Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Solicitation_Ammunition Container

Active
W912CH-25-R-0201Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The United States Army Contracting Command – Detroit Arsenal is soliciting a five-year, Firm-Fixed Price Requirements Contract for the Ammunition Container, identified by NSN 1095-01-583-7967 and Part Number 13023133. This solicitation is exclusively set aside for small businesses under the Total Small Business Set-Aside category, with NAICS code 332439. Access to the Technical Data Package (TDP) is strictly controlled and requires certification under the United States/Canada Joint Certification Program (JCP), as the TDP is classified as EXPORT CONTROLLED, Distribution D. Bidders must obtain JCP certification and request TDP access through SAM.gov prior to submission. The contract mandates Military Packaging – Level B and adherence to specific Special Packaging Instructions detailed in Section D of the solicitation. All communications, amendments, and updates will be issued electronically, and prospective offerors are solely responsible for monitoring the solicitation page on SAM.gov to ensure compliance with any changes. Proposals must be submitted by the deadline of August 6, 2026, at 5:00 PM Eastern Time; failure to respond to amendments or meet all requirements will result in rejection. Questions must be directed to Contract Specialist Ryan Nawrocki at ryan.d.nawrocki.civ@army.mil, with Richard Hall listed as a secondary point of contact. The office is located in Warren, Michigan.

General Info

Five-year small business contract for ammunition containers, requiring Joint Certification Program clearance.

Agency

Department Of Defense → W6QK Acc- DtaView Agency

NAICS

332439 - Other Metal Container ManufacturingView NAICS

Place of Performance

MI, USA

Set-Aside

SBA

Documents

(4)

Solicitation W912CH-25-R-0201 for Ammunition Container

PDFifb

W912CH-25-R-0201+QA.xlsx

XLSX

Attachment+0001+-+FAT+Waiver+Worksheet.pdf

PDF

Attachment+0002+-+Attachment+A+CUI+2024.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

1 update
PhaseSolicitation
Posted

Sources Sought

Type Changed

Sources Sought → Presolicitation

Type Changed

Presolicitation → Solicitation

Amendment 1

Contract was updated

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → W6QK Acc- Dta
Contacts2 people available
OfficeWARREN, MI, 48397-5000, USA
Organization / Agency
Department Of Defense → W6QK Acc- Dta
View Agency Profile
Office AddressWARREN, MI, 48397-5000, USA
Contacts

Full Description

Show more

**As of 22 July 2026. QA log uploaded to attchment section to address questions from contractors.**


The United States Army Contracting Command – Detroit Arsenal (ACC-DTA) is soliciting a single, Firm-Fixed Price (FFP), five year Requirements Contract for the following item:



Nomenclature: Ammunition Container
NSN: 1095-01-583-7967
Part No.: 13023133
This solicitation is a 100% Small Business Set-Aside.
Joint Certification Program (EXPORT CONTROL):
The TDP is EXPORT CONTROLLED, Distribution D



Export Controlled. JCP Certification is required. You must request access to the TDP via SAM.gov and have JCP Certification.
You must be certified under the United States/Canada Joint Certification Program (JCP) (https://www.dla.mil/HQ/LogisticsOperations/Services/JCP/) to be granted access to the technical data (TDP) for this solicitation.
The Government requires Military Packaging - Level B and has associated Special Packaging Instructions (SPIs). Please refer to Section D of the solicitation for additional information.



CAUTION: This solicitation will be issued electronically as will any amendments thereto. Because of this, the Government is under no obligation and is, in fact, unable to maintain a mailing list. The burden is therefore on any interested parties to periodically access the above internet address in order to obtain any amendments which may be issued. Failure to obtain any amendments and to respond to them prior to the date and time set for receipt of proposals may render your proposal nonresponsive and result in the rejection of the proposal. All questions pertaining to this solicitation shall be directed via email to Contract Specialist, Ryan Nawrocki, ryan.d.nawrocki.civ@army.mil.

Similar Contracts

Same NAICS industry code

NAICS: 332439
New
DIBBS
CUSHIONING MATERIAL, PAThe contract solicits eight units of cushioning material for packaging under NSN 8145-01-353-3277 with a delivery deadline of 167 days after award, as part of solicitation SPE8ED-26-T-1163 issued by the Department of Defense through the Construction & Equipment Containers agency. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible via the DLA eProcurement portal, with applicable revisions determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions unless an amendment supersedes it. The material must comply with strict prohibitions against intentional addition or direct contact with mercury or mercury-containing compounds, except for specific functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemical reagents specified by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shock-proof and feature a secondary containment boundary, as mandated by NAVSEA 5100-003D. All supplies must be free of government identification if not accepted, and performance is designated for Tracy, California, 95304-5000. The solicitation opens on July 22, 2026, with response submissions due by August 3, 2026, and the primary point of contact is Ogden Howard at ogden.howard@dla.mil.
CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332439
New
Federal
81--SHIPPING AND STORAGThis contract pertains to the procurement of shipping and storage containers specified under drawing number 05259-898E001, revision latest, with strict adherence to military and industry standards for materials, welding, and quality assurance. The containers must be manufactured from aluminum, feature an electrodeposited alkaline Zinc-Nickel Alloy finish, and include a Unique Identification (UID) marking in data matrix format per MIL-STD-130, with serial numbers formatted as contract#_no_dashes-000X. All welding must comply with AWS D1.2 for aluminum using specified filler materials, and welders must be qualified accordingly. Critical processes such as cleaning, deoxidizing, and sealing must be performed within strict timeframes and using approved methods, with detailed work instructions required at each workstation. The contractor is solely responsible for providing all tooling, fixtures, and test equipment, and must ensure materials meet certification requirements without government provision. The contract mandates a First Article Test (FAT) for new manufacturers, requiring submission of one sample unit within 120 calendar days to a designated government test facility, with all associated costs borne by the contractor. Testing includes dimensional and form/fit verification, a functional 100% production leak test using a 1.0 PSIG pressure hold for 30 minutes, and an 18-inch free-fall drop test to evaluate structural integrity. The sample must remain unpainted, with corrosion-prone areas treated with light preservative, and shipping must include appropriate labeling and documentation. The government may waive FAT requirements for qualified previous suppliers who can prove identical production under the same facilities within the last three years, provided they submit dual pricing. The solicitation, issued by DLA Aviation Philadelphia, closes on July 20, 2026, and includes stringent compliance with Buy American provisions, security prohibitions, equal opportunity mandates, and transportation regulations. Non-compliance with any clause, including failure to deliver a FAT sample or repeated disapprovals, may constitute default under the contract terms.
Pa DLA Aviation At Philadelphia

POSTED

about 9 hours ago

DEADLINE

in about 21 hours
View Details

More opportunities from Department Of Defense → W6QK Acc- Dta

Same awarding agency

NAICS: 541715
New
Federal
ACC-DTA Ground Maneuver Commercial Solutions Opening (CSO)The ACC-DTA Ground Maneuver Commercial Solutions Opening (CSO) under solicitation number W912CH-26-S-0001 is a streamlined acquisition vehicle authorized under DFARS Subpart 212-70, designed to rapidly award fixed-price contracts or other non-traditional agreements to acquire innovative commercial technologies that enhance ground vehicle systems and support Army modernization priorities. The initiative targets commercially available products and processes, including those driven by private investment, and permits awards under FAR Part 12 for commercial items, 10 U.S.C. 4022 transaction agreements, or 31 U.S.C. 6305 cooperative agreements. The CSO is open through January 9, 2029, with the Government retaining the right to extend the period and add new Areas of Interest (AoIs) at any time, each potentially with its own submission deadline. Proposals must be submitted via email to designated points of contact and organized into two volumes: a technical proposal detailing the approach, work plan, staffing, and deliverables, and a price proposal including rough order of magnitude pricing, schedule, labor categories, and material costs. All submissions must be unclassified and may include controlled unclassified information requiring compliance with 32 CFR Part 2002. Awardees must be registered in SAM and the Wide Area Work Flow invoicing system, must not be suspended or debarred, and must comply with procurement integrity and export control requirements. For specific AoIs like the TIGER Hackathon, vendors must affirm compliance with the Trade Agreements Act and Buy American Act and eliminate reliance on adversarial foreign nations for critical minerals. Evaluation priorities include responsiveness to the AoI, technical merit, innovation, affordability, intellectual property restrictions, and supplemental details from the initial submission. Awards will be made based on favorable review and fund availability, with no pre-determined contract ceiling or estimated value specified.
Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

about 9 hours ago

DEADLINE

in over 2 years
View Details
NAICS: 336992
New
Federal
BOAST RFOP - Track Shoe Set, Vehicular - NSN: 2530-00-150-5895The Army Contracting Command - Detroit Arsenal is seeking proposals under the Basic Ordering Agreement Sustainment Track (BOAST) program for 89,216 Track Shoe Sets, Vehicular (NSN 2530-00-150-5895, Part Number 5704208), with two optional 12-month periods each for an additional 65,569 units. This is a Full and Open solicitation restricted to vendors who have a fully executed BOAST Basic Ordering Agreement in place prior to the proposal deadline of July 29, 2026. Awards will be made on a Firm-Fixed-Price basis through a Lowest Price Technically Acceptable (LPTA) evaluation, with price being the sole evaluation factor, meaning the offeror submitting the lowest responsive and responsible price will be selected. The items must conform to strict configuration control standards per SAE EIA-649-1, and contractors may submit Engineering Change Proposals, Requests for Variance, and Notices of Revision through designated CDRLs (A001, A002, A003), all governed by government-approved formats and submission routing. The contract requires compliance with extensive regulatory and operational mandates. Technical data is export-controlled, and access requires current Joint Certification Program (JCP) certification, with non-compliant vendors required to submit DD Form 2345 to the U.S./Canada Joint Certification Office. Inspection and acceptance occur at origin, and the contractor must adhere to MIL-STD-1916 for acceptance sampling with verification levels designated for major and minor characteristics. Packaging and marking must comply with MIL-STD-2073-1 (Military preservation, Level B packing), MIL-STD-129 for labeling, SPI AK01505895 Rev K, and ISPM 15 standards for wood packaging materials certified with DH treatment. The items are to be shipped FOB Destination to Texarkana, TX, with deliveries due within 270 calendar days after order receipt for both base and option quantities. Additional compliance obligations include NIST SP 800-171 cybersecurity requirements, Buy American provisions, trafficking in persons prohibitions, OPSEC plan adherence, mandatory OPSEC training, and accelerated payment requirements for small business subcontractors. Proposals must be submitted electronically via email, include the vendor’s SAM registration and CAGE code, and remain valid
Military Armored Vehicle, Tank, and Tank Component Manufacturing

POSTED

about 9 hours ago

DEADLINE

in 7 days
View Details
NAICS: 488999
New
Federal
Request for Information: DRIVE-BY-WIRE APPLIQUE KITS FOR EXISTING ARMY PLATFORMSThe U.S. Army is seeking industry input through a Request for Information (RFI) to assess the availability and capabilities of drive-by-wire (DBW) applique kits that can be integrated onto existing ground, air, and maritime platforms currently in its inventory. This initiative, identified as PANDTA-26-P-0000037336 and issued by the W6QK Acc-Dta office in Warren, Michigan, aims to inform future acquisition planning by gathering technical data on industry readiness to engineer, prototype, test, and scale DBW systems for wheeled tactical vehicles, tracked combat vehicles, and watercraft. The RFI specifically seeks information on system interfaces using protocols such as CAN and UDP, hardware-software decoupling, support for continuous integration and deployment (CI/CD), enhanced safety and redundancy features including fault detection and cyber resilience, compatibility with autonomous driving software and high-performance computing systems, and the use of simulation-driven development workflows. The government is not requesting proposals or pricing and has not established any evaluation criteria, as this is strictly a market survey with no obligation to procure. Responses must be submitted by July 24, 2026, at 3:00 p.m. EST to the designated points of contact, using MS Word or PDF format with a five-page limit excluding title pages and certification attachments, and must follow strict formatting requirements including Times New Roman font size 12 and one-inch margins. All submissions must comply with stringent cybersecurity protocols, requiring that Controlled Unclassified Information (CUI) be transmitted using NIST- or NIAP-approved cryptographic methods such as DoD SAFE, and no classified data may be included. Respondents are required to clearly mark any proprietary information with the term “PROPRIETARY” on the email cover, at the start of the file, and surrounding specific sections with “PROPRIETARY PORTION BEGINS” and “PROPRIETARY PORTION ENDS” legends, along with an accompanying release statement permitting distribution to Army personnel and government support contractors involved in the review. Companies must provide their name, mailing address, CAGE code, and website, and each organization may submit only one response. The NAICS code for this effort is 488999, and while the government acknowledges its legal obligation under 18 U.S.C. §1905 to protect confidential information, participation is entirely voluntary and does not constitute a solicitation, a promise to award a contract,
All Other Support Activities for Transportation

POSTED

1 day ago

DEADLINE

in 2 days
View Details
NAICS: 336390
New
Federal
Re-Solicitation for SUPPORT KIT, AUXILIA NSN: 2541-01-676-0627The solicitation W912CH-24-R-0205 is for the procurement of the Support Kit, Auxilia, identified by NSN 2541-01-676-0627 and manufacturer part number 57K7284, under a Firm Fixed Price contract with a one-year option quantity, set aside for small business concerns. The contract requires strict compliance with military standards for packaging, preservation, and marking in accordance with MIL-STD-2073-1 and MIL-STD-129, including the application of Unique Item Identifiers and adherence to Level A packaging and Military preservation standards. The item will be delivered FOB destination to Anniston, AL, with a baseline delivery schedule starting 300 days after award or upon First Article Test approval, whichever is later, and a separate CLIN for First Article Test reporting due 330 days after award, with no alternative schedules permitted for this line item. Proposals must be submitted electronically via email to christina.a.herbig.civ@army.mil and amy.m.dombrowski.civ@army.mil by 3:00 PM EST on July 31, 2026, with a submission deadline extended from prior dates through successive amendments and valid for 120 days beyond submission. All proposals must conform to the Uniform Contract Format, be in English and US dollars, include current SAM certifications, and be submitted as a single, virus-free submission not exceeding 10 megabytes with proper subject line labeling. The solicitation incorporates extensive updates from the Revolutionary FAR Overhaul, including revised contract clauses such as FAR 52.209-1, FAR 52.210-1, FAR 52.211-5, FAR 52.215-2, FAR 52.215-23, FAR 52.219-6, FAR 52.219-8, FAR 52.219-14, FAR 52.219-28, FAR 52.219-33, FAR 52.222-19, FAR 52.222-20, FAR 52.222-35, FAR 52.222-36, FAR
Other Motor Vehicle Parts Manufacturing

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 541350
New
Federal
Quality Inspection and Non-Destructive Testing (NDT) ServicesThe contract calls for the provision of non-destructive testing and quality inspection services specifically for Tubing Assemblies to ensure full compliance with government standards prior to acceptance. Tasks include performing a range of non-destructive techniques such as X-ray, dye penetrant, and ultrasonic testing to detect any defects or deviations that could compromise structural integrity or performance. The work is critical to validating conformance and must be executed with precision to meet the stringent requirements associated with Department of Defense procurement. All testing and inspection activities are subject to government oversight and must align with applicable technical specifications and quality control protocols. This is a total small business set-aside under the SBA program, meaning only eligible small businesses may compete for this opportunity. The North American Industry Classification System code 541350 identifies the nature of the work as professional, scientific, and technical services related to mechanical testing. The solicitation was posted on July 20, 2026, with a response deadline of August 10, 2026. The contracting authority is the Department of Defense under the office designation W6QK Acc- Dta, and performance locations are not specified, though the work is tied to government acceptance criteria. The contract is structured as a subcontract, indicating it may flow from a prime contractor or be part of a larger procurement framework supporting defense system components.
Building Inspection Services

POSTED

2 days ago

DEADLINE

in 19 days
View Details
NAICS: 423510
New
Federal
Supply of Raw Materials or Specialty TubingThe contract calls for the supply of raw metal tubing or specialty alloys that must meet MIL-SPEC or ASTM standards, specifically for use in the fabrication of defense-grade tubing assemblies. Materials must be qualified to exacting military and industry specifications to ensure performance, durability, and reliability in high-stakes applications. The solicitation is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the SBA are eligible to respond, reinforcing the Department of Defense’s commitment to fostering small business participation in defense supply chains. The North American Industry Classification System code 423510 classifies this as wholesale trade of metal and metal ore, indicating the transaction involves distribution of industrial raw materials rather than manufacturing. The opportunity was posted on July 20, 2026, with a deadline for responses set for August 10, 2026, at 8:00 PM Eastern Time. All submissions must comply with the prescribed technical and compliance requirements tied to the material standards and small business eligibility criteria. This procurement is managed by the Department of Defense under the agency designation W6QK Acc- Dta, with no specific place of performance or point of contact listed, suggesting that delivery logistics and vendor coordination will be addressed post-award. Interested parties must access the full solicitation through the provided SAM.gov link to review detailed technical specifications, quality assurance protocols, and submission procedures.
Metal Service Centers and Other Metal Merchant Wholesalers

POSTED

2 days ago

DEADLINE

in 19 days
View Details
NAICS: 332312
New
Federal
Precision Machining and Fabrication of Tubing AssemblyThe contract calls for the manufacture of six non-conforming tubing assemblies to meet military specifications, requiring precision bending, welding, and assembly of metal tubing components to ensure compliance with rigorous defense standards. Despite being labeled as non-conforming, the assemblies must still adhere to strict technical and quality requirements dictated by military protocols, indicating potential design deviations that remain acceptable under specific authorization or testing protocols. The work involves high-precision fabrication processes typical of specialized aerospace or defense applications, demanding skilled labor and certified equipment to deliver functional, reliable components. This is a total small business set-aside subcontract under NAICS code 332312, restricted exclusively to small business entities as defined by the Small Business Administration, ensuring opportunity for qualified small manufacturers. The solicitation was posted on July 20, 2026, with a response deadline of August 10, 2026, giving potential bidders a three-week window to prepare and submit proposals. The contracting activity is under the Department of Defense, specifically attributed to W6QK Acc- Dta, with no designated place of performance or point of contact provided in the data, suggesting the work may be performed at the contractor’s facility or an undisclosed location. All bids must be submitted through the SAM.gov portal prior to the deadline to be considered.
Fabricated Structural Metal Manufacturing

POSTED

2 days ago

DEADLINE

in 19 days
View Details
NAICS: 332216
New
Federal
Solicitation - Standard Automotive Tool Set (SATS) Base in Mobile; NSN: 4910-01-531-2053 - UPDATEDThis solicitation, issued as a sealed bid under W912CH-26-B-0003, seeks a single Firm-Fixed Price contract for the Standard Automotive Tool Set (SATS) Base in Mobile, identified by NSN 4910-01-531-2053 and part number KTCS1753. The procurement is exclusively set aside for small business concerns under Revolutionary FAR Overhaul 19.104-1 and is for the delivery of a standardized tool system comprising five roll-around storage units labeled G, H, J, K, and L, along with additional commercially packaged hand tools, all meeting rugged military specifications. The Technical Data Package (TDP) with Distribution Statement A is available on SAM.gov and is essential for compliance, as the product must meet or exceed the quality and workmanship of domestic commercial equivalents. All bids must be submitted electronically in Microsoft Office or PDF format under strict formatting rules, including file size limits, naming conventions, and prohibition of hyperlinks or external references. The Government will evaluate bids without discussions, and failure to complete all required representations, fill-ins, or meet material requirements will result in immediate rejection. Bids must include pricing for both the production quantity and an unexercised option quantity of 95 units, evaluated on the lowest total price, with transportation costs assessed at FOB origin. The contract requires full compliance with military packaging standards, including MIL-STD-2073 and MIL-STD-129 for marking and labeling, with mandatory application of U.S. Military Property identification per MIL-STD-130 and adherence to Unique Item Identifier (UII) requirements. Inspection and acceptance must occur at origin, and the contractor is solely responsible for arranging pre-shipment government inspection through the Defense Contract Management Agency prior to shipping to the designated delivery location in New Cumberland, PA. Payment will be processed via Wide Area WorkFlow (WAWF) under specific DoDAAC routing instructions, and all submissions must be in English and U.S. dollars. The contract incorporates numerous FAR and DFARS clauses by reference, including those governing subcontractor payments, anti-kickback procedures, trafficking in persons, employment eligibility verification, and compliance with Buy American and Berry Amendment laws. Bidders must ensure their SAM registration is current and contains all applicable certifications within the last 12 months. Key amendments and updates, including Amendment 0001 and 0002, and the Domestic
Saw Blade and Handtool Manufacturing

POSTED

2 days ago

DEADLINE

in 2 days
View Details