This Solicitation opportunity from Department Of Defense was posted on September 17, 2025. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Solicitation for the Starter, Engine, HYDR

Closed

W58RG-25-B-0028Federal

Submission Closed10/22/2025, 08:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 336412

New

Federal

29--VALVE,RELIEF,FUEL, IN REPAIR/MODIFICATION OF

Solicitation # N0038327QHA02

This presolicitation notice from the Navsup Weapon Systems Support for the Department of Defense concerns the repair or modification of ten fuel relief valves under NSN 7R-2915-012016004-EK and TDP version 010. The procurement is intended to be a single-source negotiation under FAR 6.302-1, though interested parties may submit capability statements or proposals within 45 days of publication, or 30 days if awarded under the existing Basic Ordering Agreement N0038324GBN01. Delivery is specified as FOB Origin, and the government will accept early and incremental deliveries. Contractual documents will be issued via mail, facsimile, or electronic methods. Technical specifications and standardized documents are available through the DoD Single Stock Point or the ASSIST-Online portal. The government has determined that FAR Part 12 policies for commercial items will not be used, although interested parties have 15 days to notify the contracting officer if a commercial item can satisfy the requirement. The primary point of contact for this action is Thomas S. McLaughlin.

Navsup Weapon Systems Support

POSTED

DEADLINE

Supply of Fuel Control Needle Valves (NSN 2915-00-248-5801)

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Supply of Compressor Case Plugs (P/N 50N580)

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Supply of Jet Assembly, Compressor (Rolls-Royce P/N 6786353)

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Supply of Valve Disk (NSN 2915-01-528-5417)

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Solicitation # SPE4A7-27-T-1569

Solicitation SPE4A7-27-T-1569 is a fixed-price procurement issued by the Defense Logistics Agency for five units of Cover Assembly, Mete, identified by NSN 2915011735343. This procurement is designated as an Air Force Critical Safety Item and requires production in accordance with TDP Rev A Gen 8 and reference drawing NR 13873 EI-011735343. The delivery timeline for the primary items is 263 days, with an FOB Origin designation for both inspection and acceptance. A critical requirement of this contract is the First Article Test, which requires the delivery of three units to Tinker Air Force Base within 30 calendar days of the contract date for government testing. The contractor must maintain a quality management system compliant with SAE AS9100 and adhere to strict sampling methods, including zero-based sampling plans. Packaging must comply with ASTM D3951 and MIL-STD-129, and all payment requests must be processed through Wide Area WorkFlow. Offerors must comply with domestic material restrictions, including the Buy American Act and the Berry Amendment, and are prohibited from using additive manufacturing processes unless specifically authorized. The solicitation also mandates compliance with CMMC Level 2 self-assessment and DFARS cybersecurity reporting requirements. Small business joint ventures must provide specific socioeconomic representations, and all offerors must certify they will not provide covered telecommunications equipment or services.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

ADAPTER, INPUT, CONTR

Solicitation # SPE4A7-27-R-X044

Solicitation SPE4A7-27-R-X044 is an Indefinite Delivery Contract issued by the DLA Weapons Support ASC Supplier Oper AE and AF Div for the procurement of an Engine Control Input Assembly Adapter (NSN 1560-01-101-9743). This is a total small business set-aside for a Navy-identified Critical Safety Item. The contract requires a total delivery period of 780 days after receipt of order, which includes specific timelines for production, government production lot testing evaluation, and final delivery to MCAS Cherry Point, North Carolina. The award will be based on a best-value trade-off assessment, with significant weight placed on past performance, specifically SPRS assessments and historical quality and delivery compliance. The contractor must adhere to stringent quality and security standards, including CMMC Level 2 certification and compliance with ITAR and EAR export controls. Technical data access is restricted to approved US/Canada Joint Certification Program participants. Packaging and marking must strictly follow MIL-STD-129 and MIL-STD-130 for unique item identification. Inspection occurs at the source, while acceptance is at the destination. Payment and invoicing are processed through the Wide Area Workflow (WAWF) system. Offerors must submit quotes via email and maintain active registration in the System for Award Management.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Solicitation # SPE4A7-27-T-1601

Solicitation SPE4A7-27-T-1601 is a request for one Valve Disk, identified as NSN 2915-01-528-5417 and designated as a Navy Identified Critical Safety Item. The procurement is managed by the DLA Weapons Support ASC Supplier Oper AE and AF Div, with a required delivery of 160 days after order, targeting a ship date of April 6, 2027. Delivery is set as FOB Origin to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. All quotes must be submitted via the DLA Internet Bid Board System (DIBBS). Offerors are encouraged to provide quantity ranges to accommodate volatile demand and must provide details regarding dealer or distributor certifications. The contract mandates strict adherence to quality and material standards, including SAE AS9100 for quality management and MIL-STD-2073-1E and MIL-STD-129 for packaging and marking. Compliance with the Buy American Act and the Berry Amendment is required, and any use of non-domestic materials must be disclosed. Notably, items produced via additive manufacturing are prohibited unless specifically authorized. The award process involves origin inspection and acceptance, with sampling conducted per MIL-STD-1916 or ASQ H1331. Payment and invoicing must be processed through the Wide Area WorkFlow (WAWF) system, and contractors must register via the Account Management and Provisioning System (AMPS) to maintain access to the Vendor Shipment Module.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Solicitation # SPE4A5-27-T-1456

Solicitation SPE4A5-27-T-1456 is a fixed-price procurement issued by the DLA Weapons Support ASC Supplier Oper OEM Division for 11 units of fuel control needle valves, identified by NSN 2915002485801 and Honeywell International Inc part number 2520441. The contract requires delivery to DLA Distribution Cherry Point in North Carolina, with a need ship date of April 13, 2027, and an original required delivery date of November 10, 2027. Shipping is designated as FOB Origin, with inspection and acceptance occurring at the destination. The procurement is subject to rigorous quality and technical standards, including ISO 9001:2015 compliance and sampling methods per MIL-STD-1916 or ASQ H1331. Packaging must adhere to ASTM D3951 and MIL-STD-129, with DLA Master List requirements taking precedence. Key regulatory compliance includes the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 for safeguarding covered defense information. Invoicing and payment must be processed electronically through the Wide Area Workflow system. Item Unique Identification is not required for this specific order.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Solicitation # SPE4A5-27-T-1475

Solicitation SPE4A5-27-T-1475 is issued by the DLA Weapons Support ASC Supplier Oper OEM Division for the procurement of three baffles, identified by NSN 2915011829369 and Woodward Inc. part number 3415-066. This item is designated as an Air Force Critical Safety Item, requiring strict adherence to quality standards including SAE AS9100 and zero-based sampling plans. The delivery is set for 297 days after award, with a need ship date of August 21, 2027, and a final required delivery date of October 31, 2027. Shipping is FOB Origin to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. Offerors must submit quotes via DIBBS and are encouraged to provide quantity ranges to accommodate demand volatility. Compliance with the Buy American Act, the Berry Amendment, and domestic material restrictions is mandatory, and any non-domestic materials must be disclosed. The contract requires the use of the Wide Area WorkFlow system for invoicing and mandates that contractors register via the Account Management and Provisioning System to access the Vendor Shipment Module. Additionally, offerors must certify they do not provide covered telecommunications equipment and must comply with CMMC Level 2 self-assessment and safeguarding requirements for covered defense information.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

GUIDE AND INSERTS, SERV

Solicitation # SPE4A5-27-T-1453

Solicitation SPE4A5-27-T-1453 is a fixed-price request for quotations issued by the DLA Weapons Support ASC Supplier Oper OEM Division for the procurement of 17 units of servo guides and inserts, identified by NSN 2915000754020 and part number 583013 from Ontic Engineering & Manufacturing, Inc. This item is designated as an Air Force Critical Safety Item, requiring strict adherence to quality management standards such as SAE AS9100 for manufacturers or AS9120 for distributors. The delivery is required within 160 days after receipt of the order, with a need ship date of April 6, 2027, and a final delivery location at Tinker AFB, Oklahoma. Inspection and acceptance will occur at the point of origin. Offerors must submit quotations via the DIBBS portal by October 27, 2026, and are encouraged to provide quantity ranges to accommodate volatile demand. Compliance with the Buy American Act and the Berry Amendment is mandatory, with a reduced threshold of 150,000 dollars for the latter. The contract mandates the use of the Wide Area WorkFlow system for invoicing and requires registration via the Account Management & Provisioning System for Vendor Shipment Module access. Additionally, the solicitation prohibits the use of additive manufacturing unless specifically authorized and requires representations regarding the non-provision of covered telecommunications equipment. Evaluation may be conducted via an automated award process.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

SCREW, CAP, HEXAGON HEAD

Solicitation # SPE4A6-27-T-5305

Solicitation SPE4A6-27-T-5305 is a federal procurement issued by the DLA Weapons Support ASC Commodities Division for the acquisition of hexagon head cap screws, identified by NSN 5305016263300. The requirement consists of two packages to be delivered FOB Destination to the USS Richard M McCool Jr LPD 29 at FPO AE 09591. The required delivery date is October 14, 2026, with a delivery timeframe of 20 days after award. Inspection and acceptance will occur at the destination. The contract mandates strict adherence to quality and technical standards, including sampling per MIL-STD-1916 or ASQ H1331 and packaging according to ASTM D3951 and MIL-STD-129. Special environmental restrictions prohibit the intentional addition of mercury, except as specified by NAVSEA 5100-003D. Administrative requirements include electronic invoicing via Wide Area WorkFlow and compliance with various FAR and DFARS clauses regarding cybersecurity, safeguarding covered defense information, and the Buy American Act. The solicitation is categorized under NAICS code 336412.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 22 hours ago

DEADLINE

in 7 days

AI Contract Overview

This contract is a total small business set-aside issued by the Department of the Army at Redstone Arsenal, Alabama, for the inspection and overhaul of Engine Hydraulic Starters, with National Stock Number 2995-01-076-7732 and Part Number 420078. The scope requires the contractor to provide all necessary services, labor, equipment, materials, and data to perform maintenance in accordance with government specifications, specifically adhering to Depot Maintenance Requirement DMWR 55-2995-108, with the latest revision dated December 9, 2013. The contract is a five-year firm-fixed-price, indefinite delivery/indefinite quantity arrangement, with an anticipated minimum of 20 and a maximum of 312 units, including up to 52 units for Foreign Military Sales. This opportunity uses NAICS code 336412 with a 1,500 employee size standard and is exclusively for small businesses. Foreign interest in submitting a proposal must do so through official embassy channels. The contract is not for a critical safety item, and all responsible sources can submit proposals for consideration. It is currently unfunded, and award will only proceed once sufficient funding is secured. Key contacts for the solicitation include Johnnie L. Wright and Charles R. Miller at the Redstone Arsenal office. The estimated proposal response deadline is October 22, 2025, although solicitation posting may be adjusted based on funding and internal timelines.

General Info

Five-year small business contract for Hydraulic Starter inspection and overhaul at Redstone Arsenal.

Agency

Department Of Defense → W6QK Acc-Rsa

NAICS

336412 - Aircraft Engine and Engine Parts Manufacturing

Place of Performance

Redstone Arsenal, AL, USA

Set-Aside

SBA

Documents

Contractor Overhaul TAV-C Requirements and End User SOP

18 pages · specifications

High

Document List Summary - M394-01 (Starter, Engine, Hydr)

1 page · specifications

High

Exhibit A - CDRL A001 M394-01

3 pages · cdrl

High

Exhibit B - CDRL A002 M394-01

3 pages · cdrl

High

Exhibit C - CDRL A003 M394-01

3 pages · cdrl

High

M&O Packaging Requirements - M394-01 (Engine Starter)

1 page · specifications

High

Pricing Template - Starter Engine Hydr

7 pages · specifications

High

Solicitation W58RGZ-25-B-0028 - Starter Engine Hydr M&O

ifb

High

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseClosed

PostedSep 17

Solicitation

Response DeadlineOct 22

Deadline has passed

Submission Closed

10/22/2025, 08:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → W6QK Acc-Rsa

Contacts2 people available

OfficeREDSTONE ARSENAL, AL, 35898-0000, USA

Organization / AgencyDepartment Of Defense → W6QK Acc-Rsa

Office AddressREDSTONE ARSENAL, AL, 35898-0000, USA

Contacts

Johnnie L. Wright

Charles R. Miller

Full Description

This is a 100% Small Business Set-Aside. The Contractor shall furnish all services, facilities, labor, parts, materials, equipment, tools, and data necessary to accomplish the inspection and overhaul for the following assets: NOMENCLATURE: Starter, Engine, HYDR Input NSN/Output NSN: 2995-01-076'7732 Input PN/ Output PN: 420078 ESTIMATED QTY Range: 20 Minimum - 312 Maximum)(Maximum includes a Foreign Military Sales (FMS) quantity of 52 each) The applicable North American Industry Classification System (NAICS) code is 336412 and the size standard is 1,500 employees. The proposed contractual action is a five (5) year, Firm-Fixed-Price (FFP) Indefinite Delivery Indefinite Quantity (IDIQ) maintenance and overhaul contract. The Starter, Engine Hydr is not a Critical Safety Item (CSI). Depot Maintenance Requirement (DMWR)55-2995-108, Revision date 12/09/2013, Change #0.) has been identified for this requirement. The overhaul shall be accomplished in accordance with Government specifications. Foreign firms are reminded that all requests for solicitation must be processed through their respective embassies. All responsible sources may submit a proposal which shall be considered by the Agency. This requirement is currently unfunded. Award will be withheld pending receipt of sufficient funds. The closing date annotated is an estimate and may be adjusted dependent upon the date the solicitation is released; however, the solicitation will not post prior to the closing date stated above.