This Solicitation opportunity from Florida was posted on September 12, 2025. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Snapper Creek Service Plaza General Improvements Asphalt, Concrete, Drainage, and Site Upgrades (Miami-Dade County)

Closed

E8W42State & Local

Submission Closed11/18/2025, 12:00:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 423860

New

SLED

Truck & Trailer Tie Down Equipment

Solicitation # B2728305

Solicitation B2728305 is a fixed-price procurement for Truck and Trailer Tie Down Equipment issued by the City of Philadelphia's Parks and Recreation department. The contract will be awarded to the lowest, responsible, and responsive seller who meets all technical and administrative requirements. The aggregate value of purchase orders issued under this contract shall be less than 45,000 dollars. All products must be delivered FOB Destination Point, and sellers are required to provide the exact items specified unless an acceptable alternate of equal quality and performance is approved by the City. Submission of quotes must be completed electronically via the PHLContracts portal by the December 10, 2026, deadline. A mandatory Consent and Authorization Agreement must be on file for a quote to be considered, while an LGBTQ Applicant Opportunity Data Form may be submitted optionally. Awarded vendors must enroll in the city's electronic deposit system for payment and maintain specific insurance coverages, including 500,000 dollars in general liability and 300,000 dollars in automobile liability, unless providing equipment solely via common carrier. The contract is governed by the laws of the Commonwealth of Pennsylvania and the courts of Philadelphia County.

POSTED

DEADLINE

NRP,SON LNCH DIST V — 1680016443714 — SPRPA127QWA20

Solicitation # SPRPA127QWA20

Solicitation SPRPA127QWA20 is an emergency acquisition issued by the Department of the Navy via the DLA Aviation office in Philadelphia for the procurement of NSN 7RH 1680-01-644-3714 CB, described as NRP, SON LNH DIST V. The requirement specifies a delivery timeline of 90 days with shipping terms set as FOB Destination. Inspection and acceptance will occur at the origin. The government intends to make a single award to a technically acceptable offeror, with the evaluation prioritizing past performance over price. Risk assessments may be conducted using the DoD Supplier Performance Risk System to evaluate item, price, and supplier risks. The contract mandates strict adherence to military packaging and marking standards, including MIL-STD-2073-1 for system stock and MIL-STD-129 for labeling. Specific requirements are outlined for electrostatic discharge protection per ANSI/ESD S20.20-2021 and shelf-life markings, requiring at least 85 percent of the Navy shelf-life to remain upon receipt. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment requests. Compliance with the Buy American Act and safeguarding covered defense information under DFARS 252.204-7012 is required. Offerors must provide current catalogs or price lists and validate their status in the System for Award Management.

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

PROPELLER SHAFT, NONVEH

Solicitation # SPE7L0-27-Q-0028

Solicitation SPE7L0-27-Q-0028 is a request for the procurement of eight nonvehicular propeller shafts, identified by NSN 3040-01-625-0751 and Yamaha Motor Corporation P/N 6CB-45611-00-00. Issued by the DLA Weapons Support Land Supply Chain, the requirement specifies a delivery date of February 6, 2026, with a delivery window of 60 days after order. The items are to be shipped FOB Destination to the Royal Jordanian Engineering Corps in Zarqa, Jordan, with Serra International Inc serving as the freight forwarder. Inspection and acceptance will occur at the point of origin. The contract mandates strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with palletization following DLA requirement RP001. Payment must be processed electronically via the Wide Area WorkFlow system. This is not a small business set-aside and includes various federal and defense regulations, including Buy American preferences, cybersecurity compliance under DFARS 252.204-7012, and prohibitions regarding Chinese military companies. Offerors must submit quotations using Standard Form 18 by the specified deadline, with the government evaluating the potential use of reconditioned or surplus property.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Marine Safety Gear and Equipment - RFI

Solicitation # 04326 - RFI #2

The Washington Department of Enterprise Services is requesting feedback through RFI #2 regarding the development of Marine Safety Gear and Equipment. This solicitation seeks industry input on safety gear requirements, current market availability, distribution methods, and overall coverage to inform the agency's planning and procurement strategies. Interested parties must submit their responses by November 1, 2026. The scope of performance covers multiple counties within the state of Washington. Primary inquiries and submissions should be directed to David Hallock at the Department of Enterprise Services.

Enterprise Services , Department. of

POSTED

DEADLINE

RFQ-171-270000000015-2 | 472/23129.KMM; Woodland C.F. - Site Mechanical Underground

Solicitation # 472/23129

Solicitation 472/23129.KMM is a project managed by the Michigan Department of Technology, Management and Budget for site mechanical underground work at the Woodland Correctional Facility in Whitmore Lake, Michigan. The scope of work involves updates to the sanitary sewer and water main systems, requiring contractors to handle utility location, hydro excavation, dewatering, and project phasing. Bidders must adhere to specific technical specifications and obtain necessary permits from agencies such as DLARA, MDOT, and EGLE. Due to the secure nature of the Michigan Department of Corrections facility, all personnel requiring access to the secure perimeter must undergo a background check via a LEIN request. The bidding process requires submissions through the SIGMA VSS portal, with a final response deadline of November 18, 2026. Key requirements include proof of State Project Registration and attendance at a mandatory site walk-through. The project incorporates specific guidelines from a geotechnical data report regarding soil conditions and trenchless crossings for water mains. Additionally, the contract includes a material allowance in the bid schedule and mandates compliance with MDOC utility and security shut down standards, as well as responsibilities for restoring areas disturbed during previous construction phases.

POSTED

DEADLINE

FUEL INJECTOR KIT 8000 HR SIEMENS CHARGER LOCOMOTIVE

Solicitation # 2139511

Solicitation 2139511 is a rate order issued by the MTA Metro-North Railroad for the procurement of a Fuel Injector Kit 8000 HR Siemens Charger Locomotive. This procurement falls under the category of transportation commodities and is intended for performance state-wide within New York. The solicitation was posted on October 15, 2026, with a response deadline of November 5, 2026, at 3:00 PM. The primary point of contact for this requirement is TAA Harrypaul, a Procurement Specialist II. Interested parties can find additional details and contact information via the MTA Vendor Portal. There are currently no specific goals established for Service-Disabled Veteran-Owned Businesses, Minority/Women Business Enterprises, or Disadvantaged Business Enterprises, as all such goals are set at 0.00 percent.

MTA - Metro-north Railroad

POSTED

DEADLINE

Supply and Deliver Lighting Equipment and Accessories for PATH, Manufactured by Luminator Mass Transit, LLC – Two (2) Year Requirements Contract

Solicitation # 2139889

The Port Authority of New York and New Jersey is soliciting bids for a two-year requirements contract, identified by solicitation number 6000003511 and CR number 2139889. The scope of work involves the supply and delivery of lighting equipment and accessories for PATH, specifically those manufactured by Luminator Mass Transit, LLC. These deliverables fall under NIGP Code 55900 for mass transportation rail vehicle parts and accessories. The contract is administered by the Procurement Operations division located at 150 Greenwich Street in New York. Bids must be submitted electronically via Euna by October 28, 2026, at 11:00 AM. In accordance with Title VI of the Civil Rights Act of 1964, the Port Authority ensures full and fair opportunity for all businesses regardless of race, color, national origin, age, or disability. No business enterprises have been awarded an identical or substantially similar procurement contract within the past five years. For further assistance or documentation, interested parties may contact the Procurement Support Specialist at [email hidden] or [phone hidden].

The Port Authority of New York and New Jersey

POSTED

DEADLINE

Locomotive Overhaul Kit

Solicitation # 195772A

Metra is soliciting bids under solicitation number 195772A for the procurement of Locomotive Overhaul Kits to support the in-house rehabilitation and modernization of F40PH-3 locomotives. This indefinite quantity contract is established for a five year period with a total value not to exceed 19 million dollars. The award will be granted to the lowest responsive and responsible bidder based on gross individual unit prices or the gross bid total. Key requirements for responsiveness include bidding on all items, providing a signed contract signature page, acknowledging all addenda, and submitting a correctly executed Buy America Certificate for FTA funded procurements exceeding 150,000 dollars. The scope includes the provision of materials and overhaul kits delivered F.O.B. Destination within the Chicagoland Six County Area, specifically to the 47th Street Maintenance Facility. Pricing must be all inclusive of packaging, transport, handling, and remanufactured costs. The contract mandates a one year warranty period and requires compliance with various federal and state regulations, including 49 CFR Part 26 for Disadvantaged Business Enterprises, the Americans with Disabilities Act, and FTA Circular 4220.1G. Bidders must provide notarized non collusion affidavits and certifications regarding debarment and suspension. The successful contractor is responsible for performing all inspection and acceptance testing of items prior to delivery.

POSTED

DEADLINE

Amtrak Indianapolis Distribution Center Locomotive/Passenger Car Material

Solicitation # 2027-009

Solicitation 2027-009 is a federal sale of surplus locomotive and passenger car materials located at the Amtrak Indianapolis Distribution Center. This is a competitive invitation for bids where materials, including various aisle and vestibule lights, door assemblies, valve stations, and sensor heads, are sold on an as is-where is basis. Bidders must submit firm fixed price quotes on a per-line basis using the provided bid spreadsheet, as total sum bids will not be accepted. The response deadline is October 28, 2026, with submissions sent electronically to the Asset Management Team. The successful awardee is responsible for all costs and equipment associated with the safe removal of materials and debris within 45 to 90 calendar days from the Notice to Proceed. Key requirements include providing proof of automobile liability insurance of at least 1 million dollars per occurrence and adhering to strict site safety protocols, including the use of required personal protective equipment. Failure to remove materials within the specified period may result in a daily storage fee of 250 dollars. The contract is governed by the laws of the District of Columbia and the Amtrak Sales Order Contract General Provisions rather than standard FAR clauses.

POSTED

DEADLINE

Multiple Victoria-Class Spares - Anti- Flash Device, Cooler,Fluid,Industrial, Cartridge,Check Valve, Parts Kit, Fluid Pressure Filter, Valve, Safety Relief

Solicitation # W8482-275589/A

The Department of National Defence is soliciting proposals under solicitation number W8482-275589/A for the procurement of various Victoria-Class spares. The required items include anti-flash devices, industrial fluid coolers, check valve cartridges, fluid pressure filter parts kits, and safety relief valves. These components are to be delivered in equal quantities to CFB Esquimalt and CFB Halifax. All goods must be new and delivered Free Carrier (FCA) per Incoterms 2020. Bids are due by November 9, 2026, at 14:00 EST, with the Department of National Defence reserving the right to negotiate delivery dates around March 31, 2027. The contract mandates strict quality and packaging standards, including specific marking requirements for manufacturer names and part numbers, and the use of PDF417 bar code symbols for unique identification. Certain items require permanent stamping or etching and must adhere to specific shelf-life requirements, ensuring at least 75 percent of the authorized shelf life remains upon delivery. Bidders proposing equivalent or substitute products must provide comprehensive technical specifications and compliance statements to prove full interchangeability. Payment for undisputed invoices will be issued within 30 days of receipt.

Department of National Defence

POSTED

DEADLINE

Aviation Maintenance Parts IDIQThe Department of State, through the Bureau of International Narcotics and Law Enforcement Affairs, is establishing an Indefinite Delivery, Indefinite Quantity contract for aviation maintenance parts. This initiative is designed to create a more efficient and cost-effective sourcing mechanism for the procurement of aviation parts and related services, with the primary place of performance located in Bogota. Classified under NAICS code 423860, this forecast was posted on September 1, 2026. Jamillah Timmons serves as the primary point of contact, with Tyler Sinclair acting as the Small Business Specialist for the requirement.

BUREAU OF INTERNATIONAL NARCOTICS AND LAW ENFORCEMENT AFFAIRS

POSTED

DEADLINE

Aviation Maintenance Parts IDIQThe Aviation Maintenance Parts IDIQ is a forecasted contract initiated by the Department of State to establish an Indefinite Delivery, Indefinite Quantity vehicle for aviation parts and services. The primary objective of this procurement is to create a more efficient sourcing mechanism that provides faster and more cost-effective access to essential aviation components. Classified under NAICS code 423860, the contract is designed to streamline the acquisition process for maintenance requirements, ensuring that necessary parts are available to support aviation operations without the delays associated with traditional procurement methods. This forecast was posted on August 20, 2026, and serves as an advance notice for potential industry participants. Interested parties can coordinate with designated points of contact, including Jamillah Timmons and Small Business Specialist Tyler Sinclair, for further inquiries. While specific set-aside details are not currently defined, the initiative represents a strategic effort by the Department of State to optimize its supply chain for aviation maintenance through a flexible and responsive contracting framework.

State, Department Of

POSTED

2 months ago

DEADLINE

N/A

AI Contract Overview

This contract involves comprehensive general improvements at the Snapper Creek Service Plaza located at milepost 19 in Miami-Dade County, Florida. The project requires the contractor to provide all necessary labor, materials, equipment, and incidentals to carry out a range of construction activities, including asphalt pavement milling, resurfacing, widening, and reconstruction, as well as the installation of new asphalt pavement. Additionally, the scope includes constructing concrete pavement in truck parking areas, removing existing concrete picnic tables, implementing drainage improvements, replacing guardrails, and reconstructing sidewalks. Upgrades to lighting, signage, and pavement markings are also part of the project. The contract spans 350 days, with an initial 10-day period for contract execution, and allows for flexible start times within a 120-day window. The project does not require a pre-bid conference, but contractors must be prequalified to participate. The solicitation was posted on September 12, 2025, with a deadline for responses on November 18, 2025. The contract value is estimated to be between 5 and 10 million dollars, and it is managed by the Florida Department of Transportation.

General Info

Agency

Florida Department of Transportation

NAICS

423860 - Transportation Equipment and Supplies (except Motor Vehicle) Merchant Wholesalers

Place of Performance

FL, USA

Set-Aside

NONE

Documents

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedSep 12

Solicitation

Response DeadlineNov 18

Deadline has passed

Submission Closed

11/18/2025, 12:00:00 AM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyFlorida Department of Transportation

ContactsNo contacts available

OfficeN/A

Organization / AgencyFlorida Department of Transportation

Office AddressN/A

ContactsNo contact information available

Full Description

LETTING LOCATION: TPK HDQTRS POSTING DATES: 12/02/2025 and 12/16/2025 CONTRACT DAYS: 350 CONTRACT EXECUTION DAYS: 10 SPECIAL START DATE: N/A ACQUIS./FLEXIBLE START TIME: 120 Work consists of providing all labor, materials, equipment and incidentals necessary for general improvements at Snapper Creek Service Plaza [MP 19] in Miami-Dade County, Florida. The work includes, but is not limited to: asphalt pavement milling and resurfacing, widening, reconstruction, and placement of new asphalt pavement; construction of plain cement concrete pavement in truck parking areas; removal of concrete picnic tables; miscellaneous drainage improvements; guardrail replacement; sidewalk installation and reconstruction; tree protection and removal; and upgrades to lighting, signing and pavement markings. No Pre-Bid Conference. Contractor must be prequalified.