains and facilities. The contract is classified as a subcontract under NAICS code 541690, which covers other scientific and technical consulting services, and is issued by the Department of Defense through the Defense Logistics Agency. Performance is required at a designated location in Albany, Georgia, with a zip code of 31704-0325. The solicitation was posted on August 2, 2026, and responses must be submitted by August 13, 2026. There is no set-aside designation specified, indicating the opportunity is open to all qualified subcontractors regardless of size or status. All work must be completed in accordance with applicable federal regulations, and contractors are expected to demonstrate expertise in hazard communication standards and military-specific documentation protocols.
Other Scientific and Technical Consulting Services

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details