Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

This Sources Sought opportunity from Department Of Energy was posted on February 7, 2023. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

SLAC B026 Roof Replacement Construction Project

Closed
SLAC_B026_Roof_Replacement_Sources_Sought_07FEB2023Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 238160
New
Inland Empire Job Corps-Request for Quote Roof Design & Build
Solicitation # inland-empire-job-corps-request-quote-roof-design-build
Management & Training Corporation is seeking quotes for a fixed-price design-build subcontract to construct an over-build enclosure for the lower roof of Building G at the Inland Empire Job Corps Center in San Bernardino, California. The project involves designing and installing a roof covering approximately 800 gross square feet, featuring a 3% sloped roof with a single ply, EPDM 60 mil roofing system over wood or metal decking. The scope includes structural framing that extends existing bearing walls or utilizes a new post-beam system, the installation of three LED strip light fixtures with one emergency backup, and strict adherence to OSHA safety standards and the Architectural Barriers Act Accessibility Standard of 2007. The total period of performance is 240 days, with a requirement to complete the work within 100 consecutive business days following the Notice to Proceed. Bids are due by November 2, 2026, and will be evaluated based on overall best value. This is a small business set-aside opportunity open to various SBA certifications. For bids equal to or greater than $25,000, a bid bond of 20% of the base bid is required, and the awarded contractor must provide performance and payment bonds from a surety with at least an A- rating. Bidders must conduct a physical site visit and sign an attendance roster to be eligible. The project is subject to Construction Wage Rate Requirements, necessitating compliance with California prevailing wages and the submission of weekly certified payroll reports. Additionally, all inspections and testing must be conducted by an independent, third-party agency registered in California. Required insurance minimums include 1 million dollars per occurrence for general liability, 1 million dollars for auto, and 500,000 dollars for workers compensation.
Inland Empire Job Corps

POSTED

about 4 hours ago

DEADLINE

in 5 days
NAICS: 238160
New
SLED
INDEX ROOF FLUID APPLIED ROOF
Solicitation # 27-350SOS-PHYSE-B-54721
The Illinois Secretary of State is soliciting bids for the installation of a new fluid-applied roof system on the Index Building located at 111 E. Monroe St, Springfield, IL. The project requires the application of a white, cold-applied, single-component silicone elastomer membrane designed for permanent weather and sunlight exposure. Key deliverables include the construction of a 100 square foot mock-up, the performance of a 72-hour flood test to ensure water resistance, and the provision of a 20-year manufacturer full labor and material warranty. The award will be granted to the responsive and responsible bidder who submits the lowest price. Bidders must submit all proposals electronically via BidBuy by November 19, 2026, and must provide a 10% bid bond. The contract requires adherence to strict material storage and delivery standards, including the use of original manufacturer containers and storage in weather-protected environments. Compliance with the State Prompt Payment Act, prevailing wage laws, and the Illinois Department of Human Rights Act is mandatory. Additionally, the total contract term, including all renewals and extensions, cannot exceed ten years. Vendors must provide a Certificate of Insurance naming the State as an additionally insured party and are responsible for all safety barricades and traffic signage during the project.
PHYSERV350 - Physical Services

POSTED

about 14 hours ago

DEADLINE

in 21 days

General Info

NAICS

238160 - Roofing Contractors

Place of Performance

Menlo Park, CA, 94025, USA

Set-Aside

NONE

Documents

27

Notice to Proceed Submittals Checklist

PDF, High priority: read this first1 page · checklist
High

SLAC-I-730-0A21T-011-R003 Work Planning and Control Summary for Subcontractors

PDF, High priority: read this first2 pages · sow
High

Subcontractor Safety Qualification Form

PDF, High priority: read this first5 pages · form
High

B2 08.10 Section J Final Inspection Report

DOCX, Low priority1 page · other
Low

B2_08.9 Sec J Final Release

DOCX, Low priority1 page · other
Low

DCS 1934 - Kobe Steel Quality-Related Suspect Issue

PDF, Low priority1 page · special-notice
Low

SF 1413 Statement and Acknowledgment of Subcontract Award

PDF, Low priority1 page · other
Low

B2_00_RFP_DRAFT_Cover_Letter_B026_Roof_Replacement_Project.docx

DOCX

B2_01_Attachment_A_RFP_335286_RFI_Log.docx

DOCX

B2_02_RFP_DRAFT_Section_A_%28Subcontract_Form%29.docx

DOCX

B2_03_RFP_Section_B_%28Supplies+or+Services+and+Price_Costs%29.docx

DOCX

B2_04.0_RFP_Section_C_Cover_%28Specs_SOW%29.docx

DOCX

B2_04.1_SOW_B026_Phase_2_Roof_Replacement_with_Option_for_B048_Roof_Replacement.pdf

PDF

B2_04.2_Specifications_B026_Phase_2_Roof_Replacement.pdf

PDF

B2_04.3_Specifications_B048_Roof_Replacement.pdf

PDF

B2_05_RFP_Section_F_%28Deliveries+Performance%29.docx

DOCX

B2_06.0_RFP_Section_G_%28General_TsCs%29.docx

DOCX

B2_07_RFP_Section_H_%28Special_Terms_Conditions%29.docx

DOCX

B2_08.0_RFP_Section_J_%28List+of+Attachments%29.docx

DOCX

B2_08.1_Sec_J_DBA_WD_CA20230018_012023_Mod_2.pdf

PDF

B2_08.3_Sec_J_Subcontractor_Form_IIPP_052121.pdf

PDF

B2_08.5_Sec_J_Work_Classification_335286.pdf

PDF

B2_10.0_RFP_Section_K_%28Rep+and+Certs+Cover%29.docx

DOCX

B2_10.1_Section_K_Reps_and_Certs_Supplement_08.25.22.pdf

PDF

B2_11.0_Section_L_Instructions_to_Offerors_RFP_335286.docx

DOCX

B2_11.1_Section_L_B026_Roof_Replacement_Bid_Breakdown_Form.xlsx

XLSX

B2_12.0_Section_M_Evaluation_Criteria_RFP_335286.docx

DOCX

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseClosed
Posted

Sources Sought

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Energy → Slac National Accel Labor -Doe Contractor
Contacts1 person available
OfficeMenlo Park, CA, 94025, USA
Office AddressMenlo Park, CA, 94025, USA
Contacts
Jennifer Jamison

Full Description

Show more
THIS POSTING IS FOR "SOURCES SOUGHT ONLY." PLEASE DO NOT SUBMIT BIDS. While the DRAFT RFP package has been included with this post for your reference, the RFP has NOT yet been released and is NOT an ACTIVE RFP at this time. All dates are TBD at this time as it is only a DRAFT RFP at this time. All dates and info. are subject to change and will be updated when the formal RFP has been released. Interested Vendors should express their interest on the Interested Vendors List through this beta.SAM.GOV posting. SLAC B026 Phase 2 Roof Replacement w/Option for B048 Roof Replacement Project (Construction) SLAC is seeking qualified and experienced General Contractors for the upcoming B026 Phase 2 Roof Replacement w/Option for B048 Roof Replacement Project (Construction) RFP. Potential bidders will need to meet all necessary criteria outlined in Step 1 Qualification Submittals contained in Section L of the DRAFT RFP. A partial list of the criteria outlined in Step 1 of Section L include the following: - A current and valid California Contractor's License - An established local presence in the San Francisco Bay Area, CA for a minimum of three years - Experience working at Department of Energy (DOE) and/or Department of Defence (DOD) Facilities - Documented experience managing Construction projects of a comparable size - Previous experience executing projects in the field of demolition, commercial roofing/re-roofing, and utilities executed in the past 5 years in and around the San Francisco Bay Area, CA. This project is to replace portions of the existing roof on B026 that were not completed in 2018. The sections being the High Bay, and the 2 side additions. There is an Option to also reroof B048 in its entirety. This project is to replace portions of the existing roof with a new roofing system. On B026, The High Bay is approximately 9600 sq ft. The side additions are 6000 sq ft. and 2000 sq ft. The High Bay roof is about 45 feet above ground and about 19 feet above the surrounding roof. The side addition roofs are about 26 feet above ground. B048 intent is to replace the existing roof, approximately 15,000 sq ft., with a new roofing system. The SLAC National Accelerator Laboratory (SLAC) is operated by Stanford University as a contractor for the United States Department of Energy (DOE) Office of Science (SC). SLAC supports a large national and international community of scientific users performing innovative research in support of the DOE mission. Success of that mission is directly coupled to the general-purpose infrastructure necessary to conduct this research. At SLAC, the accomplishment of that mission is currently at risk given sub-standard buildings that do not provide the appropriate environment to conduct world-class science or the supporting Management and Operations (M&O) functions.

More opportunities from Department Of Energy → Slac National Accel Labor -Doe Contractor

Same awarding agency

NAICS: 334111
New
Federal
Supermicro 1U rack-mount server assemblies
Solicitation # SLAC_368659_Supermicro_1U_Rack-mount_Server_Assemblies
SLAC National Accelerator Laboratory, operated by Stanford University for the Department of Energy, is soliciting quotes for twelve Supermicro 1U rack-mount server assemblies, model AS-1115HS-TNR. Each server must be configured with one AMD EPYC Turin 9255 CPU, 64GB of DDR5 ECC memory (2x 32GB), and a Supermicro DCMS license. Storage options include either no drive or one 240GB SATA drive, and network requirements specify either a 10GbE 4-port RJ45 or a combination of 2x SFP+ and 2x RJ45. This is a product-only procurement with no on-site services permitted. Quotes must be submitted by October 16, 2026, to Cheryl Stafford. The resulting purchase order will be a fixed-price contract with NET-30 payment terms. Source selection will be based on the Lowest Priced Technically Acceptable method and the best lead time. Domestic shipments are FOB Destination Prepaid and Add, while foreign shipments are CIP SLAC, Menlo Park, Duty Unpaid. Offerors must be registered in the System for Award Management and provide a completed Representations and Certifications Rider. Additionally, proposals must include the Harmonized Tariff Schedule code and Export Control Classification Number where applicable. Buy American Act certification is required for unit prices exceeding 15,000 dollars. While not direct Federal procurements, these subcontracts incorporate various FAR and DEAR clauses depending on the final contract value.
Electronic Computer Manufacturing

POSTED

3 days ago

DEADLINE

in 4 days
View Details
NAICS: 334517
New
Federal
X-ray imaging detector system
Solicitation # SLAC_369006_Xray_Imaging_Detector_System
SLAC National Accelerator Laboratory, operated by Stanford University for the Department of Energy, is soliciting quotes for an X-ray imaging detector system. The required equipment includes one XRD 4343CT-F22-C-000 imaging grade digital X-ray detector, an XRD-EPS 215W power supply, and associated AC, DC, extension, and PC connection cables, along with an XRD FG(E) OPTO PCIe Frame Grabber V4. Technical requirements specify a flat-panel detector configuration with an amorphous silicon sensor, a minimum active area of 40 cm x 40 cm, a 150 micron pixel size, and applicability for hard and high-energy X-ray diffraction greater than 20 keV. This is a product-only procurement with no on-site services permitted. Quotes are due by October 16, 2026, and will be evaluated based on the Lowest Priced Technically Acceptable method and the best lead time. The resulting purchase order will be a fixed-price contract with NET-30 payment terms. Domestic shipments are FOB Destination Prepaid and Add, while foreign shipments are CIP SLAC, Menlo Park, Duty Unpaid. Offerors must be registered in the System for Award Management and provide a completed Representations and Certifications Rider. Additionally, proposals should include HTS Codes, ECCNs, and a statement regarding duties and tariffs. Buy American Act certification is required for unit prices exceeding 15,000 dollars. While not direct Federal procurements, these subcontracts incorporate various FAR and DEAR clauses based on contract value thresholds, including specific regulations regarding equal opportunity, whistleblower rights, and export controls.
Irradiation Apparatus Manufacturing

POSTED

6 days ago

DEADLINE

in 1 day
View Details
NAICS: 333248
Federal
BL18 In-Vacuum Undulator
Solicitation # 367893(RE)
SLAC National Accelerator Laboratory, operated by Stanford University for the Department of Energy, is soliciting proposals for the design, fabrication, assembly, tuning, and delivery of an In-Vacuum Undulator (IVU) for SSRL BL18. The project requires a U.S. domestic end item source to develop a system including a vacuum sub-system with entrance and exit taper sections, motion control, and a support frame. Technical specifications are governed by SSRL Engineering Note M927, with a reference design based on the BL17 IVU. Key technical requirements include a longitudinal envelope of 3798.3 plus or minus 2.0 mm and specific magnetic period counts depending on the magnet design. The proposal submission deadline is October 30, 2026, at 5:00 PM PDT, with all documentation directed to Ryan Enos. The requested delivery date is 19 months after receipt of order to align with an August 2028 installation window. Award will be based on the combination most advantageous to SLAC, utilizing a price/technical tradeoff and qualitative assessment of factors including past performance, technical design, and financial stability. Required submission documents include firm fixed pricing, a Quality Assurance Plan, a Dun and Bradstreet report, and various representation and certification supplements. Compliance with E-Verify and the Buy American Act is mandatory.
All Other Industrial Machinery Manufacturing

POSTED

23 days ago

DEADLINE

in 1 day
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS