Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Solar Charging and Power Systems for Trailers

Active

State & Local

Response Deadline09/09/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the design and supply of integrated solar charging systems to be deployed on trailers, requiring a complete solution that includes photovoltaic arrays, battery packs, charge controllers, and a 110 VAC backup power system. The system must be engineered to sustain full brightness operation for 72 consecutive hours without any solar input, ensuring continuous functionality under adverse conditions. The technical specifications demand a robust, self-contained power architecture that balances energy generation, storage, and reliable fallback capability. This subcontract is issued by the Washington County Board of Commissioners in Georgia under NAICS code 335912, which pertains to other electrical equipment and component manufacturing. The solicitation was posted on August 6, 2026, with a response deadline set for September 9, 2026, at 7:00 PM Eastern Time. The system is intended for mobile applications, and the performance location is in Georgia, though specific delivery or installation addresses are not listed. There is no set-aside designation indicated, and no point of contact is provided within the published data. The official details and submission portal can be accessed through the listed state system URL.

General Info

Design and supply of solar-powered trailer systems with 72-hour backup, for Georgia deployment.

Agency

Georgia → Washington County Board of CommissionersView Agency

NAICS

335912 - Primary Battery ManufacturingView NAICS

Place of Performance

GA, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 6

subcontract

Response DeadlineSep 9

Submission deadline

Response Deadline

09/09/2026, 07:00:00 PM UTCin about 1 month

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyGeorgia → Washington County Board of Commissioners

ContactsNo contacts available

OfficeN/A

Organization / Agency

Georgia → Washington County Board of Commissioners

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Design and supply of integrated solar charging systems including photovoltaic arrays, battery packs, charge controllers, and 110 VAC backup, supporting 72 hours of operation at full brightness without solar input.

Similar Contracts

Same NAICS industry code

Supply of Immersion Heater – Liquid Fuel, ElectricThe contract is for the procurement and delivery of a single electric immersion heater unit specifically engineered for use with liquid fuel systems, meeting all applicable military standards and National Stock Number specifications. The unit must comply with rigorous performance and safety requirements dictated by defense protocols, ensuring reliability in operational environments. This is a subcontract under the NAICS code 335912, issued by the Department of Defense through its DDSP NEW CUMBERLAND FACILITY with performance to occur at a location in New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation was posted on August 5, 2026, and responses are due by August 17, 2026, with no set-aside provisions specified, indicating it is open to general industry participation. The contract is accessible via the DIBBS procurement portal for interested vendors to review full technical and administrative requirements.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Non-Immersion Electrical Heating Element SupplyThe contract requires the supply of non-immersion electrical heating elements identified by NSN 4520011514308, with strict adherence to specified WATLOW part numbers and comprehensive compliance with all applicable DLA, MIL-STD, and environmental safety standards. These heating elements are critical components intended for defense-related applications and must meet rigorous performance, durability, and safety criteria as dictated by military specifications. All items must be manufactured and tested to ensure full functionality under extreme operational conditions without immersion in liquids, aligning with the technical requirements outlined by the Department of Defense. The contract is structured as a subcontract under the NAICS code 335912, with a response deadline of August 17, 2026, and was posted on August 5, 2026. The place of performance is designated as Tracy, California, with the DLA Dist San Joaquin acting as the responsible agency under the broader oversight of the Department of Defense. While no specific set-aside designation is provided, suppliers must be prepared to meet all federal procurement requirements and deliver fully compliant units to the specified location. Bidders are directed to the official DIBBS platform for the full solicitation document and submission guidelines, and any proposal must address technical, regulatory, and delivery obligations with precision.

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

Flashlight Manufacturing and AssemblyThe contract entails the full manufacturing, assembly, and testing of tactical flashlights designed to meet rigorous military standards, including MIL-STD-810 for environmental resilience and MIL-STD-129 and ASTM D3951 for packaging and labeling requirements. All work must comply with strict defense specifications to ensure operational reliability under extreme conditions, with final products intended for military use and proper logistics handling. The solicitation is structured as a subcontract under a Total Small Business Set-Aside, exclusively available to small businesses as defined by the SBA, and is classified under NAICS code 335912 for other lighting equipment manufacturing. The performance location is designated as Tracy, California, with a zip code of 95304-5000, and the contracting activity is managed by DLA Dist San Joaquin under the Department of Defense. The opportunity was posted on August 5, 2026, and responses are due by August 17, 2026, providing a two-week window for qualified small businesses to submit proposals.

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

Supply of Electrical Immersion Heating Element (NSN: 4520008028302)The contract pertains to the procurement and delivery of seven commercial electrical immersion heating elements identified by NSN 4520008028302 under a firm-fixed-price arrangement, with no requirement for installation or integration services. The solicitation is structured as a subcontract and falls under a Total Small Business Set-Aside as defined by FAR 19.5, exclusively targeting small business concerns registered with the SBA. The NAICS code 335912 classifies the procurement within the Electrical Equipment and Appliance Manufacturing sector. Performance is designated to occur at the New Cumberland facility with a ZIP code of 17070-5002, and the contract is managed by the Department of Defense through its DDSP New Cumberland Facility. The solicitation was posted on August 5, 2026, with responses due by August 17, 2026, and the opportunity is accessible via the DIBBS platform.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Specialized Heater Component SupplyA specialized electric heater unit, identified by part number 97-1020-97 / CE110-SP, is being procured under a subcontract with traceability to a prior DLA contract, ensuring continuity of specification and performance standards. The requirement is specifically set aside for small businesses under the SBA’s Total Small Business Set-Aside provision, as defined by FAR 19.5, and falls under the NAICS code 335912 for other electrical equipment and component manufacturing. The solicitation was posted on August 5, 2026, with proposals due by August 17, 2026, and the place of performance is designated as New Cumberland, Pennsylvania, with a zip code of 17070-5002. The contracting activity originates from the DDSP NEW CUMBERLAND FACILITY under the Department of Defense, and all responses must be submitted through the official DIBBS portal using the provided solicitation number SPE8E826T4986.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Supply of 12V-100AH Gel-Type Batteries

US Embassy Caracas

POSTED

DEADLINE

Battery Power Supply Manufacturing and Delivery

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Supply of Storage Batteries (NSN: 6140015349090)

Defense Logistics Agency

POSTED

DEADLINE

in about 5 hours

Thermal Release Heater Manufacturing & SupplyThe contract is for the manufacture and delivery of 74 Thermal Release Heaters annually, identified by NSN 5999005049617, a commercial off-the-shelf electrical component that must meet military specifications and associated delivery standards. The product is classified under NAICS code 335912, indicating it falls within the electrical equipment manufacturing sector, and the solicitation is structured as a subcontract with a total small business set-aside under FAR 19.5, meaning only small businesses are eligible to bid. The opportunity is posted by the Department of Defense through the Maritime Supply Chain office, with responses due by August 19, 2026, following the posting date of August 4, 2026. The place of performance and point of contact details are not specified, but the component must be produced and delivered in full compliance with all military requirements, ensuring readiness and reliability for defense applications.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Battery Module Supply (OEM or Authorized Distributor)

POSTED

DEADLINE

160 cm² Non-Flow-Through Fuel Cell Stack SupplyThe contract seeks the supply of a 160 cm² active area non-flow-through fuel cell stack designed for integration into a 250W balance of plant system, targeting applications requiring compact, efficient power generation. The fuel cell must meet specific technical requirements to ensure compatibility with the designated system architecture and operational environment, with performance criteria focused on reliability, energy density, and thermal management under constrained space conditions. The procurement is structured as a subcontract under NAICS code 335912, indicating classification within the other electronic component manufacturing sector, and is managed by the NASA Shared Services Center on behalf of the National Aeronautics and Space Administration. The place of performance is established in Houston, TX, with a response deadline of August 7, 2026, at 6:00 PM local time, following a posting date of August 4, 2026. The solicitation does not specify a set-aside type, nor does it indicate any small business preferences or special contracting requirements beyond the stated technical scope. Proposers must deliver a fully functional fuel cell stack ready for system integration, with no mention of additional services such as installation, training, or long-term maintenance, suggesting the scope is limited to hardware delivery and verification of compliance with the specified performance parameters. All submissions must be made through the provided SAM.gov link, and the contract is anticipated to support NASA’s broader objectives in advanced power systems for space and terrestrial applications.

NASA Shared Services Center

POSTED

DEADLINE

in about 6 hours

Supply of Specialized Lithium-Ion Batteries for RoboticsThe contract pertains to the supply of specialized lithium-ion batteries designed for the Axon Sky-Hero Sigyn/Narfi unmanned ground vehicles, intended to support military or law enforcement robotics operations. These batteries are critical for ensuring extended operational endurance, reliability, and performance in demanding field environments. The solicitation is structured as a subcontract under a Small Business Set Aside, specifically designated as a Total Set Aside, meaning only small business concerns are eligible to compete. The North American Industry Classification System code 335912 identifies the industry as Other Electrical Equipment and Component Manufacturing, indicating the technical and manufacturing sophistication required. Performance of the contract will be centered in Little Rock with a zip code of 72201, suggesting the delivery and potential integration point is tied to a specific operational or logistics hub. The opportunity was posted on August 4, 2026, with responses due by August 11, 2026, indicating a tight seven-day window for qualified small businesses to prepare and submit proposals. The contracting agency is the U.S. Marshal Service under the Department of Justice, highlighting the application of these batteries in federal law enforcement robotics programs.

Department Of Justice US Marshal Service

POSTED

DEADLINE

More opportunities from Georgia → Washington County Board of Commissioners

Same awarding agency

Control Cabinet and User Interface (Keyboard Terminal)Washington County Board of Commissioners is seeking a subcontractor to supply a ruggedized control cabinet equipped with a detachable keyboard terminal designed for outdoor traffic sign applications. The system must remain fully operational even when the keyboard terminal is physically disconnected from the cabinet, ensuring continuous functionality in demanding environmental conditions. The equipment is intended to withstand outdoor exposure and support reliable performance in public infrastructure settings. The solicitation is classified under NAICS code 334310, which pertains to communications equipment manufacturing, and is open for bids until September 9, 2026. All proposals must be submitted by the stated deadline and the resulting contract will support the deployment of durable, field-ready control systems for traffic signage operations.

Audio and Video Equipment Manufacturing

POSTED

about 15 hours ago

DEADLINE

in about 1 month

Hydraulic Mast and Display Raising/Lowering MechanismThe contract seeks the supply and integration of an electric hydraulic cylinder mast capable of raising and lowering a message display with a rated load capacity of 2,000 pounds, designed to operate reliably under extreme environmental conditions. The system must be engineered for durability and consistent performance in harsh weather, ensuring uninterrupted operation regardless of temperature, moisture, or other outdoor stressors. Integration of the mast with the display unit is a critical requirement, necessitating precise mechanical and electrical compatibility to enable smooth, controlled vertical movement. The contract is classified as a subcontract under NAICS code 333999, with a response deadline of September 9, 2026, and was posted on August 6, 2026. The procuring entity is the Washington County Board of Commissioners in Georgia, though specific location details for performance or contact are not provided. The solicitation does not include a set-aside designation, meaning it is open to all eligible contractors without restrictions based on business size or status. The technical scope requires proven capability in heavy-duty hydraulic systems and outdoor electronic integration, with deliverables focused on reliability, safety, and long-term resilience in uncontrolled environmental settings.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 15 hours ago

DEADLINE

in about 1 month

Heavy-Duty Trailer Fabrication and IntegrationWashington County Board of Commissioners is seeking a subcontractor to fabricate heavy-duty custom trailers featuring welded steel frames, removable tongues, and screw jack stabilizers, designed to support a 2,000-pound hydraulic mast while meeting all DOT-compliant requirements for lighting and braking systems. The trailers must adhere to strict transport and display height specifications to ensure compliance with regulatory and operational standards. The procurement is classified under NAICS code 336212 for other motor vehicle parts manufacturing, and bids must be submitted by September 9, 2026, with the contract posting date listed as August 6, 2026. The work will be performed under a subcontract arrangement, and the place of performance and point of contact details are not specified in the available data.

Truck Trailer Manufacturing

POSTED

about 15 hours ago

DEADLINE

in about 1 month

Full Matrix LED Changeable Message Signs – Design, Assembly, and IntegrationWashington County Board of Commissioners is seeking a subcontractor to design, assemble, and integrate four all-LED full matrix changeable message signs equipped with dynamic graphics and integrated control processors. These signs must meet all requirements specified by the Manual on Uniform Traffic Control Devices, Federal Highway Administration, and NTCIP Version 2 standards to ensure operational compliance and interoperability. The contract involves the complete supply and installation of the signage systems, including all necessary hardware and software components required for full functionality and regulatory adherence. The solicitation is open for responses until September 9, 2026, and is classified under NAICS code 334419 which pertains to other communications equipment manufacturing. The place of performance and specific delivery location are not detailed, but the work is expected to support transportation infrastructure under the jurisdiction of the Georgia agency.

Other Electronic Component Manufacturing

POSTED

about 15 hours ago

DEADLINE

in about 1 month

2026 - 28 Portable Message Signs on Trailers (4)

Solicitation # PE-33306-NONST-2027-000000026

Washington County Board of Commissioners in Georgia is seeking suppliers to provide and deliver four portable message signs mounted on trailers, adhering to specified technical requirements. The solicitation, identified as PE-33306-NONST-2027-000000026, was posted on August 6, 2026, with a response deadline of September 9, 2026, at 7:00 PM. This procurement is classified under a SLED entity type and does not specify a set-aside or NAICS code. All signs must be delivered to the specified performance location in Georgia. Primary contact for inquiries is Chris Hutchings, reachable via email at boc@washingtoncountyga.gov or by phone at 478-552-2325. Additional details and submission instructions are available through the official procurement portal linked in the solicitation.

POSTED

about 15 hours ago

DEADLINE

in about 1 month

Traffic Control and Signage Management

All Other Support Services

POSTED

DEADLINE

Construction Inspection and Quality Control Support

Engineering Services

POSTED

DEADLINE

Asphalt Supply – Hot Mix Asphalt

Asphalt Paving Mixture and Block Manufacturing

POSTED

DEADLINE

Roadway Striping and Pavement Marking

All Other Specialty Trade Contractors

POSTED

DEADLINE

Road Resurfacing – Asphalt Overlay

Highway, Street, and Bridge Construction

POSTED

DEADLINE

2026-0025 MULTI COUNTY LMIG ROADS BID

Solicitation # PE-33306-NONST-2027-000000025

The contract involves the resurfacing of multiple roads in Washington County and the specific resurfacing of Noah Station Road in Jefferson County, along with restriping work to ensure proper road markings. It is issued under the solicitation number PE-33306-NONST-2027-000000025 titled 2026-0025 MULTI COUNTY LMIG ROADS BID by the Washington County Board of Commissioners in Georgia. The solicitation was posted on July 13, 2026, with responses due by August 13, 2026, at 7:00 PM. The project falls under a state, local, or educational agency procurement and is being managed by the Georgia state government. Primary point of contact for inquiries is Chris Hutchings, reachable via email at boc@washingtoncountyga.gov or by phone at 478-552-2325. All work is to be performed within the designated counties in Georgia, with no specific city or zip details provided for the place of performance.

Highway, Street, and Bridge Construction

POSTED

DEADLINE