Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

This Combined Synopsis/Solicitation opportunity from Department Of Defense was posted on June 22, 2020. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Sole Source to Maritime Arresting Technologies LLC for Boat-Stopper Performance Enhacing Package

Awarded
N61331-20-Q-JK33Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541330
New
SLED
2026 CPRG NCD SOQ
Solicitation # 2026-SOQ-004
The City of Rogers is soliciting Statements of Qualifications (SOQ) under solicitation number 2026-SOQ-004 for Natural Channel Design services to restore approximately 4,200 linear feet of stream in an urban setting. The scope of work includes engineering, plan design, hydrologic and hydraulic modeling, and the procurement of all necessary local, state, and federal regulatory permits, including potential Letter of Map Revision submissions to FEMA. This project is funded by the Climate Pollution Reduction Grant (CPRG) subaward CPRG-NWA-001 and EPA award 02F75801, requiring compliance with EPA nondiscrimination regulations, Title VI of the Civil Rights Act of 1964, and 40 CFR Parts 5 and 7. Key milestones include the completion and approval of construction plans and permit applications by May 1, 2027, with final construction completion targeted for December 31, 2027. Selection is based on a ranking of qualifications rather than price, with the highest-ranked firm invited to negotiate a contract. Evaluation criteria focus on professional staff expertise, past performance, understanding of the scope, and the quality of the work plan. Interested firms must submit a PDF via OpenGov or hard copy to Colt Craig by November 10, 2026. Submissions are limited to 25 pages and must include Standard Form 330 Part II, an Equal Employment Opportunity policy, the Arkansas DFA Illegal Immigrant Contractor Disclosure Form, and EPA certifications regarding debarment and lobbying for contracts exceeding 100,000 dollars. Additionally, firms must maintain active registration in SAM.gov and demonstrate a commitment to DBE goals through six good faith efforts in subcontracting per 40 CFR 33.301.
Community Development

POSTED

about 3 hours ago

DEADLINE

in 12 days
NAICS: 541330
New
International
Pump Optimisation and Aeration Efficiency Analysis
Solicitation # FA2253
Thames Water Utilities Limited is establishing a single-lot, sole-supplier framework agreement under solicitation FA2253 for pump optimisation and aeration efficiency services. The contract focuses on the monitoring, testing, and analysis of pumping and aeration systems across approximately 60 operational sites, encompassing roughly 200 tests during the AMP period. The primary objective is to reduce whole-life costs and improve operational performance through a structured delivery model that includes site identification, efficiency studies, and performance monitoring. The agreement will feature fixed pricing structures based on an agreed rate card and will be managed through key performance indicators to ensure strategic partnership and continuous improvement. The contract is scheduled for an initial three-year term starting May 10, 2027, with potential extensions up to a maximum of eight years, ending May 9, 2035. Eligible suppliers must demonstrate a proven track record of delivering measurable savings and innovation and must have the capacity to operate within London, the Thames Valley, and the Home Counties. Award selection is based on a 50% technical and 50% commercial weighting. The procurement process is a multi-stage procedure requiring a Pre-Selection Questionnaire via SAP Ariba by October 19, 2026, followed by an Invitation to Negotiate stage. Successful providers must also meet stringent insurance requirements, including 15 million pounds for public and products liability and 10 million pounds for professional indemnity.
Thames Water Utilities Limited

POSTED

about 3 hours ago

DEADLINE

N/A
NAICS: 541330
New
SLED
Request for Qualifications - Conn Dam Stability Assessment, Spillway Improvements, and Feasibility Alternatives Study
Solicitation # 2026-RFQL-054
The City of Napa Utilities Department is seeking a qualified consulting team through Request for Qualifications 2026-RFQL-054 to perform a stability assessment, spillway improvements, and a feasibility alternatives study for the Conn Dam. The project is driven by requirements from the California Department of Water Resources Division of Safety of Dams (DSOD), which identified that the existing spillway does not meet current Probable Maximum Flood (PMF) design criteria and raised concerns regarding the long-term geotechnical stability of the dam embankment. The selected consultant will be responsible for conducting comprehensive subsurface explorations, performing static and seismic slope stability evaluations, and recommending alternatives to mitigate spillway deficiencies. Additionally, the scope includes evaluating options to increase reservoir storage capacity to enhance water supply reliability and flood protection, while supporting future U.S. Army Corps of Engineers (USACE) feasibility studies. This procurement follows a Qualifications-Based Selection process per the Brooks Act, where the award is based on technical capability and experience rather than cost. Evaluation is a two-step process consisting of a Statement of Qualifications weighted at 70 percent and optional oral interviews weighted at 30 percent. A critical project milestone is the submission of a comprehensive geotechnical investigation report to the DSOD by December 31, 2028. The contract requires strict adherence to federal and state regulations, including 2 CFR Part 200 Uniform Guidance, the Build America Buy America Act, and various civil rights and accessibility certifications. Statements of Qualifications are due by October 29, 2026, via the City's Opengov procurement portal.
Utilities Department

POSTED

about 4 hours ago

DEADLINE

in about 5 hours

General Info

Contract Value

$90,000

NAICS

541330 - Engineering Services

Place of Performance

Panama City Beach, FL, 32407, USA

Set-Aside

SBA

Award Issued Date

Documents

2

Sole+Source+Justification+Redacted.docx

DOCX

Supply+Commercial+Sole+Source+SB+UID.docx

DOCX

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseAwarded
Posted

Combined Synopsis

Awarded

Contract was awarded

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Naval Surface Warfare Center
Contacts2 people available
OfficePANAMA CITY BEACH, FL, 32407-7001, USA
Office AddressPANAMA CITY BEACH, FL, 32407-7001, USA

Full Description

Show more
The Naval Surface Warfare Center Panama City Division, FL (NSWC PCD) intends to award a sole source, firm fixed price purchase order using simplified acquisition procedures to Maritime Arresting Technologies, LLC, for the Boatstopper performance enhancing package which includes parts for increased vessel stopping capability. This procurement is sole source for the following reason: Maritime Arresting Technologies is the only US company that offers the vessel stopping system using drogues. The enhancing components will be utilized during vessel stopping testing to determine the optimum design for the developing MVSOT CDD requirement. If the enhancing package were not to be procured, the development of another source would be required resulting in significant cost and schedule slip. Delivery shall be no later than sixteen (16) weeks. Identification of the agency and the contracting activity, and specific identification oil the document as a "Limited Source Justification." This is a sole source justification. Contracting activity is the Naval Sea Systems Command, Naval Surface Warfare Center, Panama City Division (NSWC PCD), 110 Vernon Avenue, Panama City, FL 32407-7001 (Contracts Department Code 02). 2. Nature and/or description of the action being approved. This action will award a firm fixed Price purchase order to Maritime Arresting Technologies LLC, 500 Anclote RD, Unit B, Tarpon Springs FL 34689 for Boatstopper performance enhancing package which includes parts for increased vessel stopping capability. These components will be included in planned drogue line testing at NSWC PCD for evaluation to meet Maritime Vessel Stopping Occlusion Technologies (MVSOT) Capability Development Document (CDD) requirements. A description of the supplies or services required to meet the agency's needs (including the estimated value). The contract effort is to acquire: Description Part number Quantity Boatstopper Performance Enhancing Package BSPEPl 1 The Boatstopper Performance Enhancing Package includes components that can be used to enhance the vessel stopping performance of the standard Boatstopper system offered by Maritime Arresting Technologies. These enhancing components will be utilized during vessel stopping testing to determine the optimum design for the developing technology. These components include alternate drogue size, reefing drogues, and drogues that change in shape The Government's minimum needs have been verified by the certifying technical and requirements personnel. This memo does not authorize acquisition for other requirements. This acquisition will be conducted using simplified acquisition procedures with a total dollar Value above micro-purchase levels, but not exceeding the simplified acquisition threshold of $250,000.00. All equipment will be delivered no later than after award of the order. The contract action will be funded with: FY20 Research, Development, Test, & Evaluation (RDT&E) reimbursable funds. Identification of the justification rationale and, if applicable, a demonstration of the proposed contractor's unique qualifications to provide the required supply or service. 10 U.S.C. 2304(c) (1 - Only one responsible source and no other supplies or services will satisfy agency requirements, FAR 6.302-1. The components being procured are in attempt to enhance the performance of an existing product in attempt to meet MVSOT CDD requirements. Maritime Arresting Technologies is the only US Company that offers the vessel stopping system using drogues. There is another vendor, but they are based out of the United Kingdom. Development of another source would be expensive in that the entire system would have to be engineered and produced. By purchasing the enhancing products from Maritime Arresting Technologies, the new products will be able to integrate completely with the existing Boatstopper system. Procuring this package allows NSWC PCD to utilize existing equipment, while allowing testing of a US based supplier. A determination by the ordering activity contracting officer that the order represents the best value consistent with FAR 13.106-1(b) The Contracting Officer has determined that the order represents the best value and results in the lowest overall cost alternative (considering price, reoccurring cost, administrative costs, engineering and redesign costs, etc.) to meet the Government's needs. A description of the market research conducted among schedule holders and the results or a statement of the reason market research was not conducted. Market research was performed when purchasing the original Boatstopper system from Maritime Arresting Technologies. There are currently only two companies that make the vessel stopping systems from drogues: Maritime Arresting Technologies and BCB International. BCB International is based out of the United Kingdom therefore the original Boatstopper system was purchased from Maritime Arresting Technologies. Since the development is focused on improving the performance of the existing system the additional components needs to be purchased from the same vendor to ensure the new components fully integrate within the existing system used in testing. This requirement will be synopsized via posting on the Contract Opportunities Beta.SAM.gov website in accordance with FAR 5.2. No additional market research was conducted for the reasons specified in paragraph 4. Any other facts supporting the justification. None A statement of the actions, if any, the agency may take to remove or overcome any barriers that led to the restricted consideration before any subsequent acquisition for the supplies or services is made. As stated in paragraph 4 above, Maritime Arresting Technologies is the only company that can meet the requirement. F.O.B. 52.247-34 Destination Section G 252.232-7006 Wide Area Workflow Payment Instructions 52.232-12 Advance Payments Section I - Contract Clauses 52.204-22 Alternative Line Item Proposal (Jan 2017) 52.212-4 Contract Terms and Conditions -- Commercial Items (May 2015) 52.227-19 Commercial Computer Software License (Dec 2007) 52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders -- Commercial Items Preselected: 52.203-19 Prohibition on Requiring Certain Internal Confidentiality Agreements or Statement (Jan 2017) 52.209-10 Prohibition on Contracting with Inverted Domestic Corporations (Nov 2015) 52.233-3 Protest After Award (Aug 1996) 52.233-4 Applicable Law for Breach of Contract Claim (Oct 2004) 52.219-6, Notice of Total Small Business Aside (Nov 2011) Required: 52.222-50 Combatting Trafficking in Persons (Mar 2015) 52.223-18 Encouraging Contractor Policies to Ban Text Messaging While Driving (Aug 2011) 52.232-33 Payment by Electronic Funds Transfer--System for Award Management JUL 2013 52.232-39 Unenforceability of Unauthorized Obligations (Jun 2013) 52.232-40 Providing Accelerated Payments to Small Business Subcontractors (Dec 2013) 52.243-1 Changes Fixed-Price 252.204-7012 Safeguarding Covered Defense Information and Cyber Incident Reporting DEC 2015 252.213-7000 Notice to Prospective Suppliers on Use of PPIRS (JUN 2015) 252.203-7000 Requirements Relating to Compensation of Former DoD Officials (SEP 2011) 252.203-7002 Requirement to Inform Employees of Whistleblower Rights (Sep 2013) 252.204-7003 Control of Government Work Product (Apr 1992) 252.204-7008 Compliance with Safeguarding Covered Defense Information Controls (Oct 2016) 252.204-7009 Limitations on the Use or Disclosure of Third-Party Contractor Reported Cyber Incident Information 252.204-7012 Safeguarding Covered Defense Information and Cyber Incident Reporting (Oct 2016) 252.204-7015 Notice of Authorized Disclosure of Information by Litigation Support (May 2016) 252.211-7003 Item Identification and Valuation 252.225-7048 Export Controlled Items (Jun 2013) 252.232-7010 Levies on Contract Payments (Dec 2006) 252.247-7023 Transportation of Supplies by Sea (Apr 2014) 252.246-7007 Contractor Counterfeit Electronic Part Detection and Avoidance System 252.246-7008 Sources of Electronic Parts Section K - Representations, certifications, and other statements of offerors or respondents 52.203-18 Prohibition on Contracting with Entities that Require Certain Internal Confidentiality Agreements or Statements--Representation (Jan 2017) 52.204-19 Incorporation by Reference of Representations and Certifications (Dec 2014) 52.209-11 Representation by Corporations Regarding Delinquent Tax Liability or a Felony Conviction (Feb 2016) Section L - Instructions Conditions and Notices to Bidders 52.204-7 System for Award Management (Jul 2013 52.204-13 System for Award Management Maintenance JUL 2013 52.211-14 Notice of Priority Rating

More opportunities from Department Of Defense → Naval Surface Warfare Center

Same awarding agency

NAICS: 334513
New
Federal
Small Business Set Aside for Sierra Instruments Brand Mass Flow Controller per attachments
Solicitation # N61331-27-Q-KS02
The Naval Surface Warfare Center, Panama City Division, is soliciting quotes for a firm fixed price purchase order to acquire Sierra Instruments Series 100 Smart-Trak2 Mass Flow Controllers (Part number: C100L-DD-2-OV1-SV1-PV2-V1-S4). This procurement is a total Small Business Set-Aside under NAICS code 334513. The hardware is intended for integration with hyperbaric chamber systems to support the evaluation and certification of diver's life support equipment. All units must be delivered with certificates of conformance and standard calibration certificates, as only successfully calibrated articles are qualified for acceptance. Quotes must be submitted on company letterhead with full specifications, CAGE code, and lead time to Kaitlin Summerville by November 4, 2026, at 11:00 AM Central Time. Award will be based on the best value to the government, considering price, delivery, quality, and past performance, with a specific focus on the lowest price for the required brand name product. Delivery is to the Navy Experimental Diving Unit in Panama City, Florida, between 0900 and 1430 on weekdays. Invoicing must be processed through the Wide Area Workflow (WAWF) system with payment terms set at NET 30 days.
Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

about 6 hours ago

DEADLINE

in 6 days
View Details
NAICS: 334513
New
Federal
Total Small Business Set Aside for Brand Name: Environics Series 4040 Computerized Gas Dilution System
Solicitation # N61331-27-Q-TR03
Solicitation N61331-27-Q-TR03 is a combined synopsis and solicitation issued by the Naval Surface Warfare Center, Panama City Division, for a brand name Environics Series 4040 Computerized Gas Dilution System. This procurement is a Total Small Business Set Aside under NAICS code 334513 and will be awarded as a Firm Fixed Price purchase order. The required equipment includes a portable configuration with specific mass flow controllers for dilution and span gases, an additional span circuit, and four additional span gas ports. All components must utilize 316L electropolished stainless steel tubing and be cleaned for oxygen use, with certificates of conformance for cleaning and calibration required upon delivery. Quotes must be submitted in PDF format on company letterhead to Terra Roberts by November 6, 2026, at 17:00. Submissions must include the offeror's CAGE code, detailed technical specifications, and delivery lead times. Shipping charges must be listed as a separate line item if not included in the base pricing. The government will determine the award based on Best Value, evaluating price, delivery schedule, quality, and past performance, including data from the Supplier Performance Risk System. Payment terms are NET 30 days, with invoicing processed through the Wide Area Workflow system. Deliveries to the Panama City Beach, Florida location are restricted to Monday through Friday between 0900 and 1430.
Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334516
New
Federal
Low-Range Force Frame Kit
Solicitation # N6426726R1010
Solicitation N6426726R1010 is a request for proposals for a five-year Indefinite Delivery/Indefinite Quantity (IDIQ) contract to procure Low-Range Force Frame Kits (FFK) for the Naval Surface Warfare Center, Corona Division. The contract covers a minimum of two and a maximum of 45 kits, which serve as standardized platforms for mounting and calibrating handheld force gages, spring gages, and dynamometers. Technical requirements are governed by Calibration Standards Specification (CSS) 06-3228 and MIL-PRF-28800G environmental classifications. Key deliverables include the hardware, operator and service manuals (CDRL T001), and a repairable parts list (CDRL A001), with a required delivery window of 120 calendar days from the issuance of a delivery order. The basis of award is Lowest Price Technically Acceptable (LPTA), evaluating offers based on technical acceptability, past performance from the last three years, and total price calculated as the unit price for 45 kits. Offerors must provide a single firm-fixed unit price applicable for the entire five-year period, submitted as FOB Destination. Proposals must be submitted electronically via the PIEE Solicitation Module by November 4, 2026. Required submission documents include a completed cross-reference matrix, a statement of acceptance for delivery lead times, and a small business subcontracting plan for non-small business concerns. All shipments must comply with MIL-STD-129 and MIL-STD-130 for marking and unique item identification.
Analytical Laboratory Instrument Manufacturing

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 541330
New
Federal
Mission Module Engineering and Technical Services
Solicitation # N6133127R0006
Solicitation N6133127R0006 is a Small Business Set-Aside request for proposals under the Seaport NxG Multiple Award Contract (MAC), restricted exclusively to Seaport MAC holders. The contract supports the Naval Surface Warfare Center Panama City Division (NSWC PCD) Modular Integration Division in providing engineering, analysis, and planning for the modularization of off-board systems within the littoral warfare mission area, specifically for the Littoral Combat Ship (LCS) Mission Modules program. The scope of work encompasses systems engineering, sea frame integration of mission modules, packaging and handling of hardware, development of common computing environments and communications networks, and distributed engineering testing to support government validation and verification. The contract structure consists of a base year and four option years, with labor requirements estimated at 88,657 hours per year. Award will be determined based on best value, utilizing a tradeoff analysis between technical capability and total evaluated cost. Technical proposals are evaluated using adjectival ratings, while past performance is assessed on an acceptable or unacceptable basis. Performance is measured against specific objectives and quality standards, requiring compliance with ISO 9001:2015. All proposals must be submitted via the PIEE Solicitation Module by the December 3, 2026, deadline.
Engineering Services

POSTED

1 day ago

DEADLINE

in about 1 month
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS