Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

SLING, AIRCRAFT MAIN

Active
SPE4A5-26-T-329GFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of two Aircraft Main Slings, identified by NSN 1730-01-029-4648 and part number 65720-70005-041, sourced from Sikorsky Aircraft Corporation, CAGE 78286. Delivery is required within 171 days of award, with shipment FOB origin and inspection and acceptance occurring at the destination. The quantity is strictly fixed at two units with no variance permitted. Packaging must comply with ASTM D3951 and MIL-STD-129, in alignment with DLA Packaging Requirements for Procurement, including palletization per RP001, while all technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements supersede any conflicting specifications. The item is designated as a critical application item and must adhere to the approved alternate sampling plan QAP 1201, which meets or exceeds ASQ H1331 or MIL-STD-1916 standards. Cybersecurity requirements mandate CMMC Level 2 self-assessment, and configuration changes require formal Engineering Change Proposal or variance requests. Item Unique Identification is not required per service customer directive, and all non-accepted supplies must have government identification removed. The delivery address is the DLA Distribution facility in New Cumberland, PA, with a need ship date of January 31, 2027, and an original required delivery date of August 19, 2027. The contract is governed by the DLA Master List revision in effect at the solicitation issue date, and all documentation must reflect compliance with ISO 9001:2015 quality requirements.

General Info

Two aircraft main slings, NSN 1730-01-029-4648, due January 31, 2027, per DLA specs, CMMC Level 2, ISO 9001:2015.

Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISIONView Agency

NAICS

336413 - Other Aircraft Parts and Auxiliary Equipment ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

SPE4A5-26-T-329G.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER OEM DIVISION
View Agency Profile
Office AddressUS
Contacts
JILLIAN BATES
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SLING,AIRCRAFT MAIN
SLING,AIRCRAFT MAIN
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RD002, COVERED DEFENSE INFORMATION APPLIES
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RQ042: Non-Tailored Higher-Level Quality Requirements (ISO 9001:2015) for Manufacturers and Non-Manufacturers
RT001: MEASURING AND TEST EQUIPMENT
SAMPLING:
SIKORSKY CORPORATION, CAGE 78286 ALTERNATE SAMPLING PLAN QAP 1201
PROCEDURE, "ATTRIBUTE SINGLE STATISTICAL ACCEPTANCE SAMPLING" IS
ACCEPTABLE. SIKORSKY CORPORATION'S ALTERNATE PLAN MUST MEET OR EXCEED
THE REQUIREMENTS OF ASQ H1331 OR MIL-STD-1916.
CRITICAL APPLICATION ITEM
SIKORSKY AIRCRAFT CORPORATION 78286 P/N 65720-70005-041
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE4A5-26-T-329G
SECTION B
PR: 7017740423 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017740423 0001 EA 2.000
NSN/MATERIAL:1730010294648
DELIVERY (IN DAYS):0171
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:01/31/2027 Original Required Delivery Date:08/19/2027
SPE4A5-26-T-329G NSN/Part Number: 1730-01-029-4648 Quantity: 2 EA Purchase Request: 7017740423QTY: 2 Delivery: 171 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336413
New
DIBBS
DRUM ASSEMBLY, WINCH
Solicitation # SPE4A7-26-T-615R
The contract is for the procurement of seven drum assemblies for winches with part number 9-14986 and NSN 1680-00-229-9128, under solicitation SPE4A7-26-T-615R. Delivery is required within 171 days of award, with performance to occur at Tinker AFB, Oklahoma. The solicitation, issued by the Department of Defense’s ASC Supplier Oper AE and AF Division, closed for responses on August 12, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. The item is subject to stringent configuration management, inspection at origin, and export control regulations under ITAR or EAR, restricting technical data access to contractors with approved JCP certification, completed DOD export training, and formal DLA authorization. Packaging must adhere to DLA standards, and non-accepted supplies must have all government identification removed. Physical marking of bare items and controlled handling of technical data are mandatory per DFARS 252.225-7048. All data sharing involving foreign persons, including U.S. subsidiaries and foreign nationals within the United States, is prohibited without prior government authorization.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
PULLEY, GROOVE
Solicitation # SPE7L1-26-T-915S
This contract specifies the procurement of a groove pulley identified by Part Number MS20219A1 and NSN 3020-00-541-3227, manufactured in compliance with MIL-DTL-7034F(1) and subject to the Qualified Products List QPL-7034. It is designated as a Navy Critical Safety Item, requiring strict adherence to all quality and safety standards, with any waivers or deviations needing explicit approval from the DSC Contracting Officer. The item must be marked per MIL-STD-129, including lot and serial numbers, contractor CAGE code, and manufacturer details, and packaged in accordance with MIL-STD-2073-1E and DLA packaging requirements. Zero non-conformance acceptance criteria apply under sampling methods such as MIL-STD-1916 or ASQ H1331, with critical attributes subject to the strictest verification levels. The use of Class I ozone-depleting chemicals is strictly prohibited, and substitute chemicals require prior approval. Non-destructive testing must be performed by accredited personnel, and all manufacturing processes must conform to SAE AS9100 quality management standards. The contract requires delivery of 132 units FOB origin within 152 days, with no tolerance for quantity variance, and inspection and acceptance to occur at the point of manufacture. The delivery destination is DLA Distribution San Diego, with specific packaging, marking, and palletization instructions defined under applicable military standards. The pricing is set at $132.00 per unit for a total value of $17,424.00. The solicitation was issued under SPE7L1-26-T-915S, with a response deadline of August 17, 2026, and a required delivery date of August 27, 2026. Defense information controls apply, and the item falls under a primary QPL or QML, meaning only qualified manufacturers may supply it. All technical and quality requirements referenced through R-numbers are governed by the DLA Master List, with revisions effective as of the solicitation or award date as applicable. Unit of issue is each, and transportation protocols follow DLA procedural notes C19 and C20.
LAND SUPPLY CHAIN

POSTED

about 16 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336413
New
DIBBS
PISTON, HYDRAULIC AC
Solicitation # SPE4A7-26-T-612C
The contract specifies the procurement of two hydraulic pistons for air conditioning systems under NSN 1650-01-517-7844 and part number 11463841 from RANDOLPH & BALDWIN, INC. Delivery is required FOB origin within 171 days, with no variance allowed in quantity, and inspection and acceptance are to occur at the manufacturer’s location. All items must comply with DLA’s Master List of Technical and Quality Requirements, which supersede all other standards including ASTM D3951, and packaging must follow MIL-STD-129 and RP001 guidelines. Sampling and inspection adhere to MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and critical, major, and minor attributes are assigned verification levels VII, IV, and II respectively. Quality management systems must meet ISO 9001:2015, and measuring equipment must meet RT001 standards. Physical identification and bare item marking are mandatory per RQ017. The contract references revision B of drawing NR 18876 dated 08/13/1997 and revision D dated 07/02/1985, with a newer revision dated 03/14/2024 governing the current requirement. The item must be delivered to the DLA Distribution facility in New Cumberland, PA, with the original required delivery date set for January 27, 2027, and an anticipated ship date of January 31, 2027. The contract was solicited under SPE4A7-26-T-612C, classified under NAICS 336413, with Jamiah Sutton as the primary point of contact.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
VIBRATION ISOLATOR,
Solicitation # SPE4A7-26-T-612K
The contract pertains to the procurement of 605 units of a vibration isolator, identified by NSN 1680-01-552-5433 and part number 51037 from TECH PRODUCTS CORP, under solicitation SPE4A7-26-T-612K. Delivery is required within 67 days of order placement, with FOB origin terms and inspection and acceptance occurring at the destination. The quantity is fixed with no tolerance for variance, and packaging must comply with ASTM D3951 while adhering strictly to MIL-STD-129 for marking and labeling, with palletization governed by DLA’s RP001 packaging requirements. The DLA Master List of Technical and Quality Requirements supersedes any conflicting standards. Sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and attributes are classified with verification levels VII, IV, and II for critical, major, and minor characteristics respectively. The item is designated as a critical application component and must be physically marked per RQ017. Cybersecurity compliance mandates a CMMC Level 2 self-assessment, and government identification must be removed from non-accepted supplies. The delivery address is DLA Distribution Jacksonville, and transportation guidelines reference DLAD Proc Notes C19 and C20. The original delivery requirement is set for December 12, 2026, with a needed ship date of July 15, 2026. The contract falls under NAICS code 336413 and is managed by the Department of Defense’s ASC Supplier Oper AE and AF Division.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
RELAY BOX ASSY
Solicitation # SPE4A5-26-T-329V
The contract pertains to the procurement of one Relay Box Assembly with part number 145E2032-5 and NSN 6615-01-244-9740, issued under solicitation SPE4A5-26-T-329V by the Department of Defense’s ASC Supplier Oper OEM Division. Delivery is required within 171 days from the contract award, with FOB origin terms and a strict zero variance in quantity. Inspection and acceptance occur at the manufacturer’s origin, in accordance with MIL-STD-1916 or a comparable zero-based sampling plan, with critical attributes requiring a verification level of VII or an AQL of 0.1. Non-conforming items must have government identification removed prior to return. The contractor must comply with DLA’s tailored quality requirements, packaging standards per MIL-STD-2073-1E, and marking requirements under MIL-STD-129, using code U for packaging and no special marking. Cybersecurity compliance is mandated at CMMC Level 2 via self-assessment. The item is not subject to Item Unique Identification. Delivery is to DLA Distribution San Joaquin at Tracy, California, with transportation governed by DLA procedural notes C19 and C20. The contract enforces the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation issue date.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
HEAD, HYDRAULIC MOTOR-P
Solicitation # SPE4A7-26-T-611G
The contract specifies the procurement of a hydraulic motor-pump head, identified by part number 4110820-1 and NSN 1650-01-293-6045, manufactured by Triumph Actuation Systems LLC with CAGE code 1SR57. A total of nine units are required, each subject to strict technical, quality, and packaging standards. The item is classified as a critical application item, necessitating compliance with MIL-STD-130 for Item Unique Identification (IUID) and adherence to DLA’s packaging requirements, including MIL-STD-2073-1E and MIL-STD-129 for marking and labeling. Inspection and acceptance occur at origin, with zero tolerance for quantity variance. Sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are assigned verification levels or AQLs based on their criticality. Technically referenced requirements are governed by the DLA Master List, with revisions controlled by the solicitiation award date for simplified acquisitions. Packaging must be palletized per DLA guidelines, and all items must be delivered FOB origin to the specified DLA distribution facility in New Cumberland, Pennsylvania. The delivery window is 613 days from contract award, with a required ship date of September 29, 2025. An additional line item for the First Article Test is included with a quantity of one unit, which is mandatory unless waived, and no separate price is to be quoted unless explicitly defined. The contract enforces configuration change management through Engineering Change Proposals and requires compliance with defense information handling protocols. All contractual obligations are tied to the solicitation number SPE4A7-26-T-611G, and failure to meet any referenced standard may result in rejection or non-award.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
FILLER, COUNTERSINK
Solicitation # SPE4A7-26-T-608S
The item specified is a FILLER, COUNTERSINK with NSN 1560-00-463-1728, with a quantity of 42 units required under purchase request 7017741479. The delivery must be completed within 171 days after order award. This procurement is governed by strict export control regulations under ITAR or EAR, meaning any technical data associated with the item is controlled and cannot be disclosed or transferred to foreign persons, including foreign nationals within the United States, without prior written authorization from the Department of State or Department of Commerce. The Defense Logistics Agency restricts access to this controlled technical data exclusively to contractors with an approved US/Canada Joint Certification Program certification, who have completed mandatory training on handling DOD export-controlled data and have received formal approval from DLA. DFARS 252.225-7048 applies to all data handling and dissemination requirements. The solicitation number is SPE4A7-26-T-608S, posted on August 4, 2026, with responses due by August 12, 2026, and the contract falls under NAICS code 336413. Performance is scheduled for New Cumberland, Pennsylvania, 17070-5002, with Jessica Gentry of the Department of Defense, ASC Supplier Oper AE and AF Division, listed as the primary point of contact.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
MAIN HARNESS ASSY, A
Solicitation # SPE4A5-26-T-329K
Offerors must comply with strict requirements prohibiting the provision of covered telecommunications equipment or services as defined by FAR 52.204-24 and DFARS 252.204-7016, and are required to affirmatively represent compliance with these restrictions. Domestic material sourcing is mandatory under the Berry Amendment, Buy American Act, and related clauses, with thresholds lowered to $150,000; non-domestic content must be disclosed upfront in the quote or via written notification to the designated point of contact. Small business joint ventures must submit specific representations under FAR provisions 52.212-3 and 52.219-1 to qualify for set-aside status. All offerors are strongly encouraged to provide quantity ranges rather than fixed figures due to the dynamic nature of demand and to avoid administrative delays in award decisions, though this flexibility does not apply to Auto IDC transactions. The use of additive manufacturing is prohibited unless explicitly approved by the contracting officer, and any proposal incorporating such items will be deemed ineligible. Effective within two months, contractors must register via DLA’s Account Management & Provisioning System to gain access to the Vendor Shipment Module, and those using VSM WebServices must implement updated schema changes to avoid loss of shipping capability. Offerors anticipating inability to respond by the closing date must submit a “No Bid” on DIBBS with an anticipated quote date or explanation to prevent assumptions of non-response and unnecessary requirement cancellations. The solicitation is for a Main Harness Assembly, NSN 1680-01-550-9330, quantity of 4 units, with a 59-day delivery requirement and response deadline of August 12, 2026. Fast Pay is not available for this procurement, and all submissions must be made through DIBBS.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
PLATE, STRUCTURAL, AIRCR
Solicitation # SPE4A7-26-T-611D
The contract pertains to the procurement of six structural aircraft plates, specifically identified as a seal assembly for fixed leading edge slats, with NSN 1560-01-281-6333 and purchase request number 7017739703. The item is subject to strict export control under either ITAR or EAR, meaning any transfer, including mere disclosure of technical data to foreign persons regardless of location, requires prior authorization from the Department of State or Commerce. DFARS 252.225-7048 governs the handling of this controlled data, and only DLA contractors with approved US/Canada Joint Certification Program certification, completed training on proper handling of DOD export-controlled technical data, and approved access through the DLA questionnaire are permitted to receive it. The solicitation, numbered SPE4A7-26-T-611D, was posted on August 4, 2026, with a response deadline of August 12, 2026, and is designated as a total small business set-aside under NAICS code 336413. Performance is required at Robins Air Force Base, Georgia, with a delivery window of 171 days after order. The contracting office is the Department of Defense’s ASC Supplier Oper AE and AF Division, with Mahlon Marcus as the primary point of contact. The procurement is managed under federal acquisition protocols and is accessible through the DIBBS system, with strict compliance required for handling sensitive technical data tied to national security.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
SUPPORT, STRUCTURAL COM
Solicitation # SPE4A7-26-T-611H
The contract pertains to the procurement of 23 units of a support structural component for aircraft, identified by NSN 1560-01-434-9026, with specific packaging requirements mandated by Qinetiq under cage code 5B2G7 for Aircraft Mats and Panels 1210300059. The purchase request number is 7017740258, and the delivery timeline is set at 171 days after contract award. The solicitation, identified as SPE4A7-26-T-611H, was posted on August 4, 2026, with responses due by August 12, 2026, under a federal procurement type and NAICS code 336413. The acquiring agency is the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense, with performance located in New Cumberland, Pennsylvania, ZIP 17070-5002. Primary point of contact is Shante'l Wyche, reachable at 804-279-4312, and all details are accessible via the DIBBS website under the specified solicitation link.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
PANEL, CONTROL, ELECT
Solicitation # SPE4A7-26-T-616C
The contract specifies the procurement of a PANEL CONTROL ELECTRICAL-ELECTRONIC EQUIPMENT with NSN 1680-01-535-8137 and part number 5442550-001, manufactured by SCI TECHNOLOGY, INC, under solicitation SPE4A7-26-T-616C. A total of three units are required at a unit price of $3.00, with delivery due in 171 days FOB origin, and inspection and acceptance to occur at the manufacturer’s location. The item is designated as a critical application item, and all technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede other standards like ASTM D3951. Packaging must comply with MIL-STD-129 and RP001 DLA Packaging Requirements, with no unit item identification mandated per DFARS 252.211-7003(c)(1)(i). Sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stipulated, and critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Cybersecurity compliance requires a CMMC Level 2 self-assessment, and configuration changes must be managed through formal engineering change proposals or variance requests. The contract is a total small business set-aside under NAICS 336413, with a response deadline of August 12, 2026, and delivery must be made to the designated warehouse in Tracy, California by January 31, 2027, with an original required delivery date of August 16, 2027. All transportation logistics are governed by DLA procedural notes C19 and C20.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
PANEL, STRUCTURAL, AI
Solicitation # SPE4A5-26-T-329Y
This contract pertains to the procurement of a structural panel labeled PANEL, STRUCTURAL, AI with part number 842-349545-13 and NSN 1560017293851, requiring delivery of one unit within five days FOB origin to Tinker Air Force Base, Oklahoma. The item is designated a Critical Application Item for The Boeing Company and must comply with stringent technical and quality requirements referenced from the DLA Master List, including adherence to MIL-STD-1916 or ASQ H1331 for sampling, with zero non-conformances expected unless otherwise stated. Quality assurance provisions mandate verification levels VII, IV, and II for critical, major, and minor attributes respectively, and compliance with DLA Packaging Requirements and MIL-STD-2073-1E for preservation and packing. The item must be marked according to MIL-STD-129 with no special marking codes applied, and palletization must follow DLA guidelines. A Certificate of Airworthiness and Conformance is required per FAA regulations, and while Unique Item Identification is not mandated, the contractor must retain supply chain traceability documentation as defined by DLAD Procurement Note C03. The contract enforces CMMC Level 2 self-assessment and incorporates cybersecurity and configuration change management protocols. Shipping must occur via traceable freight methods, explicitly prohibiting parcel post, with delivery to the designated DLA depot receiving address. The contract is governed by the revision of technical standards in effect on the solicitation issue date, with a response deadline of August 12, 2026, and an original required delivery date of June 18, 2026.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

Same awarding agency

NAICS: 332119
New
DIBBS
BUSHING, SLEEVE
Solicitation # SPE4A5-26-T-328Q
The contract is for the procurement of two BUSHING, SLEEVE items with NSN 5365-01-729-5733 and part number BACB28AP12Z059, issued under solicitation SPE4A5-26-T-328Q. Delivery is required within 127 days to the DLA Distribution facility in New Cumberland, Pennsylvania, with FOB origin terms and no variance allowed in quantity. The item is classified as a critical application component for Boeing and must comply with stringent technical and quality requirements referenced from the DLA Master List, including configuration change management, supply chain traceability per DLA Procurement Note C03, and FAA-specific provisions such as bare item marking and airworthiness certification. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, with preservation methods specified for dry conditioning and no special marking required. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances mandated unless otherwise stated, and attributes are assigned verification levels or AQLs based on criticality. The supplier must retain supply chain documentation and ensure all materials meet FAA airworthiness standards, as outlined in DFARS 252.211-7003, despite the absence of unique identification requirements. Transportation and shipping logistics are governed by DLA Procurement Notes C19 and C20, and all documentation must align with the Technical Data Package and associated Contract Data Requirements Lists. The item is subject to the DLA Packaging Requirements and must be delivered on or before December 18, 2026. The contract includes mandatory compliance with quality assurance provisions, and nonconforming supplies must be processed per RQ011 guidelines regarding removal of government identification. All technical specifications referenced are incorporated by link to the DLA eProcurement portal, and the procurement is conducted under the DoD-authorized unit of issue with a unit price and total price specified for the two-piece order.
Metal Crown, Closure, and Other Metal Stamping (except Automotive)

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332999
New
DIBBS
SHIM
Solicitation # SPE4A5-26-T-323P
The contract pertains to the procurement of five units of a specific shim identified by NSN 5365-01-493-6230 and part number 212-011-731-101, supplied by BELL TEXTRON INC with CAGE code 97499. Delivery is required FOB origin within 171 days of contract award, with no tolerance for quantity variance. Inspection and acceptance both occur at the destination facility. Packaging must comply with MIL-STD-2073-1E, including specified preservation methods, materials, and unit containers, while marking adheres strictly to MIL-STD-129 and DLA packaging requirements, with no special marking codes applied. Unit identification is not required per customer request under DFARS 252.211-7003(c)(1)(i). Acceptable sampling follows Sikorsky Corporation’s Alternate Sampling Plan QAP 1201, which must meet or exceed ASQ H1331 or MIL-STD-1916 standards. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, with the same address used for freight shipping. The required ship date is January 31, 2027, with an original delivery requirement of October 15, 2027. Technical and quality requirements referenced are governed by the DLA Master List, with applicable revisions determined by the solicitation or award date depending on acquisition scale. The contract is issued under solicitation SPE4A5-26-T-323P, with a unit price of $5.00 per piece for a total value of $25.00.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332618
New
DIBBS
WIRE ROPE ASSEMBLY,
Solicitation # SPE4A5-26-T-325N
The contract is for the procurement of 20 single-leg wire rope assemblies with NSN 4010-01-611-5048 and part number 6898106-107, supplied by Mazzeolla Lifting Technologies, Inc. Delivery is required FOB origin within 171 days, with no tolerance for quantity variance, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, and marking must adhere to MIL-STD-129 without any special codes. Palletization follows DLA standards, and preservation methods are strictly controlled with no mercury or mercury-containing compounds permitted in preservation, packaging, or marking materials. The item must meet all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with sampling governed by MIL-STD-1916 or ASQ H1331, applying zero non-conformances unless otherwise stipulated. Mercury is prohibited except in specified exempted applications such as batteries, fluorescent lights, and certain instruments, with portable mercury-containing devices requiring shockproof design and a secondary containment barrier. All deliveries must be sent to the DLA Distribution facility in New Cumberland, PA, and the contract is subject to transportation guidelines outlined in DLAD Proc Notes C19 and C20. The original required delivery date is May 30, 2027, with a needed ship date of January 31, 2027. The solicitation, issued under SPE4A5-26-T-325N, was posted August 4, 2026, with a response deadline of August 12, 2026, and falls under NAICS code 332618 as a federal procurement managed by the Department of Defense’s ASC Supplier Oper OEM Division.
Other Fabricated Wire Product Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
STAKE, GUY
Solicitation # SPE4A5-26-T-326K
STAKE, GUY is a procurement contract issued by the Department of Defense through the ASC SUPPLIER OPER OEM DIVISION under solicitation number SPE4A5-26-T-326K, requiring delivery of 67 units of item NSN 4030-01-710-7034 with a unit price of $67.00, totaling $4,489. The contract mandates strict adherence to DLA’s Master List of Technical and Quality Requirements, which override any conflicting standards such as ASTM D3951. Packaging must comply with MIL-STD-129 and RP001 DLA Packaging Requirements, with all items palletized and labeled according to specified guidelines. Inspection and acceptance occur at the destination, with no variance allowed in quantity. Delivery is due within 171 days of award, with an original required delivery date of March 30, 2027, and a needed ship date of January 31, 2027. The item must be delivered FOB origin to the receiving warehouse in Tracy, California, with transportation governed by DLAD PROC NOTES C19 and C20. The contract enforces a zero-defect sampling standard, requiring compliance with MIL-STD-1916 or ASQ H1331, where critical, major, and minor attributes must be verified at levels VII, IV, and II or with AQLs of 0.1, 1.0, and 4.0 respectively, and any unspecified attributes are treated as major. Acceptance requires zero non-conformances unless otherwise directed. Cybersecurity requirements mandate a CMMC Level 2 Self-Assessment, and all government identification must be removed from non-accepted supplies. The seller is subject to all DLA directives, including unit of issue specifications and packaging standards, with no exceptions permitted. Contract performance is monitored via the point of contact Hien-Van Trinh, and all documentation must reference the authorized DLA unit of issue as defined in official DoD guidelines.
Hardware Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334419
New
DIBBS
STAND, COMPRESSED GA
Solicitation # SPE4A5-26-T-325J
The contract is for the procurement of 18 units of a commercial off-the-shelf stand designed for compressed gas cylinders, identified by part number G-600 and NSN 4920-01-587-5435, sourced from First Safety Corporation Inc. The item must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which take precedence over ASTM D3951 packaging standards. Packaging and labeling must follow MIL-STD-129, and palletization must adhere to DLA Packaging Requirements for Procurement (RP001). Delivery is FOB origin with a 171-day lead time, and inspection and acceptance occur at the destination. The quantity is fixed with no variance allowed. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, with the required ship date set for January 31, 2027, and the original delivery date as July 24, 2027. Each unit is priced at $18.00, totaling $324.00 for the order, under contract SPE4A5-26-T-325J. Transportation details are governed by DLAD Proc Notes C19 and C20, and the unit of issue is each (EA). All government identification must be removed from non-accepted supplies, and compliance with the DLA Master List controls the applicable revision level based on the solicitation or award date.
Other Electronic Component Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334513
New
DIBBS
THERMOMETER, SELF-IN
Solicitation # SPE4A5-26-T-325E
The contract concerns the procurement of six self-injecting thermometers with NSN 6685-01-643-7750 under solicitation SPE4A5-26-T-325E, issued by the Department of Defense’s ASC SUPPLIER OPER OEM DIVISION. Delivery is required FOB origin within 171 days of award, with a firm delivery deadline of January 31, 2027, and no variance permitted in quantity. All units must comply with DLA’s technical and quality requirements referenced in the DLA Master List, including sampling protocols aligned with MIL-STD-1916 or ASQ H1331, where critical, major, and minor attributes must be verified at levels VII, IV, and II or corresponding AQLs of 0.1, 1.0, and 4.0. Zero non-conformances are required in sampled lots unless otherwise specified. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129 with the special marking code 05 indicating a delicate instrument, and palletization must conform to DLA packaging standards. The product is labeled as RTEMP INSTRUMENT CORPORATION P/N B4T6QPX2256X-C3TSVB and requires no government identification removal. The shipment must be sent to the specified receiving warehouse in Tracy, California, following DLA transportation notes C19 and C20, and packaging must comply with hazardous materials standards where applicable. The unit price is $6.00 per unit, totaling $36.00, with all terms governing inspection and acceptance occurring at the destination.
Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334512
New
DIBBS
CONTRACTOR FIRST ARTIC
Solicitation # SPE4A5-26-T-329T
The contract specifies the procurement of a dial indicating pressure gauge identified by NSN 6685012957435 and part number SG4MC10KPWRONAG, with a requirement for 20 units delivered FOB origin within 291 days. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation issue date controlling compliance. The item is designated as a critical application with specific identification and marking requirements per MIL-STD-129 and the special marking code 05 for delicate instrument. Packaging must conform to MIL-STD-2073-1E with defined packaging methods, materials, and unit container codes, and palletization must adhere to DLA packaging rules. Mercury and mercury-containing compounds are strictly prohibited unless functional use is explicitly exempted and meets safety standards outlined in NAVSEA 5100-003D, requiring secondary containment for portable devices. Inspection and acceptance occur at the origin, and government identification must be removed from non-accepted items. Item Unique Identification is not required per customer request. Measuring and test equipment used must meet RT001 standards, and the contract references the QAP-106 and MIL-G-18997E technical documentation. The purchase request number is 7017742652, the solicitation number is SPE4A5-26-T-329T, and point of contact is Aprile Corley of the Department of Defense’s ASC Supplier Oper OEM Division.
Automatic Environmental Control Manufacturing for Residential, Commercial, and Appliance Use

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334519
New
DIBBS
ADAPTER, GAGE
Solicitation # SPE4A5-26-T-321C
The contract pertains to the procurement of an Adapter, Gage with NSN 6685-00-274-5533 and part number 421371-1, manufactured by Enerpac Tool Group Corp under specification SPE4A5-26-T-321C. Nine units are required at a unit price of $9.00, with delivery due in 171 days FOB origin to DLA Distribution San Diego. The item is classified as a critical application item requiring physical identification and compliance with MIL-STD-129 marking standards. Packaging must adhere to MIL-STD-2073-1E, with specific preservation methods and unit containment codes, and palletization must meet DLA’s packaging requirements. Inspection and acceptance occur at the destination, with zero tolerance for non-conformances under sampling plans specified by MIL-STD-1916 or equivalent zero-based systems, unless otherwise designated. Attributes are assigned verification levels or AQLs per defined standards, and unspecied attributes are treated as major. Mercury and mercury-containing compounds are strictly prohibited except in exempted functional components such as batteries or instrument sensors, which must include secondary containment as per NAVSEA 5100-003D. Configuration changes require formal engineering change proposals or variance requests, and government identification must be removed from non-accepted supplies. Covered defense information provisions apply, and the contract explicitly excludes Item Unique Identification per DFARS 252.211-7003(c)(1)(i). The solicitation opened on August 4, 2026, with responses due August 12, 2026, and performance is directed under DLA’s authorized unit of issue system with full alignment to technical and quality requirements referenced from the DLA Master List.
Other Measuring and Controlling Device Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, PLATE
Solicitation # SPE4A5-26-T-328K
The contract pertains to the procurement of 24 plain plate nuts with NSN 5310-00-241-0092 under solicitation SPE4A5-26-T-328K, issued by the Department of Defense’s ASC SUPPLIER OPER OEM DIVISION. Delivery is required within 115 days after award, with responses due by August 12, 2026. The item has no shelf life requirement and does not require Unique Item Identification as specified by the Service customer, in accordance with DFARS 252.211-7003(c)(1)(i). Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless superseded by an amendment. Packaging must comply with DLA standards, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. Inspection and acceptance occur at origin, and government identification must be removed from non-accepted supplies. Bare items must be physically marked according to RQ017, and measuring and test equipment used must meet specified standards. Sampling follows MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Unspecified attributes are treated as major. Zero non-conformances are required unless otherwise stated. Data supporting this procurement is deemed proprietary or insufficient for competitive bidding. The place of performance is Cherry Point, North Carolina, 28533-5040, with Jaelyn Buford listed as the primary point of contact.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334513
New
DIBBS
THERMOMETER, SELF-INDIC
Solicitation # SPE4A5-26-T-330M
The contract specifies the procurement of 36 digital, self-indicating thermometers, identified by the part number FLUKE 62 MAX and NSN 6685-01-613-2829, as a commercial off-the-shelf item. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with compliance determined by the revision in effect on the solicitation issue date or award date, depending on the acquisition size. The item must meet stringent packaging standards per MIL-STD-2073-1E and marking requirements under MIL-STD-129, including a special marking code for “Delicate instrument.” Preservation methods prohibit mercury or mercury compounds in packaging and require dry, controlled environments. Sampling procedures must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and critical attributes are assigned the highest verification levels. Delivery is FOB origin with a strict 36-unit quantity allowance with no variance permitted, and the item must be delivered to a designated DLA warehouse in Tracy, California, by January 31, 2027, after an initial required delivery date of November 25, 2026. Transportation and shipping instructions align with applicable DLA procedural notes, and the contract is administered under solicitation SPE4A5-26-T-330M with a unit price of $36.00 per unit.
Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334419
New
DIBBS
BATTERY CHARGER, AIR
Solicitation # SPE4A5-26-T-326V
The contract is for the procurement of six battery chargers, air model, identified by NSN 4920-01-498-2543 and part numbers 4159-MIL and CA 1550 MIL from Lamar Technologies LLC, with delivery required within 171 days under a total small business set-aside. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951, and packaging must comply with MIL-STD-129 and DLA Packaging Requirements, including palletization per RP001. Sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are classified with verification levels VII, IV, and II corresponding to AQLs of 0.1, 1.0, and 4.0 respectively. The item is designated as a critical application requiring strict configuration control and physical identification, and non-approved sources must obtain source approval from the design control activity with technical data packages submitted with their offer. Delivery is FOB origin to the DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at destination. The purchase request number is 7017739882, unit of issue is EA, quantity is fixed at six units with zero variance allowed, and the required delivery date is January 31, 2027, with an original target of January 26, 2027. All markings, labeling, and documentation must adhere to applicable DoD and DLA directives, and transportation follows DLAD procedural notes C19 and C20.
Other Electronic Component Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details