This Solicitation opportunity from Department Of Defense was posted on July 14, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.
SKIN, AIRCRAFT
Contract Overview
Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.
Active Opportunities Like This One
AI Contract Overview
The contract solicitation SPE4A7-26-T-572R seeks three aircraft skin components designated by NSN 1560-01-570-5438, with delivery required 115 days after order placement to the DLA Distribution Facility in New Cumberland, Pennsylvania. The items must be manufactured to precise technical specifications including adherence to ASME Y14.5 for dimensioning and tolerances, and the use of SAE AMS-QQ-A-250 and SAE AMS-QQ-A-250/5 in place of QQ-A-250/5. The skin must be furnished without rivet, pilot, fastener holes, or cutouts, with a 0.50 inch excess trim allowance added to all exterior edges. Surface treatment requires chemical conversion coating per MIL-DTL-5541, Class 3, on the exterior and a single coat of MIL-PRF-23377, Type I, Class C2, on the interior in accordance with the finish manufacturer’s instructions. All parts must be permanently marked with the NSN, part number, current design authority code 98748, actual manufacturer’s CAGE code, date of manufacture, and “FOR MILITARY USE ONLY,” excluding Boeing’s CAGE code. A Boeing Rights Guard License Agreement 01 restricts access to technical data, mandating strict data non-disclosure and destruction protocols. Packaging and marking must conform to MIL-STD-129 with data matrix barcodes and DLA Packaging Requirements RP001 for palletization, while hazardous materials follow FED-STD-313 and TQ IP025. Inspection and acceptance occur at origin, with sampling governed by MIL-STD-1916 or ASQ H1331 Table 1 using zero non-conformances for acceptance unless otherwise specified; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Quality systems must comply with ISO 9001:2015 or equivalent. Transportation must be via U.S.-flagged vessels under DFARS 252.247-7023, and FOB Origin terms apply, placing responsibility for conformity, packaging, and inspection on the contractor until government acceptance. All requirements are sourced
General Info
Agency
NAICS
Place of Performance
2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USASet-Aside
Timeline
Submission Closed
Organization & Contact Information
Full Description
SKIN,AIRCRAFT
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RD002, COVERED DEFENSE INFORMATION APPLIES
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
A BOEING RIGHTS GUARD LICENSE AGREEMENT 01 RESTRICTED TECHNICAL DATA
PACKAGE EXISTS FOR THIS ITEM. DATA NON-DISCLOSURE AND DATA DESTRUCTION
CONDITIONS APPLY.
VENDORS MUST COMPLETE AND RETURN THE FORMS LOCATED IN
THE "01 BOEING RIGHTS GUARD" LICENSE AGREEMENT FOLDER AVAILABLE AT
https://tdmt.dla.mil/TDMT/Client EXCEPTIONS: PART MARKING PER MIL-STD-130, METHOD PER THE DRAWING REQUIREMENTS AND BAC 5307. MARKING MUST INCLUDE NATIONAL STOCK NUMBER, PART NUMBER, CURRENT DESIGN AUTHORITY CODE (98748), ACTUAL MANUFACTURER'S CAGE CODE (-----), DATE OF MANUFACTURE, AND "FOR
SPE4A7-26-T-572R
SECTION B
MILITARY USE ONLY". PARTS WILL NOT BE MARKED WITH THE ORIGINAL DESIGN
AUTHORITY (BOEING) CAGE CODE.
2. DELETE REFERENCE TO D2-5000, BAC 5000
3. DIMENSIONING AND TOLERANCE PER ASME Y14.5 I/L/O USAS Y14.5.
4. USE SAE AMS-QQ-A-250 AND SAE AMS-QQ-A-250/5 IN LIEU OF QQ-A-250/5
5. PART TO BE FURNISHED WITHOUT RIVET, PILOT, FASTENER HOLES AND
CUTOUTS.
6. ADD 0.50 INCH EXCESS TRIM ALLOWANCE TO ALL EXTERIOR EDGES OF THE
SKIN.
7. F-2.130 FINISH CODE DEFINED: CHEMICAL TREAT SKINS TO MEET THE
REQUIRMENTS OF MIL-DTL-5541, CLASS 3. TO INTERIOR SURFACE OF SKINS,
APPLY ONE COAT OF MIL-PRF-23377, TYPE I, CLASS C2,
ACCORDING TO FINISH MANUFACTURER'S APPLICATION NSN/Part Number: 1560-01-570-5438 Quantity: 3 EA Purchase Request: 7016845407QTY: 3 Delivery: 115 days ADO
More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV
Same awarding agency
Find Active Opportunities Like This
Get AI-powered intelligence on the opportunities still open
Every page of the solicitation package shredded into a compliance breakdown
AI-powered matching based on your capabilities and past performance
Competitor and incumbent history on the requirement
Automated alerts on amendments, Q&A deadlines, and award
Join 650+ contractors already using CLEATUS