Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

SLEEVE, CLINCH, TUBE

Active
SPE7L5-26-T-4756Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract specifies the procurement of a sleeve, clinch, tube fitting intended for aircraft applications, identified by part number MS21922-5 and NSN 4730-00-289-8620, with a total quantity of 968 units. The item is classified as a commercial item and must be manufactured or assembled by an accredited entity listed on the Performance Review Institute’s Qualified Manufacturer List or Qualified Products List, as defined by the PRI QML/QPL standards. It is designated as a critical application item and must comply with SAE AS21922C and SAE AS18280H standards, with strict prohibitions against the use of Class I ozone-depleting chemicals, requiring any substitutes to be pre-approved. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331 table 1 with zero non-conformances accepted unless otherwise stated, and attributes are to be verified at specified levels matching AQLs of 0.1, 1.0, and 4.0 for critical, major, and minor characteristics respectively. The contract mandates full compliance with DLA packaging requirements per MIL-STD-2073-1E and marking standards per MIL-STD-129, with no special marking required. Packaging must be palletized according to DLA guidelines and shipped FOB origin with zero variance allowed in quantity. Delivery is required within 83 days, with the need ship date set for May 5, 2026, and the original required delivery date of May 21, 2026. The destination for delivery and inspection is DLA Distribution Jacksonville, Florida, with the freight shipping address and point of contact provided for coordination. The unit price is $968.00 per unit, totaling $936,224.00. Documentation, source approval, and technical compliance are governed by referenced DLA master lists and procurement policies, with the contract solicitation number SPE7L5-26-T-4756 and response deadline of August 17, 2026.

General Info

968 MS21922-5 aircraft fittings, compliant with SAE standards, delivery by May 5, 2026, $968 each, FOB origin.

Agency

Department Of Defense → LAND SUPPLIER OPNS ENGINESView Agency

NAICS

332996 - Fabricated Pipe and Pipe Fitting ManufacturingView NAICS

Place of Performance

BLDG 175 SWAN ROAD, JACKSONVILLE, FL, 32212-0103, US

Set-Aside

NONE

Documents

(1)

SPE7L5-26-T-4756.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLIER OPNS ENGINES
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → LAND SUPPLIER OPNS ENGINES
View Agency Profile
Office AddressUS
Contacts
Paul Doerfler
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SLEEVE,CLINCH,TUBE
SLEEVE, CLINCH, TUBE FITTING. AIRCRAFT APPLICATIONS..
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
THIS ITEM IS IDENTIFIED AS A COMMERCIAL ITEM (TO INCLUDE 'COMMERCIAL
OF A TYPE')
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
THIS IS A PERFORMANCE REVIEW INSTITUTE (PRI) QML OR QPL ITEM. PRODUCT
SUPPLIED TO THIS SPECIFICATION SHALL BE MANUFACTURED BY AN ACCREDITED
MANUFACTURER (FOR COMPONENTS) AND/OR ASSEMBLED BY AN ACCREDITIED
MANUFACTURER OR ACCREDITED ASSEMBLING DISTRIBUTOR (FOR ASSEMBLIES) AS
LISTED IN THE PRI QUALIFIED MANUFACTURER LIST (QML)OR QUALIFIED PRODUCTS
LIST (QPL) FOR THIS STANDARD. THE QML OR QPL IS AVAILABLE AT
WWW.EAUDITNET.COM.
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
CRITICAL APPLICATION ITEM
TDP Rev B Gen 2 IAW BASIC NON GOVT STD SAE AS21922C REVISION NR C DTD 05/01/2017 PART PIECE NUMBER: MS21922-5
SPE7L5-26-T-4756
SECTION B
TDP Rev B Gen 2 IAW REFERENCE NON GOVT STD SAE AS18280H REVISION NR H DTD 05/01/2021 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7014417209 0001 EA 968.000
NSN/MATERIAL:4730002898620
DELIVERY (IN DAYS):0083
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:025 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:D3 OPI:O
INTRMDTE CONT:DO INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3122
DLA DISTRIBUTION JACKSONVILLE
BLDG 175 SWAN ROAD
JACKSONVILLE FL 32212-0103
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3122
DLA DISTRIBUTION JACKSONVILLE
BLDG 175 SWAN ROAD
RAYMOND MORGAN 904-661-5135
JACKSONVILLE FL 32212-0103
SPE7L5-26-T-4756
SECTION B
PR: 7014417209 PRLI: 0001 CONT’D
US
Need Ship Date:05/05/2026 Original Required Delivery Date:05/21/2026
SPE7L5-26-T-4756 NSN/Part Number: 4730-00-289-8620 Quantity: 968 EA Purchase Request: 7014417209QTY: 968 Delivery: 83 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332996
New
DIBBS
Metal Buckles and Hardware Supply for Tactical HarnessesThe contract seeks the manufacture and supply of corrosion-resistant, high-strength metal buckles and plated hardware components designed for use in life-support carrying harnesses, with all items required to meet rigorous military specifications. These components are critical to the integrity and reliability of tactical harness systems, demanding precision engineering and materials capable of withstanding extreme environmental and operational stresses. The procurement is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the Small Business Administration are eligible to bid, reinforcing the Department of Defense’s commitment to supporting small business participation in defense supply chains. The solicitation, identified under NAICS code 332996 for Other Fabricated Metal Product Manufacturing, was posted on August 4, 2026, with a response deadline of September 3, 2026. It is managed by the ASC SUPPLIER OPER AE AND AF DIV of the Department of Defense, and performance will occur at an unspecified location. All submissions must align with the technical, quality, and delivery requirements inherent to military-grade life-support equipment, and bidders are expected to demonstrate capable production infrastructure, compliance with defense standards, and a clear pathway to consistent, on-time delivery. Interested parties must access the full solicitation through the provided DIBBS link to understand full technical specifications and submission protocols.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 16 hours ago

DEADLINE

in 29 days
View Details
NAICS: 332996
New
DIBBS
CLAMP, REPAIR, PIPE
Solicitation # SPE7M3-26-T-7822
The contract pertains to the procurement of two clamp repair pipe units with a nominal pipe size of 4 inches and a length of 7.5 inches, identified by NSN 4730-01-014-8717 and part number 226-048007-000. The total quantity required is two units, each priced at $2.00, with delivery required within 20 days from the contract award date, FOB origin, and no tolerance for variance in quantity. Inspection and acceptance occur at the destination, and all items must be packaged in compliance with ASTM D3951, though DLA Master List of Technical and Quality Requirements take precedence. Packaging must be marked and labeled per MIL-STD-129, and the unit of issue is each (EA), with packaging quantity per unit pack specified in the contract. The items must be palletized according to DLA packaging requirements and shipped via traceable freight methods, not parcel post. Delivery is directed to Fort Hood, Texas at Building 4925, Santa Fe Avenue, with the designated mark for and shipping address being the same. The shipment must be accompanied by the tracking control number W50YEF62090230 and must arrive no later than July 31, 2026, as per the original required delivery date. The solicitation number is SPE7M3-26-T-7822, issued under the NAICS code 332996 by the DLA Fluid Handling Division under the Department of Defense. All technical and quality specifications referenced by R or I codes are governed by the DLA Master List, with applicable revisions determined by the solicitation or award date. The primary point of contact is William Cain, and the contract is accessible via the DIBBS portal.
FLUID HANDLING DIVISION

POSTED

about 16 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332996
New
DIBBS
COUPLING HALF, QUICK
Solicitation # SPE7M0-26-T-028M
The contract pertains to a quick-disconnect coupling half, identified by NSN 4730-01-516-8346, with a quantity of one unit. It is classified as a commercial off-the-shelf item, and adequate catalog data is available to the procurement agency for evaluating alternatives. The item must comply with the DLA Packaging Requirements for Procurement and incorporate technical and quality specifications referenced by R or I numbers from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. The procurement is subject to the removal of government identification from non-accepted supplies. The solicitation number is SPE7M0-26-T-028M, posted on August 4, 2026, with responses due by August 17, 2026. The NAICS code is 332996, and the contracting agency is the Department of Defense through the Maritime Supply Chain ESOC Buys office, with performance located in Jacksonville, Florida, 32226-3404. Delivery is required within five days after delivery order issuance.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 16 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332996
New
DIBBS
ADAPTER, STRAIGHT, TUBE
Solicitation # SPE7M2-26-T-5992
This contract specifies the procurement of a straight tube-to-hose adapter made of brass, with a female UNF/NF threaded end sized at 1/2 inch outer diameter tube and 3/4 inch-16 thread, featuring a 45-degree seat, and a swivel male end designed for a 1/2 inch nominal hose size with an overall length of 1-15/16 inches. The product is classified as a critical application item and must strictly comply with technical and quality requirements referenced in the DLA Master List, including calibration standards per ANSI/NCSL Z540-1-1994 or ISO 10012-1. It is prohibited to contain mercury or mercury-containing compounds except under limited exceptions for batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and specific chemical reagents approved by NAVSEA. Portable devices containing mercury must be shock-proof and include a secondary containment. The use of Class I ozone-depleting chemicals is strictly banned. The adapter is sourced from multiple approved suppliers including Eaton Aeroquip LLC, Danfoss Power Solutions II, LLC, and others, each with designated part numbers. The item is identified by NSN 4730-00-542-2807 and is to be delivered in a quantity of 416 units, each priced at $416.00, for a total of $173,056.00. Delivery is due within 21 days of contract award, FOB origin, with inspection and acceptance occurring at destination. Packaging must conform to MIL-STD-2073-1E and marking to MIL-STD-129 with no special marking code. The product must be palletized per DLA packaging requirements and shipped to the specified DLA distribution facility in New Cumberland, Pennsylvania, with the required ship date of September 8, 2026, and original delivery deadline of March 27, 2027.
NUCLEAR REACTOR PROGRAM

POSTED

about 16 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332996
New
DIBBS
CAP, TUBE
Solicitation # SPE7M3-26-T-7595
The contract pertains to the procurement of 10 units of CAP, TUBE with NSN 4730013382226 for use on the B-2 aircraft, issued under solicitation SPE7M3-26-T-7595 by the Defense Logistics Agency’s Fluid Handling Division. Delivery is required within 168 days after order placement, with an original delivery deadline of April 5, 2027, and a need ship date of January 19, 2027. The contract specifies FOB origin delivery terms, meaning the contractor bears all transportation costs and risks until goods are loaded at the origin. Inspection and acceptance occur at the destination, specifically at the receiving warehouse in Tracy, California. Packaging must conform to MIL-STD-129 for marking and labeling, with palletization required to meet RP001: DLA Packaging Requirements for Procurement; ASTM D3951 is referenced but explicitly superseded by the more stringent MIL-STD-129 standards. All packaging must include GS1-128 linear barcodes and Data Matrix symbols as required by MIL-STD-129, and hazardous materials must be labeled per OSHA’s Hazard Communication Standard, 29 CFR 1910.1200. Radioactive materials exceeding specified thresholds must also be appropriately marked. The DLA Master List of Technical and Quality Requirements takes precedence over any other referenced standards. The unit of issue is each (EA), with zero variance permitted in quantity. Invoicing must be conducted through the Wide Area WorkFlow system, and payment processing is tied to the DoDAAC for the receiving activity. The contract incorporates standard Federal Acquisition Regulation clauses including those related to small business representation, equal opportunity, combating human trafficking, employment eligibility verification, sustainable products, hazardous material safety data, and NIST SP 800-171 cybersecurity compliance, with multiple deviations authorized under Deviation 2026-00038 and others. Offerors must represent their size status and socioeconomic certifications such as SDB, WOSB, SDVOSB, or HUBZone, and disclose UEI and CAGE codes if applicable. The contract type is implied to be fixed-price based on the use of clause 52.216-1 Alternate I, though the specific pricing is not provided in the available documentation. All proposals must be submitted electronically via the DLA
FLUID HANDLING DIVISION

POSTED

about 16 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332996
New
DIBBS
TEE, TUBE TO BOSS
Solicitation # SPE7M0-26-T-030X
The contract specifies the procurement of a TEE, TUBE TO BOSS with NSN 4730-01-397-1241, quantity of two units, to be delivered within five days of award under solicitation SPE7M0-26-T-030X. Delivery is FOB origin with no variance allowed in quantity, and inspection and acceptance occur at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization governed by DLA’s packaging requirements, and all technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements supersede other specifications. The item is sourced from approved suppliers including ADMIRAL VALVE LLC and CIRCOR NAVAL SOLUTIONS LLC, and tooling or casting/forging may be required, necessitating contact with DLA for support if unavailable. Delivery is directed to Pearl Harbor Naval Shipyard with specific shipping and receiving instructions, and the required delivery date is August 5, 2026. The contract is administered by the Department of Defense’s Maritime Supply Chain ESOc, with Grace Beck listed as the primary point of contact.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 16 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332996
New
DIBBS
ADAPTER, STRAIGHT, FL
Solicitation # SPE7M4-26-T-300J
The contract specifies the procurement of two straight flange adapters with NSN 4730-00-074-9640 and part number 474908, supplied by RTX Corporation under solicitation SPE7M4-26-T-300J. Delivery is required within 320 days from the contract date, with FOB origin terms, and acceptance occurs at the destination. The quantity is fixed at two units with zero variance permitted. All items must comply with DLA’s Master List of Technical and Quality Requirements referenced by R and I numbers, which override any conflicting standards such as ASTM D3951. Packaging must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements, with palletization and labeling instructions explicitly defined. Sampling inspections must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and critical attributes are subject to stringent verification levels. Configuration changes require formal engineering change proposals, and supplier approval requests must meet RC001 documentation standards. Items must be marked per RQ017 for physical identification, and government identification must be removed from non-accepted supplies per RQ011. The delivery address is DLA Distribution’s New Cumberland facility, and transportation follows DLAD Proc Notes C19 and C20. The contract was posted August 4, 2026, with responses due August 17, 2026.
FLUID HANDLING DIVISION

POSTED

about 16 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332996
New
DIBBS
ADAPTER, STRAIGHT, TU
Solicitation # SPE7M4-26-T-300G
This contract specifies the procurement of a straight aluminum alloy adapter with tube-to-boss connections, designed for aircraft applications. The adapter features a male tube end with a 0.250 inch nominal outer diameter and a 7/16 inch-20 UNF Class 3A right-hand thread with a 37-degree seat angle, and a female boss end with a 7/8 inch-14 UNF Class 3B right-hand thread measuring 1.672 inches nominal length. The component is anodized on both internal and external surfaces, has a hex wrenching size of 1.125 inches across flats, and must comply with Class 3 thread specifications. The product is subject to a prohibition on ozone-depleting chemicals, and any substitute materials require prior approval unless explicitly authorized by referenced standards. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with compliance mandatory under TDP Rev A per SAE AS5173E and AS4875/1A. Packaging must adhere to MIL-STD-2073-1E and MIL-B-117 specifications, with marking conforming to MIL-STD-129 and no special marking codes applied. The item is to be delivered FOB origin within 20 days, with zero variance allowed in quantity, inspected and accepted at destination, and shipped by traceable means exclusively—parcel post is prohibited. Six units are required under NSN 4730-00-060-2854 at a unit price of $6.00, totaling $36.00, with delivery directed to a U.S. Department of Defense facility in Columbus, Ohio. The solicitation number is SPE7M4-26-T-300G, issued under full and open competition, with a response deadline of August 17, 2026, and a required delivery date of October 14, 2025.
FLUID HANDLING DIVISION

POSTED

about 16 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332996
New
DIBBS
STRAINER ELEMENT, SE
Solicitation # SPE7L5-26-T-4757
The contract specifies the procurement of 29 units of a Strainer Element, SE, identified by NSN 4730-01-146-8368 and part number 3025T90P02, classified as a critical application item under the Department of Defense. Delivery is required within 136 days to the DLA Distribution facility in New Cumberland, Pennsylvania, with FOB origin terms and no variance permitted in quantity. Inspection and acceptance occur at the destination, and all items must be packaged in compliance with ASTM D3951, while strictly adhering to MIL-STD-129 for marking and labeling as mandated by DLA’s Master List of Technical and Quality Requirements, which supersede any conflicting standards. The unit of issue is each, with a total contract value based on a unit price of $29.00, and the packaging must conform to DLA’s RP001 standards including palletization guidelines. The solicitation number is SPE7L5-26-T-4757, with a response deadline of August 17, 2026, and a posted date of August 4, 2026, under NAICS code 332996. The point of contact is Paul Doerfler, reachable via email and phone, and all transportation details must follow DLAD Proc Notes C19 and C20. The delivery schedule requires shipment no later than April 21, 2026, with an original required delivery date of November 1, 2026. All items must be free of government identification if not accepted, and suppliers must reference the DLA Master List for all technical and quality conditions that apply, ensuring full compliance with federal procurement mandates.
LAND SUPPLIER OPNS ENGINES

POSTED

about 16 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332996
New
DIBBS
STRAINER ELEMENT, SE
Solicitation # SPE7MC-26-T-166F
The contract is for one sediment strainer element, identified by NSN 4730-01-431-6632 and part number 31423N, to be supplied by LESLIE CONTROLS, INC. Delivery is required within 20 days FOB destination to the USS McFaul DDG74 at FPO AE 09578, with no variance allowed in quantity. The item must comply with DLA packaging requirements based on MIL-STD-2073-1E, including specific packaging methods, materials, and marking in accordance with MIL-STD-129. The strainer element must not contain mercury or mercury-containing compounds unless specifically exempted for functional uses such as batteries, lamps, sensors, or instrument controls, and in those cases, secondary containment and shock-proofing are mandatory per NAVSEA 5100-003D. The contract incorporates technical and quality requirements referenced from the DLA Master List, with revisions controlled by the solicitation issue date. Transportation and shipment logistics follow DLAD procedure notes C19 and C20, and vendor compliance is monitored with government tracking identifiers including DIBBS solicitation number SPE7MC-26-T-166F, project code 9AL TP 2, and a required delivery date of July 31, 2026. Inspection and acceptance occur at the destination, and the point of contact is Nicole Betts of the Defense Logistics Agency.
Defense Logistics Agency

POSTED

about 16 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332996
New
DIBBS
COUPLING, PIPE
Solicitation # SPE7M1-26-U-4905
This contract is for the procurement of a coupling, pipe with NSN 4730-01-382-1646, under solicitation SPE7M1-26-U-4905, issued by the Department of Defense through the Maritime Supply Chain. The item is classified as a critical application and must be supplied either as Royal Brass Inc part number 106-0066 or Parker-Hannifin Corp part number 222P-8-8. The contract is a total small business set-aside with a procurement quantity of 202 units at a unit price of $1000238685, totaling $202,000, with no variance allowed in quantity. Delivery is required within 57 days FOB origin, with inspection and acceptance occurring at destination. Packaging must comply with MIL-STD-2073-1E and marking per MIL-STD-129, with no special marking required. All packaging and handling must adhere to DLA packaging requirements. Ozone-depleting chemicals are strictly prohibited, and any substitute materials must be pre-approved unless explicitly authorized by specification. The unit of issue is each, and compliance with DLA’s master list of technical and quality requirements is mandatory, with applicable revisions controlled by the solicitation issue date. The point of contact is Bryan Fair, and the solicitation response deadline is August 19, 2026.
MARITIME SUPPLY CHAIN

POSTED

about 16 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332996
New
DIBBS
ELBOW, TUBE
Solicitation # SPE7M1-26-U-4874
The contract solicitation SPE7M1-26-U-4874 is a total small business set-aside for the procurement of 271 elbow, tube components with NSN 4730-00-133-3196, under a 175-day delivery timeline. All supplies must comply with DLA packaging, technical, and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue or award date depending on acquisition size. Key compliance obligations include adherence to configuration change management, quality conformance inspection, and origin inspection requirements, along with strict prohibitions against intentional use of mercury or mercury-containing compounds except in specific exempted applications such as batteries, fluorescent lights, and weapon systems, which must still meet secondary containment and shockproof standards per NAVSEA 5100-003D. Class I ozone-depleting chemicals are entirely banned, and any substitute chemicals require prior approval unless explicitly authorized by the specification. The supplier must provide one Certificate of Quality Compliance (COQC) for each manufacturing lot, prepared in accordance with the Supplemental Quality Assurance Provision, and make it available for Government review at the time of inspection. Electronic copies of each COQC must be uploaded via the iRAPT system as attachments to the Receiving Report for Government records, and the Government may sign off on the WAWF receiving report upon confirmation of compliance. The solicitation enforces full and open competition under a small business set-aside classification, with all required data included in the item’s price. The contract is managed by the Department of Defense’s Maritime Supply Chain, and inquiries should be directed to the primary point of contact, Bryan Fair, via the provided email and phone number.
MARITIME SUPPLY CHAIN

POSTED

about 16 hours ago

DEADLINE

in 14 days
View Details

More opportunities from Department Of Defense → LAND SUPPLIER OPNS ENGINES

Same awarding agency

NAICS: 336360
New
DIBBS
LINER, VEHICULAR FEN
Solicitation # SPE7L5-26-T-4748
The contract solicitation SPE7L5-26-T-4748 seeks the procurement of 10 units of LINER, VEHICULAR FEN with NSN 2510-01-643-4911 at a unit price of $10.00 totaling $100.00, to be delivered FOB origin within 21 days of award, with no quantity variance allowed. The product must comply with MIL-STD-2073-1E packaging standards, including specified preservation methods, cushioning materials, and unit container types, and must be marked in accordance with MIL-STD-129 with special marking code ZZ indicating required instructional labels such as OPEN THIS SIDE and DO NOT BEND. Palletization must follow DLA Packaging Requirements, and all items must be shipped to the designated DLA Distribution facility in New Cumberland, PA. Delivery is due by September 8, 2026, though the original required delivery date was April 1, 2027. The liner includes die-cuts to maintain shape during packaging and enhance stacking strength. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, with the applicable revision determined by the solicitation issue or award date. Transportation and shipping directives are governed by DLAD PROC NOTES C19 and C20, and the solicitation is managed by the Department of Defense under NAICS code 336360 with primary point of contact Bradley Evans.
Motor Vehicle Seating and Interior Trim Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333618
New
DIBBS
PARTS KIT, ENGINE FU
Solicitation # SPE7L5-26-T-4758
The contract is for a Parts Kit, Engine Fuel Pump with National Stock Number 2910-00-678-4675, with a quantity of 50 units to be delivered 265 days after order. The solicitation number is SPE7L5-26-T-4758, issued under a Total Small Business Set-Aside, with NAICS code 333618 for Engine, Turbine, and Power Transmission Equipment Manufacturing, and is managed by the Department of Defense through the Land Supplier Operations Engines organization. The technical data associated with this item is subject to export control under either ITAR or EAR, meaning any disclosure to foreign persons—even within the United States—requires prior authorization from the Department of State or Commerce. DFARS 252.225-7048 governs this restriction, and only DLA contractors with approved US/Canada Joint Certification Program status, completed training on handling DOD export-controlled data, and formal DLA approval may access the technical data. The place of performance is Tracy, California, and the primary point of contact is Mary Rowley, reachable via email and phone provided. The solicitation was posted on August 4, 2026, with responses due by August 17, 2026.
Other Engine Equipment Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332722
New
DIBBS
SCREW, MACHINE
Solicitation # SPE7L5-26-T-4745
The contract specifies the procurement of 26 machine screws with NSN 5305-01-447-4035 and part number 81334466N, manufactured by FAIRBANKS MORSE, LLC, under solicitation SPE7L5-26-T-4745. Delivery is required within 171 days of award, with a strict zero variance in quantity and FOB origin terms. Inspection and acceptance occur at the destination warehouse in Tracy, CA, and all packaging must comply with MIL-STD-2073-1E and MIL-STD-129 marking standards, including the use of the U pack code and prohibited use of mercury or mercury compounds in preservation, packaging, or marking. The item is designated as a critical application item, and all technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with sampling procedures mandated to follow MIL-STD-1916 or ASQ H1331 Table 1 using zero non-conformances unless otherwise stated. No mercury-containing materials are permitted except for specific functional uses such as batteries or instrumentation as defined by NAVSEA, and portable devices with mercury must include a secondary containment boundary. The contract also enforces DLA packaging and palletization requirements, with shipment directed to the designated receive warehouse. The solicitation was posted on August 4, 2026, with responses due by August 12, 2026, and the original required delivery date is November 20, 2026, though the delivery window extends to January 31, 2027. The unit of issue is each (EA) at a unit price of $26.00 for a total contract value of $676.00. The NAICS code 332722 applies, and the contracting organization is the Department of Defense under Land Supplier Operations Engines. All documentation, including source approval requests, must adhere to specified regulatory frameworks, and transportation logistics follow DLA procedural notes C19 and C20. The point of contact is Christopher Walker, reachable via email and phone provided, and the full solicitation details can be accessed through the DIBBS portal.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, HEXAGON H
Solicitation # SPE7L5-26-T-4747
The contract specifies the procurement of hexagon head cap screws, identified by NSN 5305-01-609-3090 and part number 001120558, manufactured by Fairbanks Morse, LLC, with a total quantity of eight units priced at $8.00 each. Delivery is required within five days of contract award, FOB origin, with no tolerance for quantity variance, and both inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods, unit container requirements, and packing codes, while marking must adhere to MIL-STD-129 with no special markings required. Palletization follows DLA packaging standards, and shipment must utilize the fastest traceable means, explicitly prohibiting parcel post. The destination for parcel post is listed but must not be used; freight must be sent to the U.S. Naval Station in National City, CA. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R numbers, with sampling methods aligned with MIL-STD-1916 or comparable zero-based plans, and unspecified attributes treated as major with targeted AQLs. The contract falls under solicitation SPE7L5-26-T-4747, with a required delivery date of July 30, 2026, and is managed by the Department of Defense’s Land Supplier Operations Engines division, with primary point of contact Christopher Walker. Government use codes, project identifiers, and distribution codes are included for internal tracking, and the unit of issue is defined according to DoD standards.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336390
New
DIBBS
GUARD, SPLASH, VEHICU
Solicitation # SPE7L5-26-T-4751
The contract involves the procurement of two units of a vehicular splash guard with NSN 2540-01-643-4848 under solicitation SPE7L5-26-T-4751, issued by the Department of Defense through the Land Supplier Operations Engines branch. Delivery is required within 21 days to the DLA Distribution Barstow Central Receiving Warehouse in Barstow, California, with shipment terms FOB origin and no variance allowed in quantity. The item must be packaged in accordance with DLA’s Master List of Technical and Quality Requirements, which supersedes ASTM D3951, and all packaging must comply with MIL-STD-129 labeling standards. If the material is classified as hazardous under Fed-Std-313, it must adhere to TQ requirement IP025; otherwise, commercial packaging per ASTM D3951 is acceptable pending DLA’s superior requirements. Palletization must follow RP001 packaging guidelines, and government identification must be removed from non-accepted supplies. The required delivery date is February 25, 2027, with a need ship date of September 8, 2026, and the contract specifies a unit price of $2.00 per unit for a total value of $4.00. Transportation instructions reference DLAD Proc Notes C19 and C20, and all correspondence and deliveries must use the designated parcel post address. The solicitation was posted on August 4, 2026, with a response deadline of August 17, 2026, and the NAICS code is 336390. Primary point of contact is Bradley Evans, reachable via phone and email provided.
Other Motor Vehicle Parts Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336390
New
DIBBS
PIPE, EXHAUST
Solicitation # SPE7L5-26-T-4754
The contract pertains to the procurement of seven exhaust pipes identified by NSN 2540015662444 and part number 3642499 from OSHKOSH DEFENSE LLC, under solicitation SPE7L5-26-T-4754. Delivery is required within 28 days of contract award, with all items to be shipped FOB origin, and no variance in quantity is permitted. Inspection and acceptance occur at the destination, specifically at the DLA Distribution facility in New Cumberland, Pennsylvania. Packaging must comply with DLA Master List of Technical and Quality Requirements, which supersede ASTM D3951; if the item is nonhazardous, it must be commercially packaged in accordance with ASTM D3951, but if hazardous under FED-STD-313, it must follow TQ requirement IP025. All packaging and labeling must strictly adhere to MIL-STD-129, and palletization must conform to RP001 DLA Packaging Requirements. The unit of issue is each, with a total price of $7.00 per unit, and the original delivery deadline is August 31, 2026, with a needed ship date of September 15, 2026. Technical and quality specifications referenced via R or I numbers are governed by the DLA Master List in effect at the time of solicitation issuance, and all contractual obligations are subject to DLA procedural notes C19 and C20 for transportation and first destination handling.
Other Motor Vehicle Parts Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336390
New
DIBBS
GUARD, SPLASH, VEHICU
Solicitation # SPE7L5-26-T-4753
The contract specifies the procurement of six units of a vehicular splash guard with NSN 2540016434848 and part number 4180688 from OSHKOSH DEFENSE LLC under solicitation SPE7L5-26-T-4753. Each unit is priced at $6.00, with a total contract value of $36.00. The items must be delivered within 119 days from the ship date of December 15, 2026, with a final delivery deadline of June 3, 2027, and are to be shipped FOB origin with no tolerance for quantity variance. Inspection and acceptance occur at the destination, requiring strict adherence to DLA’s packaging standards, including MIL-STD-129 for labeling and palletization per RP001. Packaging must comply with either TQ requirement IP025 for hazardous materials under FED-STD-313 or ASTM D3951 for non-hazardous items, with DLA’s Master List of Technical and Quality Requirements taking precedence over ASTM standards. Two delivery addresses are specified: one for New Cumberland, PA, and another for Barstow, CA, with detailed transportation protocols outlined in DLAD procedural notes C19 and C20. All packaging and unit of issue must align with the contract’s specified Quantity per Unit Pack (QUP: 001) and the DoD authorized unit of issue as referenced in the official DLA document.
Other Motor Vehicle Parts Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332510
New
DIBBS
STRAP, WEBBING
Solicitation # SPE7L5-26-T-4752
The contract specifies the procurement of 56 units of webbing strap with NSN 5340-01-656-0574 and part number 4173608 under solicitation SPE7L5-26-T-4752, issued by the Department of Defense through DLA. The unit price is $56.00 per ea, totaling $3,136.00, with delivery required within 21 days at FOB origin, and no variance allowed in quantity. Inspection and acceptance occur at the destination, with all packaging required to comply with DLA’s packaging standards RP001 and MIL-STD-129 for marking and labeling. Packaging must follow ASTM D3951 for non-hazardous materials or TQ requirement IP025 if classified hazardous per FED-STD-313, with DLA’s Master List of Technical and Quality Requirements taking precedence over any conflicting industry standards. The designated delivery address is DLA Distribution’s New Cumberland Facility in Pennsylvania, with a need ship date of September 8, 2026, and an original required delivery date of January 6, 2027. Transportation and shipping instructions are governed by DLAD Proc Notes C19 and C20. The primary point of contact is Bradley Evans, and compliance with all referenced technical and quality specifications incorporated by reference from the DLA Master List is mandatory.
Hardware Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332999
New
DIBBS
SHIM
Solicitation # SPE7L5-26-T-4746
The contract pertains to the procurement of a shim identified by NSN 5365-01-614-5627 and part number 14001422, with a quantity of 34 units, under solicitation SPE7L5-26-T-4746. Delivery is required FOB origin within 171 days, with no variance allowed in quantity. The item must comply with DLA’s packaging requirements as outlined in RP001, including adherence to MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and specific packaging codes including preservative method 10, wrap material JA, and unit container A1. Marking must follow standard guidelines with no special codes applied. The delivery destination is DLA District San Joaquin in Tracy, California, with same address used for freight shipping and parcel post. Inspection and acceptance occur at the destination. The contract incorporates technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, which governs verification standards. Sampling for quality assurance must follow MIL-STD-1916 or ASQ H1331 Table 1, or a comparable zero-based plan; non-conformances must result in rejection unless otherwise specified. Attributes are to be classified with verification levels VII, IV, and II for critical, major, and minor characteristics respectively, and unspecified attributes are deemed major. The manufacturer may choose between attribute or variable inspection methods under MIL-STD-1916 unless dictated otherwise. Acceptance criteria require zero non-conformances in the sample lot unless amended by the contract. The unit of issue is EA, and the contract price is $34.00 per unit. The solicitation was issued on August 4, 2026, with a response deadline of August 12, 2026, and the delivery must be completed by January 31, 2027, with an original required delivery date of May 15, 2027. Point of contact for the contract is Christopher Walker of the Department of Defense.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
NUT, SELF-LOCKING, HE
Solicitation # SPE7L5-26-T-4749
The contract specifies the procurement of 119 self-locking nuts with the NSN 5310-01-551-9934 and part number 00116160208, manufactured by Fairbanks Morse, LLC, under solicitation SPE7L5-26-T-4749. Delivery is required within 171 days from the contract date, with shipment FOB origin and final inspection and acceptance occurring at the destination in San Diego, California. The supply must comply with MIL-STD-2073-1E packaging standards and MIL-STD-129 marking requirements, with no special marking designated. Packaging and palletization must adhere to DLA’s RP001 procurement guidelines. The contract prohibits the intentional use of mercury or mercury-containing compounds in or on the hardware, except for designated functional applications such as batteries, fluorescent lamps, instruments, sensors, weapon systems, or specific chemical reagents as outlined by NAVSEA; portable mercury-containing devices must include shock-proof construction and a secondary containment barrier per NAVSEA 5100-003D. Quality assurance follows MIL-STD-1916 or ASQ H1331, Table 1, or an equivalent zero-based sampling plan unless otherwise directed. Critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, with unspecified attributes treated as major. Sampling may be performed using attribute or variable inspection methods at the manufacturer’s discretion or per contract stipulation, and MIL-STD-105/ASQ Z1.4 may only be used to determine sample size with zero non-conformances required for acceptance unless amended. The contract incorporates DLA’s Master List of Technical and Quality Requirements identified by R or I numbers, with the applicable revision determined by the solicitation or award date depending on acquisition size. The unit of issue is each (EA), with a zero percent variance allowed in quantity, and the deliverable must be shipped by January 31, 2027, to the DLA Distribution San Diego facility at 3581 Cummings Road, Building 3581, San Diego, CA 92136-3581.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332618
New
DIBBS
PIN, SPRING
Solicitation # SPE7L5-26-T-4750
The contract is for the procurement of 3 spring pins, designated by NSN 5315-01-547-3985 and part number 00235100302, sourced as a commercial off-the-shelf item from Fairbanks Morse, LLC. The item is classified as a critical application component and must comply with strict technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements. Mercury and mercury-containing compounds are fully prohibited in the item, its packaging, preservation, and marking, except for specific functional uses such as batteries, fluorescent lamps, or instruments as defined by NAVSEA, which must include secondary containment and be shock-proof per NAVSEA 5100-003D. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, using the prescribed preservation method, materials, and unit containers, with no special marking required. The item is to be delivered FOB origin in 185 days to the designated receiving warehouse in Tracy, CA, with a required ship date of February 14, 2027. The contract enforces zero variance in quantity and mandates final inspection and acceptance at destination. Transportation and shipping details are governed by DLA procedural notes, and all documentation must align with DLA packaging and labeling standards.
Other Fabricated Wire Product Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details