Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

59--SOLENOID,ELECTRICAL

Active
SPE7M1-26-U-5990Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Department of Defense Maritime Supply Chain has issued Request for Quotations SPE7M1-26-U-5990 for the procurement of electrical solenids under NSN 5945014993825. This solicitation is a total small business set aside under NAICS code 332216. The requirement is for an initial quantity of 76 units to be delivered within 48 days after the order is placed. The procurement may result in an automated indefinite delivery contract with a one year term or until the aggregate total of orders reaches 350,000.00 dollars. The contract includes a guaranteed minimum quantity of 11 units and an estimated one order per year. Items are to be shipped to various CONUS and OCONUS DLA Depots via consolidation and containerization points. The approved source for this item is 88907 8M0185622. All quotes must be submitted electronically by the deadline of September 24, 2026. This is a unilateral indefinite delivery contract below the simplified acquisition threshold, and interested parties should refer to the DLA Master Solicitation for further technical and special requirements.

General Info

DoD seeks 76 electrical solenoids via small business set-aside, max value 350,000 dollars.

Agency

Department Of Defense → MARITIME SUPPLY CHAINView Agency

NAICS

332216 - Saw Blade and Handtool ManufacturingView NAICS

Place of Performance

OH

Set-Aside

SBA

Documents

(1)

SPE7M1-26-U-5990 Request for Quotations

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseCombined Synopsis
Posted

Combined Synopsis

Type Changed

Combined Synopsis → Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN
Contacts1 person available
OfficeCOLUMBUS, OH, 43218-3990, USA
Organization / Agency
Department Of Defense → MARITIME SUPPLY CHAIN
View Agency Profile
Office AddressCOLUMBUS, OH, 43218-3990, USA
Contacts
contact@example.gov

Full Description

Show more
Proposed procurement for NSN 5945014993825 SOLENOID,ELECTRICAL: Line 0001 Qty 76 UI EA Deliver To: By: 0048 DAYS ADO This Solicitation may result in an Automated IDC (Indefinite Delivery Contract). The term of the contract/order will be one year or until the aggregate total of orders placed against the contract/order reach 350000.00. The estimated number of orders per year is 1. The Guaranteed Minimum quantity will be 11. Items will be shipped to various CONUS and OCONUS (via consolidation and containerization point) DLA Depots. Approved source is 88907 8M0185622. The solicitation is an RFQ and will be available at the link provided in this notice. Hard copies of this solicitation are not available. Specifications, plans, or drawings are not available. All responsible sources may submit a quote which, if timely received, shall be considered. Quotes must be submitted electronically.

Similar Contracts

Same NAICS industry code

NAICS: 332216
New
DIBBS
WIRE, ELECTRICAL
Solicitation # SPE7M2-26-T-6625
This contract is a solicitation for the procurement of 3,500 units of electrical wire, identified by NSN 6145-01-699-7008 and part number HP3-EXBGE1. The requirement specifies 500 feet per spool and mandates adherence to NEMA HP3 Revision NR dated January 1, 2021. The procurement is conducted under full and open competition with a required delivery date of January 26, 2027, and a delivery window of 136 days after the order. The contract emphasizes strict packaging and shipping standards, requiring compliance with MIL-STD-2073-1E, MIL-STD-129, and MIL-DTL-12000. Specific attention is given to the Advice codes regarding continuous length requirements to ensure multiple unit packs are handled according to the designated code. Delivery is FOB Origin with inspection and acceptance occurring at the destination, specifically the DLA Distribution New Cumberland facility in Pennsylvania.
NUCLEAR REACTOR PROGRAM

POSTED

about 19 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332216
New
DIBBS
TOOL, INSTALLATION
Solicitation # SPE4A0-26-T-4696
This contract, identified as SPE4A0-26-T-4696, is for the procurement of one installation tool with NSN 5120-01-160-9510. The order is associated with Sikorsky Aircraft Corporation and requires adherence to specific DLA technical and quality requirements, including covered defense information and strict packaging standards per ASTM D3951 and MIL-STD-129. The contract specifies a delivery timeframe of five days and designates the inspection and acceptance points at the destination. The item is to be shipped to the LRC-A Illesheim facility in Germany. Quality control is governed by specific sampling plans, with Sikorsky Corporation's alternate plan being acceptable if it meets or exceeds ASQ H1331 or MIL-STD-1916 standards. Item Unique Identification is not required for this procurement. The original required delivery date is set for August 28, 2026.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 19 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332216
New
Federal
MX Tools - Snap On
Solicitation # FA469026Q0050
Solicitation FA469026Q0050 is a firm-fixed-price requirement for the procurement of brand-name Snap-On tools, including custom etching and foam shadowing, for delivery to Ellsworth AFB, South Dakota. The scope of work involves providing a specific set of tools as detailed in Exhibit A, which must be accompanied by custom-cut two-color foam tool shadow trays designed to fit Champion DW1500-060C-FTB toolboxes. A critical requirement is the laser etching of tools with a nine-digit Worldwide Identification number, with specific instructions that safety glasses must be etched on the frame rather than the lens. The contract is a total small business set-aside, with additional references to HUBZone and Service-Disabled Veteran-Owned Small Business concerns. The delivery period is established as 120 calendar days from the date of award receipt. For items with a unit acquisition cost of 5,000 dollars or more, the contractor must comply with strict Item Unique Identification (IUID) marking and reporting standards, including ISO/IEC 16022 and MIL-STD-130. Invoicing and payment will be processed electronically through the Wide Area WorkFlow (WAWF) system. Quotes must be submitted via email by 1:00 PM MDT on September 14, 2026, and must include a specification breakdown, a signed SF 1449, and completed representations and certifications. Award will be based on a best-value determination considering price and technical acceptability on a pass/fail basis.
FA4690 28 Cons Pkc

POSTED

1 day ago

DEADLINE

in 2 days
View Details
NAICS: 332216
New
DIBBS
51--HANDLE,EXTENSION,WRENC
Solicitation # SPE4A6-26-U-4172
Solicitation SPE4A6-26-U-4172 is a request for quotations issued by the Department of Defense ASC Commodities Division for the procurement of wrench extension handles, identified by NSN 5120999747623. This is a total small business set-aside procurement that may result in a unilateral indefinite delivery contract with a one-year term or until the aggregate total of orders reaches a maximum value of 350,000.00 dollars. The estimated annual quantity is 18 units, with a guaranteed minimum of one unit and a minimum delivery order quantity of 9 units. Quotes must be submitted electronically via DIBBS by September 25, 2026. The contract is fixed-price and requires delivery FOB Origin to various continental United States depots. Packaging must adhere to ASTM D3951 and RP001 standards, while marking and labeling must comply with MIL-STD-129 and the Hazard Communication Standard for any hazardous materials. Inspection and acceptance will occur at the destination. Payment processing is managed through the Wide Area WorkFlow system. The procurement includes specific compliance requirements for the Buy American Act, the Berry Amendment, and NIST SP 800-171 cybersecurity standards.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 13 days
View Details
NAICS: 332216
New
SLED
WRENCH, 3/8 X 7/16", SHORT, BOX END
Solicitation # INF-2026-0377
The City of Houston is soliciting bids for the procurement of a 3/8 x 7/16 inch short box end wrench, specifically identifying the Snap-on Model XS1214A 12-Point SAE Flank Drive Short 10 degree Offset Box Wrench as the standard. While this specific model is listed, the City will accept approved equals provided that the bidder submits descriptive literature including the manufacturer's name, product name, and product number. The contract will be awarded to the responsive and responsible bidder offering the overall low net bid meeting all specifications, though the City reserves the right to award based on individual items, combinations of items, or the overall best bid. Bidders must adhere to strict submission guidelines, using the provided bid documents and avoiding the use of company quotation forms with alternative terms. Required certifications include representations of being an equal opportunity employer, non-collusion, and compliance with Texas Government Code regarding boycotts of Israel, energy companies, and firearm entities, as well as zero tolerance for human trafficking. Delivery terms are FOB destination as specified on individual purchase orders, and the bidder must state the proposed delivery time in calendar days. Payment is due thirty days after the City approves the invoice or accepts the goods, whichever occurs later.
City of Houston

POSTED

2 days ago

DEADLINE

in 4 days
View Details
NAICS: 332216
New
DIBBS
Supply of Socket Head Screw Keys (NSN 5120016191196)
ASC COMMODITIES DIVISION

POSTED

2 days ago

DEADLINE

in 6 days
View Details
NAICS: 332216
New
DIBBS
Supply of Electrical Power Cable (NSN 6145016669522)
MARITIME SUPPLY CHAIN

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 332216
New
DIBBS
Socket Wrench Adapter Supplier
ASC COMMODITIES DIVISION

POSTED

2 days ago

DEADLINE

in 6 days
View Details
NAICS: 332216
New
DIBBS
YOKE, MECHANICAL PULLER
Solicitation # SPE4A6-26-T-28TX
Solicitation SPE4A6-26-T-28TX is a fixed-price request for quotations issued by the DLA Aviation ASC Commodities Division for the procurement of 15 mechanical puller yokes, identified by NSN 5120-01-484-3217. The delivery is set for 128 days after award, with a required delivery date of September 10, 2026, shipped FOB Origin to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. This procurement prohibits the use of additive manufacturing processes and requires compliance with the Buy American Act and Berry Amendment. The contract mandates strict quality and safety standards, including zero-based sampling plans per MIL-STD-1916 or ASQ H1331 and adherence to NAVSEA 5100-003D regarding mercury containment. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129. Technical data is subject to ITAR or EAR export controls, requiring contractors to have approved JCP certification. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and a price evaluation preference for SBA-certified HUBZone small business concerns. Inspection and acceptance will occur at the destination per FAR 52.246-2.
ASC COMMODITIES DIVISION

POSTED

2 days ago

DEADLINE

in 6 days
View Details
NAICS: 332216
New
DIBBS
ADAPTER, SOCKET WRENCH
Solicitation # SPE4A6-26-T-28VM
Solicitation SPE4A6-26-T-28VM, issued by the DLA Aviation ASC Commodities Division, is a request for quotations for 12 units of socket wrench adapters, identified by NSN 5120017380513. The procurement is categorized under NAICS code 332216 and requires delivery within 20 days after receipt of order, with an original required delivery date of August 25, 2026. Shipping is designated as FOB Origin, with the destination for both inspection and acceptance located at the DLA Distribution Albany facility in Georgia. The contract mandates strict adherence to quality and packaging standards, including ASTM D3951 and DLA Packaging Requirements for Procurement (RP001), with all labeling following MIL-STD-129. Quality assurance is governed by MIL-STD-1916 or ASQ H1331, requiring zero non-conformances for acceptance. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for electronic invoicing and payment. Offerors must comply with various FAR and DFARS clauses, including the Buy American Act, safeguarding of covered defense information per DFARS 252.204-7012, and prohibitions on the use of additive manufacturing unless specifically authorized. Quotes must be submitted via the DIBBS portal by September 18, 2026.
ASC COMMODITIES DIVISION

POSTED

2 days ago

DEADLINE

in 6 days
View Details
NAICS: 332216
New
DIBBS
MAGNET WIRE
Solicitation # SPE7M1-26-T-333Y
This contract is for the procurement of magnet wire, specifically part number MW020CHX105105UNC under NSN 6145016796484. The order consists of two reels, with each reel weighing 65 lbs. The procurement is subject to full and open competition and must adhere to NEMA MW1000 Revision NR standards and DLA technical and quality requirements. Delivery is required within 168 days, with a need ship date of March 9, 2027, and an original required delivery date of December 8, 2026. The items are to be delivered FOB Origin to the DLA Distribution Depot Hill in Utah. Strict packaging and marking guidelines apply, including the use of orientation arrows and specific stenciled warnings stating that the sensitive material must not be laid on its side. Inspection and acceptance will occur at the destination.
MARITIME SUPPLY CHAIN

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 332216
New
DIBBS
INSTALLATION AND EQUIP
Solicitation # SPE7L5-26-T-5405
Solicitation SPE7L5-26-T-5405 is a request for quotations issued by DLA Land and Maritime for the procurement of three vehicle installation and equipment kits, specifically identified as critical application items with part number 3709746 from Oshkosh Defense LLC and NSN 2540015408657. The procurement is categorized under NAICS code 332216. Delivery is required within 168 days after order, with a need ship date of March 9, 2027, and an original required delivery date of May 20, 2027. The items are to be delivered FOB Origin to DLA Distribution San Joaquin in Tracy, California, where both inspection and acceptance will occur. The contract mandates strict adherence to DLA Master List of Technical and Quality Requirements, which take precedence over ASTM D3951 for non-hazardous commercial packaging. All shipments must be marked and labeled according to MIL-STD-129, and palletization must follow RP001 requirements. For hazardous materials, suppliers must comply with FED-STD-313, TQ requirement IP025, and the Hazard Communication Standard under 29 CFR 1910.1200, including the submission of Safety Data Sheets. Administrative requirements include electronic invoicing through the Wide Area Workflow system and compliance with the Buy American Act, the Berry Amendment, and NIST SP 800-171 assessment requirements.
LAND SUPPLIER OPNS ENGINES

POSTED

2 days ago

DEADLINE

in 9 days
View Details

More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN

Same awarding agency

NAICS: 423610
New
DIBBS
Supplier of Electronic Component (NSN 5998-01-633-7355)
Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

about 19 hours ago

DEADLINE

in 4 days
View Details
NAICS: 333996
New
DIBBS
Supply of Rotary Pump Idlers (NSN 4320-01-310-0465)
Fluid Power Pump and Motor Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 9 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, PLUG, ELECTRI
Solicitation # SPE7M1-26-U-5585
Solicitation SPE7M1-26-U-5585, issued by DLA Land and Maritime, is for the procurement of electrical plug connectors under NSN 5935011078814. The requirement is for an estimated quantity of 147 units, with a contract maximum value of 350,000.00 dollars. This is an Indefinite Delivery Contract for a one year period, utilizing a simplified acquisition process. Delivery is required within 94 days after receipt of order, with shipping terms based on FOB Origin under the First Destination Transportation program. Inspection and acceptance will occur at the destination. The items are classified as critical application items and must comply with basic specification MS27467M(1) and reference specification MIL-DTL-38999N(1). This is a qualified item subject to the Qualified Products List for Federal Stock Class 5935. Specific quality restrictions prohibit the use of materials manufactured by Bendix Corporation (CAGE 77820) with lot date codes from January 1977 through February 1984. Additionally, the use of Class I ozone-depleting substances is prohibited without written approval. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129. Removable crimp type contacts must not be installed in the connector insert but must be placed in a close fitting noncorrosive rigid container within the unit container, labeled with current and superseded part numbers per SAE-AS39029. Hazardous materials must be labeled according to the Hazard Communication Standard. Payment and invoicing will be processed electronically through the Wide Area Workflow system.
Electronic Connector Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 4 days
View Details
NAICS: 335312
New
DIBBS
REGULATOR, CURRENT
Solicitation # SPE7M1-26-T-321C
This solicitation, identified as SPE7M1-26-T-321C, is issued by the Department of Defense Maritime Supply Chain for the procurement of three current regulators. The items are identified by NSN 6110-01-673-7762 and part number 508-00248-50 from Kato Engineering Inc. This is a total small business set-aside under NAICS code 335312. The contract specifies a delivery timeframe of 214 days after order, with a required delivery date of April 14, 2027. The procurement is governed by DLA master technical and quality requirements, including specific packaging standards under RP001 and marking requirements per MIL-STD-129. Delivery is set as FOB Origin, with both inspection and acceptance occurring at the destination. The designated shipping and delivery location is DLA Distribution San Joaquin in Tracy, California. The solicitation was posted on August 31, 2026, with a response deadline of September 11, 2026.
Motor and Generator Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332911
New
DIBBS
VALVE, SOLENOID
Solicitation # SPE7M1-26-T-321M
This contract is for the procurement of 16 corrosion resistant steel solenoid valves with flanged ends and 28 V DC power specifications. The items are identified by NSN 4810011185011 and part number 2990-9586 from Circor Aerospace, Inc. This is a restricted source item requiring engineering source approval by the government design control activity. The contract prohibits the use of Class I ozone depleting chemicals and mandates compliance with DLA packaging and marking standards, specifically MIL-STD-2073-1E and MIL-STD-129. The order is under solicitation SPE7M1-26-T-321M with a required delivery date of September 2, 2026, and a delivery timeframe of 5 days. Shipping is FOB Origin, with the final destination being the General Depot of Naval Supplies in Kaohsiung City, Taiwan. Inspection and acceptance will occur at the point of origin. This acquisition is designated as a total small business set-aside under NAICS code 332911 for the Maritime Supply Chain agency within the Department of Defense.
Industrial Valve Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332911
New
DIBBS
VALVE, SOLENOID
Solicitation # SPE7M1-26-T-321R
This contract is for the procurement of one corrosion resistant steel solenoid valve with flanged ends and a 28 V DC power specification. The item is identified by NSN 4810011185011 and part number 2990-9586 from Circor Aerospace, Inc. As a restricted source item, it requires engineering source approval by the government design control activity. The contract strictly prohibits the use of Class I ozone depleting chemicals in the manufacturing or delivery of the item. The delivery is set for five days after receipt of order with a required delivery date of September 2, 2026. Shipping is FOB Origin and the destination is the General Depot of Naval Supplies in Kaohsiung City, Taiwan. Compliance with DLA packaging requirements, MIL-STD-2073-1E, and MIL-STD-129 marking standards is mandatory. Inspection and acceptance will take place at the point of origin.
Industrial Valve Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 4 days
View Details
NAICS: 333998
New
DIBBS
PARTS KIT, FLUID PRESSU
Solicitation # SPE7M1-26-U-5566
Solicitation SPE7M1-26-U-5566 is a total small business set-aside for an indefinite delivery contract with a one year period, issued by the Defense Logistics Agency for the procurement of fluid pressure filter parts kits. The requirement specifies General Motors LLC 7X677 part number 24210956, with an estimated annual quantity of 3,515 units and a guaranteed contract minimum of 527 units. The contract has a maximum value of 350,000 dollars and requires a delivery period of 81 days. The government reserves the right to make multiple awards, with the best value offeror receiving at least 60 percent of the total requirement. Technical compliance requires adherence to DLA master lists and specific packaging standards, including MIL-STD-2073-1 Appendix D for kits and MIL-STD-129 for marking. Inspection and acceptance will occur at the destination, utilizing sampling methods such as MIL-STD-1916 or ASQ H1331. Offerors must submit quotes via DIBBS and are prohibited from using additive manufacturing processes unless authorized. The contract incorporates various FAR and DFARS clauses, including requirements for combating trafficking in persons, safeguarding covered defense information, and compliance with the Buy American Act. Payment and invoicing must be processed through the Wide Area WorkFlow system.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 4 days
View Details
NAICS: 444180
New
DIBBS
ELECTRONIC COMPONEN
Solicitation # SPE7M1-26-T-288Q
This solicitation from the Department of Defense Maritime Supply Chain is for the procurement of two electronic components, identified by NSN 5998-01-633-7355 and part number 500880-320. The contract requires delivery to be completed within 20 days after the order is placed, with the delivery, inspection, and acceptance points all set as destination. The agreement mandates strict adherence to DLA packaging requirements and MIL-STD-129 marking standards. It specifically requires a CMMC Level 2 self-assessment and the protection of covered defense information. Additionally, the supplier must provide technical data to verify electrostatic sensitive device and electromagnetic interference requirements to ensure proper packaging.
Other Building Material Dealers

POSTED

about 19 hours ago

DEADLINE

in 4 days
View Details
NAICS: 333996
New
DIBBS
PUMP UNIT, RECIPROCATIN
Solicitation # SPE7M1-26-Q-1492
Fluid Power Pump and Motor Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333996
New
DIBBS
HOUSING, LIQUID PUMP
Solicitation # SPE7M1-26-Q-1487
Fluid Power Pump and Motor Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 9 days
View Details
New
DIBBS
PUMP, AXIAL PISTONS
Solicitation # SPE7M1-26-Q-1485

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332613
New
DIBBS
MISCELLANEOUS
Solicitation # SPE7M1-26-R-0010
DLA Land and Maritime is soliciting the procurement of 243 units of Spring Wire Support, part number 402111-2 (NSN 1710-006263917), under a total small business set-aside. The requirement is governed by FAR Part 15 and is evaluated based on best value, considering price, past performance, and delivery. The items are to be shipped to DLA Distribution Puget Sound in Bremerton, Washington, with a required delivery time of 300 days. Terms are FOB Origin, with inspection and acceptance also occurring at the origin. The procurement involves high technical standards, including mandatory engineering source approval, SAE AS9100 quality system compliance, and NDT accreditation. Deliverables include First Article Testing, Production Test and Inspection Reports, and Certificates of Quality Compliance. Strict adherence to MIL-STD-129 for marking and MIL-STD-2073-1E for packaging is required, with specific mandates for serialization and traceability of Critical Application Items. Additionally, contractors must maintain JCP certification to access export-controlled technical data and meet CMMC Level 2 cybersecurity requirements.
Spring Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 26 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 650+ contractors already using CLEATUS