This Sources Sought opportunity from Department Of Defense was posted on June 1, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Sources Sought for NSN 1650-00-807-9555

Closed

SPE4A726R0643-Sources_SoughtFederal

Submission Closed06/08/2026, 06:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 336413

New

Federal

16--REGULATOR,OXYGEN,DIThis contract pertains to the procurement of 40 units of an oxygen regulator (NSN 7R-1660-015303496-FZ) with delivery terms FOB origin. It represents a follow-on request for proposal (RFP SPRPA1-26-C-YC01) after the cancellation of a previous solicitation, maintaining the same requirement under procurement request number N0038325X1607. Due to the specialized nature of the part, which is flight critical and requires engineering source approval by the design control activity, only previously government-approved sources with unique design capabilities, manufacturing knowledge, and retained technical data are eligible for consideration. The data and expertise needed to maintain quality are not commercially available, so new sources must undergo rigorous qualification procedures approved by the government engineering activity to be considered. The contract action is conducted under a non-competitive procurement strategy per FAR 6.302-1, though all responsible sources may submit expressions of interest or proposals within 45 days for consideration. Prospective bidders not already approved as sources must provide extensive technical data in accordance with NAVSUP Weapon Systems Support source approval brochures to be considered. Timeliness of source approval is critical; if new source qualification cannot be completed before government requirements, awards may proceed with existing sources to meet fleet support needs. The government is not applying commercial item acquisition policies for this solicitation, emphasizing the technical and critical nature of the item. The contracting office overseeing this action is located at DLA Aviation in Philadelphia, PA, with a designated point of contact for inquiries. Access to relevant military specifications and standardized documents is facilitated through government repositories, ensuring compliance and proper evaluation of technical qualifications.

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

ACTUATOR,ELECTRO-METhe contract pertains to the solicitation for the procurement of an electro-mechanical actuator, identified by solicitation number SPRPA126QVB83, posted on May 13, 2026, with a response deadline of June 12, 2026. This procurement is managed by the Department of Defense through the Defense Logistics Agency (DLA) Aviation Office in Philadelphia, PA. The contract falls under the NAICS code 336413, which covers aerospace product and parts manufacturing. Key points include adherence to mandatory federal regulations such as item unique identification and valuation requirements, higher-level contract quality standards, and compliance with Buy American and Free Trade Agreements regulations effective through 2024. The solicitation is issued under Emergency Acquisition Flexibilities to expedite the process, with priority rating designated for national defense and emergency preparedness use. The contract also mentions administrative and operational procedures such as the use of Wide Area Workflow for payment instructions, mandatory use of Workflow Pro for modification assistance, and compliance with equal opportunity requirements for veterans and workers with disabilities. Contact information is provided for the primary point of contact at DLA Philadelphia, and all invoicing and delivery instructions are in accordance with specified federal and military standards. Security prohibitions and certifications are also noted, reflecting the contract’s strict adherence to federal acquisition and regulatory policies. The procurement’s place of performance is not specified, but its management and oversight rest with the Philadelphia office of the DLA Aviation agency.

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

Procurement for Spare Parts for the Pilot, Co-Pilot, and Mechanic Seats for the MH-65E Aircraft.The United States Coast Guard Aviation Logistics Center in Elizabeth City, NC, is soliciting quotations for an Indefinite Delivery Requirements contract with BAE Systems Land & Armaments, L.P. for spare parts specifically for pilot, co-pilot, and mechanic seats on the MH-65E aircraft. This procurement is being conducted on a sole source basis under FAR 12.102(b), as BAE is the original equipment manufacturer and sole distributor within North America capable of supplying the required parts. The contract will have a one-year base period with the potential for four additional one-year options, not to exceed five years total. Only new, approved parts with certificates of conformance and full traceability to the manufacturer will be accepted, ensuring compliance with FAA and military standards critical to flight safety. Substitutes or alternate parts will not be considered. The solicitation number 70Z03826RB0000006 is a combined synopsis/solicitation issued as a Request for Quotation, with no formal solicitation document to follow. Key dates for offer submissions have been extended multiple times, with the final due date set for June 16, 2026, at 4:30 pm EDT. Quotations must be electronically submitted via email with the solicitation number referenced; phone call offers are not accepted. The government reserves the right to make single or multiple awards or no award at all, with the intent to award based on the lowest overall cost including administrative expenses. No drawings, specifications, or schematics are available from the agency, and all procurements must maintain the highest standards of quality to ensure the safety and airworthiness of Coast Guard aircraft.

Aviation Logistics Center (ALC)(00038)

POSTED

DEADLINE

NIIN: 016230912/NOMEN: RECEIVER TRANSMITTERThe Department of Defense, through NAVSUP Weapon Systems Support in Philadelphia, intends to award a sole source contract to Lockheed Martin for the repair of a specific Receiver Transmitter unit identified by part number 300A380-3 and NIIN 016230912. This procurement will be carried out under NAICS code 336413 and FSC code 1680. Since there are no drawings or data available and the government does not own data rights to this component, Lockheed Martin is anticipated to be the only capable source to perform the repair. The contract will be issued under an existing Basic Ordering Agreement, and other firms wishing to compete must submit a Source Approval Request, although approval will not delay the procurement process. The government plans to solicit and negotiate this repair using FAR Part 15 provisions rather than FAR Part 12, based on market research indicating the specialized nature of the repair. While this is a sole source action, the government invites any interested parties to submit capability statements or proposals within 35 days, which will be reviewed to determine if competition is feasible. Responses must be submitted electronically via NECO, and no phone or hard copy requests will be entertained. The point of contact for this solicitation is Kate N. Schalck, who can be reached via email for submission or inquiries. The response deadline is June 16, 2026.

Navsup Weapon Systems Support

POSTED

DEADLINE

NIIN: 012212619/ NOMEN: SUPPORT ASSEMBLY,BELLCRANK

Navsup Weapon Systems Support

POSTED

about 23 hours ago

DEADLINE

in 6 days

AI Contract Overview

The Defense Logistics Agency (DLA) Weapons Support is conducting market research through a Sources Sought Notice to identify companies capable of manufacturing or legitimately obtaining the hydraulic system jack, NSN 1650-00-807-9555. This item is currently produced by Parker Hannifin Corp. and must meet the specifications outlined in MIL-DTL-5508C Not 2, Revision 4, with quality assurance standards up to April 2025. The notice seeks information from qualified businesses that can match or exceed the existing product quality as required by DLA Aviation. Interested parties are invited to submit responses by June 8, 2026, via email to the designated acquisition specialist, Gladys Brown. This notice is strictly for informational purposes and is not a solicitation or request for offers; no contract will be awarded solely based on responses, nor will the government compensate submission costs. Companies wishing to become approved sources must submit an application through the Source Approval Request (SAR) Program, providing comprehensive technical documentation that demonstrates their capability to produce an equal or superior product. The SAR package submission process varies depending on whether there is an open solicitation, and all applications without an open solicitation should be directed to the DLA Weapons Support SAR Program Office in Richmond, VA. The primary contact for inquiries is Gladys Brown, reachable by email or phone.

General Info

DLA seeks manufacturers for hydraulic system jack meeting MIL-DTL-5508C specs, responses due June 2026.

Agency

Department Of Defense → DLA Aviation

NAICS

336413 - Other Aircraft Parts and Auxiliary Equipment Manufacturing View NAICS

Place of Performance

Set-Aside

NONE

Documents

(1)

Aviation+Source+Approval+and+Management+Handbook+JACG+SAM+HB+03-16-11.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedJun 1

Sources Sought

Response DeadlineJun 8

Deadline has passed

Submission Closed

06/08/2026, 06:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → DLA Aviation

Contacts1 person available

OfficeRICHMOND, VA, 23237, USA

Organization / Agency

Department Of Defense → DLA Aviation

Office AddressRICHMOND, VA, 23237, USA

Contacts

Gladys Brown

contact@example.gov

+1 (555) 000-0000

Full Description

Defense Logistics Agency (DLA) Weapons Support is issuing this Sources Sought Notice as a means of conducting market research to determine if other companies are capable of manufacturing (or legitimately obtaining) the following item: NSN 1650-00-807-9555, hydraulic system jack. This item is currently manufactured by Parker Hannifin Corp. (CAGE 98441) under basic specification MIL-DTL-5508C Not 2, Revision 4, dated 03/28/22, part piece number W831-8-40 / AN6281-8-40, QPL-5508-QPD, dated 04/17/2025. The Weapon System Designator Code is 11F.

This Sources Sought Notice is for informational purposes only. This is not a request for an offer. This does not constitute as a solicitation and shall not be construed as a commitment by the Government. Responses in any form are not offers and the Government is under no obligation to award a contract as a result of this announcement. No funds are available to pay for preparation of responses to this announcement. Any information submitted by respondents to this technical description is strictly voluntary.

Interested parties who consider themselves qualified to manufacture (or legitimately obtain) the above listed supplies are invited to submit a response to this Sources Sought Notice by June 8, 2026, 2:00pm eastern standard time. All responses under this Sources Sought Notice must be emailed to Gladys Brown (gladys.brown@dla.mil).

Contracting Office Address: 6090 Strathmore Rd., Richmond, VA 23237

Primary Point of Contact: Gladys Brown, Acquisition Specialist, Phone: 445-737-4113, Email: gladys.brown@dla.mil.

If your company desires to be reviewed and qualified as an "Approved Source" for this item, submit an application package through the Source Approval Request (SAR) Program as outlined in the attached JACG SAM HB document. A SAR package contains all of the technical data needed to demonstrate that the prospective contractor can competently manufacture the product to the same level of quality, or better, than the required item. The onus is on the contractor to document and demonstrate their product is equal to, or better, than the currently approved item, which DLA Aviation is procuring.

If there is an open solicitation for an NSN which you want to submit a SAR, please submit the SAR directly to the buyer noted on the solicitation.

If you are submitting a SAR for an NSN with no open solicitation, please send it to the DLA SAR Program Office address below:

DLA Weapons Support SAR Program Office

Attn: DLA AVN-DU (SAR Program Manager)

6090 Strathmore Rd.

Richmond, VA 23237

Northgate Technology Partners LLCUEI: G4C8E6Y2U0I7CAGE: 2W6Y9$7,213,456View Profile

Northgate Technology Partners LLCUEI: G4C8E6Y2U0I7CAGE: 7P1R4$31,089,772View Profile

Northgate Technology Partners LLCUEI: F9H2D7S5V3A1CAGE: 5A3C7$2,847,391View Profile

Northgate Technology Partners LLCUEI: M1P3R5T7V9X2CAGE: 9X7Z2$2,847,391View Profile