Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

Sources Sought-Diaphragm vacuum pumps and associated Spare Parts kits

Active
A064371SN01Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The U.S. Air Force Life Cycle Management Center’s Cryptologic and Cyber Systems Division is preparing to issue a solicitation for Diaphragm Vacuum Pumps and associated Spare Parts kits under NAICS code 333914 and PSC 6635, following the closure of the Sources Sought phase identified by F3KTK76097AW01. The anticipated release date for the official solicitation is 17 June 2026, though this date is non-binding and subject to change without notice. The procurement is intended to ensure fair and open competition, with no obligation from the Government to award a contract or reimburse any costs incurred by potential offerors during the proposal process. Interested parties must monitor the official procurement channels for the formal announcement and related documentation. The place of performance for this requirement is San Antonio, Texas, and all communications must be directed in writing to the designated points of contact: Teresa Rodgers, Contract Specialist, at teresa.rodgers.2@us.af.mil, and Sydnia Johnson, Contracting Officer, at sydnia.johnson@us.af.mil. The solicitation will be issued under the number A064371SN01 and is hosted on the SAM.gov platform. The contracting office is located at FA8307 AFLCMC HNCK HNC Cyber & NTR in San Antonio, TX, with a ZIP code of 78243-7007, and the performance location is listed as San Antonio, Texas, with a ZIP of 78226. While the notice provides key details for planning, it does not constitute a commitment to procure and all participants are responsible for staying current with updates to the solicitation posting.

General Info

DoD AFLCMC plans June 2026 solicitation for diaphragm vacuum pumps and spare parts.

Agency

Department Of Defense → FA8307 Aflcmc Hnck Hnc Cyber & NtrView Agency

NAICS

333914 - Measuring, Dispensing, and Other Pumping Equipment ManufacturingView NAICS

Place of Performance

San Antonio, TX, 78226, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

special-notice

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FA8307 Aflcmc Hnck Hnc Cyber & Ntr
Contacts2 people available
OfficeSAN ANTONIO, TX, 78243-7007, USA
Organization / Agency
Department Of Defense → FA8307 Aflcmc Hnck Hnc Cyber & Ntr
View Agency Profile
Office AddressSAN ANTONIO, TX, 78243-7007, USA
Contacts
Teresa Rodgers
contact@example.gov
sydnia johnson
contact@example.gov

Full Description

Show more

PRE-SOLICITATION UPDATE: Upcoming Solicitation Release


Administrative Detail :  Information


Original Sources Sought ID:  F3KTK76097AW01


NAICS: 333914


PSC: 6635


Status:  Sources Sought Closed


Anticipated Solicitation Release:  17 June 2026


PURPOSE
The Sources Sought phase under Notice ID F3KTK76097AW01 is officially closed. The AFLCMC Cryptologic and Cyber Systems Division intends to issue a solicitation for Diaphragm Vacuum Pumps and Spare Parts. In the interest of transparency and fair competition, the Government is publishing this notice to inform all potential offers that the current anticipated release date for the upcoming solicitation is 17 June 2026 by close of business. 


Please note that this special notice provides an estimate for planning purposes only, the date is subject to change, and in no way is the Government obligated to award it or reimburse any proposal costs.  It is the responsibility of interested parties to monitor this site for the official release of the solicitation and any related documents.


All questions or inquiries regarding this procurement must be submitted in writing to the Points of Contact identified below.


Primary Point of Contact:


Teresa Rodgers / Contract Specialist


Email: teresa.rodgers.2@us.af.mil



Secondary Point of Contact:


Sydnia Johnson / Contracting Officer


Email: sydnia.johnson@us.af.mil

Similar Contracts

Same NAICS industry code

NAICS: 333914
New
DIBBS
FILTER ELEMENT, FLUI
Solicitation # SPE7M1-26-T-219K
The contract is for the procurement of 980 units of a fluid filter element identified by NSN 4330011668391 and part number 7583216 from PTI TECHNOLOGIES INC., issued under solicitation SPE7M1-26-T-219K as a total small business set-aside under FAR Part 13 simplified acquisition procedures. Delivery is required FOB origin within 251 days from the award date, with the original delivery deadline set for January 10, 2027, and a need ship date of October 21, 2025. The item must be delivered to the DLA Distribution facility at New Cumberland, Pennsylvania, with packaging strictly conforming to MIL-STD-2073-1E including preservation method 31, cleaning/drying code 1, and unit container type E6, while marking and barcoding shall comply with MIL-STD-129 and no special marking is required. Palletization must meet DLA’s RP001 requirements, and hazardous material labeling must adhere to 29 CFR 1910.1200 and DFARS 252.223-7001. Mercury or mercury-containing compounds are prohibited except in functional applications such as batteries, fluorescent lamps, sensors, controls, weapon systems, or NAVSEA-specified reagents, with portable mercury-containing devices requiring shock-proof construction and secondary containment per NAVSEA 5100-003D. Inspection and acceptance occur at the destination by government representatives under FAR 52.246-2, and invoicing must be submitted via Wide Area WorkFlow. The contract includes mandatory clauses on equal opportunity, trafficking prevention, employment eligibility, sustainable products, safeguarding of contractor information systems, changes, subcontracting, default, and accelerated payments to small business subcontractors. The solicitation was issued on July 31, 2026, with a response deadline of August 5, 2026, and technical and quality requirements referenced via R and I numbers from the DLA Master List of Technical and Quality Requirements. No contract value is specified due to incomplete pricing data in Section B, and the contracting officer is Thomas Reckart with contact information provided, though no COR, COTR, or PCO is named. The NAICS code is 33391
MARITIME SUPPLY CHAIN

POSTED

about 14 hours ago

DEADLINE

in 4 days
View Details
NAICS: 333914
New
DIBBS
Supply of Shaft Seal Assemblies (Mechanical Components)
MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 333914
New
DIBBS
Hydraulic Motor SupplyThe contract solicits the supply of three hydraulic motors that must meet all applicable federal and military standards, including proper labeling and packaging to ensure compliance with procurement regulations. The delivery endpoint is DLA Distribution New Cumberland, Pennsylvania, with a zip code of 17070-5002, and the performance location is firmly established at this facility. The work falls under NAICS code 333914, indicating it is related to other engine equipment manufacturing, and the contract type is classified as a subcontract under the Department of Defense’s Maritime Supply Chain organization. The solicitation was posted on July 30, 2026, with responses due by August 10, 2026, and all submissions must align with the technical and procedural requirements specified by the Department of Defense to qualify for award.
MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 333914
New
DIBBS
Manufacture of Spring-Loaded Shaft Seal AssembliesThe contract requires the full manufacturing, quality assurance, packaging, and delivery of four spring-loaded shaft seal assemblies identified by NSN 4320-01-254-5483, all in strict compliance with military specifications. The work encompasses every phase of production from initial fabrication through final inspection and packaging to ensure the assemblies meet the required performance and durability standards for military use. The place of performance is designated as Tracy, California, with a zip code of 95304-5000, indicating where the finished products must be delivered or inspected. The NAICS code 333914 classifies this as a contract under miscellaneous commercial and industrial machinery manufacturing, reflecting the specialized nature of the components involved. This is a subcontract opportunity posted by the Maritime Supply Chain under the Department of Defense, with a response deadline of August 10, 2026, and a posting date of July 30, 2026. The solicitation is accessible through the DIBBS platform, and while no set-aside classification is specified, the requirement is clearly defined with a fixed quantity of four units. Interested parties must ensure full adherence to military standards in both design and production, and submission of proposals must occur before the deadline to be considered. There is no designated point of contact listed, suggesting responses should follow standard submission protocols through the provided online portal.
MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 333914
New
DIBBS
Centrifugal Pump SupplyThe contract involves the supply of seven centrifugal pumps that must comply with the military specification NSN 4320016163309, destined for delivery to New Cumberland, Pennsylvania, with a zip code of 17070-5002. The requirement is categorized as a subcontract under NAICS code 333914, which corresponds to the manufacturing of pumps and pumping equipment. The solicitation was posted on July 30, 2026, with a deadline for responses set for August 10, 2026, indicating a short window for interested parties to submit proposals. The contracting activity is managed by the Maritime Supply Chain under the Department of Defense, with no set-aside designation specified, meaning the opportunity is open to all eligible contractors. The point of contact information is not provided, and all communications and submissions must be processed through the official DIBBS portal listed in the UI link.
MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 333914
New
DIBBS
Rotary Pump Supply (OEM or Authorized Distributor)The contract requires the supply of two rotary pumps compliant with NSN 4320-01-707-7214, sourced exclusively from original equipment manufacturers IVECO DEFENCE VEHICLES S.P.A. or BOSCH REXROTH CORPORATION, ensuring full OEM traceability and adherence to technical performance standards. All units must be delivered FOB origin, with documentation verifying manufacturer authenticity and compliance with military specifications. The solicitation is classified as a subcontract under NAICS code 333914, issued by the Department of Defense through the MARITIME SUPPLY CHAIN organization, with performance required at NEW CUMBERLAND, PA, ZIP 17070-5002. Respondents must submit proposals by August 10, 2026, with the opportunity posted on July 30, 2026, and all bidding must align with the specified technical and logistical requirements outlined in the DIBBS system.
MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 333914
New
DIBBS
FILTER, FLUID
Solicitation # SPE7M2-26-T-5840
This contract is for the procurement of a fluid filter with NSN 4330-01-561-3353 and part number 4240T-8TT supplied by NORMAN FILTER COMPANY, L.L.C., under solicitation SPE7M2-26-T-5840. The requirement is for 94 units delivered FOB origin with no tolerance for quantity variance, and delivery is due within 168 days from the contract award. Inspection and acceptance occur at the destination warehouse located in Tracy, California. Packaging must comply with MIL-STD-2073-1E and DLA Packaging Requirements, including specific methods for preservation, wrapping, and containerization, while marking adheres strictly to MIL-STD-129 without any special codes. The product is designated as a critical application item. Mercury and mercury-containing compounds are prohibited unless explicitly exempted for functional uses in batteries, fluorescent lamps, instruments, sensors, weapon systems, or specified chemical reagents, with portable mercury-containing devices requiring shockproof construction and secondary containment as per NAVSEA 5100-003D. Technical and quality standards referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the controlling revision determined by the solicitation or award date depending on acquisition size. The contract is issued under a Women-Owned Small Business Set-Aside with a NAICS code of 333914, and the unit of issue is each (EA) at a unit price of $94, totaling $8,836. The required ship date is January 26, 2027, with an original delivery deadline of February 14, 2027. Transportation and shipping instructions reference DLA procedural notes C19 and C20, and all correspondence is directed to the specified recipient warehouse.
NUCLEAR REACTOR PROGRAM

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 333914
New
DIBBS
HEAD, HYDRAULIC MOTO
Solicitation # SPE7M4-26-T-293G
The contract is for the procurement of 10 units of a hydraulic motor-pump assembly identified by NSN 4320-00-980-2915 and manufacturer part number DS-921943 from Eaton Aerospace, LLC, under solicitation SPE7M4-26-T-293G. Delivery is required within 356 days from the contract award, with FOB origin terms, inspection and acceptance occurring at the destination, and no variance allowed in quantity. The item is classified as a critical application component subject to stringent technical and quality standards derived from the DLA Master List of Technical and Quality Requirements, which override any conflicting commercial specifications. Compliance with MIL-STD-1916 or equivalent zero-based sampling plans is mandated, with critical attributes requiring a verification level of VII or an AQL of 0.1, and non-conformances must be zero unless otherwise specified. Packaging must meet ASTM D3951 standards, with labeling per MIL-STD-129 and palletization according to DLA packaging requirements, while all materials must be marked and handled in accordance with RP001 and RQ001 provisions. Cybersecurity compliance requires a CMMC Level 2 self-assessment, and government identification must be removed from non-accepted supplies. The delivery destination is DLA Distribution Depot Hill at Hill AFB, Utah, with the required ship date set for August 2, 2027, and the contract is managed by the Department of Defense’s Fluid Handling Division, with Rory O’Reilly as the primary point of contact.
FLUID HANDLING DIVISION

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 333914
New
DIBBS
SLEEVE, SHAFT, PUMP
Solicitation # SPE7M1-26-T-241W
The contract pertains to the supply of one sleeve, shaft, pump identified by NSN 4320-01-497-0752 and part number 14615N18 or PL14590N18-294 from Curtiss-Wright Electro-Mechanical, designated as a critical application item. Delivery is required FOB origin within 202 days from the solicitation date, with no variance allowed in quantity and inspection and acceptance occurring at the destination. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, using code U for packaging and specific methods for preservation, wrapping, and unit containment. The item is subject to strict environmental restrictions: ozone-depleting chemicals are entirely prohibited, and mercury or mercury-containing compounds are banned unless explicitly exempted for functional uses such as batteries, lighting, or naval instruments under prescribed conditions, with portable mercury-containing devices requiring shockproof design and secondary containment. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date. The supply must be delivered to the specified DLA distribution center in Tracy, California, with transportation instructions governed by DLAD procedural notes C19 and C20. The solicitation, issued under SPE7M1-26-T-241W, closed for responses on August 10, 2026, with the contract managed by the Department of Defense through the Maritime Supply Chain office.
MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 333914
New
DIBBS
MOTOR, HYDRAULIC
Solicitation # SPE7M1-26-T-241Z
The contract pertains to the procurement of three hydraulic motors with NSN 4320015151081 and part numbers 1HA141 and 4000721-502, sourced from OSHKOSH DEFENSE LLC and MANITEX INC, under solicitation SPE7M1-26-T-241Z. The unit of issue is each, with a total quantity of three units at a unit price of $3.00, resulting in a total contract value of $9.00. Delivery is required within 68 days from the contract award, FOB origin, with no tolerance for quantity variance. Inspection and acceptance are to occur at the destination, and all items must be packaged in accordance with ASTM D3951, subject to the overriding authority of the DLA Master List of Technical and Quality Requirements. Packaging must also comply with MIL-STD-129 for marking and labeling, and palletization must adhere to DLA packaging standards. The delivery destination is the DLA Distribution DDSP New Cumberland Facility at 2083 Normandy Drive, Door 113 to 134, New Cumberland, PA 17070-5002, with the same address used for freight shipping and parcel post. The required ship date and original delivery date are both October 18, 2026, and transportation logistics must follow DLAD Proc Notes C19 and C20. The contract references the DLA eProcurement portal for applicable technical and quality requirements identified by R or I numbers, and the revision in effect on the solicitation issue date controls compliance. The solicitation was posted on July 30, 2026, with responses due by August 10, 2026. The NAICS code is 333914, and the contracting agency is the Department of Defense under the Maritime Supply Chain organization, with Michael Reese listed as the primary point of contact.
MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 333914
New
DIBBS
SEAL ASSEMBLY, SHAFT
Solicitation # SPE7M1-26-T-243M
The contract pertains to the procurement of seven seal assemblies for shafts, identified by NSN 4320-01-692-7342 and part number 12-0204-01 from Air & Liquid Systems Corporation, with a unit price of $7.00 per unit and a total contract value of $49.00. Delivery is required within 170 days from the contract award, with shipment FOB origin and inspection and acceptance occurring at the destination warehouse in Tracy, California. The quantity is fixed with no variance allowed, and all items must be packaged in compliance with ASTM D3951, though DLA’s Master List of Technical and Quality Requirements take precedence and must be fully adhered to. Packaging and labeling must conform to MIL-STD-129, and palletization must comply with DLA’s packaging requirements. The item is to be delivered to the specified DLA distribution center, with transportation governed by DLAD procedural notes C19 and C20. The solicitation number is SPE7M1-26-T-243M, issued under a federal acquisition authority by the Department of Defense’s Maritime Supply Chain, with a response deadline of August 10, 2026, and a posted date of July 30, 2026. The point of contact is Michael Reese, reachable via phone and email provided in the documentation.
MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 333914
New
DIBBS
RING, WEARING
Solicitation # SPE7M1-26-T-240Y
This contract specifies the procurement of five wearable rings identified by NSN 4320-01-282-4159 under solicitation SPE7M1-26-T-240Y, with a required delivery date of February 12, 2027, and a delivery window of 185 days from award. The items must be delivered FOB origin in strict compliance with MIL-STD-2073-1E packaging standards and MIL-STD-129 marking requirements, with no special marking permitted. Packaging must adhere to DLA guidelines, including fabric bags conforming to MIL-B-117 Type 1, 2, or 3 Class B or C Style 1. The shipment is directed to the DLA Distribution San Joaquin warehouse in Tracy, California, and transportation logistics follow DLAD Proc Notes C19 and C20. The contract prohibits the use of Class I ozone-depleting chemicals and strictly forbids intentional addition of mercury or mercury-containing compounds to the product, except in approved functional applications such as batteries, fluorescent lights, sensors, or instrument controls as specified by NAVSEA, which must also include secondary containment and shock-proofing per NAVSEA 5100-003D. The product is classified as a critical application item, with the specified part number associated with Carver Pump Company. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with revisions controlled by the solicitation issue or award date depending on acquisition type. The unit of issue is each, with zero percent variance allowed in quantity, and inspection and acceptance occur at destination. The contract was posted on July 30, 2026, with responses due by August 10, 2026, and is managed by the Department of Defense under NAICS code 333914, with Michael Reese as the primary point of contact.
MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 9 days
View Details

More opportunities from Department Of Defense → FA8307 Aflcmc Hnck Hnc Cyber & Ntr

Same awarding agency

NAICS: 541511
New
Federal
Party Bus Operations and Collaboration Tools (Consolidation)
Solicitation # FA830726RB064
The U.S. Air Force Life Cycle Management Center’s Platform One contracting office is consolidating three existing Basic Ordering Agreements to solicit a non-personnel services contract for Party Bus Operations and Collaboration Tools, aimed at delivering a unified enterprise DevSecOps and collaboration platform to support Department of War mission partners. The contractor will be responsible for providing full lifecycle support including Kubernetes administration, Git-based software development, CI/CD pipeline management, cloud-native engineering, Site Reliability Engineering, infrastructure automation, cybersecurity operations, and enterprise collaboration tool administration, all while ensuring compliance with the Department of War Risk Management Framework and Platform One security standards across Impact Levels 2, 4, and 5. The scope includes Infrastructure as Code, GitOps, identity and access management, continuous monitoring, backup and recovery, compliance automation, and Continuous Authorization to Function support, all delivered through secure-by-design, highly automated processes that enhance platform reliability, scalability, and resilience. The acquisition will be conducted under the Commercial Solutions Opening authority on the Platform One Solutions Marketplace, targeting the most technically capable vendor currently registered on the platform. The resulting contract is structured with a one-year base period and four one-year option periods, allowing for extended performance and scalability as mission needs evolve. All proposers must submit a video solution via the Platform One portal by the deadline of August 20, 2026, to be considered. The procurement does not include a small business set-aside and is governed by NAICS code 541511. The primary point of contact for questions is Contracting Officer Jamail Walker, with additional support available from Daniel Hines and Small Business Professional Zakiya U. Norris. Performance will be based out of San Antonio, Texas, and all activities must align with existing Platform One architecture and continuous compliance processes to sustain and enhance enterprise DevSecOps capabilities for DoD mission partners.
Custom Computer Programming Services

POSTED

about 19 hours ago

DEADLINE

in 19 days
View Details
NAICS: 335311
New
Federal
Modular Three-Phase Uninterruptible Power Supply (UPS) System
Solicitation # FA830726QB087
The U.S. Air Force, through the Air Force Life Cycle Management Center’s Cryptologic and Cyber Systems Division, is soliciting quotes for a Modular Three-Phase Uninterruptible Power Supply (UPS) system with a capacity of 40 kVA to 60 kW under a Firm Fixed Price purchase order using Simplified Acquisition Procedures. The system must include an integrated or external battery solution using VRLA or Lithium-Ion technology and a right-attached Maintenance Bypass Cabinet with an integrated 250A panelboard, featuring front-only service access and top cable entry. Technical requirements mandate minimum 97.5% efficiency in double-conversion mode, UL 1778 listing, a 65kAIC interruption rating, local touchscreen HMI, and network card support for SNMP, Modbus, and BACnet protocols. The system must be configured for front-to-top airflow, with no ground-level cabling to preserve pedestrian pathways, and optional seismic brackets must be available for Lackland AFB compliance. Installation is to occur at the ITAC INE test center at Joint Base San Antonio-Lackland, with strict prohibitions against disturbing Class II Asbestos Containing Material. Quotations must be submitted by 16:00 CST on 27 July 2026 to the designated points of contact, and all proposals must adhere to the Revolutionary Federal Acquisition Regulations Overhaul and the Revolutionary Defense Federal Acquisition Regulation Supplement, with full compliance to the referenced FAR and DFARS clauses. Offerors must be registered in the System for Award Management, provide their UEI and CAGE codes, confirm business size and ownership status, and ensure pricing is valid for 30 days. Delivery and installation are required within 30 to 60 days after receipt of order, with payment processed electronically via Wide Area WorkFlow. The contract includes extensive compliance provisions related to labor practices, trafficking prevention, Buy American requirements, prohibitions on sourcing from the Xinjiang region and the Maduro regime, and security restrictions on telecommunications equipment. The award will prioritize best value, combining technical acceptability and price competitiveness, with no set-aside for small or disadvantaged businesses; however, offerors must disclose their status. The government will not issue additional solicitation documents beyond this RFQ.
Power, Distribution, and Specialty Transformer Manufacturing

POSTED

5 days ago

DEADLINE

in 3 days
View Details
NAICS: 811210
Federal
MUOS Satellite Simulator Maintenance
Solicitation # F2MTN76173AW16
The Air Force Life Cycle Management Center, Cryptologic and Cyber Systems Division Contracting Branch intends to award a sole-source fixed-price contract to W5 Technologies, Inc. for maintenance and support services related to the W5 Mobile User Objective System, with performance extending through July 30, 2027. This action is justified under 10 U.S.C. 2304(c)(1) and FAR 6.103-1 because the required technical support is not available from any other responsible source, and no other contractor can meet the government’s specific needs. The contract is not yet solicited; this notice serves as a pre-solicitation announcement to identify any other potential sources capable of fulfilling the requirement. Interested parties must submit a written qualification package by 3:00 PM CST within fifteen days of the notice’s publication, including their business information, detailed capability statement, past performance references, and proof of authorization from W5 Technologies, Inc. to perform the work. All submissions will be treated as proprietary and will not be compensated or returned. The anticipated award date is by the end of August 2026, with the point of contact for submissions being Rachel Sexton and Lee Escobar. The work is to be performed at San Antonio, Texas, under NAICS code 811210, and the official solicitation number is F2MTN76173AW16.
Electronic and Precision Equipment Repair and Maintenance

POSTED

9 days ago

DEADLINE

in 7 days
View Details
NAICS: 541990
Federal
Vendor Information Response for RFIVendors are invited to respond to a Request for Information seeking detailed information on capabilities, experience, and socio-economic status to support a subcontract under the NAICS code 541990. The response must be submitted by August 25, 2026, at 9:00 PM Eastern Time, with the solicitation issued by the Department of Defense through the FA8307 Aflcmc Hnck Hnc Cyber & Ntr office. The primary place of performance is located in San Antonio, Texas, with a zip code of 78226. This RFI is not classified as a set-aside and does not specify an organization type or point of contact. Participation involves providing comprehensive documentation to demonstrate technical expertise, past performance, and any relevant socio-economic qualifications relevant to defense-related cyber and network services. The opportunity is accessible online through the SAM.gov portal for further details and submission.
All Other Professional, Scientific, and Technical Services

POSTED

10 days ago

DEADLINE

in 25 days
View Details
NAICS: 334290
Federal
Request for Information (RFI) - Yoshida Tactical CHVP Inline Encryptor
Solicitation # FA8307-26-R-CHVPInlineEncryptor
The U.S. Department of Defense, through the Air Force Life Cycle Management Center, has issued a Request for Information (RFI) to gather industry input on the development and feasibility of a Small Form Factor (SFF) CHVP Inline Encryptor, specifically under the Yoshida Tactical program. This RFI, identified by solicitation number FA8307-26-R-CHVPInlineEncryptor, was posted on July 22, 2026, with responses due by August 25, 2026, and is aimed at identifying potential vendors capable of delivering secure, compact encryption solutions tailored for tactical environments. The effort is centered at the agency’s office in San Antonio, Texas, with performance expected to occur in the same location, and technical inquiries should be directed to Zachary Bassett as the primary point of contact, with Aaron Hoffman as the secondary contact. The RFI does not constitute a request for proposal or a commitment to award a contract; rather, it seeks market research to inform future acquisition strategies and operational requirements for encrypted communication systems that meet critical size, weight, and performance constraints. The agency is evaluating industry capabilities to determine technical feasibility, scalability, compatibility with existing platforms, and adherence to security standards for the CHVP Inline Encryptor in a small form factor. No set-aside provisions or NAICS codes are specified at this stage, and responses should focus on technical capabilities, past performance, and availability of the proposed solution, with all submissions directed through the official SAM.gov portal link provided.
Other Communications Equipment Manufacturing

POSTED

10 days ago

DEADLINE

in 25 days
View Details