Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →

Multiple Award LTC for NSN 3H 4220 015695520

Active
N0010426RZ057Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is a multiple award indefinite-delivery/indefinite-quantity agreement for the procurement of Submarine Escape Suits, identified by NSN 3H 4220 015695520, issued under solicitation N0010426RZ057 by the Naval Supply Systems Command Weapon Systems Support. Only two approved sources are designated to supply these specialized suits, ensuring strict control over quality and availability for submarine crew safety. The solicitation was posted on June 17, 2026, with responses due by July 2, 2026, and is categorized as a presolicitation with no set-aside provisions, meaning all eligible contractors may respond regardless of business size or classification. The North American Industry Classification System code 326299 applies, indicating manufacturing of other rubber products, and the activity is managed by the Department of Defense through the office located in Mechanicsburg, Pennsylvania. Primary point of contact for the opportunity is Michael Thoman, reachable via email at michael.thoman1@navy.mil or by phone at 717-605-4608, who oversees all inquiries and submissions related to this acquisition. The place of performance is unspecified, but procurement will support naval operations requiring certified escape equipment. This contract aims to maintain a reliable, pre-vetted supply chain for mission-critical safety gear, with awards expected to be made to the two qualified vendors following evaluation of submitted proposals against technical and logistical criteria. All interested parties must comply with federal procurement regulations and submit responses prior to the deadline to be considered.

General Info

Multiple Award LTC for Submarine Escape Suits by two vendors, DoD solicitation, open to qualified bidders.

Agency

Department Of Defense → Navsup Weapon Systems Support MechView Agency

NAICS

326299 - All Other Rubber Product ManufacturingView NAICS

Place of Performance

PA

Set-Aside

NONE

Documents

(2)

3.02_RFP_N0010426RZ057.pdf

PDF

NIIN+015695520+Buy+Version007.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Sources Sought

Type Changed

Sources Sought → Presolicitation

Type Changed

Presolicitation → Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Navsup Weapon Systems Support Mech
Contacts2 people available
OfficeMECHANICSBURG, PA, 17050-0788, USA
Organization / Agency
Department Of Defense → Navsup Weapon Systems Support Mech
View Agency Profile
Office AddressMECHANICSBURG, PA, 17050-0788, USA

Full Description

Show more

This requirement is for a Long Term Contract (LTC) that will be in support of the Survival and Escape Program.


NSN 3HD 4220-01-569-5520
SUBMARINE ESCAPE IM
P/N: SEIE MK11

Similar Contracts

Same NAICS industry code

More opportunities from Department Of Defense → Navsup Weapon Systems Support Mech

Same awarding agency

NAICS: 334290
New
Federal
ELECTRONIC TIMING G
Solicitation # N0010426QYA7C
This contract pertains to the repair of the ELECTRONIC TIMING G under a fixed-price, government solicitation issued by the Naval Supply Systems Command Weapon Systems Support Mechanicsburg, with solicitation number N0010426QYA7C. The repair must adhere to strict technical and quality standards, including compliance with MIL-STD-129 for marking, and all work must follow the contractor’s approved repair procedures, manufacturer’s drawings, and technical orders. The item must be free from mercury and any mercury contamination, with explicit prohibitions against its use unless prior written approval is obtained, including detailed justification and installation of a warning plate if required. Performance is subject to Government Source Inspection, and the contractor is responsible for all quality assurance, inspection, and recordkeeping for 365 days after final delivery. The repair turnaround time is measured from the physical receipt of the asset at the contractor’s facility, as recorded in the Commercial Asset Visibility system, and acceptance must be completed within the specified timeframe. The contract requires FOB Origin freight terms, bilateral award execution, and submission of a detailed quote including unit and total pricing, RTAT, and an informal cost breakdown if applicable. The awardee must provide CAGE codes for the primary facility, inspection location, and any subcontractor used. The contract enforces multiple federal compliance requirements including the Buy American Act, Small Business Set-Aside provisions, and Security Prohibitions under recent deviations effective February 2026. A Small Business Subcontracting Plan is required, and the solicitation is set aside exclusively for small businesses. Contractors must comply with Wide Area Workflow payment instructions and submit invoice and receiving reports in the designated format. Return Material Authorizations are to be referenced when applicable, and any design, material, or part number changes must be preceded by written Government approval using a specified coding system. All documentation referenced, including MIL-STD-2073 for packaging and MIL-STD-129 for marking, must be obtained and followed. Verification of nomenclature, part numbers, and NSNs is critical before submission, and all responses must be submitted prior to the deadline. The point of contact for technical and procurement inquiries is listed with a direct email and phone number, and all submissions must be made through the official SAM.gov portal.
Other Communications Equipment Manufacturing

POSTED

1 day ago

DEADLINE

in 29 days
View Details
NAICS: 334412
New
Federal
CIRCUIT CARD ASSEMB
Solicitation # N0010426QQB96
This contract pertains to the repair of CIRCUIT CARD ASSEMBLY items under a fixed-price arrangement, with a mandatory Repair Turnaround Time (RTAT) of 60 days measured from the physical receipt of the asset at the contractor’s facility as recorded in the Commercial Asset Visibility (CAV) system. All repairs must adhere to strict technical standards including IPC J-STD-001 Class 3 soldering requirements, ANSI/ESD S20.20 for electrostatic discharge control, and MIL-STD-130 Rev N for item marking. The contractor is responsible for full inspection and testing in accordance with original manufacturer specifications and must maintain complete records for 365 days after final delivery. Government Source Inspection is required, and freight is FOB Origin with Navy handling logistics per the CAV Statement of Work. Any failure to meet the 60-day RTAT results in a per-unit, per-month price reduction, capped at a specified maximum, without precluding the Government’s right to terminate for default. The contract includes several critical compliance clauses such as mandatory Use of Workflow Pro (WFP) Mod Assist, Cybersecurity Maturity Model Certification requirements, Buy American Act compliance, and a Small Business Subcontracting Plan. The award will be issued bilaterally upon signed contractor acceptance, and contractors must validate part numbers, NSNs, and nomenclature prior to submission. Pricing must be justified through historical data or commercial market comparisons if the item is not previously purchased by NAVSUP WSS or if prices have increased. An option for increased quantity may be exercised within 365 days of the base contract. Only authorized distributors of the original manufacturer may bid, requiring proof of authorization on company letterhead. All technical documents referenced are governed by distribution statements under OPNAVINST 5510.1, with NOFORN and Official Use Only documents requiring special approval. The CAGE code, inspection location, and facility details must be provided, and a T&E fee not-to-exceed limit is established for items deemed beyond repair.
Bare Printed Circuit Board Manufacturing

POSTED

1 day ago

DEADLINE

in about 2 months
View Details