Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 14 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Soils Engineer / Geotechnical Consultant

Active

State & Local

Response Deadline11/03/2026, 11:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract opportunity is for a Soils Engineer or Geotechnical Consultant to provide testing and certification of fill materials for prime contractors working on City of Fresno demolition projects. The primary scope of work involves testing imported fill material used in septic tank backfilling to verify that materials achieve a minimum of 90 percent maximum dry density. The selected consultant will utilize specialized soil compaction equipment, such as nuclear gauges, and is responsible for delivering detailed compaction test reports and density certifications. Qualified candidates must hold a valid California Professional Engineer license to perform these services in Fresno, California. The solicitation was posted on October 7, 2026, with a response deadline of November 3, 2026. This project falls under NAICS code 541380 and is focused on ensuring structural integrity and regulatory compliance for municipal demolition and backfilling activities.

General Info

Licensed CA Soils Engineer needed for fill testing and certification in Fresno, California.

Agency

California → City of Fresno

NAICS

541380 - Testing Laboratories and Services

Place of Performance

Fresno, CA, 93722, USA

Set-Aside

NONE

Documents

This scope was carved out of 12700204.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Abatement Of Lead Based Paint At 5223 W Ashlan Ave & Demolish And Dispose Residential Structures At 5245 & 5223 W Ashlan Ave, Fresno Ca 93722

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 7

subcontract

Response DeadlineNov 3

Submission deadline

Response Deadline

11/03/2026, 11:00:00 PM UTCin 26 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyCalifornia → City of Fresno

ContactsNo contacts available

OfficeN/A

Organization / AgencyCalifornia → City of Fresno

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs testing and certification of fill materials for prime contractors on City of Fresno demolition projects. Tests imported fill material used in septic tank backfilling to ensure materials meet a 90 percent maximum dry density. Utilizes soil compaction testing equipment such as nuclear gauges. Requires California Professional Engineer (PE) license. Delivers compaction test reports and density certifications.

Similar Contracts

Same NAICS industry code

Joliet Job Corps-Request for Quote Asbestos Testing & Abatement

Solicitation # Joliet JCC Asbestos Testing & Abatement

Management & Training Corporation is seeking quotes for a fee-for-service subcontract to provide asbestos testing and abatement services at the Joliet Job Corps Center in Joliet, Illinois. The scope of work includes sampling and laboratory analysis of ceiling tiles in the Administration Academic Building and Welcome Center, as well as testing and potential removal of asbestos-containing material floor tiles in the Gymnasium (approximately 600 square feet) and the Warehouse and Storage areas (approximately 3,600 square feet combined). All activities must be performed by licensed professionals using accredited laboratories and must comply with federal, State of Illinois, OSHA, and EPA regulations. Key deliverables include a sampling plan, waste shipment records, disposal manifests, and a final project completion report. This opportunity is set aside for small businesses, including VOSB, SDVOSB, WOSB, and HUBZone certified firms. Interested offerors must submit a bid sheet, a completed supplier packet containing a W-9 and self-certification form, proof of insurance, and three references for similar projects by October 21, 2026, at 3:00 PM CT. Award will be based on best value as determined by MTC. The contract is subject to Service Contract Labor Standards, specifically Wage Determination SCA 2015-5019 Rev 31, and includes various FAR clauses regarding small business utilization, labor standards, and information security. Invoicing is to be submitted on a weekly or bi-weekly basis.

Joliet Job Corps

POSTED

about 7 hours ago

DEADLINE

RFP #26-1027 - SPECIAL INSPECTIONS AND CONSTRUCTION MATERIAL TESTING SERVICES (BHHES)

Solicitation # PE-62910-NONST-2027-000000096

The Clarke County Board of Education is soliciting competitive sealed proposals under RFP 26-1027 for special inspections and construction material testing services for the Bettye Henderson Holston Elementary School project in Georgia. This solicitation, identified by event number PE-62910-NONST-2027-000000096, was posted on October 7, 2026. The selected contractor will be responsible for providing specialized testing and inspection services as outlined in the Request for Proposal and Bid Specifications. Interested parties must submit their proposals to the Clarke County School District SPLOST Office at 145 Paradise Blvd., Athens, Georgia, 30607, no later than 11:00 AM on October 27, 2026. Bidding documents are available via email from Troy Bassett. Once submitted, bids cannot be withdrawn for sixty days. The school district maintains the right to reject any submittals and waive technicalities or informalities during the selection process.

Clarke County Board of Education

POSTED

about 16 hours ago

DEADLINE

Soil Density Testing and ReportingThis subcontract for Soil Density Testing and Reporting involves performing compaction testing on backfill materials for prime contractors working on Hernando County Utilities Department projects. The scope of work specifically requires conducting density tests for roadway open cut backfill using nuclear density gauges, with a minimum requirement of one test per six-inch lift per travel lane. The selected provider must be a certified geotechnical testing laboratory or technician capable of providing comprehensive laboratory services and formal reporting. The primary deliverable is the submission of passing density test reports. Interested parties should note the response deadline of November 9, 2026.

POSTED

about 16 hours ago

DEADLINE

in about 1 month

First Article Testing and Inspection ServicesThis subcontract for First Article Testing and Inspection Services supports the Department of Defense through the DLA Weapons Support ASC Supplier Oper AE and AF Div. The selected contractor will perform First Article Testing for prime contractors, specifically conducting validation testing on one unit of NSN 1670-01-441-8630. This process requires the use of precision measurement equipment and CMM, with close coordination alongside Government Quality Assurance Representatives. The project is based in Tracy, California, under NAICS code 541380. A primary deliverable is a comprehensive First Article Test Report, which must be submitted within 60 days. The solicitation was posted on October 7, 2026, with a response deadline of October 15, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 18 hours ago

DEADLINE

First Article Testing (FAT) and Validation ServicesThis subcontract for First Article Testing and Validation Services supports prime contractors on DLA Weapons Support ASC projects. The primary objective is to validate aircraft access covers by verifying material properties, finish, and dimensions against the Technical Data Package using certified metrology equipment. The final deliverable for this effort is a completed First Article Test Certification report. The work is performed in San Diego, California, under NAICS code 541380 for the Department of Defense. Due to the handling of ITAR-controlled technical data, the contractor must maintain JCP certification. Interested parties should note the response deadline of October 15, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 18 hours ago

DEADLINE

RF Cable Testing and Validation Services

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

Aerospace Quality Assurance & Inspection ServicesThis subcontract for Aerospace Quality Assurance and Inspection Services supports prime contractors on DLA Weapons Support ASC projects at Robins Air Force Base. The selected provider will perform independent inspection and verification tasks, executing sampling plans according to MIL-STD-1916 or ASQ H1331 standards with zero-based sampling for critical, major, and minor attributes. All work must be performed using NIST-calibrated Measuring and Test Equipment in accordance with requirement RT001, and the contractor is required to deliver detailed inspection reports and certifications of conformance. The opportunity is categorized under NAICS code 541380 and is issued by the Department of Defense. A critical security requirement for this engagement is CMMC Level 2 compliance. Interested parties should note the response deadline of October 15, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 18 hours ago

DEADLINE

Piston Tube Assembly Testing and Quality ValidationThis subcontract for Piston Tube Assembly Testing and Quality Validation supports Navsup Weapon Systems Support Philadelphia projects. The selected provider will be responsible for performing final acceptance testing, quality validation, and performance tests for prime contractors, including conducting re-test procedures following repairs and generating all necessary acceptance test data. To qualify, the contractor must hold ISO 9001 or SAE AS9100 certification and coordinate closely with Government Source Inspection. Key deliverables include certified test reports and signed-off RFI status. The response deadline for this opportunity is November 6, 2026.

Navsup Weapon Systems Support

POSTED

about 23 hours ago

DEADLINE

Load Cell and Crosshead Verification ServicesThis subcontract for the NASA Shared Services Center involves providing high-precision verification services for force, speed, and displacement to support prime contractors. The scope of work focuses on enhanced load cell force verification ranging from 0 to 300 kN in both tension and compression, as well as the verification of crosshead speed and displacement. All activities must be performed using precision calibration equipment in strict accordance with ASTM E2658 and ASTM E2309 standards. The selected provider is responsible for delivering detailed calibration and verification reports that certify full compliance with these industry standards.

NASA Shared Services Center

POSTED

about 23 hours ago

DEADLINE

in about 22 hours

NDI and First Article Qualification TestingThis subcontract involves providing non-destructive inspection and qualification testing for F100 injector assemblies on DLA Aviation projects. The selected contractor will perform inspections according to LPF-QAR-003 and specific technical drawings, utilizing X-ray, Magnetic Particle, or Dye Penetrant equipment. The scope of work includes conducting destructive testing on First Article parts and delivering certified Test and Inspection Reports in compliance with DI-NDT1-80809B/T. To be eligible, the contractor must hold OEM or CEA facility certification. This opportunity is managed by the Department of Defense through DLA Aviation at Oklahoma City under NAICS code 541380. The response deadline for this requirement is November 6, 2026.

Ok DLA Aviation At Oklahoma City

POSTED

about 23 hours ago

DEADLINE

High-Capacity Load Bank TestingThis subcontract involves the supply and operation of high-capacity load banks for prime contractors working on Department of Veterans Affairs projects at the Cincinnati VAMC facility. The scope of work requires the deployment of equipment capable of a 125 percent load to test two 1500kW generators with specifications of 3 PH, 4W, 480Y/277V, while verifying the performance of paralleling switchgear under load. The contractor is responsible for the mobilization of heavy testing equipment to the site during weekends and must provide comprehensive load test results and performance reports upon completion. This opportunity is categorized under NAICS code 541380 and is managed by the Department of Veterans Affairs Network Contract Office 10.

250-NETWORK Contract Office 10 (36C250)

POSTED

about 23 hours ago

DEADLINE

Specialized Test Equipment ProviderThis subcontract opportunity with DLA Land At Aberdeen involves the development and provision of specialized test equipment for prime contractors supporting PATRIOT Missile Defense System projects. The selected provider will be responsible for identifying and delivering diagnostic hardware specifically designed to validate Diesel Engine Governor components against strict technical requirements. Final deliverables include validated test reports or the specialized test equipment itself. The project will be performed at Aberdeen Proving Ground and requires a partner with demonstrated experience in testing high-complexity military engine components. Interested parties must respond by October 14, 2026, under NAICS code 541380.

DLA Land At Aberdeen

POSTED

about 23 hours ago

DEADLINE

More opportunities from California → City of Fresno

Same awarding agency

Aggregate/Fill Material SupplierThis subcontract agreement is for an Aggregate/Fill Material Supplier to provide clean, imported fill material for prime contractors working on City of Fresno site restoration projects. The supplier is responsible for the delivery of specified tons or cubic yards of material to project sites using dump trucks, ensuring that all supplies strictly adhere to the specifications set by the City of Fresno and the project Engineer. To maintain compliance, the supplier must provide all necessary Material Safety Data Sheets or source certifications for the fill material provided. The performance of these services will take place in Fresno, California, with a response deadline for the solicitation set for November 3, 2026.

Other Miscellaneous Nondurable Goods Merchant Wholesalers

POSTED

about 16 hours ago

DEADLINE

Utility and Septic System ContractorThis subcontract opportunity is for a Utility and Septic System Contractor to support residential demolition projects for the City of Fresno. The selected contractor will be responsible for cutting and capping existing sewer and water utilities, as well as removing septic tanks at 5223 and 5245 W Ashlan Ave. Additionally, the scope of work includes backfilling all excavation sites to the existing grade using imported fill material to ensure the voids are properly graded. Qualified applicants must possess a valid plumbing or utility contractor license to perform these services. The project is located in Fresno, California, and the response deadline for this solicitation is November 3, 2026. The final deliverables for the contract are the successfully capped utilities and the completed grading of all affected sites.

Water and Sewer Line and Related Structures Construction

POSTED

about 16 hours ago

DEADLINE

Residential Structure Demolition ContractorThis subcontract opportunity is for a Residential Structure Demolition Contractor to support prime contractors on City of Fresno infrastructure projects. The selected contractor will be responsible for the demolition and removal of existing residential buildings, concrete structures, and landscaping located at 5223 and 5245 W Ashlan Ave in Fresno, California. The scope of work includes operating heavy equipment, such as excavators and loaders, to clear the parcels and ensure the legal disposal of all resulting debris. To be eligible for this project, contractors must possess a C-12 demolition license. The solicitation was posted on October 7, 2026, with a response deadline of November 3, 2026. The project falls under NAICS code 238910 and requires the delivery of fully cleared parcels.

Site Preparation Contractors

POSTED

about 16 hours ago

DEADLINE

Lead-Based Paint Abatement SpecialistThis subcontract opportunity is for a Lead-Based Paint Abatement Specialist to support prime contractors on residential projects for the City of Fresno. The selected provider will be responsible for the removal and disposal of lead-based paint, ensuring all work results in certified lead-free surfaces. All operations must be performed using lead containment and removal equipment in strict accordance with Krazan and Associates specifications and EPA Method 7420 analytical standards. Compliance is mandatory with Federal OSHA 29 CFR 1926.62, California OSHA Title 8 GISO 5198, and CSO 1532.1. The project is located in Fresno, California, under NAICS code 562910. Interested parties must submit their responses by the deadline of November 3, 2026.

Remediation Services

POSTED

about 16 hours ago

DEADLINE

Abatement Of Lead Based Paint At 5223 W Ashlan Ave & Demolish And Dispose Residential Structures At 5245 & 5223 W Ashlan Ave, Fresno Ca 93722

Solicitation # 12700204

The City of Fresno is soliciting bids for the abatement of lead-based paint at 5223 W Ashlan Ave and the demolition and disposal of residential structures at both 5223 and 5245 W Ashlan Ave in Fresno, California. This project is being performed in preparation for the Ashlan Avenue Widening from Polk to Cornelia. The scope of work includes the removal of existing buildings, concrete structures, and landscaping, as well as the cutting and capping of sewer and water utilities and the removal of septic tanks. Lead-based paint abatement must be performed according to specifications issued by Krazan & Associates, Inc., and comply with Federal and California OSHA regulations. The contract will be awarded to the lowest responsive and responsible bidder, with a maximum award threshold of 184,000 dollars. Key requirements include a 30 percent self-performance mandate, adherence to prevailing wage standards, and compliance with Buy America and FHWA regulations. Successful bidders must provide a 100 percent payment bond for contracts over 25,000 dollars and a 100 percent performance bond if specified. The contractor is responsible for the costs of a Soils Engineer to ensure fill materials meet a 90 percent maximum dry density. Payment will be issued within 30 days of final invoice receipt.

Site Preparation Contractors

POSTED

about 16 hours ago

DEADLINE

Logan Park Swings Project

Solicitation # 20261006006

All Other Specialty Trade Contractors

POSTED

about 19 hours ago

DEADLINE

Traffic Control & Detour ServicesThis subcontract opportunity with the City of Fresno involves providing comprehensive traffic management and access control services for prime contractors working on city sewer projects. The selected provider will be responsible for implementing traffic control plans and detours while maintaining site access through the use of flaggers, signage, barricades, and traffic cones to ensure safe and compliant vehicle and pedestrian flow around construction zones. The project is located in Fresno, California, specifically within the 93706 zip code, and falls under NAICS code 561990. Interested parties must submit their responses by the deadline of October 27, 2026.

All Other Support Services

POSTED

DEADLINE

Surface Restoration ContractorThe City of Fresno is seeking a Surface Restoration Contractor for a subcontracting opportunity to restore areas disturbed by excavation during city sewer projects. The selected contractor will be responsible for returning pavement, grass, shrubbery, landscaping, gravel, and soil to their original or permit-specified conditions. This work involves utilizing appropriate paving materials and landscaping supplies to ensure that trenches and structure sites match pre-construction conditions. This opportunity is categorized under NAICS code 238910 and will be performed in Fresno, California. Interested parties must submit their responses by the deadline of October 27, 2026.

Site Preparation Contractors

POSTED

DEADLINE

Manhole & Cleanout SpecialistThis subcontract opportunity for the City of Fresno involves specialized sewer infrastructure work under NAICS code 237110. The selected contractor will support prime contractors by performing manhole adjustments, chimney replacements, and the installation of sewer service cleanouts. Key technical responsibilities include locating buried manholes, reconstructing manholes to match existing surfaces, replacing manhole cones and chimneys, and constructing cleanouts utilizing PVC pipe and Vac-A-Tee saddles. The project is located in Fresno, California, specifically within the 93706 zip code. Interested parties must submit their responses by the deadline of October 27, 2026. The scope of work concludes with the delivery of fully adjusted manholes and completed service cleanout installations.

Water and Sewer Line and Related Structures Construction

POSTED

DEADLINE

Sewer Cleaning & Waste Disposal ServiceThis subcontract opportunity with the City of Fresno involves providing specialized sewer cleaning and waste disposal services for prime contractors working on city sewer projects. The scope of work includes cleaning sewer lines, establishing temporary containment, dewatering, and setting up air-drying facilities. Additionally, the contractor is responsible for using vacuum trucks to transport materials and leachate to permitted landfill facilities and providing the necessary disposal manifests upon completion. The project is categorized under NAICS code 237110 and will be performed in Fresno, California. Interested parties must submit their responses by the deadline of October 27, 2026.

Water and Sewer Line and Related Structures Construction

POSTED

DEADLINE

Sewer Inspection & CCTV ServicesThis subcontract opportunity with the City of Fresno involves providing specialized closed-circuit television inspection services for sewer lines on various city projects. The selected contractor will work under prime contractors to conduct inspections using CCTV robotic cameras and manage all recording data through NASSCO-compliant software. Final deliverables must be provided on a USB drive and include both MP4 video files and NASSCO exchange files in .mdb format. The project is categorized under NAICS code 237110 and will be performed in Fresno, California. Interested parties must submit their responses by the deadline of October 27, 2026.

Water and Sewer Line and Related Structures Construction

POSTED

DEADLINE

PVC Sewer Main Installation ContractorThis subcontract opportunity with the City of Fresno involves the furnishing and installation of new PVC sewer mains for prime contractors. The selected contractor will be responsible for installing various sizes of PVC pipe in accordance with Section 17 and Standard Drawing S-10, which covers trench, bedding, and backfill details, including the application of slurry cement backfill. The final deliverable is a fully installed and tested PVC sewer main system. The project is located in Fresno, California, under NAICS code 237110. Interested parties must submit their responses by the deadline of October 27, 2026.

Water and Sewer Line and Related Structures Construction

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS