Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

SPACER, PLATE

Active
SPE4A7-26-T-617PFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of 77 units of a SPACER, PLATE with NSN/Part Number 5365-00-768-1020 under solicitation SPE4A7-26-T-617P, issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. Delivery is required within 233 days from award, with performance taking place in Corpus Christi, Texas, 78419-5255. The solicitation was posted on August 5, 2026, with responses due by August 13, 2026, and is classified under NAICS code 332510. This item is subject to a comprehensive set of technical, quality, and compliance requirements defined by the DLA Master List of Technical and Quality Requirements, including specific clauses such as RD002 on Covered Defense Information, RQ017 on physical identification and bare item marking, and RQ032 on export control. Technical data associated with this item is subject to ITAR or EAR regulations, restricting disclosure to foreign persons both within and outside the U.S., and requires compliance with DFARS 252.225-7048. Access to controlled data is limited to contractors certified under the US/Canada Joint Certification Program, who have completed mandatory DOD export control training and been formally approved by DLA. Packaging, government identification removal, and cybersecurity compliance including CMMC Level 2 certification for third-party assessors are also mandatory.

General Info

Procure 77 spacer plates under DOD solicitation, deliver in 233 days, comply with ITAR, CMMC Level 2, and export control rules.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

332510 - Hardware ManufacturingView NAICS

Place of Performance

DDCT-S 540 FIRST STREET SE, CORPUS CHRISTI, TX, 78419-5255, US

Set-Aside

NONE

Documents

(1)

SPE4A7-26-T-617P.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV
View Agency Profile
Office AddressUS
Contacts
Dedrick Benson
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SPACER,PLATE
** SPACER, PLATE
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RD002, COVERED DEFENSE INFORMATION APPLIES
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 5365-00-768-1020 Quantity: 77 EA Purchase Request: 7017529083QTY: 77 Delivery: 233 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332510
New
DIBBS
Supply of Machine Thread Plugs (NSN: 5365-011146444)The contract entails the supply of standardized machine thread plugs designated by NSN 5365-011146444, manufactured to meet military specifications for precision applications in defense or industrial systems. These components are critical for ensuring thread integrity and dimensional accuracy in high-stakes operational environments, requiring strict adherence to quality and performance standards. The offering is structured as a subcontract with recurring delivery obligations, indicating an ongoing need for these hardware items across multiple procurement cycles. The solicitation was posted on August 5, 2026, with a response deadline of August 12, 2026, and is administered by the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense. The North American Industry Classification System code 332510 identifies the category as machine shop and related services, underscoring the manufacturing and precision machining nature of the work. Performance is expected to be coordinated under DLA-managed logistics channels, though specific delivery locations are not outlined. Interested parties must respond through the official DIBBS portal prior to the deadline to be considered for award.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 1 hour ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
BRACKET, MOUNTING
Solicitation # SPE7LX-26-U-9329
The contract pertains to the procurement of a Right Hand Single Arm Mounting Bracket, identified by NSN 5340016150030 and OSHKOSH DEFENSE LLC part number 3764286, with a total quantity of 176 units. Delivery is required within 116 days under FOB Origin terms, with no variance allowed in quantity, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods, unit container type D3, and marking per MIL-STD-129 with no special marking codes. Packaging and palletization must adhere to DLA’s official procurement requirements, and hazardous materials handling provisions apply if relevant. The contract is issued under a Small Business Set-Aside, with the solicitation number SPE7LX-26-U-9329 and a response deadline in August 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with sampling procedures following MIL-STD-1916 or ASQ H1331, and zero non-conformances expected unless otherwise stated. Identification of U.S. military property must conform to MIL-STD-130N. The unit of issue is each, priced at $176.00 per unit, for a total estimated price of $30,976.00, though this amount is not guaranteed for full purchase by the IDC.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 1 hour ago

DEADLINE

in 15 days
View Details
NAICS: 332510
New
DIBBS
CLAMP, LOOP
Solicitation # SPE7L1-26-T-917N
This contract, identified by solicitation number SPE7L1-26-T-917N, is for the procurement of 346 units of a clamp and loop component with NSN 5340-01-030-4980, priced at $346.00 per unit, totaling $119,716.00. Delivery is required FOB origin within 119 days, with the original delivery date set for November 25, 2026, and a needed ship date of December 15, 2026. All supplies must comply with stringent technical and quality requirements drawn from the DLA Master List of Technical and Quality Requirements, with specific mandates including MIL-STD-130N for identification marking, MIL-STD-1916 or ASQ H1331 for zero-defect sampling, and strict adherence to packaging standards per MIL-STD-129 and RP001. The use of Class I ozone depleting chemicals is strictly prohibited, and any substitution requires prior approval. Compliance documentation such as the Certificate of Quality Compliance is mandatory, and the Certificate of Conformance procedures under FAR 52.246-15 are authorized unless overridden by a Quality Assurance Letter of Instruction. The item must be shipped to the designated delivery point at DLA District San Joaquin, 25600 S Chrisman Road, Rec Whse 57, Tracy, CA 95304-5000, with packaging requirements depending on hazardous material status per FED-STD-313: non-hazardous items follow ASTM D3951 unless superseded by DLA requirements, while hazardous items must comply with TQ requirement IP025. Palletization must conform to DLA packaging guidelines, and all packaging and labeling must meet MIL-STD-129 with correct Unit of Issue and Quantity per Unit Pack as specified. The contract mandates full and open competition with no set-asides, and all technical data and revisions referenced, including TDP Rev A Gen 1 based on drawing NR 19207, take precedence. Transportation directives are governed by DLAD Proc Notes C19 and C20, and the official point of contact for procurement inquiries is Isabelle Szulewski, reachable via email and phone listed in the contract.
LAND SUPPLY CHAIN

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 332510
New
DIBBS
BRACKET, MOUNTING
Solicitation # SPE7LX-26-U-9318
The contract pertains to the procurement of 631 units of a mounting bracket identified by NSN 5340-01-647-8723 under purchase request 1000239184. The solicitation, numbered SPE7LX-26-U-9318, was posted on August 5, 2026, with a response deadline of August 20, 2026, and requires delivery within 113 days of award. The item falls under NAICS code 332510 and is being sourced by the Department of Defense through the Strategic Acquisition Program Directorate. The contract incorporates all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation issuance or award date depending on the acquisition size. Government identification must be removed from any non-accepted supplies. The primary point of contact is Theodore Misiolek, reachable via email and phone, and all submissions must be made through the DIBBS platform.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 1 hour ago

DEADLINE

in 15 days
View Details
NAICS: 332510
New
DIBBS
CRANK, HAND
Solicitation # SPE7LX-26-U-9330
The contract pertains to the procurement of 180 units of a hand crank identified by part number 1103-1945-01 and NSN 5340016237876 under solicitation SPE7LX-26-U-9330, issued by the Department of Defense’s Strategic Acquisition Program Directorate. Delivery is required within 76 days FOB origin with no variance allowed in quantity, and acceptance is to occur at the destination point. Packaging must comply with DLA’s Master List of Technical and Quality Requirements, which supersede all other standards, including ASTM D3951 for non-hazardous items and FED-STD-313 for hazardous material classifications. All packaging and labeling must adhere to MIL-STD-129 and palletization must follow RP001 DLA Packaging Requirements. The supply is covered under DLA Direct, CONUS, and the unit of issue is each, with a total price of $180. Documentation for source approval must be submitted if proprietary or insufficient data exists, and government identification must be removed from non-accepted supplies. The contract’s technical specifications are derived from the DLA Master List, the applicable revision of which is controlled by the solicitation issue date. Point of contact for inquiries is Theodore Misiolek, with the response deadline set for August 20, 2026.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 1 hour ago

DEADLINE

in 15 days
View Details
NAICS: 332510
New
DIBBS
LEVER (FPC)
Solicitation # SPEFA3-26-Q-0054
The contract pertains to the procurement of 8 units of a lever designated as FPC with part number 70209-21221-113 and NSN 1560-LLQJ59653, under solicitation SPEFA3-26-Q-0054, issued by the DLA Fleet Readiness Center Southeast. The contract specifies a firm fixed price with no variance allowed in quantity, requiring delivery within 30 days after award at destination with inspection and acceptance also occurring at the destination. The item is to be packaged in compliance with ASTM D3951, though all DLA Master List of Technical and Quality Requirements take precedence, and packaging must be marked and labeled per MIL-STD-129. Palletization must adhere to DLA Packaging Requirements, and unit of issue and packaging quantity must match contract specifications. Item Unique Identification is not required per the service customer’s request, with DFARS 252.211-7003(c)(1)(i) applicable. Sampling for quality verification follows MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stipulated; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The delivery address for freight shipping and parcel post is specified as the Fleet Readiness Center Southeast in Jacksonville, Florida, with the required delivery date set for August 4, 2026.
DLA FLEET READINESS CENTER SOUTHEAST

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
CLAMP, LOOP
Solicitation # SPE7LX-26-U-9327
The contract pertains to the procurement of 2,082 units of CLAMP, LOOP with NSN 5340-01-485-6847 under solicitation SPE7LX-26-U-9327, which was posted on August 5, 2026, with a response deadline of August 20, 2026. The acquisition is a Total Small Business Set-Aside as defined by FAR 19.5, classified under NAICS code 332510, and managed by the Strategic Acquisition Program Directorate within the Department of Defense. Delivery is required within 116 days after award, and the contract incorporates technical and quality requirements referenced by R or I numbers from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or amendment date. Packaging must comply with DLA standards, and non-accepted supplies must have all government identification removed per RQ011. The point of contact for inquiries is Theodore Misiolek, reachable via email or phone provided.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 1 hour ago

DEADLINE

in 15 days
View Details
NAICS: 332510
New
DIBBS
BRACKET, MOUNTING
Solicitation # SPE7L1-26-Q-1458
The item specified is a mounting bracket with NSN/Part Number 5340-01-670-3301, with a quantity of one unit and a delivery requirement of 159 days after order. Technical and quality requirements referenced in this solicitation are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless an amendment supersedes it. Packaging must comply with DLA packaging standards, and non-accepted supplies must be stripped of all government identification prior to return. Technical data associated with this item is subject to export controls under either ITAR or EAR, prohibiting any export or disclosure to foreign persons without prior authorization from the Department of State or Department of Commerce, including foreign national employees and foreign subsidiaries of U.S. firms. Access to this controlled data is restricted only to DLA contractors with an approved US/Canada Joint Certification Program certification, who have completed mandatory DOD export control training and the DLA Export-Controlled Technical Data Questionnaire, and have received formal approval from the DLA controlling authority. The solicitation number is SPE7L1-26-Q-1458, posted on August 5, 2026, with responses due by August 12, 2026, and the North American Industry Classification System code is 332510. Performance is required at Oak Harbor, WA 98278-5200, and inquiries should be directed to Vittorio Tambaro at the provided contact details.
LAND SUPPLY CHAIN

POSTED

about 1 hour ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
CATCH, FLUSH
Solicitation # SPE7LX-26-U-9307
The contract pertains to the procurement of 806 units identified by NSN 5340-01-097-4918 under solicitation SPE7LX-26-U-9307, with a delivery requirement of 118 days after award. It mandates compliance with the Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment and incorporates requirements for Covered Defense Information as defined under RD002. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition type. Packaging must adhere to DLA packaging standards, and any non-accepted supplies must have all government identification removed prior to disposition. The solicitation was posted on August 5, 2026, with responses due by August 20, 2026, and falls under NAICS code 332510. The contract is administered by the Department of Defense’s Strategic Acquisition Program Directorate, with Theodore Misiolek listed as the primary point of contact, reachable via email and phone provided. The procurement is classified as federal with no set-aside designation specified.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 1 hour ago

DEADLINE

in 15 days
View Details
NAICS: 332510
New
DIBBS
LOCK, RIM
Solicitation # SPE7LX-26-U-9319
The contract pertains to the procurement of 297 units of a LOCK, RIM with NSN 5340-01-652-0224, issued under solicitation SPE7LX-26-U-9319 by the Strategic Acquisition Program Directorate within the Department of Defense. The requirement is subject to the DLA Packaging Requirements for Procurement and incorporates technical and quality specifications identified by R or I numbers from the DLA Master List of Technical and Quality Requirements, which must be accessed online for full compliance. For this solicitation, the applicable version of the master list is determined by the solicitation issuance date. The contract is a total small business set-aside under FAR 19.5, with a NAICS code of 332510, indicating it is targeted toward small businesses in the manufacturing sector. The delivery deadline is set for 116 days after award, and the solicitation was posted on August 5, 2026, with responses due by August 20, 2026. Government identification must be removed from any non-accepted supplies in accordance with the specified requirements. The primary point of contact for inquiries is Theodore Misiolek, reachable via email and phone listed in the contract data.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 1 hour ago

DEADLINE

in 15 days
View Details
NAICS: 332510
New
DIBBS
RIVET, BLIND
Solicitation # SPE4A6-26-T-12TZ
This contract specifies the procurement of 3 hundred-count units of blind rivets under NSN 5320-01-033-8176, with a unit of issue of HD (100), requiring strict compliance with technical and quality standards referenced through the DLA Master List of Technical and Quality Requirements. The item is designated as a critical application component and must conform to non-government standards NAS9304 Rev 7, NAS1686 Rev 5, and Quality Assurance Provision 13873, with inspections performed at origin and acceptance determined there as well. Sampling must adhere to MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required unless otherwise specified, and attributes must be verified at predefined levels corresponding to AQLs of 0.1 for critical, 1.0 for major, and 4.0 for minor characteristics. All packaging and labeling must follow MIL-STD-129 and ASTM D3951, with palletization governed by DLA packaging requirements, and no variance in quantity is permitted. Delivery is due in 165 days FOB origin to Hill Air Force Base, Utah, with a required ship date of January 26, 2027, and original delivery date of March 21, 2027. The contractor must provide a Certificate of Quality Compliance and ensure all materials bear proper physical identification per RQ017, with government identification removed from non-accepted items per RQ011. Packaging and marking must meet all DLA mandates that supersede industry standards, and transportation logistics are governed by DLAD procedural notes C19 and C20. The procurement is managed under solicitation SPE4A6-26-T-12TZ, with primary point of contact Debra Fowler, and the solicitation was issued on August 5, 2026, with responses due by August 13, 2026. The item falls under NAICS code 332510 and is sourced through the Department of Defense’s ASC Commodities Division.
ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
GOVERNMENT FIRST ARTIC
Solicitation # SPE4A6-26-T-12TL
The contract pertains to the procurement of 31 screw thread inserts under NSN 0001S00000052, with a delivery requirement of 541 days after date of award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with applicable revisions controlled by the solicitation issue or award date depending on acquisition size. The item is subject to Cybersecurity Maturity Model Certification Level 2 compliance, DLA packaging standards, and tailored higher-level quality requirements applicable to both manufacturers and non-manufacturers. Inspection and acceptance occur at the origin, and government identification must be removed from non-accepted items. Physical identification of the bare item is required, though Item Unique Identification is waived based on service customer request under DFARS 252.211-7003. Technical data associated with the item is subject to export controls under ITAR or EAR, restricting disclosure to foreign persons regardless of location, and access is limited to contractors with approved JCP certification, completed DOD export control training, and DLA authorization. DFARS 252.225-7048 governs the handling of controlled technical data. The solicitation number is SPE4A6-26-T-12TL, issued on August 5, 2026, with responses due August 13, 2026. Performance is designated for Hill AFB, Utah, under the Department of Defense’s ASC Commodities Division, with Priscilla Holmes as the primary point of contact.
ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

NAICS: 335999
New
DIBBS
Supply of Insulating Cover Blanket (NSN: 1660-01-472-5136)The contract calls for the supply of 306 new and unused insulating cover blankets identified by NSN 1660-01-472-5136, all of which must comply with military specifications to ensure functional integrity and safety. These blankets are critical components intended for operational use where thermal protection and reliability are non-negotiable, and the requirement emphasizes that no used, refurbished, or non-conforming items will be accepted. The solicitation is categorized as a subcontract under NAICS code 335999, indicating it falls within other electrical equipment and component manufacturing, and is managed by the ASC SUPPLIER OPER AE AND AF DIV within the Department of Defense. The opportunity was posted on August 5, 2026, with a firm response deadline of August 11, 2026, leaving a six-day window for qualified suppliers to submit proposals. While the place of performance and point of contact details are unspecified, the transaction is facilitated through the DIBBS system, and vendors must ensure full adherence to military standards and delivery timelines to meet contractual obligations.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 6 days
View Details
NAICS: 332722
New
DIBBS
PLUG, MACHINE THREAD
Solicitation # SPE4A7-26-Q-0974
The contract pertains to the procurement of seven units of a machine thread plug with NSN 5365-00-854-2899, issued under solicitation number SPE4A7-26-Q-0974 by the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV. Delivery is required within 182 days after contract award, and responses must be submitted by August 15, 2026. Technical data associated with this item is subject to strict export controls under either ITAR or EAR, meaning any disclosure to foreign persons—even within the United States—is prohibited without prior authorization from the Department of State or Department of Commerce. DFARS 252.225-7048 governs the handling of this controlled information, and only contractors certified under the US/Canada Joint Certification Program, with completed DLA training and approved access, are permitted to receive the technical data. The primary point of contact for the solicitation is Mykhara Robinson, reachable via email at mykhara.robinson@dla.mil.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 10 days
View Details
NAICS: 336413
New
DIBBS
SKIN, AIRCRAFT
Solicitation # SPE4A7-26-T-617T
The contract pertains to the procurement of one aircraft skin identified by NSN 1560-01-366-4266, with a delivery requirement of 142 days after order. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation or award date depending on acquisition size. The item is subject to stringent documentation and compliance requirements including source approval submission, DLA packaging standards, and cybersecurity maturity model certification level 2 by a certified third-party assessment organization. Configuration changes require formal engineering change proposals for any deviations or waivers. Inspection and acceptance must occur at the manufacturer’s origin, and non-accepted items must have all government identification removed. Components are governed by Qualified Products Lists or Qualified Manufacturers Lists as defined in procurement note H02, and physical marking of the bare item is mandatory. While unique identification is not required per the service customer’s request, export control restrictions apply to associated technical data under ITAR or EAR, requiring prior authorization for any disclosure to foreign persons, including employees of U.S. companies abroad. Distribution of such data is restricted to DLA contractors with approved US/Canada Joint Certification Program status, confirmed training completion, and formal DLA authorization. The contract falls under solicitation SPE4A7-26-T-617T, issued by the Department of Defense through the ASC Supplier Operation AE and AF Division, with performance at Tinker AFB and a response deadline of August 13, 2026.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 333995
New
DIBBS
CYLINDER, INNER SHOC
Solicitation # SPE4A7-26-R-X998
The contract pertains to the procurement of one cylinder, inner shock absorber, boom stowage, identified by NSN 1680-00-672-8041, with a delivery deadline 365 days after award. The solicitation is a total small business set-aside under FAR 19.5, issued by the Department of Defense under agency code SPE4A7-26-R-X998, with a response deadline in August 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. The item is not subject to Item Unique Identification per customer request, in accordance with DFARS 252.211-7003(c)(1)(i). Cyberspace requirements mandate CMMC Level 2 certification for third-party assessors, and physical identification or bare item marking must comply with specified protocols. Packaging must conform to DLA procurement standards, and tailored quality requirements apply to both manufacturers and non-manufacturers. Any configuration changes require formal engineering change proposals. Inspection and acceptance must occur at the manufacturer’s origin, and government identification must be removed from non-accepted items. Export control applies to associated technical data under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons, wherever located; access is restricted to contractors with approved JCP certification, completed DOD export handling training, and DLA authorization. DFARS 252.225-7048 governs this data handling restriction.
Fluid Power Cylinder and Actuator Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 332722
New
DIBBS
BOLT, CLEVIS
Solicitation # SPE4A7-26-T-617Y
The contract is for the procurement of 1,429 units of BOLT, CLEVIS with NSN 5306-00-151-3538 under solicitation SPE4A7-26-T-617Y, issued by the Department of Defense through ASC SUPPLIER OPER AE AND AF DIV. Delivery is required within 170 days of award, with FOB origin terms and inspection and acceptance occurring at the destination facility in New Cumberland, Pennsylvania. The unit of issue is each, with no tolerance for quantity variance. All supplies must comply with the DLA Master List of Technical and Quality Requirements, which take precedence over other standards, and packaging must adhere to ASTM D3951 as well as MIL-STD-129 for marking and labeling. Palletization must meet DLA Packaging Requirements, and government identification must be removed from non-accepted items. Sampling and inspection follow MIL-STD-1916 or a comparable zero-based plan, with verification levels or AQLs assigned based on attribute criticality, and zero non-conformances required unless otherwise specified. Identification markings must conform to MIL-STD-130N in addition to manufacturer-specific data. The required delivery date is March 25, 2027, with a need ship date of January 31, 2027, and the contract references specific DLA transportation procedures for shipping and first destination handling.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
PIVOT BLOCK ASSY, LA
Solicitation # SPE4A7-26-T-618N
The contract is for the procurement of 22 units of a Pivot Block Assembly with NSN 1560-01-165-5479 under solicitation SPE4A7-26-T-618N, issued by the Department of Defense through the ASC Supplier Oper AE and AF Division. Delivery is required within 79 days after award, with the place of performance located in Corpus Christi, Texas, 78419-5255. The solicitation was posted on August 5, 2026, and responses are due by August 13, 2026. This item contains technical data subject to export control under either ITAR or EAR, meaning any disclosure to foreign persons, regardless of location, or to foreign subsidiaries requires prior authorization from the Department of State or Department of Commerce. DFARS 252.225-7048 governs the handling of this controlled information, and only DLA contractors with approved JCP certification, completion of mandatory DOD export control training, and approval from DLA authorities are permitted to access the technical data. The NAICS code is 336413, and all distribution must comply fully with DLA packaging and export control requirements.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
DUCT ASSEMBLY, AIR C
Solicitation # SPE4A7-26-T-618E
This contract pertains to the procurement of a duct assembly for air conditioning-heating systems, identified by part number 4A92040-103A and NSN 1660008833626, with a required quantity of five units. The item is source-controlled and must be manufactured and tested in strict accordance with limited rights data held by Lockheed Martin Corporation and sourced exclusively from Arrowhead Products Corporation, with no alternative suppliers permitted unless an approved source approval request is submitted and granted. Technical and quality requirements are governed entirely by the DLA Master List of Technical and Quality Requirements, with specific protocols for inspection, testing, and documentation, including the use of zero-defect sampling under MIL-STD-1916 or ASQ H1331, and mandatory adherence to verification levels and AQLs for critical, major, and minor attributes. All items must be inspected and accepted at origin, with no tolerance for quantity variance, and must be packaged in compliance with ASTM D3951 and MIL-STD-129, as superseded by DLA packaging standards, with palletization following RP001 guidelines. The item is designated as a critical application and requires physical identification and labeling per RQ017. Cybersecurity compliance is mandated at CMMC Level 2 via self-assessment. The delivery is FOB origin with a 473-day lead time, and the required delivery date is January 12, 2028, with a need ship date of November 30, 2027. The contract designates Robins Air Force Base, Georgia as the sole delivery point, and unit price is set at $5.00 per unit. Government identification must be removed from non-accepted supplies, and item unique identification is waived per customer request.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 336414
New
DIBBS
FAIRING, LAUNCHER, GUIDED MISSILE AIRCRAFT
Solicitation # SPE4A7-26-R-X989
The contract pertains to the procurement of a fairing, launcher, and guided missile aircraft configuration controlled under Lockheed Martin Corporation’s drawing number 16S307, Revision K, with part number 16S307-1, sourced from Alek Industries Inc and Lockheed Martin Corporation. The item is identified by NSN 1440-01-073-2293, with a quantity of one unit, and requires delivery within 230 days after delivery order. Technical and quality requirements referenced in the contract are drawn from the DLA Master List of Technical and Quality Requirements, with applicable revisions governed by the solicitation or award date depending on acquisition size. The item is subject to export controls under ITAR or EAR, prohibiting unauthorized disclosure of technical data to foreign persons regardless of location and requiring compliance with DFARS 252.225-7048. Access to export-controlled data is restricted to DLA contractors with approved JCP certification, completed training on handling DOD export-controlled data, and explicit approval from the DLA controlling authority. Cybersecurity requirements mandate CMMC Level 2 certification for third-party assessors, and physical identification of the item must adhere to bare item marking standards. Configuration changes require formal engineering change proposals, and government identification must be removed from non-accepted supplies. Packaging must conform to DLA procurement requirements. The solicitation, numbered SPE4A7-26-R-X989, was posted on August 5, 2026, with a response deadline of August 13, 2026, and is a total small business set-aside under FAR 19.5. The contracting office is under the Department of Defense, specifically the ASC Supplier Oper AE and AF DIV, with Lamar Olivier designated as the primary point of contact.
Guided Missile and Space Vehicle Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
New
DIBBS
PLATE, TEMPETURE IND
Solicitation # SPE4A7-26-R-XA01
The contract is for a single unit of a temperature indicator plate, identified by NSN 1650-01-034-8563 and part number 240-180F, supplied by Palmer Wahl Instruments Inc. under a firm fixed price arrangement with no tolerance for quantity variance. Delivery is required within 75 days after award, with both inspection and acceptance occurring at the origin. The item is classified as a critical application item and must comply with all DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951. Packaging must adhere to MIL-STD-129 and RP001 DLA packaging guidelines, with palletization following specified procurement standards. Sampling for quality verification follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise dictated, and attributes are assigned verification levels or AQLs based on criticality. The supplier must implement configuration change management, ensure physical identification per RQ017, maintain measuring equipment calibration under RT001, and submit documentation for source approval per RC001. Cybersecurity compliance requires a CMMC Level 2 self-assessment, and covered defense information controls apply per RD002. The contract is a total small business set-aside, with the prime point of contact at the Department of Defense’s ASC Supplier Operations division.

POSTED

about 1 hour ago

DEADLINE

in 7 days
View Details
NAICS: 332618
New
DIBBS
PIN, QUICK RELEASE
Solicitation # SPE4A7-26-T-618L
The contract pertains to the procurement of 3,250 units of a quick release pin identified by NSN 5315-01-525-4843 and part number QRD3B1025Z, classified as a commercial item. Delivery is required within 113 days of award, with FOB origin terms and inspection and acceptance occurring at the destination. All units must comply with stringent technical and quality requirements mandated by the DLA Master List of Technical and Quality Requirements, which take precedence over any other standards including ASTM D3951, though packaging must conform to ASTM D3951 and be marked and labeled per MIL-STD-129. Packaging and palletization must adhere to DLA’s RP001 requirements, and the unit of issue is each (EA) with zero tolerance for quantity variance. Sampling and inspection follow MIL-STD-1916 or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. The item is designated as a critical application item and must bear physical identification per RQ017. Documentation for source approval, compliance with DLA packaging, and removal of government identification from non-accepted supplies are mandatory. The delivery address is DLA Distribution Albany, and the original required delivery date is December 16, 2026, with a needed ship date of July 23, 2026. The contract is issued under solicitation SPE4A7-26-T-618L with a total price of $3,250.00, and all terms are governed by the DLA framework for simplified acquisition.
Other Fabricated Wire Product Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SPACER, PLATE
Solicitation # SPE4A7-26-T-618A
The contract outlines the procurement of a SPACER, PLATE with part number 5365-01-417-8551 and quantity of 134 units, delivered FOB origin under solicitation SPE4A7-26-T-618A, with a required delivery date of November 29, 2026, and a lead time of 107 days. The item is designated as a critical application item and must comply with technical and quality requirements from the DLA Master List, including tailored higher-level quality provisions, inspection and acceptance at origin, and specific marking and packaging standards per MIL-STD-129 and MIL-STD-2073-1E. Sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and critical, major, and minor attributes are assigned verification levels VII, IV, and II respectively. The material is classified as specialty metal, triggering compliance with DFARS 252.225-7008, 7009, and 7010. The product must adhere to Technical Data Package Revision A Generation 2 referenced against baseline drawing 19207 12365475-1, and all packaging and palletization must meet DLA’s procurement requirements. Unit of issue is each, priced at $134.00 per unit, with no variance allowed in quantity. Inspection and acceptance occur at origin, and government identification must be removed from non-accepted supplies. The item must be marked according to MIL-STD-129 with no special marking codes applied, and shipped to the DLA Distribution facility in New Cumberland, Pennsylvania. The contracting office is the ASC Supplier Oper AE and AF Division under the Department of Defense, with primary point of contact Lexus Henry. The NSN and part number are strictly controlled, and all documentation must align with the DLA’s authorized unit of issue system and transportation guidelines specified in DLAD Proc Notes C19 and C20.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details