Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, December 9 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

SOLDER, TIN ALLOY

Open
SPE8E9-27-T-0546Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Solicitation SPE8E9-27-T-0546 is a small business set-aside request for quotations for the procurement of 78 units of tin alloy solder, identified by NSN 3439-01-0127137. The material must adhere to ASTM B32-20 and QAP 14153 SQAP-FAT3 standards. Delivery is required within 162 days after order, with the shipping terms set as FOB Origin and both inspection and acceptance occurring at the destination. The primary delivery point is the DLA Distribution New Cumberland facility in Pennsylvania. The contract mandates strict adherence to DLA packaging requirements, specifically RP001 and MIL-STD-129 for marking and labeling. Hazardous materials must be packaged per TQ requirement IP025 and labeled according to the Hazard Communication Standard, while non-hazardous materials follow ASTM D3951. Quality assurance is governed by MIL-STD-1916 or ASQ H1331, with a zero-based sampling plan. Administratively, the contractor must use the Wide Area WorkFlow system for electronic invoicing and comply with various FAR and DFARS clauses regarding cybersecurity, domestic material restrictions, and the safeguarding of covered defense information.

General Info

Small business solicitation for 78 units of tin alloy solder for DLA.

Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I

NAICS

331492 - Secondary Smelting, Refining, and Alloying of Nonferrous Metal (except Copper and Aluminum)

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

1
PDF, High priority: read this first19 pages · rfq
High

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

View Full Breakdown

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I
Contacts1 person available
OfficeUSA
Organization / AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I
Office AddressUSA
Contacts
Matthew Kruc
Sign up to see this detail
Sign up to see this detail

Full Description

Show more
SOLDER,TIN ALLOY
SOLDER, TIN ALLOY
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
0.028 INCH DIA.
U/I SL = 1 LB.
TECH DATA AVAILABILITY:
SAMPLING:
1 SL = 16 OZ
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
TDP Rev A Gen 2 IAW BASIC NON GOVT STD ASTM B32-20 REVISION NR DTD 10/01/2020 PART PIECE NUMBER:
TDP Rev A Gen 2 IAW REFERENCE QAP 14153 SQAP-FAT3 REVISION NR DTD 08/26/2025 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE8E9-27-T-0546
SECTION B
PR: 7019096319 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7019096319 0001 SL 78.000
NSN/MATERIAL:3439010127137
DELIVERY (IN DAYS):0162
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:05/09/2027 Original Required Delivery Date:05/10/2027
SPE8E9-27-T-0546
SECTION B
PR: 7019096319 PRLI: 0001 CONT’D
SPE8E9-27-T-0546 NSN/Part Number: 3439-01-012-7137 Quantity: 78 SL Purchase Request: 7019096319QTY: 78 Delivery: 162 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 331492
New
DIBBS
SOLDER, LEAD ALLOY
Solicitation # SPE8E6-27-T-0645
Solicitation SPE8E6-27-T-0645, issued by DLA Troop Support Construction and Equipment, is for the procurement of 64 units of lead-tin alloy solder wire, 0.040 inches in diameter, supplied in 1 lb spools under NSN 3439-00-250-0062. The contract is a critical application item that must adhere to technical and quality requirements specified in the DLA Master List and basic non-government standard IPC J-STD-600A-01. Delivery is required FOB Origin with a delivery period of 153 days, with an original required delivery date of April 8, 2027, and a need ship date of April 26, 2027. The materials are to be delivered to DLA Distribution Warner Robins in Georgia, where both inspection and acceptance will occur. The contractor must comply with strict packaging and marking standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Because the materials are hazardous, the contractor must follow IP025 guidelines for shipping and provide a Safety Data Sheet meeting 29 CFR 1910.1200(g) and Federal Standard No. 313. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds to the hardware. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and adherence to various FAR and DFARS clauses, including those regarding cybersecurity (DFARS 252.204-7012), the Buy American Act, and the prohibition of covered defense telecommunications equipment.
WARNER ROBINS

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 331492
New
DIBBS
Supplier of Cobalt Alloy L605 Sheets (AMS5537)This subcontract involves the procurement of cobalt alloy L605 sheets to support prime contractors delivering for the DLA Fleet Readiness Center Southeast. The supplier is responsible for manufacturing or sourcing material that adheres to SAE AMS5537K Revision K and QAP 13873 standards. The specific deliverable consists of two sheets measuring .063 by 12 by 24 inches, accompanied by metal certifications submitted via CDRL-METALSCERT-26033. Operational requirements include strict adherence to MIL-STD-1916 or ASQ H1331 for sampling and ASTM D3951 for packaging. Additionally, the supplier must maintain compliance with the Buy American Act and DFARS cybersecurity regulations. Performance for this contract is centered in Jacksonville, Florida, under the oversight of the Department of Defense.
DLA FLEET READINESS CENTER SOUTHEAST

POSTED

4 days ago

DEADLINE

in 4 days
View Details
NAICS: 331492
New
DIBBS
SOLDER, LEAD ALLOY
Solicitation # SPE8E5-27-T-0494
Solicitation SPE8E5-27-T-0494 is a Request for Quotations issued by DLA Troop Support for the procurement of 41 units of lead and tin alloy solder, identified by NSN 3439-01-534-8608. The supplies must adhere to the technical standards of J-STD-006C AMD 1 Revision NR C and are to be delivered FOB Origin to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The required delivery date is April 29, 2027, with a total delivery window of 166 days ADO. Inspection and acceptance will occur at the destination. Packaging must comply with MIL-STD-129 for marking and labeling and RP001 for palletization. Materials determined to be hazardous under FED-STD-313 must follow TQ requirement IP025, while non-hazardous materials must be commercially packaged per ASTM D3951. The contract incorporates several federal regulations, including the Buy American Act and the Berry Amendment. Additionally, the government will not accept items produced via additive manufacturing unless specifically authorized. Payment processing is managed through the Wide Area WorkFlow system.
DDSP NEW CUMBERLAND FACILITY

POSTED

4 days ago

DEADLINE

in 8 days
View Details
NAICS: 331492
New
Federal
Silver Reutilization and Account Maintenance Service
Solicitation # N0025327Q0001
The Naval Undersea Warfare Center Division, Keyport is soliciting quotes for a five-year Indefinite-Delivery, Indefinite-Quantity contract for silver reutilization and account maintenance services. The primary objective is the refinement of silver-bearing materials recovered from batteries to a purity of 99.9% for use in manufacturing new batteries. Annual requirements include the processing of 380,000 troy ounces of high silver content material (greater than 80% silver) and 725,000 troy ounces of low silver content material (80% silver or less), alongside the maintenance of silver accounts for 500,000 troy ounces. The government will disassemble the batteries and separate materials into high and low yield categories prior to shipment, though very small batteries are excluded from this process. The contract will be awarded to a single responsible offeror using Lowest Price Technically Acceptable procedures, with a performance period running from January 20, 2027, to January 19, 2032. Pricing will be structured as Firm-Fixed-Price and Fixed-Price with Economic Price Adjustment based on the London Bullion Market Association Silver Price index, using a base market index value of 75.00 dollars per troy ounce. Key performance requirements include completing silver processing within 60 days of receipt and achieving a refined silver return rate between 75% and 90% of the received net weight. Contractors must maintain all necessary environmental permits for hazardous waste disposal and hold CMMC Level 1 certification. All offers must be submitted electronically via the Procurement Integrated Enterprise Environment.
Naval Undersea Warfare Center

POSTED

5 days ago

DEADLINE

in 15 days
View Details
NAICS: 331492
DIBBS
SOLDER, LEAD-TIN ALLOY
Solicitation # SPE8E6-27-T-0526
Solicitation SPE8E6-27-T-0526 is a small business set-aside procurement issued by the Defense Logistics Agency (DLA) for the supply of 133 units of lead-tin alloy solder, identified by NSN 3439001848953 and part number SN50WRAP3 0.090 1LB. The material must comply with ASTM B32-20 standards and does not have a shelf life requirement. Delivery is required within 160 days, with a need ship date of April 26, 2027, and an original required delivery date of April 12, 2027. The shipment is FOB Origin and will be delivered to DLA Distribution San Joaquin in Tracy, California. The contract mandates strict adherence to hazardous materials protocols, requiring the submission of Safety Data Sheets and Hazardous Communication Standard labels per 29 C.F.R. 1910.1200 and Federal Standard No. 313-E prior to award. Packaging and palletization must follow ASTM-D3951-15 and RP001, while markings must comply with MIL-STD-129, including bar-coding and MSL labels. Inspection and acceptance will occur at the destination. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for invoicing and payment, and compliance with DFARS regulations regarding cybersecurity, the Buy American Act, and the prohibition of covered defense telecommunications equipment.
DLA DIST SAN JOAQUIN

POSTED

11 days ago

DEADLINE

in about 23 hours
View Details
NAICS: 331492
SBIR / STTR
Covetic Material Process Development & ValidationThe NASA SBIR/STTR Program has issued a subcontract for the development and validation of manufacturing processes for covetic, a nanocarbon-infused metal. This project focuses on utilizing additive techniques to optimize feedstock and operational parameters while verifying the resulting enhancements in material properties. The contract is designated as a Total Small Business Set-Aside under the SBIR/STTR mandate, requiring the recipient to have fewer than 500 employees. Performance for this initiative will take place in Huntsville, Alabama, under NAICS code 331492.
NASA SBIR/STTR Program

POSTED

3 months ago

DEADLINE

N/A
View Details
NAICS: 331492
SBIR / STTR
High-Temperature Materials SupplyThis subcontract through the NASA SBIR/STTR Program focuses on the supply of high-specification nickel-based superalloys, specifically Inconel 600 and 718. These materials are required for OHP components that must maintain resistance to creep and oxidation at temperatures reaching 1400K. The project is categorized under NAICS code 331492 and will be performed in Cleveland, zip code 44135. The opportunity is designated as a Total Small Business Set-Aside, adhering to SBIR/STTR mandates for companies with fewer than 500 employees. Posted on August 20, 2026, the contract is managed by the National Aeronautics and Space Administration to ensure the procurement of specialized materials capable of withstanding extreme thermal environments.
NASA SBIR/STTR Program

POSTED

3 months ago

DEADLINE

N/A
View Details
NAICS: 331492
SBIR / STTR
High-Capacity Lithium-Aluminum Alloy Anode DevelopmentThis subcontract, issued by the NASA SBIR/STTR Program, focuses on the development and fabrication of a high-melting-point Li0.7Al0.3 alloy anode. The primary technical objective is to create an anode that maintains stable interface contact with LLZO and exhibits low interfacial resistance, specifically designed for use in batteries operating within extreme environments. The project is designated as a Total Small Business Set-Aside under the SBIR/STTR mandate, restricting eligibility to firms with fewer than 500 employees. Performance for this contract is centered in Cleveland, Ohio, under NAICS code 331492.
NASA SBIR/STTR Program

POSTED

3 months ago

DEADLINE

N/A
View Details
NAICS: 331492
SBIR / STTR
Refractory Metal Feedstock & Components SupplyThe NASA SBIR/STTR Program is seeking a subcontractor to supply specialized refractory metal feedstock, such as tungsten and molybdenum, or high-temperature components including crucibles and heating elements. These materials must be capable of withstanding extreme thermal cycles specifically designed for use in microgravity environments. This opportunity is designated as a Total Small Business Set-Aside under the SBIR/STTR mandate, restricting eligibility to firms with fewer than 500 employees. The work will be performed in Huntsville, Alabama, under NAICS code 331492.
NASA SBIR/STTR Program

POSTED

3 months ago

DEADLINE

N/A
View Details
NAICS: 331492
SBIR / STTR
Shape Memory Alloy (SMA) Material Development and FabricationThis subcontract through the NASA SBIR/STTR Program focuses on the development and fabrication of Shape Memory Alloy (SMA) sheet materials. The primary objective is to optimize these materials for erosion resistance and deicing performance, which involves precise alloy formulation and the tuning of thermal and strain responses. The project is designated as a Total Small Business Set-Aside for entities with fewer than 500 employees, falling under NAICS code 331492. Performance of the contract is centered in Cleveland, Ohio, with the work being managed under the agency's specialized small business innovation research and technology transfer mandates.
NASA SBIR/STTR Program

POSTED

3 months ago

DEADLINE

N/A
View Details
NAICS: 331492
SBIR / STTR
Plasma Spheroidization of Nitride PowdersThe Plasma Spheroidization of Nitride Powders subcontract, issued by the NASA SBIR/STTR Program, focuses on the optimization and scaling of plasma processing techniques. The primary objective is to produce spherical uranium nitride powder particles characterized by enhanced flowability and a reduction in satellite formation. This technical scope includes critical quality control measures such as feedstock screening and the removal of fine particles to ensure material consistency. This opportunity is designated as a Total Small Business Set-Aside under the SBIR/STTR mandate, specifically for firms with fewer than 500 employees. The work is categorized under NAICS code 331492 and is slated for performance in Cleveland, Ohio. Interested parties can find further details through the NASA TechPort portal.
NASA SBIR/STTR Program

POSTED

3 months ago

DEADLINE

N/A
View Details
NAICS: 331492
DIBBS
Component Supply / Raw Material SourcingThis subcontract with the Defense Logistics Agency under the Department of Defense involves the sourcing and supply of raw metal stock or alloy blanks specifically for the production of precision spacer rings. The procurement falls under NAICS code 331492 and requires strict adherence to defense supply chain standards, including the provision of traceable certifications for all materials supplied. The contract was posted on August 17, 2026, and is managed through the Department of Defense's procurement systems. The primary focus of the agreement is to ensure the delivery of high-quality raw materials that meet rigorous military specifications to support the manufacturing of critical precision components.
Defense Logistics Agency

POSTED

3 months ago

DEADLINE

N/A
View Details

More opportunities from Department Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I

Same awarding agency

NAICS: 332439
New
DIBBS
Solder, Tin Alloy Supply
Other Metal Container Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 332312
New
DIBBS
Structural Channel Fabrication and Supply
Fabricated Structural Metal Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 331221
New
DIBBS
Aluminum Alloy Sheet Manufacturing and Supply
Rolled Steel Shape Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 331221
New
DIBBS
SHEET, METAL
Solicitation # SPE8E9-27-T-0550
Solicitation SPE8E9-27-T-0550 is a Request for Quotations issued by DLA Troop Support for the procurement of 252 sheets of aluminum alloy metal sheeting. The material must be 0.190 inches thick, 36 inches wide, and 96 inches long, conforming to Alloy 5052 with H-32 temper. The procurement is a Total Small Business Set-Aside and requires strict adherence to technical standards, including SAE AMS-QQ-A-250/8C and ASTM B660. A critical environmental constraint prohibits the intentional addition of mercury or mercury-containing compounds, in accordance with NAVSEA 5100-003D. The contract mandates rigorous quality and identification standards. A Certificate of Quality Compliance (Mill-Material Certification) must accompany every shipment. Each unit of issue must feature continuous identification markings, including the DLA contract delivery order number, NSN, specification number, grade, alloy, and manufacturer details; failure to comply with these marking requirements is grounds for product rejection. Delivery is FOB Destination to the DLA Distribution New Cumberland facility, with a required delivery date of December 21, 2026. Award eligibility is restricted to suppliers listed on the Qualified Suppliers List for Distributors (QSLD) or Manufacturers (QSLM). While source inspection is generally required for this NSN, it is waived for approved QSLM/QSLD suppliers. Packaging and preservation must comply with MIL-STD-2073-1E and ASTM B660 Level A. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for invoicing and adherence to the Buy American and Balance of Payments Program.
Rolled Steel Shape Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 332111
New
DIBBS
CHANNEL, STRUCTURAL
Solicitation # SPE8E9-27-T-0549
Solicitation SPE8E9-27-T-0549 is a Request for Quotations issued by DLA Troop Support, Construction and Equipment MRO SVC I for the procurement of one structural channel, identified by NSN 9520-01-588-2967. This acquisition is a total small business set-aside under NAICS code 332111. The required delivery date is September 25, 2026, with a need ship date of January 18, 2027, and a delivery lead time of 51 days. The contract is established as FOB Origin, with both inspection and acceptance occurring at the destination, specifically the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contractor must adhere to strict technical and quality requirements found in the DLA Master List, including metal certification and the prohibition of mercury in hardware. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and specific guidelines for metal products under IP083. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various FAR and DFARS clauses, including the Buy American Act and cybersecurity safeguarding standards. Quotations are due by November 27, 2026.
Iron and Steel Forging

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 336413
New
DIBBS
CHUCK, COLLET
Solicitation # SPE8E9-27-T-0547
Solicitation SPE8E9-27-T-0547 is a Request for Quotations issued by DLA Troop Support, Construction and Equipment MRO SVC I for the procurement of two collet chucks, identified by NSN 3460-01-595-5195 and part number FTSL-3-0-3-A from Fatigue Technology, Inc. The contract specifies a delivery timeframe of five days after the order, with an original required delivery date of November 13, 2026. Shipping is designated as FOB Origin and must be sent via the fastest traceable means to Robins AFB, Georgia, with parcel post explicitly prohibited. Inspection and acceptance will occur at the destination. The contractor must adhere to strict packaging and marking standards, specifically ASTM D3951 and MIL-STD-129, while ensuring that DLA Master List of Technical and Quality Requirements take precedence. Palletization must follow RP001 requirements. The contract incorporates various FAR and DFARS clauses, including mandates for safeguarding covered defense information (DFARS 252.204-7012), compliance with the Buy American Act, and the use of the Wide Area Workflow (WAWF) system for electronic invoicing and payment. Offerors must maintain active registration in the System for Award Management (SAM) and provide necessary representations regarding small business status and the use of covered defense telecommunications equipment.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 336413
New
DIBBS
ADAPTER, AIRCRAFT JACKI
Solicitation # SPE8E9-27-T-0552
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 339113
New
DIBBS
FACESHIELD, INDUSTRIAL
Solicitation # SPE8E9-27-T-0551
Surgical Appliance and Supplies Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 332216
New
DIBBS
PRESS, ARBOR, HAND OPERA
Solicitation # SPE8E9-27-T-0545
Saw Blade and Handtool Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 333310
New
DIBBS
CARTRIDGE, WATER DEMINE
Solicitation # SPE8E9-27-T-0548
Commercial and Service Industry Machinery Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 333913
New
DIBBS
Vane-Axial Fan Manufacturer/SupplierThis subcontract opportunity is for a manufacturer or supplier to provide two Vane-Axial Fans for prime contractors working on DLA Troop Support procurement projects. The required units must be AC, 440 Volts, 60 Cycles, Three Phase fans under NSN 4140-00-554-8187. The contract is managed by the Department of Defense through Construction & Equipment MRO SVC I. Strict compliance with military standards is mandatory, including QPL certification, packaging per MIL-PRF-18953 REV C, and shipment marking per MIL-STD-129. Interested parties must respond by November 20, 2026, for performance located in zip code 92136-3581.
Measuring and Dispensing Pump Manufacturing

POSTED

2 days ago

DEADLINE

in 5 days
View Details
NAICS: 332112
New
DIBBS
BAR, METAL
Solicitation # SPE8E9-27-T-0395
Solicitation SPE8E9-27-T-0395 is a request for quotations issued by DLA Troop Support for the procurement of 128 feet of Nickel Alloy 400 metal bar. The material must be cold drawn, hexagonal in shape, measuring 0.750 inches wide across flats, with a weight of 1.870 lb/ft and supplied in whole foot lengths between 6 and 20 feet. This is a critical application item requiring strict adherence to technical and quality standards, including the provision of a Certificate of Quality Compliance (Mill-Material Certification) and Metal Certification Contract Data Requirements Lists. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible for award. Delivery is required within 163 days after order, with a need ship date of April 26, 2027, and a final required delivery date of August 22, 2027, to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. Packaging and preservation must comply with MIL-STD-2073-1E and ASTM A700, while marking must follow MIL-STD-129 and include continuous identification such as the contract delivery order number, NSN, and manufacturer details. Inspection and acceptance will occur at the destination. The procurement is subject to domestic material restrictions, including the Buy American Act and the Berry Amendment, and requires the use of Wide Area WorkFlow (WAWF) for invoicing and payment.
Nonferrous Forging

POSTED

2 days ago

DEADLINE

in 3 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 331492
Closed
DIBBS
Nickel-Copper Alloy Non-Electrical Wire Supply
DLA DIST SAN JOAQUIN

POSTED

17 days ago

CLOSED

6 days ago
View Details
NAICS: 331492
Closed
DIBBS
SOLDER, TIN ALLOY
Solicitation # SPE8E9-27-T-0017
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

18 days ago

CLOSED

13 days ago
View Details
NAICS: 331492
Closed
DIBBS
SOLDER, LEAD ALLOY
Solicitation # SPE8E6-27-T-0129
WARNER ROBINS

POSTED

about 1 month ago

CLOSED

25 days ago
View Details
NAICS: 331492
Closed
DIBBS
Tin Alloy Solder Supplier
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 1 month ago

CLOSED

20 days ago
View Details
NAICS: 331492
Closed
DIBBS
SOLDER, TIN ALLOY
Solicitation # SPE8E5-27-T-0240
Defense Logistics Agency

POSTED

about 1 month ago

CLOSED

20 days ago
View Details
NAICS: 331492
Closed
DIBBS
Supply of Lead-Tin Alloy Solder (NSN 3439002500062)
WARNER ROBINS

POSTED

about 1 month ago

CLOSED

about 1 month ago
View Details
NAICS: 331492
Closed
DIBBS
Supply of Tin Alloy Solder (NSN 3439-01-505-2772)
DLA DIST SAN JOAQUIN

POSTED

about 1 month ago

CLOSED

about 1 month ago
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Get full access
Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS