This Sources Sought opportunity from Department Of Defense was posted on June 24, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Sources Sought: Monopole Tower Procurement and Base Foundation Construction (577 SWES/DIFF)

Closed

W50S83-26-Q-0010Federal

Submission Closed07/08/2026, 09:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 238110

New

26_1119 – Robbinsdale-MN

Solicitation # 261119-robbinsdale-mn

POSTED

DEADLINE

Hickman Reservoir and Pump Station – 26_1109 – Hickman-NE

Solicitation # hickman-reservoir-pump-station-261109-hickman-ne

Caldwell Tanks, Inc. is seeking subcontractors for the construction of the Hickman Reservoir and Pump Station project located in Hickman, Nebraska. This small business set-aside solicitation includes opportunities for various specialized trades, specifically site work, tank painting, electrical installation, and fencing. Interested parties must submit their responses by November 5, 2026. The primary point of contact for this opportunity is Eric Koetter, who can be reached via email or phone for further coordination regarding the project requirements and submission process.

POSTED

DEADLINE

Elbon Tank #2, Schedule 2- Elevated Tank Project

Solicitation # elbon-tank-2-schedule-2-elevated-tank-project

Caldwell Tanks, Inc. is seeking subcontractors for the Elbon Tank #2, Schedule 2 Elevated Tank Project located in Phillip, South Dakota. This solicitation focuses on several specialized scopes of work, including site work under NAICS 238910, tank painting under NAICS 238320, and electrical work under NAICS 238210. The opportunity is set aside for small businesses, specifically targeting Small Disadvantaged Businesses and Disadvantaged Business Enterprises. Interested parties must submit their responses by the deadline of November 13, 2026. Primary coordination for this project is managed by Eric Koetter.

POSTED

DEADLINE

Concrete Paving Contractor

POSTED

DEADLINE

Concrete Structural & FlatworkThis subcontract for Concrete Structural and Flatwork involves providing concrete forming, placing, and finishing services for prime contractors on pump station projects for the City of Lawrence, Kansas. The scope of work specifically includes the construction of Chemical Feed Concrete Containment Structures 1 and 2, as well as Manhole 2350. Additionally, the contractor is responsible for performing concrete crack and surface repairs and installing precast structural concrete to deliver completed containment structures and manholes. Managed by MSO - CMED in Kansas under NAICS code 238110, the opportunity was posted on October 27, 2026. Interested parties must submit their responses by the deadline of December 8, 2026.

POSTED

DEADLINE

Abutment & Foundation ConstructionThis subcontract for Abutment and Foundation Construction involves performing excavation and installation of bridge abutment foundations for prime contractors on BC Timber Sales bridge projects. The scope of work includes executing abutment excavation, foundation construction, and the installation of structural elements utilizing concrete forms and excavators to deliver completed and inspected foundations. The project is managed under the Province of British Columbia's BC Timber Sales Branch and requires strict adherence to WorkSafe BC regulations and environmental sediment protections. Interested parties must respond by November 12, 2026, for work to be performed within Canada.

BC Timber Sales Branch

POSTED

DEADLINE

Marine Pile Crack Repair and Epoxy Injection

Enterprise Facilities

POSTED

DEADLINE

Lighting Foundation ConstructionThis subcontract for Lighting Foundation Construction involves performing concrete forming and pouring for lighting structure supports on State Highway Administration projects in Maryland. The selected contractor will be responsible for installing concrete foundations for lighting poles and structures utilizing rebar and specialized forming equipment to deliver completed installations for prime contractors. The project falls under NAICS code 238110 and requires strict adherence to Standard Federal EEO and Title VI compliance. Interested parties must submit their responses by the deadline of December 3, 2026.

State Highway Administration

POSTED

DEADLINE

Concrete Forming and Finishing SubcontractorThis subcontract opportunity is for a Concrete Forming and Finishing Subcontractor to provide manual labor for City of Tampa Parks and Recreation projects. The selected contractor will work under prime contractors to handle the preparation and finishing of concrete pours, which includes setting up frames for forming as well as smoothing and detailing surfaces using floats and screeds. The final deliverable consists of completed concrete forms and professionally finished surfaces. To be eligible, contractors must possess a valid Florida State License and provide proof of insurance. Additionally, a Port Access Badge is required for any work performed at Port of Tampa sites. Interested parties must submit their responses by November 2, 2026, at 5:00 PM.

POSTED

DEADLINE

Noise Barrier ConstructionThis subcontract opportunity involves the construction of noise barriers and walls for prime contractors working on Maryland State Highway Administration highway projects. The scope of work requires the delivery of a complete installed noise barrier system, which specifically includes the installation of both foundations and wall panels. The project is categorized under NAICS code 238110 and was posted on October 27, 2026. Interested parties must submit their responses by the deadline of December 3, 2026.

State Highway Administration

POSTED

DEADLINE

Concrete and ADA Accessibility UpgradesThis subcontract for Concrete and ADA Accessibility Upgrades involves the installation of ADA-compliant sidewalk ramps and driveway upgrades for prime contractors working on Maryland State Highway Administration roadway projects. The scope of work includes the removal of non-compliant curbs and ramps, necessary grading, and the pouring of new concrete utilizing specific ADA-compliant ramp templates to ensure full adherence to ADA Accessibility Standards. The project is categorized under NAICS code 238110 and is managed by the State of Maryland. Interested parties must submit their responses by the deadline of December 3, 2026. The primary objective of the contract is the successful delivery of fully installed, compliant accessibility infrastructure across designated roadway sites.

State Highway Administration

POSTED

DEADLINE

Concrete Pedestrian & Cyclist InfrastructureThis subcontract for Concrete Pedestrian and Cyclist Infrastructure involves the installation of sidewalks, curbs, gutters, pedestrian ramps, and bicycle lanes for prime contractors on Maryland Department of Transportation State Highway Administration projects in Allegany County. The scope of work focuses on the construction of a 0.97-mile stretch of continuous sidewalks and bike lanes utilizing concrete and forming equipment. A critical requirement of the project is ensuring that all pedestrian ramps are constructed to meet ADA-compliant specifications and MDOT SHA standards. The final deliverable is a fully completed sidewalk and bicycle lane network. Interested parties should note the response deadline of December 3, 2026.

State Highway Administration

POSTED

about 17 hours ago

DEADLINE

in about 1 month

AI Contract Overview

This is a sources sought notice issued by the U.S. Department of Defense through the 577 SWES/DIFF office for market research on the geotechnical evaluation, procurement, and foundation construction of 100-foot monopole towers in support of the GASNT Increment 2, Block 1 program. The notice explicitly states no solicitation is active and no contract will be awarded based on responses; it is solely for evaluating industry capability. Contractors must be capable of designing and building foundations in strict compliance with ANSI/TIA-222 Risk Category 4 and ACI 318 standards, procuring 100-foot hot-dip galvanized steel monopoles per ASTM A123, and delivering all required documentation including PE-stamped as-built drawings, geotechnical surveys, structural calculations, and materials certifications. The scope includes installation of three factory-installed grounding studs, a top lightning protection port, specified port configurations, and two 4-inch and one 1.5-inch SCH 80 PVC conduits, but explicitly excludes tower erection, antenna installation, cabling, system testing, and FAA Form 7460-1 compliance, which remain under government or follow-on contractor responsibility. Performance is required across seven military installations nationwide with strict deadlines ranging from November 2026 to July 2027, and contractors must demonstrate the ability to operate under military base security protocols including background checks, ID badge requirements, escort rules, and on-site waste management with off-base disposal certification. All engineering drawings must be signed and sealed by a licensed Professional Engineer in the state of performance, and a 24-hour advance notice must be provided for government QA inspection prior to concrete pours, accompanied by photo documentation of rebar and conduit embedment. Submissions must include company profile with CAGE and UEI codes, NAICS 238110 classification as a small business, past performance evidence on similar DoD projects, and proof of PE licensing availability across seven states. Deliverables must also include a one-year warranty, transferred manufacturer warranties, Bill of Materials, Operations and Maintenance Manuals, and a signed Certificate of Compliance for all applicable standards. The solicitation number is W50S83-26-Q-0010, responses are due by July 8, 2026, and all submissions must be directed to the 101st Contracting Office in Bangor, Maine.

General Info

Market research for geotechnical foundations on 100-ft monopole towers per ANSI/TIA-222 and ACI 318, 12-month delivery, small business set-aside.

Agency

Department Of Defense → W7NC Uspfo Activity Meang 101

NAICS

238110 - Poured Concrete Foundation and Structure Contractors

Place of Performance

Bangor, ME, USA

Set-Aside

SBA

Documents

SOW V4 23 June 2026 - GASNTi2 Block 1 Tower Procurement

sow

High

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedJun 24

Sources Sought

Response DeadlineJul 8

Deadline has passed

Submission Closed

07/08/2026, 09:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → W7NC Uspfo Activity Meang 101

Contacts2 people available

OfficeBANGOR, ME, 04401-8005, USA

Organization / AgencyDepartment Of Defense → W7NC Uspfo Activity Meang 101

Office AddressBANGOR, ME, 04401-8005, USA

Contacts

st Contracting Office

Daniel Curtis

Full Description

Geotechnical Evaluation, Procurement, and Foundation Construction for 100-Foot Monopole Towers (GASNT Increment 2, Block 1)

1.0 DISCLAIMER

This is a Sources Sought Notice for market research purposes only. This is NOT a Request for Proposal (RFP), Request for Quotation (RFQ), or an Invitation for Bid (IFB). No solicitation is being issued at this time, and this notice shall not be construed as a commitment by the Government to issue a solicitation or ultimately award a contract. Responses will not be considered as proposals, nor will any award be made as a result of this synopsis. The Government will not be responsible for any costs incurred by interested parties in responding to this notice.

2.0 BACKGROUND AND OBJECTIVE

The Government (577 SWES/DIFF) requires specialized contractor support to perform geotechnical evaluations, procure 100-foot monopole towers, and construct supporting foundations at multiple military installations nationwide. This infrastructure will prepare the sites for subsequent tower erection and system integration (performed by others) in support of the GASNT Increment 2, Block 1 system.

3.0 SCOPE OF WORK SUMMARY

The Contractor will be responsible for engineering, procurement, and foundation construction. The primary design standard for this effort is ANSI/TIA-222 (Risk Category 4).

Requirement CategoryDescription

Tower SpecificationsProcure 100-foot monopole (hot-dip galvanized steel per ASTM A123) capable of supporting four (4) Vertically Polarized VHF/UHF Dipole Antennas and a universal ring mount.

Port & Conduit ConfigurationMinimum ports: One (1) 10x24 inch base port, two (2) 6x12 inch top ports. Foundation conduits: Two (2) 4-inch SCH 80 PVC and one (1) 1.5-inch SCH 80 PVC.

Grounding & LightningThree (3) factory-installed grounding studs at the base; one (1) threaded lightning protection port at the top.

Foundation EngineeringDesigned in strict accordance with ANSI/TIA-222 and ACI 318. Anchor bolt placement tolerance of +/- 1/16 inch. All final drawings must be stamped by a Licensed Professional Engineer (PE) for the state of performance.

Site ComplianceFull compliance with military base security, traffic laws, and safety regulations. Escort/ID badge rules apply. Contractor must provide their own trash receptacles and handle off-base disposal.

Excluded Tasks (By Others)

The following tasks are explicitly excluded from the contractor's scope and will be handled by the Government or follow-on entities:

Installation/erection of the tower structure itself.
Site grounding fields and lightning protection installation.
Installation of active equipment (antennas, electronic cabinets).
Routing of coax or fiber optic cables.
System testing (RF sweeps, PIM testing, commissioning).
FAA Form 7460-1 compliance.

4.0 PLACES OF PERFORMANCE & SCHEDULE

The total project duration must not exceed 12 months from the date of award. Respondents must be capable of meeting the schedule and deploying to the following locations:

Site NameLocation / GPS CoordinatesCompletion NLT Date

McConnell AFBWichita, KS (37.633213°N 97.255741°W)1 Nov 2026

Goldwater33.425333, -112.0130231 Dec 2026

Fairchild AFB47.631517, -117.6458091 Feb 2027

Tinker AFB35.4102889, -97.39659171 Mar 2027

Grissom ARB40.662687, -86.1551821 Apr 2027

Kirtland AFB Albuquerque, NM (35.049508°N 106.548388°W)1 May 2027

General Mitchell TBD1 July 2027

5.0 DELIVERABLES & QUALITY ASSURANCE

Capability statements must reflect the ability to provide comprehensive documentation and testing, including but not limited to:

Deliverable TypeKey Elements

Engineering & DesignGeotechnical surveys, structural design calculations, PE-stamped As-Built drawings, and a Letter of Compatibility.

Testing & QAConcrete cylinder break test reports, 24-hour mandatory QA inspection notice prior to concrete pour, and photo documentation of rebar/conduit embedment.

Certifications & WarrantiesMinimum 1-year project warranty, transferred manufacturer warranties, galvanizing/steel mill certs, and a global Certificate of Compliance to TIA-222, ACI 318, and ASTM A123.

LogisticsBill of Materials (BOM) and Operations & Maintenance (O&M) Manuals for the tower and climbing systems.

6.0 CAPABILITIES STATEMENT INSTRUCTIONS

Interested parties should submit a Capabilities Statement addressing their ability to fulfill the requirements detailed above. Responses should be concise and include:

Company Profile: Company Name, CAGE Code, UEI, Point of Contact, and business size/socio-economic status (e.g., 8(a), HUBZone, SDVOSB, WOSB, Small Business, or Large Business) under the anticipated NAICS code.
Relevant Experience: Brief descriptions of past performance on similar nationwide tower procurement and foundation construction projects (preferably within DoD environments) executed within the last five (5) years.
Engineering Capacity: Confirmation of ability to provide PE-stamped drawings in the required states (KS, AZ, WA, OK, IN, NM, WI).
Security & Logistics: Statement of capability regarding deployment to multiple nationwide military installations, adhering to strict base access, badging, and background check requirements.

If you have any questions with the Statement of Work, please add them to you capabilities submission and we will compile them and send a reply.