Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

This Combined Synopsis/Solicitation opportunity from Department Of Defense was posted on April 26, 2024. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Sole Source to Kongsberg Underwater Technology, LLC for Evaluation and Optional Repair of Navigation Pressure Container C2

Closed
N61331-24-T-RH05Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541330
New
SLED
Fire Alarm engineering for Lewis County
Solicitation # 2026-RFQ-040
Lewis County is soliciting qualifications under solicitation 2026-RFQ-040 for a professional engineering firm to provide comprehensive design and engineering services for fire alarm systems. The project encompasses several County-owned facilities, including the IT Building, Historic Courthouse, Health Building, and Lewis County Jail. The selected firm will be responsible for conducting on-site evaluations to determine the remaining useful life of existing systems, assessing code compliance with NFPA 72, IBC, and IFC standards, and developing bid-ready construction drawings and technical specifications. All designs must be stamped by a licensed electrical engineer familiar with Washington State fire alarm requirements and must integrate smoothly with existing infrastructure to ensure standardized maintenance and operations. Proposals are due by November 10, 2026, via the OpenGov platform and will be evaluated by a committee of at least three County employees using a points-based system. The evaluation criteria are equally weighted at 20 percent each across four categories: firm qualifications (including NICET certifications and licensed engineer availability), responsiveness and capacity to begin work within 30 days, regulatory compliance and permitting records, and the clarity and detail of blueprint designs. Applicants must provide a statement of qualifications, three public agency references from the last five years, and resumes of key personnel. The contract is administered by Matt Patana, Capital Infrastructure Specialist, based in Chehalis, Washington.
Capital Infrastructure

POSTED

about 19 hours ago

DEADLINE

in 21 days

General Info

Contract Value

$7,162

NAICS

541330 - Engineering Services

Place of Performance

Panama City Beach, FL, 32407, USA

Set-Aside

NONE

Award Issued Date

Documents

4

Commercial Service Clauses - KUTL

DOCX, High priority: read this first3 pages · specifications
High

SOW - Navigation Pressure Container C2 Evaluation and Repair

PDF, High priority: read this firstsow
High

PR 1301151524 - Sole Source Justification for KUT C2 Sensor Inspection

PDF, Low priorityjustification-and-authorization
Low

Synopsis: Inspection of Government Owned KUT C2 Sensor

DOCX, Low priority1 page · presolicitation
Low

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseClosed
Posted

Combined Synopsis

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Naval Surface Warfare Center
Contacts2 people available
OfficePANAMA CITY BEACH, FL, 32407-7001, USA
Office AddressPANAMA CITY BEACH, FL, 32407-7001, USA

Full Description

Show more
The Naval Surface Warfare Center Panama City Division, FL (NSWC PCD) intends to award a sole source, firm fixed price purchase order using simplified acquisition procedures to Kongsberg Underwater Technologies (KUT) for the evaluation and potential repair of a KUT C2 sensor. This procurement is sole source for the following reason: Kongsberg Underwater Technology, LLC is the Original Equipment Manufacturer of the Navigation pressure Container C2 and has proprietary information that is required to evaluate and repair the item. No other company has access to the required information. Destination to the Naval Support Activity Panama City (NSA PC), Receiving Office Building 100, 100 Vernon Ave., Panama City, FL 32407. Small Business Size standard $15M, NAICS Code 541330. PSC is R425. 1. Identification of the agency and the contracting activity, and specific identification of the document as a - Sole Source Justification. This is a sole source justification. Contracting activity is NSWC-PCD, Code 024, 110 Vernon Ave., Panama City, FL, 32407. 2. Nature and/or description of the action being approved. This action will award a firm fixed price contract for the inspection of a Government Owned Navigation Pressure Container C2 with the option to repair. 3. A description of the supplies or services required to meet the agency's needs (including the estimated value). Evaluation of the Government owned Navigation Pressure Container C2. Depending on the findings of the Evaluation, the Government may elect to exercise an OPTION to repair the sensor. This acquisition will be conducted using simplified acquisition procedures with a total estimated more than $25,000. The Government's minimum needs have been verified by the certifying technical and requirements personnel. This memo does not authorize acquisition for other requirements. This purchase will be funded with FY24 OMN. 4. Identification of the justification rationale and, if applicable, a demonstration of the proposed contractor's unique qualifications to provide the required supply or service. 10 U.S.C. 2304 (c) - Only one responsible source and no other supplies or services will satisfy agency requirements, FAR 6.302-1. The Naval Surface Warfare Center Panama City Division (NSWC PCD) currently has a need for the service listed in Paragraph 3 of this document. Kongsberg Underwater Technology, LLC (KUTL) is the Original Equipment Manufacturer of the Navigation pressure Container C2 and has proprietary information that is required to evaluate and repair the item. No other company has access to the required information. As such, the government does not expect significant savings through competition. Additionally, utilizing any other firm than KUTL will result in unacceptable delays in fulfilling the Government's requirements in order facilitate any other firm with the repairs of this equipment which KUTL is the OEM and proprietary rights holder. Thus, it is more advantageous to the Government to award on a sole source basis to the KUTL for the services listed in Paragraph 3. 5. A determination by the ordering activity contracting officer that the order represents the best value consistent with FAR 13.106-1(b). The Contracting Officer has determined that the order represents the best value and results in the lowest overall cost alternative (considering price, special features, administrative costs, etc.) to meet the Government's needs. 6. A description of the market research conducted among schedule holders and the results or a statement of the reason market research was not conducted. For the reasons specified in paragraph 4 above, Kongsberg Underwater Technology, LLC is the only source that can meet the Government's needs. This requirement will be synopsized in the government point of entry SAM.gov because it is estimated greater than $25,000.00. 7. Any other facts supporting the justification. None. 8. A statement of the actions, if any, the agency may take to remove or overcome any barriers that led to the restricted consideration before any subsequent acquisition for the supplies or services is made. As stated in paragraph 4 above, Kongsberg Underwater Technology, LLC is the only source that can meet this requirement. SIGNATURE PAGE FOLLOWS

More opportunities from Department Of Defense → Naval Surface Warfare Center

Same awarding agency

NAICS: 332710
New
Federal
Small Business Set Aside for MK68 Spare and Repair Parts Fabrication IAW the attached NAVSEA Drawing, SOW, and ALL additional attachments. Request Access to drawings through SAM. Provide your Cage Code when requesting access in SAM.
Solicitation # N61331-27-Q-JC01
Solicitation N61331-27-Q-JC01 is a total Small Business Set Aside for the Naval Surface Warfare Center Panama City Division to acquire and fabricate spare and repair parts for the MK68 System. The scope of work includes the fabrication and assembly of six Bore Rod Gag Pin Lanyard Assemblies, four End Caps, and four MK 68 MOD 1 Thermal Battery Connector Assemblies in accordance with specific NAVSEA drawings. All hardware must be delivered to Panama City Beach, Florida, within 180 days of the purchase order award. Marking and packing must comply with NAVSEA D-247-H005 standards, and the contractor is required to provide a testing report as part of the contract data requirements. Award will be determined based on the best value to the government, evaluating price, delivery terms, quality, and past performance via the Supplier Performance Risk System. Prospective offerors must request access to technical drawings through SAM by providing their Cage Code and must submit quotes to the designated contract specialist by the closing date. Invoicing and receiving reports must be processed through the Wide Area Workflow system, with mandatory email notifications sent to the contracting officer and COR. This is an unclassified effort, though it requires compliance with Controlled Unclassified Information and OPSEC countermeasures to protect sensitive technical data.
Machine Shops

POSTED

1 day ago

DEADLINE

in 3 days
View Details
NAICS: 334513
New
Federal
Mitutoyo Legex 9106 Coordinate Measuring Machine
Solicitation # N6426727Q4001
The Naval Surface Warfare Center, Corona Division, is conducting market research through a sources sought notice, solicitation number N6426727Q4001, to identify capable sources for the procurement of one Mitutoyo Legex 9106 Coordinate Measuring Machine. This is a brand name procurement based on specific precision and software compatibility requirements. The system must include the Legex 9106 Takumi Main Unit, an MPP-310Q High Accuracy Probe Head, a High-Precision Scanning Probe System F with MCOSMOS software and M3 Carbon Fiber Stylus Kit, MCOSMOS-3 CNC CMM with MiCAT Planner Off-line, and three DELL Precision 5860XL Towers, one of which must include a touchscreen monitor. Interested parties under NAICS code 334513 must submit a capability statement to Contract Specialist Julia Hunt by 5:00 PM PDT on October 26, 2026. The statement should include company identification, CAGE code, UEI number, business size, estimated unit pricing, lead time, and any industry commentary on the draft purchase description. The equipment will be delivered to the Naval Surface Warfare Center in Norco, California, with a required delivery date as soon as possible after the award. This notice is for informational purposes to determine the appropriate acquisition method and does not constitute a formal solicitation or commitment to award a contract.
Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

5 days ago

DEADLINE

in 6 days
View Details
NAICS: 332710
New
Federal
Sources Sought for Mechanical Minesweeping Cutters Fabrication
Solicitation # N6133127SNQ01
The Naval Surface Warfare Center Panama City Division is conducting market research through a Sources Sought announcement to identify capable contractors for the manufacture, testing, and delivery of Mechanical Minesweeping Cutter Assemblies and Elevating Fin Assemblies. This effort supports a Foreign Military Sale case for the Republic of Korea Navy. The anticipated contract will be a firm-fixed-price agreement with an ordering period of up to five years, with all materials required for delivery to Panama City, Florida, by October 1, 2027. The scope of work includes the fabrication of MK 12, MK 14, and MK 15 cutter assemblies, as well as elevating fin assemblies, adhering to specific US Navy drawings and NAVSEA marking and packing standards. Contractors will be responsible for conducting in-factory fit and function tests, providing the government with two weeks' notice for inspections, and submitting detailed test and material traceability reports. Interested sources under NAICS 332710 must submit a business profile and technical capabilities summary no later than October 23, 2026. Small businesses are specifically required to address compliance with FAR 52.219-14 regarding limitations on subcontracting. While the task is unclassified, performance requires access to Controlled Unclassified Information. This announcement is for planning purposes to determine the competitive nature of the requirement and potential small business set-asides; it is not a solicitation for proposals.
Machine Shops

POSTED

6 days ago

DEADLINE

in 3 days
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS