Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

This Government Contract opportunity from Department Of Defense was posted on January 29, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Combined Sources Sought/Sole Source Synopsis for NAWCAD Raytheon ATNAVICS BOA TO

Closed
N00421-26-RFPREQ-TW00000-0566Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541330
New
SLED
2026 AC Water Main Replacement
Solicitation # 2026-RFQ-042
Solicitation 2026-RFQ-042 is a request for qualifications from the City of Mercer Island Public Works department for professional engineering services to design water system upgrades. The project focuses on replacing approximately 5,000 linear feet of aging asbestos cement water mains with ductile iron mains along SE 40th St and E Mercer Way. The scope is divided into two phases: Phase 1 involves water system and PRV vault replacement on SE 40th St from Greenbrier Ln to 97th Ave SE, and Phase 2 extends the replacement to 97th Ave SE and the 3700 and 3800 blocks of East Mercer Way. Additional components for replacement include fire hydrants and water services. The design must comply with the Reduction of Lead in Drinking Water Act and the City of Mercer Island Standard Details Water. The project follows a goal-based timeline with bid-ready plans for Phase 1 due by Q2 2027 and Phase 2 by Q3 2027, with overall construction completion targeted for Q2 2028. Qualified firms must be licensed in the State of Washington and submit a Statement of Qualifications limited to 12 pages, including a proposed timeline and three references from the last five years. Selection is at the sole discretion of the City, and the awarded firm will negotiate a scope and fee schedule using the City's standard professional services agreement. Administration is managed by the City Manager, with payments issued via City warrant within 45 days of receiving a proper monthly invoice.
Public Works

POSTED

about 8 hours ago

DEADLINE

in 14 days

General Info

NAICS

541330 - Engineering Services

Place of Performance

Saint Inigoes, MD, 20684, USA

Set-Aside

NONE

Documents

1

PWS for ATNAVICS Restoration Services Support Task Order

DOCX, High priority: read this first10 pages · pws
High

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

1 update
PhaseClosed
Posted

special-notice

Notice updated

Response deadline changed from Feb 9, 2026 to Feb 13, 2026. The notice title changed. The notice description changed.

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense
Contacts2 people available
OfficeN/A
Organization / AgencyDepartment Of Defense
Office AddressN/A
Contacts
Jennifer Lundburg

Full Description

Show more

The Naval Air Warfare Center Aircraft Division – Webster Outlying Field (NAWCAD WOLF) intends to award a follow-on Basic Ordering Agreement (BOA) Task Order (TO) to Raytheon Corporation (RTX) of El Segundo, CA CODE 4U884, for a period of 60 months from the effective date of the BOA TO. This requirement is a follow-on procurement and is to provide restoration services in support of Air Traffic Navigation, Integration, and Coordination System (ATNAVICS). These services include conducting sensor pallet restoration, maintenance, and fleet support on the AN/TPN-31(V)7 and AN/TPN-31(V)11 ATNAVICS to meet the current design specifications and system configurations. Failure to maintain the full operational capabilities of the AN/TPN-31(V)7 and AN/TPN-31(V)11 ATNAVICS will negatively impact the ability to rapidly deploy troops and equipment to remote locations to complete the mission of the United States military.



Raytheon is the Original Equipment Manufacturer (OEM) of the AN/TPN-31(V)7 and AN/TPN-31(V)11 ATNAVICS and is the only company that possesses the data rights to key technology utilized and as such is the only firm that can provide the required support. Under the statutory authority 10 USC 2304 (c)(1) as implemented by Federal Acquisition Regulation (FAR) 6.302-1, "Only one responsible source and no other supplies or services will satisfy agency requirements."



This notice of intent is neither a request for proposal nor a solicitation of offers. This synopsis is provided for information purposes only. A determination not to compete this requirement is solely within the discretion of the United States Government.



If you wish to submit a capability statement for review in accordance with FAR Part 10, please send to Reagan Brady by 13 February 2026. Interested vendors should submit their capabilities statement in a document no more than four (4) pages containing no smaller than ten point font. This document shall demonstrate the capability to meet the requirements in the Draft Performance Work Statement (PWS) attached to this posting. Additionally, all responses shall include Company Name, CAGE Code, Address, Business size, and Points of Contact (POCs) including name, phone number, and mailing address. 



For subcontracting opportunities, please visit Raytheon’s website at:


https://www.rtx.com/



2000 E El Segundo BLVD


El Segundo, California


90245-4501, United States


More opportunities from Department Of Defense

Same awarding agency

NAICS: 332812
New
Federal
Area of Interest (AoI) – Metal Cleaning and Finishing Services
Solicitation # W911KF25SC002-AoI0016
The Army Contracting Command Anniston Army Depot is seeking innovative commercial solutions for depot-level metal cleaning, surface preparation, and finishing services for combat vehicle components. This requirement, issued under solicitation W911KF25SC002-AoI0016, encompasses chemical stripping, alkaline immersion cleaning, and abrasive media cleaning to remove paint, corrosion, scale, and carbon. The scope includes a wide array of plating and coating processes such as anodizing, chromate conversion, black oxide, electroless nickel, hard chrome, zinc, tin, copper, and phosphate. The government anticipates utilizing a Multiple Award Task Order Contract structure to ensure technical redundancy and coverage. Key performance requirements include a strict seven-working-day turnaround time and the contractor's responsibility for the secure pick-up and delivery of parts to and from the depot in Alabama. Offerors must demonstrate significant facility capabilities, including specific tank and oven dimensions, crane clearances, and the capacity to handle high-volume part streams of varying sizes. A rigorous quality assurance approach is mandatory, requiring the ability to perform various ASTM and MIL-SPEC tests, such as salt spray, adhesion, and hydrogen embrittlement, either in-house or through certified laboratories. Evaluation will be based on technical feasibility, the safety and efficiency of cleaning methods, innovation in eco-friendly processing, and the robustness of quality control systems. Additionally, the government will assess the offeror's track record with hazardous material management and compliance with environmental regulations. Interested parties must submit a written Solution Brief by October 28, 2026, including a Rough Order of Magnitude or unit pricing structure for evaluation.
Metal Coating, Engraving (except Jewelry and Silverware), and Allied Services to Manufacturers

POSTED

about 11 hours ago

DEADLINE

in 8 days
View Details
NAICS: 541330
New
Federal
Army Contracting Command – Red River Army Depot (ACC-RRAD) Organic Industrial Base (OIB) Modernization Commercial Solutions Opening (CSO)
Solicitation # W911RQ-27-S-C001
The Army Contracting Command – Red River Army Depot (ACC-RRAD) has issued Commercial Solutions Opening (CSO) W911RQ-27-S-C001 to modernize its Organic Industrial Base (OIB). This initiative focuses on Convergent Manufacturing, seeking innovative commercial items, technologies, and services in areas such as digital twins, automation, cyber security, and agile facilities to enhance the Defense Manufacturing Base. The CSO utilizes a streamlined acquisition process authorized by DFARS Subpart 212-70, allowing both traditional and non-traditional defense contractors to compete for FAR Part 12 commercial item contracts. The overall solicitation remains open until September 30, 2027, with a general period of performance for awarded solutions typically not exceeding 12 months. The procurement is executed through specific Areas of Interest (AoIs), which have included requirements for micro trucks, industrial parts washer leasing and maintenance, and fire suppression system repairs for Building 431. The evaluation process is conducted in three phases: an initial solution brief, a presentation or pitch, and a final Commercial Solutions Proposal. Technical evaluations prioritize responsiveness to the AoI, technical merit, and innovation, while price proposals must be determined as fair and reasonable. Awardees must be registered in the System for Award Management (SAM) and possess a Unique Entity ID. Specific project requirements may include strict adherence to military marking standards, environmental liability insurance, and certification by registered professional engineers.
Engineering Services

POSTED

1 day ago

DEADLINE

in 11 months
View Details
NAICS: 541330
New
Federal
AIR FORCE CRYPTOLOGIC OFFICE COMMERCIAL SOLUTIONS OPENING
Solicitation # FA7037-21-S-C001
The Air Force Cryptologic Office Cyberspace Intelligence Surveillance and Reconnaissance and Multi-Domain Innovation Division is soliciting innovative commercial capabilities through Commercial Solutions Opening FA7037-21-S-C001. The agency is seeking mature technologies and services in Electromagnetic Warfare, Information Operations, and electromagnetic digital communications, with a specific goal of achieving a field demonstration within one year. This effort emphasizes the use of novel material approaches and innovative services, including a recent update to incorporate Super Intelligence. Awards may be issued as contracts or Other Transactions with periods of performance typically ranging from one to five years. The procurement follows a competitive two-phase submission process governed by 10 USC 3458 and DFARS 212.70. Phase I requires the submission of Quad Charts and White Papers, which are evaluated based on technical merit, importance to the AFCO mission, and fund availability. Offerors who are determined to be technically qualified may be invited to submit full Phase II proposals, including a detailed Statement of Work and a price proposal. All submissions are treated as commercial items, and offerors must possess the necessary personnel and facility security clearances to handle classified work in accordance with the National Industrial Security Program Operating Manual.
Engineering Services

POSTED

5 days ago

DEADLINE

in 11 months
View Details
NAICS: 236220
New
Federal
EIE485 Consolidated Munitions on Quarry Hill, Eielson AFB, AK
Solicitation # W911KB27RWP04
The U.S. Army Corps of Engineers, Alaska District, is conducting market research for project EIE485, which involves the consolidation of munitions storage functions at Eielson Air Force Base, Alaska. The project scope includes the design and construction of new munitions storage facilities at Quarry Hill, including a warm storage vehicle facility, and the demolition and debris removal of 12 existing facilities at Engineer Hill. All designs must strictly adhere to Air Force Standard Designs, specifically Defense Explosives Safety Regulation 6055.09 and Air Force Manual AFMAN 91-01 Explosives Safety Standards. The target budget for this effort is approximately 196.4 million dollars. The anticipated period of performance spans from fiscal year 2027 to 2031, with design work beginning in FY27 and construction starting no earlier than FY29. The government is currently evaluating the most effective project delivery method and contracting vehicle, considering options such as Accelerated Design-Build to Budget via a FAR-based approach or Other Transaction Authority vehicles like Construction Manager at Risk or Progressive Design-Build. Key project challenges identified for industry feedback include site constraints such as permafrost and PFAS. The government is seeking input from a wide range of socioeconomic business categories to determine the optimal acquisition strategy and evaluation criteria, focusing on technical approach, past performance, and team integration.
Commercial and Institutional Building Construction

POSTED

6 days ago

DEADLINE

in about 23 hours
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS