Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

SLIDE, DRAWER, EXTENS

Active
SPE7L1-26-T-06W8Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract is for the procurement of one extension drawer slide, identified by NSN 5340014766067 and part number G308812-4. The order is associated with purchase request 7018170448 and solicitation number SPE7L1-26-T-06W8. Delivery is required within 20 days, with a required delivery date of April 24, 2026, shipping to the USS Theodore Roosevelt CVN 71. The supplier must adhere to strict technical and quality requirements, including DLA packaging standards and MIL-STD-129 marking. A critical restriction prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except for specific functional exceptions. The contract specifies FOB Origin shipping and requires the use of the fastest traceable means for delivery, explicitly prohibiting the use of parcel post.

General Info

Procurement of one extension drawer slide for USS Theodore Roosevelt by April 24, 2026.

Agency

Department Of Defense → LAND SUPPLY CHAINView Agency

NAICS

334419 - Other Electronic Component ManufacturingView NAICS

Place of Performance

UNIT 100250 BOX 3351, FPO, AP, 96632, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLY CHAIN
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → LAND SUPPLY CHAIN
View Agency Profile
Office AddressUSA
Contacts
ISABELLE SZULEWSKI
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SLIDE,DRAWER,EXTENS
SLIDE, DRAWER, EXTENSION
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
JONATHAN ENGINEERED SOLUTIONS CORP. 05236 P/N 182300-R
RAYTHEON COMPANY 49956 P/N G308812-4
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 49956 G308812 REVISION NR M DTD 09/24/1999 PART PIECE NUMBER: G308812-4
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE7L1-26-T-06W8
SECTION B
PR: 7018170448 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018170448 0001 EA 1.000
NSN/MATERIAL:5340014766067
DELIVERY (IN DAYS):0020
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:10 OPI:O
INTRMDTE CONT:D3 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
IP056: MERCURY OR MERCURY COMPOUNDS ARE PROHIBITED IN PRESERVATION,
PACKAGING, PACKING AND MARKING.
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PARCEL POST ADDRESS:
N21247
USS THEODORE ROOSEVELT CVN 71
UNIT 100250 BOX 3351
FPO AP 96632
US
RDD 777 SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
N21247
USS THEODORE ROOSEVELT CVN 71
DLA VENDORS: USE VSM FOR
US
M/F: (TCN) N2124751910770
RDD: 777
PROJ: ZH9 TP 2
SUPP ADD: N48096 SIG: C
FOR GOVERNMENT USE ONLY: (IPD) 06
DIC: A4A DIST: V9B ADV: 2A FC: VO
SPE7L1-26-T-06W8
SECTION B
PR: 7018170448 PRLI: 0001 CONT’D
Need Ship Date:00/00/0000 Original Required Delivery Date:04/24/2026
SPE7L1-26-T-06W8 NSN/Part Number: 5340-01-476-6067 Quantity: 1 EA Purchase Request: 7018170448QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334419
New
DIBBS
Manufacture and Supply of RF Cable Assemblies (NSN 5995-01-614-5111)
ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334419
New
DIBBS
WIRING HARNESS, BRANCHE
Solicitation # SPE4A0-26-T-4646
This contract is for the procurement of two branched wiring harnesses, identified by NSN 6150-01-582-6192 and Daimler Truck North America part number A06-66549-000. The order is issued by the Department of Defense under solicitation SPE4A0-26-T-4646 with a required delivery date of September 2, 2026, and a delivery timeframe of five days after order. Shipping is FOB Origin with destination inspection and acceptance, destined for a facility in Kaiserslautern, Germany. The agreement mandates strict adherence to DLA packaging requirements, MIL-STD-129 marking, and MIL-STD-2073-1E packaging data. Quality assurance must follow MIL-STD-1916 or ASQ H1331 sampling plans, with zero non-conformance required for acceptance. Additionally, the contractor must comply with Covered Defense Information regulations and CMMC Level 2 self-assessment requirements.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, SPECIAL
Solicitation # SPE7L5-26-T-5302
This solicitation from the Department of Defense, specifically the Land Supplier Opns Engines agency, is for the procurement of 178 special purpose electrical cable assemblies under part number 5995-00-772-8813. The contract is designated as a HUBZone set-aside and requires delivery within 161 days after the order is received. Performance is centered in Barstow, California, with the solicitation period running from September 3 to September 14, 2026. The contract carries stringent compliance and security requirements, including CMMC Level 2 certification for third-party assessment and adherence to DLA packaging and quality standards. Because the item involves technical data subject to ITAR or EAR export controls, contractors must have an approved US/Canada Joint Certification Program certification and complete specific Department of Defense training to access the data. Additionally, the agreement mandates strict configuration change management and the removal of government identification from any non-accepted supplies.
LAND SUPPLIER OPNS ENGINES

POSTED

about 8 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE4A6-26-T-26MB
This solicitation is for the procurement of one specialist purpose cable assembly, identified by NSN 6150-01-584-8586, for the Department of Defense under the ASC Commodities Division. The contract requires delivery within 155 days after receipt of order and is managed under solicitation number SPE4A6-26-T-26MB. Compliance requirements are stringent, necessitating CMMC Level 2 certification from a Third-Party Assessment Organization and adherence to specific physical identification and bare item marking standards. Furthermore, the item is subject to strict export controls under ITAR and EAR regulations. Access to technical data is limited to DLA contractors with approved US/Canada Joint Certification Program certification and completed export-control training.
ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
SWITCH, SLIDE
Solicitation # SPE7M8-26-Q-0234
This solicitation from the Department of Defense Electrical Devices Division is for the procurement of three slide switches under National Stock Number 5930-01-465-9075. The contract requires delivery within 120 days after the order is placed and is categorized under NAICS code 334419. Performance is designated for New Cumberland, Pennsylvania. The agreement incorporates specific DLA packaging and quality requirements, including the removal of government identification from any non-accepted supplies. Offerors must provide a complete data package for both approved and alternate parts. The solicitation was posted on September 3, 2026, with a response deadline of September 18, 2026.
ELECTRICAL DEVICES DIV

POSTED

about 8 hours ago

DEADLINE

in 15 days
View Details
NAICS: 334419
New
DIBBS
SWITCH, PUSH
Solicitation # SPE7M8-26-T-6405
This contract is for the procurement of 34 push-button switches, identified by NSN 5930011788315 and part number 10EA1C1F2J1N4(B) from Safran Electronics and Defense. The order is managed under solicitation SPE7M8-26-T-6405 and is designated as a total small business set-aside. Delivery is required within 468 days, with an original required delivery date of October 14, 2026, and a need ship date of December 27, 2027. The shipment is FOB Origin and will be delivered to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. Compliance with DLA packaging requirements RP001 and MIL-STD-129 is mandatory, with specific instructions to use ASTM D3951 for non-hazardous materials or TQ requirement IP025 for hazardous materials. Inspection and acceptance will take place at the destination.
ELECTRICAL DEVICES DIV

POSTED

about 8 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334419
New
DIBBS
SWITCH, TOGGLE
Solicitation # SPE7M2-26-T-6660
This contract is a solicitation for the procurement of 36 toggle switches, identified by NSN 5930001107651. The requirement specifies critical application items from Setra Systems, Inc. (P/N 15709) or Carling Technologies, Inc. (P/N HM25A-73). Delivery is required within 168 days, with a need ship date of March 2, 2027, and an original required delivery date of May 11, 2027. The items are to be delivered FOB Origin to the DLA Distribution New Cumberland facility in Pennsylvania. The contract mandates strict adherence to DLA packaging and marking standards, specifically MIL-STD-2073-1E and MIL-STD-129. A significant restriction is placed on the use of mercury or mercury-containing compounds, which are prohibited from being intentionally added to the hardware or used in preservation and packaging, with limited exceptions for specific functional components. Inspection and acceptance will take place at the destination.
NUCLEAR REACTOR PROGRAM

POSTED

about 8 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334419
New
DIBBS
PARTS KIT, ELECTRONIC
Solicitation # SPE7M5-26-T-403G
This contract is a solicitation issued by the Department of Defense Active Devices Division for the procurement of electronic parts kits, specifically part number D000K762 from Oshkosh Defense LLC, under NSN 5999017245797. The requirement consists of two separate line items, each for a quantity of one unit, with a total quantity of two. Delivery is required within 106 days, with specific shipping destinations at DLA Distribution Albany, Georgia, and DLA Distribution New Cumberland, Pennsylvania. The agreement mandates strict adherence to technical and quality requirements, including MIL-STD-129 for marking and MIL-STD-2073-1 for preservation and packaging of kits. Shipping is designated as FOB Origin, with inspection and acceptance occurring at the destination. The solicitation is identified by number SPE7M5-26-T-403G and falls under NAICS code 334419.
ACTIVE DEVICES DIVISION

POSTED

about 8 hours ago

DEADLINE

in 5 days
View Details
NAICS: 334419
New
DIBBS
BEAD BREAKER, PNEUMATIC
Solicitation # SPE7L1-26-T-06V4
This contract is for the procurement of one pneumatic tire bead breaker, identified by NSN 4910-01-731-2687 and Summit Tool Company part number 52695. The order is issued by the Department of Defense Land Supply Chain under solicitation number SPE7L1-26-T-06V4. Delivery is required within 20 days after receipt of the order, with a final required delivery date of September 1, 2026. The item is to be delivered FOB destination to the USS Comstock LSD 45. The supplier must adhere to DLA master list technical and quality requirements, specifically regarding packaging and the removal of government identification from non-accepted supplies. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization following RP001 guidelines. Additionally, the contract strictly prohibits the use of Class I ozone depleting chemicals in the delivery of the item, requiring approved substitutes if necessary.
LAND SUPPLY CHAIN

POSTED

about 8 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, SPECIAL
Solicitation # SPE4A6-26-T-26KK
This contract is for the procurement of one special purpose electrical cable assembly, identified by NSN 6150-01-474-9297 and part number 6-246-003418. The order is issued by the Department of Defense ASC Commodities Division with a required delivery date of September 1, 2026, and a delivery timeframe of five days after order. Shipping is designated as FOB Origin, with the final destination being the DLA Distribution Management Office in Yermo, California. The supplier must adhere to strict quality and packaging standards, including DLA packaging requirements, ASTM D3951, and MIL-STD-129 for marking and labeling. Quality assurance will be governed by MIL-STD-1916 or ASQ H1331 sampling plans, with inspection and acceptance occurring at the destination. All technical and quality requirements are governed by the DLA Master List, and the shipment must be sent via the fastest traceable means, specifically prohibiting the use of parcel post.
ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
LINEAR TRANSDUCER
Solicitation # SPE7M1-26-T-326P
This solicitation, issued by the Department of Defense Maritime Supply Chain under solicitation number SPE7M1-26-T-326P, is for the procurement of 36 linear transducers with the national stock number 6625-00-053-4553. The items must be delivered within 125 days after the order is received, with the place of performance located in San Diego, California. The contract is subject to strict technical and quality requirements, including DLA packaging standards and configuration change management. Because the item is based on a source controlled drawing, only approved sources cited on the drawing may furnish the items. Additionally, the contract involves covered defense information and is subject to ITAR and EAR export controls, requiring contractors to have approved US/Canada Joint Certification Program certification and completed specific training to access technical data.
MARITIME SUPPLY CHAIN

POSTED

about 8 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, SPECIAL
Solicitation # SPE4A0-26-T-4670
This contract is for the procurement of one special purpose electrical cable assembly, identified by NSN 6150-01-588-5621. The item is designated as a critical application item and must be manufactured according to specific technical data packages and drawings, including basic drawing 30554 04-20422 and various reference drawings. Delivery is required within five days after order, with a required delivery date of September 3, 2026, shipping FOB origin to a US Army distribution point in Hohenfels, Germany. The agreement mandates strict adherence to DLA packaging requirements, specifically ASTM D3951 and MIL-STD-129 for marking and labeling. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 sampling plans, with a requirement for zero non-conformances in sample lots. The contract also incorporates higher-level quality requirements and specifies that all shipments must be sent via the fastest traceable means, explicitly prohibiting the use of parcel post.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → LAND SUPPLY CHAIN

Same awarding agency

NAICS: 332510
New
DIBBS
RETRACTOR, CABLE
Solicitation # SPE7L1-26-T-06X1
This contract is for the procurement of cable retractors under solicitation SPE7L1-26-T-06X1 for the Department of Defense Land Supply Chain. The requirement consists of two line items for NSN 5340012694423, with a total quantity of five units across two separate purchase requests. The first request is for four units to be delivered to Fort Campbell, Kentucky, and the second is for one unit to be delivered to Fort Wainwright, Alaska. The items are designated as critical application items with approved part numbers from Oshkosh Defense LLC, Hannay Reels Inc, and Delmaco Manufacturing Inc. Delivery is required within 20 days after receipt of order, with required delivery dates in April 2026. The contract specifies FOB Origin shipping, destination inspection and acceptance, and strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. All shipments must be sent via traceable means.
Hardware Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
SPRING, HELICAL, COMPRES
Solicitation # SPE7L1-26-T-06W0
This solicitation, issued by the Department of Defense Land Supply Chain agency, is for the procurement of four helical compression springs under NSN 5360-01-442-8495. The contract requires delivery within 192 days after the order is placed. The procurement is categorized under NAICS code 332510 and is managed by the Defense Logistics Agency. The contract is subject to strict technical and quality requirements, including specific DLA packaging standards and the removal of government identification from non-accepted supplies. Notably, the item contains technical data subject to ITAR or EAR export controls, meaning it cannot be exported or disclosed to foreign persons without prior authorization. Access to this data is limited to contractors with approved US/Canada Joint Certification Program certification and completed export-control training.
Hardware Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332722
New
DIBBS
COVER, ACCESS
Solicitation # SPE7L1-26-T-06D8
This solicitation, issued by the Department of Defense Land Supply Chain under solicitation number SPE7L1-26-T-06D8, is for the procurement of one unit of an access cover, identified by NSN 5340-01-611-9343. The contract requires delivery within 10 days after the order is received and falls under NAICS code 332722. The agreement is subject to specific Defense Logistics Agency requirements, including RP001 for packaging and RQ011 regarding the removal of government identification from non-accepted supplies. Notably, the item contains technical data subject to ITAR or EAR export controls, meaning it cannot be exported or disclosed to foreign nationals without prior authorization from the Department of State or Commerce. Access to this data is restricted to contractors with approved US/Canada Joint Certification Program certification and completed DLA export-control training.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
BRACKET, MOUNTING
Solicitation # SPE7L1-26-T-06V1
This solicitation, issued by the Department of Defense Land Supply Chain for the Defense Logistics Agency, is for the procurement of one mounting bracket under NSN 5340-01-480-8692. The contract requires delivery within 20 days after receipt of the order and is open to full and open competition. Performance is designated for Fort Hood, Texas, with the solicitation period running from September 3 to September 14, 2026. Compliance requirements are stringent, necessitating CMMC Level 2 certification from a Certified Third-Party Assessment Organization. The contract is subject to strict export controls under ITAR and EAR regulations, meaning technical data cannot be exported or disclosed to foreign nationals without prior authorization from the Department of State or Commerce. Additionally, contractors must adhere to DLA packaging requirements, configuration change management protocols, and specific technical and quality standards listed in the DLA Master List.
Hardware Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 11 days
View Details
NAICS: 314910
New
DIBBS
STRAP, WEBBING
Solicitation # SPE7L1-26-Q-1605
This contract, identified as solicitation SPE7L1-26-Q-1605, is for the procurement of four webbing straps under National Stock Number 5340-01-452-0332. The item is designated as a critical application item associated with Curtiss-Wright Flow Control Service part number 52D6362-1 and Engineered Arresting System Corporation. The agreement is established as a Firm Fixed Price contract with a delivery requirement of 90 days after receipt of order. Inspection and acceptance will occur at the destination, with shipping handled as FOB Origin. The supplier must adhere to DLA packaging requirements, specifically RP001 and MIL-STD-129, and ensure that any hazardous materials are packaged according to TQ requirement IP025 or commercially per ASTM D3951. Delivery is directed to Tyndall AFB in Florida via the fastest traceable means, excluding parcel post.
Textile Bag and Canvas Mills

POSTED

about 8 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, EXTENSI
Solicitation # SPE7L1-26-Q-1607
This contract is a firm fixed price solicitation for the procurement of 309 helical extension springs, identified by NSN 5360-01-242-6234. The items must be manufactured according to the current revision of the applicable part standards, specifically SAE AS24586D and SAE AS13572. Delivery is required within 60 days after the order is placed, with inspection and acceptance occurring at the destination. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging standards under ASTM D3951 and MIL-STD-129, as well as palletization per RP001. Quality assurance and sampling must follow MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan. The contract is open to full and open competition and includes provisions for the removal of government identification from non-accepted supplies and the handling of covered defense information.
Spring Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333612
New
DIBBS
SHAFT, SHOULDERED
Solicitation # SPE7L1-26-R-0112
This contract is a presolicitation by the Defense Logistics Agency Land and Maritime for 25 units of a shouldered shaft, identified by NSN 3040-01-180-4101. The requirement falls under NAICS code 333612 and specifies a delivery timeline of 364 days with shipping set as FOB Origin. Ontic Engineering and Manufacturing, Inc. is listed as an approved source with part number 2012B58. The final award decision will be determined by a combination of price, delivery, and performance. To be eligible for the award, offerors must possess an approved JCP certification and authorization from the DLA controlling authority to access export-controlled data. This item is designated for military use only and is not considered a commercial item, meaning it will be solicited under FAR Part 15. Proposals should be submitted via DIBBS or emailed to the contract specialist, Logan McLaughlin, in English and US dollars.
Speed Changer, Industrial High-Speed Drive, and Gear Manufacturing

POSTED

about 8 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 336310
New
DIBBS
O-RING
Solicitation # SPE7L1-26-T-06W6
This solicitation, issued by the Department of Defense Land Supply Chain, is for the procurement of 11 O-rings under National Stock Number 5331-01-692-5902. The contract requires delivery within 205 days after the order is placed and is associated with purchase request 7018068809. Performance will take place in Tracy, California, and the solicitation is categorized under NAICS code 336310. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging standards and documentation for source approval requests. A critical compliance requirement is that all supplied items must be completely free of asbestos, and any alternative materials must be approved according to specified clauses. Responses to this solicitation are due by September 14, 2026.
Motor Vehicle Gasoline Engine and Engine Parts Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
CLAMP, SYNCHRO
Solicitation # SPE7L1-26-T-06V3
This contract is a solicitation from the Department of Defense Land Supply Chain for the procurement of one Synchro Clamp, identified by NSN 5340-01-701-6496 and ABB Motors and Mechanical Inc part number HA6094A01SP. The requirement specifies a delivery timeframe of 20 days after order, with a required delivery date of September 1, 2026. The shipment is destined for the USS Bulkeley DDG 84 via vessel shipment, with FOB and inspection points set at the destination. The agreement mandates strict adherence to DLA technical and quality requirements, specifically citing RP001 for packaging and RQ011 for the removal of government identification from non-accepted supplies. Packaging must comply with MIL-STD-2073-1E and marking must follow MIL-STD-129. The contract allows for no quantity variance, meaning exactly one unit must be delivered.
Hardware Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333310
New
DIBBS
PAD, CUSHIONING
Solicitation # SPE7L1-26-T-06V2
This contract is for the procurement of one cushioning pad, identified by NSN 2590016900931 and part number 0322873-016 from Gemstar Manufacturing Inc. The order is managed by the Department of Defense Land Supply Chain under solicitation SPE7L1-26-T-06V2, with a required delivery date of September 1, 2026, and a delivery window of 10 days after the order. The item is to be delivered FOB Origin to the 115 BSB SSA at Fort Hood, Texas. The agreement mandates strict adherence to DLA technical and quality requirements, including RP001 for packaging and MIL-STD-129 for marking and labeling. Packaging must comply with ASTM D3951, and the use of Class I ozone-depleting chemicals is strictly prohibited. Inspection and acceptance will take place at the destination, and shipments must be sent via the fastest traceable means, excluding parcel post.
Commercial and Service Industry Machinery Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332994
New
DIBBS
CONTRACTOR FIRST ARTIC
Solicitation # SPE7L1-26-T-06X0
This contract is for the procurement of three machine gun cover assembly shroud units, identified as critical gun parts with unique requirements. The item is classified as a defense article subject to International Traffic in Arms Regulations and the Arms Export Control Act, requiring manufacturers or exporters to be registered with the Directorate of Defense Trade Controls. The solicitation is a total small business set-aside with a delivery timeline of 781 days after order. The agreement mandates strict quality and inspection protocols, including Contractor First Article Testing and potential Product Verification Testing. Inspections will be conducted by the DCMA QAR at the actual manufacturer's facility, and the identity of the manufacturer must be disclosed to the contracting officer. Additionally, the contract requires compliance with CMMC Level 2 certification, specific DLA packaging requirements, and prohibitions against the use of Class I ozone-depleting chemicals. Certificates of conformance are not authorized for this procurement.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 11 days
View Details