Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!
logo

SOLENOID, ELECTRICAL

Active
SPE4A5-26-T-9491Federal
AI Contract Overview
Show more

This contract involves the procurement of 15 electrical solenoids, identified by NSN 5945-00-150-3034, for delivery to DLA Distribution in Cherry Point, North Carolina. The contract specifies a delivery timeframe of 171 days with an original required delivery date of January 9, 2028. The items must be packaged and marked in accordance with MIL-STD-2073-1E, MIL-STD-129, and specific DLA packaging and marking standards to ensure proper identification and preservation during shipment. Markings must conform to IPC/JEDEC J-STD-609 standards for lead finish identification on component packaging. Inspection and acceptance of the items will occur at the destination, with zero tolerance for nonconformance under the stipulated sampling plans outlined in MIL-STD-1916 or ASQ H1331. The contract incorporates technical and quality requirements from the DLA master list applicable as of the solicitation date. It includes provisions such as removal of government identification from non-accepted supplies and allows the manufacturer discretion in inspection methods. The document details strict adherence to quality assurance, source approval requests, measuring and test equipment, and packaging guidelines. Transportation and freight shipping are designated for DLA Distribution Cherry Point, with special attention to compliance with DLA procurement notes. Contact information for the contracting officer is provided for coordination, and all regulations related to unit of issue, markings, and sampling methodology are emphasized to maintain compliance with applicable federal and military standards.

General Info

Procurement of 15 solenoids, compliant packaging, delivery in 171 days to DLA Cherry Point.

Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

View Agency

NAICS

335314 - Relay and Industrial Control Manufacturing

View NAICS

Place of Performance

PHANTOM RD BLDG 147 BAY A, CHERRY POINT, NC, 28533-5040, US

Set-Aside

NONE
Documents(1)

SPE4A5-26-T-9491.pdf

PDF

AI Contract Breakdown
Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline
PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information
Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER OEM DIVISION
View Agency Profile
Office Address

US

Contacts

1 contact available

View Contacts

Start a free trial to view contact information.

Start Free Trial
Full Description
Show more
SOLENOID,ELECTRICAL
SOLENOID,ELECTRICAL
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RT001: MEASURING AND TEST EQUIPMENT
UNIT PACKAGE MARKING REQUIREMENT FOR COMPONENT LEAD FINISH
(a) In addition to all other marking requirements in this contract, the Contractor shall apply one of the assigned markings in accordance with paragraphs 5.3.1 and 5.3.2 of IPC/JEDEC J-STD-609, Marking and Labeling of Components, printed circuit boards (PCBs) and printed circuit board assemblies (PCBAs) to Identify Lead (Pb), Pb-Free and Other Attributes, to each individual unit pack of the item being acquired. Placement of the markings shall be in accordance with paragraph 6.2 of the standard.
(b) Copies of the current version of this standard may be purchased or downloaded from the Association Connecting Electronics Industry (IPC), http://www.ipc.org, http://www.ipc.org, or the Solid State Technology Association (JEDEC), http://www.jedec.org. http://www.jedec.org.
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SPE4A5-26-T-9491
SECTION B
CRITICAL APPLICATION ITEM
HAMILTON SUNDSTRAND CORPORATION 73030 P/N 37073
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7015853315 0001 EA 15.000
NSN/MATERIAL:5945001503034
DELIVERY (IN DAYS):0171
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:41 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:D3 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
UNIT PACKAGE MARKING REQUIREMENT FOR COMPONENT LEAD FINISH
(a) In addition to all other marking requirements in this contract, the Contractor shall apply one of the assigned markings in accordance with paragraphs 5.3.1 and 5.3.2 of IPC/JEDEC J-STD-609, Marking and Labeling of Components, printed circuit boards (PCBs) and printed circuit board assemblies (PCBAs) to Identify Lead (Pb), Pb-Free and Other Attributes, to each individual unit pack of the item being acquired. Placement of the markings shall be in accordance with paragraph 6.2 of the standard.
(b) Copies of the current version of this standard may be purchased or downloaded from the Association Connecting Electronics Industry (IPC), http://www.ipc.org, http://www.ipc.org, or the Solid State Technology Association (JEDEC), http://www.jedec.org. http://www.jedec.org.
PARCEL POST ADDRESS:
SW3113
SPE4A5-26-T-9491
SECTION B
PR: 7015853315 PRLI: 0001 CONT’D
DLA DISTRIBUTION CHERRY POINT
PHANTOM RD BLDG 147 BAY A
CHERRY POINT NC 28533-5040
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3113
DLA DISTRIBUTION CHERRY POINT
PHANTOM RD BLDG 147 BAY A
CHERRY POINT NC 28533-5040
US
Need Ship Date:09/06/2026 Original Required Delivery Date:01/09/2028
SPE4A5-26-T-9491 NSN/Part Number: 5945-00-150-3034 Quantity: 15 EA Purchase Request: 7015853315QTY: 15 Delivery: 171 days ADO

Similar Contracts

NAICS: 335314
New
Federal

Replace Switchgear Protective Relays Bldgs 10 & 43

The contract involves the replacement of switchgear protective relays in Buildings 10 and 43 under the project titled "Replace Switchgear Protective Relays Bldgs 10 & 43." It is managed by the Centers for Disease Control and Prevention (CDC) and was posted on March 11, 2026. The contracting process is currently at the forecast stage, with no solicitation number or set-aside type specified. Key contacts for the contract include Alita Kindred as the program point of contact and a contracting officer yet to be determined, both reachable via the provided email. The specifics regarding the location of the performance and detailed NAICS code are not listed, indicating that some logistical and classification details have yet to be finalized. The contract opportunity is accessible through the CDC’s Office of Small and Disadvantaged Business Utilization platform. This initiative is likely aimed at ensuring updated and reliable electrical protection systems in the designated facilities to maintain operational safety and efficiency.

Centers For Disease Control And Prevention

POSTED

2 days ago

DEADLINE

N/A

View Details
NAICS: 335314
New
Federal

59--SWITCH,FLOW

This solicitation seeks to procure 14 units of a flow switch (NSN 5930015704886), with deliveries designated for the DLA Distribution facility at location W1A8. The approved manufacturers for this item include sources 04034 604311 and 04034 FS-200-UE-LW-0.50-V-04.50-A-S. The procurement is being conducted through a Request for Quotation (RFQ), which is only available electronically, and quotes must likewise be submitted online by the specified deadline. No hard copies of solicitation documents, specifications, plans, or drawings will be provided. This procurement is classified as a combined type contract and is set aside exclusively for small businesses under SBA guidelines (FAR 19.5). The solicitation number is SPE7M826T2685, with a posting date of March 12, 2026, and responses due by March 23, 2026. The contract falls under NAICS code 335314 and is managed by the Defense Logistics Agency Land and Maritime office based in Columbus, Ohio. All responsible sources are encouraged to submit timely electronic quotes, and any inquiries related to the solicitation should be directed to the designated contracting officer via email as referenced in the official notice.

DLA Land And Maritime

POSTED

2 days ago

DEADLINE

in 9 days

View Details
NAICS: 335314
New
Federal

59--RELAY,ELECTROMAGNET

This contract involves the procurement of 18 units of an electromagnet relay, identified by the National Stock Number 5945013962526. The items are to be delivered to DLA Distribution Warner Robins within 168 days after order receipt. The solicitation is a Request for Quotations (RFQ), issued by the Department of Defense's DLA Land and Maritime office, with a total small business set-aside status under NAICS code 335314. Quotes must be submitted electronically by the deadline of March 23, 2026. No hard copies of the solicitation or related specifications, plans, or drawings are available, and all responsible sources may submit quotations, with timely submissions guaranteed consideration. The contract specifies approved sources for the relay as vendors identified by codes 89020 2122DH34NCC629 and 98897 697105-9. The solicitation documents can only be accessed online through the provided link, and any questions should be directed via email to the designated buyer contact. The procurement’s place of performance is unspecified beyond the general office location in Columbus, Ohio. This procurement is intended to support Department of Defense operations and emphasizes accessibility for small businesses under the federal acquisition regulations.

DLA Land And Maritime

POSTED

2 days ago

DEADLINE

in 9 days

View Details
NAICS: 335314
New
Federal

59--RELAY ASSEMBLY

This contract involves the procurement of 14 units of the relay assembly identified by NSN 5945016583402, with deliveries scheduled to the W1A8 DLA Distribution location within 168 days after order. The solicitation number for this request for quote (RFQ) is SPE7M526T8775 and is issued by the Defense Logistics Agency (DLA) Land and Maritime, under the Department of Defense. Quotes must be submitted electronically by the deadline of March 23, 2026. The solicitation is available online only and does not include hard copies, specifications, plans, or drawings. Only approved sources identified by codes 6Z538 1297-11-010 and 6Z538 PL1297-00-010 line item 6 are authorized to fulfill this order. The solicitation is open to all responsible sources who can provide timely quotes, which will all be considered. The applicable NAICS code is 335314, covering electrical equipment manufacturing. Inquiries about the solicitation should be directed to the designated buyer via email. The procurement’s place of performance details are not specified beyond general agency location information in Columbus, Ohio.

DLA Land And Maritime

POSTED

2 days ago

DEADLINE

in 9 days

View Details
NAICS: 335314
New
Federal

RELAY,THERMAL

This contract, titled "RELAY, THERMAL," issued by the Department of Defense’s Navsup Weapon Systems Support Mech office, involves a fixed-price procurement for repair parts under solicitation number N0010426QBN62 with a response deadline of April 13, 2026. It specifies compliance with multiple regulations and standards including item unique identification and valuation, inspection and acceptance procedures, and cybersecurity maturity model certification requirements. The contract emphasizes the precedence of Section "C" over Section "D" in case of conflict, and requires adherence to an established order of precedence for technical documentation and specifications. Vendors must maintain a government-acceptable quality assurance inspection system and retain inspection records, with stringent packaging requirements to meet cleanliness and safety protocols outlined in various military specifications. The contract mandates the exclusion of mercury in hardware and supplies, requires submission of certificates of compliance at material delivery, and outlines detailed instructions for handling distribution, approval, and inspection codes related to deliverables. Requests for deviations from technical or delivery requirements require justification and government approval prior to manufacture or delivery. Distribution statements are to be adhered to in line with Navy regulations to safeguard sensitive documents. The solicitation falls under NAICS code 335314, related to electrical equipment manufacturing, and is managed from Mechanicburg, PA, with primary points of contact provided. Overall, the contract defines rigorous technical, quality, and administrative controls to ensure compliance with government standards for the manufacturing and delivery of critical repair components.

Navsup Weapon Systems Support Mech

POSTED

2 days ago

DEADLINE

in about 1 month

View Details