Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

SPACER, PLATE

Active
SPE4A7-26-T-615CFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of a SPACER, PLATE with part number 165-7067132-58 and NSN 5365-01-593-7528, for a quantity of 85 units, under solicitation SPE4A7-26-T-615C. Delivery is required within 171 days after award, with inspection and acceptance occurring at the supplier's origin. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with applicable revisions controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. Sampling must comply with MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based sampling plan, with verification levels designated as VII, IV, and II for critical, major, and minor attributes respectively, and AQLs of 0.1, 1.0, and 4.0; unspecified attributes are treated as major. Zero non-conformances are required in sample lots unless otherwise stated, and manufacturers may choose between attribute or variable inspection under MIL-STD-1916. The item must not contain mercury or mercury-containing compounds, except for specific functional applications such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or NAVSEA-specified chemical reagents, with portable fluorescent lamps and instruments requiring shock-proof design and secondary containment as per NAVSEA 5100-003D. Physical identification of the bare item must be marked per RQ017, and non-accepted supplies must have government identification removed. Technical data associated with this item is subject to export controls under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons, whether in the U.S. or abroad, including foreign subsidiaries and employees; DFARS 252.225-7048 applies. Access to export-controlled data is restricted to contractors with approved US/Canada JCP certification, completed DOD export control training, and DLA approval. The solicitation was posted on August 4, 2026, with a response deadline of August 12, 2026, and the point of contact is Jessica Gentry of the Department of Defense.

General Info

Procure 85 SPACER PLATEs, NSN 5365-01-593-7528, deliver in 171 days, zero defects, ITAR-controlled, no mercury, MIL-STD-1916 sampling.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

332999 - All Other Miscellaneous Fabricated Metal Product ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

SPE4A7-26-T-615C.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV
View Agency Profile
Office AddressUS
Contacts
JESSICA GENTRY
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SPACER,PLATE
SPACER,PLATE
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
PART NUMBER: 165-7067132-58
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations
SPE4A7-26-T-615C
SECTION B
(ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 5365-01-593-7528 Quantity: 85 EA Purchase Request: 7017741682QTY: 85 Delivery: 171 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332999
New
DIBBS
SHIM
Solicitation # SPE4A5-26-T-323P
The contract pertains to the procurement of five units of a specific shim identified by NSN 5365-01-493-6230 and part number 212-011-731-101, supplied by BELL TEXTRON INC with CAGE code 97499. Delivery is required FOB origin within 171 days of contract award, with no tolerance for quantity variance. Inspection and acceptance both occur at the destination facility. Packaging must comply with MIL-STD-2073-1E, including specified preservation methods, materials, and unit containers, while marking adheres strictly to MIL-STD-129 and DLA packaging requirements, with no special marking codes applied. Unit identification is not required per customer request under DFARS 252.211-7003(c)(1)(i). Acceptable sampling follows Sikorsky Corporation’s Alternate Sampling Plan QAP 1201, which must meet or exceed ASQ H1331 or MIL-STD-1916 standards. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, with the same address used for freight shipping. The required ship date is January 31, 2027, with an original delivery requirement of October 15, 2027. Technical and quality requirements referenced are governed by the DLA Master List, with applicable revisions determined by the solicitation or award date depending on acquisition scale. The contract is issued under solicitation SPE4A5-26-T-323P, with a unit price of $5.00 per piece for a total value of $25.00.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332999
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE7M0-26-T-029R
The contract is for the procurement of a cable assembly identified by NSN 1290017009290, with a quantity of two units to be delivered to W0ML USA DEP TOBYHANNA within five days of award. The approved source for this item is listed as 1EG52 with part number 150-020654-P001. The solicitation is issued as an RFQ under number SPE7M026T029R and is exclusively available electronically through the provided SAM.gov link; no hard copies are provided, and no specifications, plans, or drawings are available for reference. Only responsible sources may submit quotes, and all timely electronic submissions will be considered. This procurement is set aside entirely for small businesses as defined by the SBA, with the NAICS code 332999 indicating it falls under Other Miscellaneous Manufacturing. The contracting office is the DLA Land and Maritime based in Columbus, Ohio, and all questions must be directed via email to the designated buyer listed in the solicitation. Quotes are due by August 17, 2026, and must be submitted electronically through the appropriate government portal.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 2 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332999
New
DIBBS
BAR, LOCKING
Solicitation # SPE7L4-26-T-5969
The contract pertains to the procurement of a single unit of a BAR, LOCKING component identified by NSN 1005-01-188-7858 under solicitation SPE7L4-26-T-5969, with a delivery requirement of five days after award. The item is subject to stringent DLA packaging, technical, and quality requirements as defined in the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date. The component is classified under Category I Munitions List items, triggering strict demilitarization protocols for disposal, and is subject to export control under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons regardless of location. Only contractors with approved US/Canada Joint Certification Program status, completed DLA export control training, and formal authorization may access accompanying technical data. The contract mandates adherence to configuration change management, qualified products or manufacturers lists where applicable, inspection and acceptance at origin, and removal of government identification from non-accepted items. Measuring and test equipment must comply with specified standards, and all parties must follow DFARS 252.225-7048 for export-controlled technical data handling. The procurement is managed by the Department of Defense’s LSO Combat Vehicles and Armament office, with Paula Chapman as the point of contact, and responses are due by August 17, 2026.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 2 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332999
New
DIBBS
SWAGING SLEEVE, WIRE RO
Solicitation # SPE4A5-26-T-323R
The contract specifies the procurement of 164 swaging sleeves for wire rope, identified by NSN 4030-01-417-5140 and part number MS51844-81, manufactured in accordance with specification NR MS51844E. This item is classified as a commercial item and subject to stringent quality and packaging standards including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with no special marking required. The product is designated as a critical application item requiring physical identification and adherence to tailored higher-level contract quality requirements. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances permitted unless otherwise specified, and critical attributes are verified at Level VII with an AQL of 0.1. Delivery is FOB origin with a required delivery window of 171 days, with no variance allowed in quantity. The delivery destination is DLA Distribution Cherry Point in North Carolina, and the item must be ready for shipment by January 31, 2027, to meet the original required delivery date of March 29, 2027. The contract is governed by DLA packaging and quality requirements, incorporating technical specifications from the DLA Master List, with acceptance performed at the destination point. The solicitation was issued under SPE4A5-26-T-323R with a response deadline of August 12, 2026, and is managed by the Department of Defense’s ASC Supplier OEM Division.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332999
New
DIBBS
SHIM
Solicitation # SPE4A7-26-T-612X
This contract involves the procurement of 384 units of a shim identified by NSN 5365-01-570-5245 under solicitation SPE4A7-26-T-612X, with a delivery requirement of 171 days after award. The solicitation is issued by the Defense Logistics Agency through its ASC Supplier Oper AE and AF Division, and responses are due by August 12, 2026. The item is subject to stringent cybersecurity requirements, mandating CMMC Level 2 certification for the offering organization as a certified third-party assessment organization. Technical and quality requirements referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with compliance based on the revision in effect at the time of solicitation issuance. The contract incorporates export control provisions under ITAR or EAR, restricting the disclosure or transfer of associated technical data to foreign persons without prior authorization from the Department of State or Department of Commerce. Access to this controlled data is limited to contractors with approved US/Canada Joint Certification Program status, completed DOD export control training, and DLA authorization. Additional requirements include adherence to DLA packaging standards, inspection and acceptance at origin, removal of government markings from non-accepted items, physical identification of bare parts, and compliance with DFARS 252.225-7048 for export-controlled information. The place of performance is specified as Tracy, California, with Jamiah Sutton as the primary point of contact for inquiries.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332999
New
DIBBS
PANEL, VEHICULAR OPE
Solicitation # SPE7L1-26-T-912E
The contract pertains to the procurement of one unit of a vehicular panel identified by NSN 2510016627142 and part number 4310155, issued under solicitation SPE7L1-26-T-912E by the Department of Defense through the Land Supply Chain organization. Delivery is required within five days of contract award, with FOB origin terms and no tolerance for quantity variance. Inspection and acceptance occur at the destination, and the item must be packaged in compliance with ASTM D3951, with precedence given to applicable DLA Master List of Technical and Quality Requirements, including mandatory labeling per MIL-STD-129. Packaging and palletization must adhere to DLA Packaging Requirements for Procurement, ensuring the Unit of Issue is one each and Quantity per Unit Pack is correctly specified. The item is to be shipped to the Distribution Management Office at MCLB Albany, Georgia, via the fastest traceable means, explicitly excluding parcel post. The shipment reference includes RDD 999, project code 657 TP 1, and a government-only tracking identifier. The required delivery date is August 3, 2026, and the contract’s technical specifications, including those identified by R or I numbers, are incorporated by reference from the DLA Master List accessible via the official DLA website. The contracting officer, Kristina Derry, can be contacted for inquiries, and all compliance obligations, including unit of issue alignment with ANSI X12 standards, must be met to ensure acceptance and payment.
LAND SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332999
New
DIBBS
CLAMP, WIRE ROPE, SADDLE
Solicitation # SPE4A5-26-T-320X
The solicitation seeks 13,566 wire rope saddle clamps under NSN 4030002434440 for delivery to DLA Distribution Red River with a delivery timeline of 171 days after award. The procurement is conducted as a combined solicitation solely restricted to small businesses under a total small business set aside, classified under NAICS code 332999 for other fabricated metal product manufacturing. The contracting agency is DLA Aviation under the Department of Defense, with the office located in Richmond, Virginia. All qualified and responsible vendors must submit electronic quotes through the designated platform, as hard copies are not available and no paper submissions will be accepted. Digitized technical drawings and military specifications can be accessed electronically via the solicitation link. The RFQ was posted on August 4, 2026, with a response deadline of August 12, 2026. Questions must be directed via email to the designated buyer, with additional guidance available through the DIBBS portal using solicitation number SPE4A5526T320X.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332999
New
DIBBS
HOSE ASSEMBLY, NONME
Solicitation # SPE7M4-26-T-300C
The contract pertains to a nonmetallic hose assembly with part number 74D461053-1005 and NSN 4720-01-279-8980, issued under solicitation SPE7M4-26-T-300C as a total small business set-aside. A single unit is required to be delivered within 20 days of award, with delivery terms FOB origin and inspection and acceptance also occurring at the manufacturer’s facility. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, which supersede any conflicting specification provisions. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute chemicals must be approved unless explicitly authorized by the specification. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization following DLA’s packaging requirements, while unit level identification is not required per customer request. Sampling for quality assurance follows MIL-STD-1916 or ASQ H1331 with zero nonconformances required unless otherwise specified, and attributes are classified with verification levels or AQLs as defined in the contract. The item must be shipped by the fastest traceable means, excluding parcel post, to the specified delivery address in Belle Chasse, Louisiana. The contract specifies a required delivery date of July 31, 2026, and references detailed logistics, billing, and agency data for government use only, with Blake Tushar designated as the primary point of contact.
FLUID HANDLING DIVISION

POSTED

about 2 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332999
New
DIBBS
RING, LOCK, SERRATED
Solicitation # SPE4A7-26-T-614Y
The contract specifies the procurement of three serrated lock rings with NSN 5365-01-592-3046 under solicitation SPE4A7-26-T-614Y, with a delivery deadline 171 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions tied to the solicitation or award date depending on acquisition size. Packaging must comply with DLA standards, and all supplies must be free of intentional mercury or mercury-containing compounds except for specific exempted uses such as functional batteries, fluorescent lights, sensors, weapon systems, and approved chemical reagents; portable devices containing mercury must be shockproof and feature a secondary containment layer in accordance with NAVSEA 5100-003D. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attributes are assigned verification levels or AQLs based on criticality. The item is subject to export controls under ITAR or EAR, requiring prior government authorization for any export or disclosure to foreign persons, and access is restricted to contractors with JCP certification, completed training, and DLA approval. Cybersecurity compliance requires CMMC Level 2 certification through a certified third-party assessment organization. Technical data is protected under DFARS 252.225-7048, and physical marking of items must meet DLA identification standards. The solicitation was posted on August 4, 2026, with responses due by August 12, 2026, and performance is to be delivered to New Cumberland, Pennsylvania, under oversight from the Department of Defense’s ASC Supplier Operations AE and AF Division.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332999
New
DIBBS
HOSE ASSEMBLY, METAL
Solicitation # SPE7M4-26-T-299Q
This contract specifies the procurement of one metal hose assembly with NSN 4720-01-286-0229 and part number 4501SP-34735 from HYSPAN PRECISION PRODUCTS, INC., under solicitation SPE7M4-26-T-299Q. Delivery is required within 20 days to a destination address at FPO AE 09577, with the shipment to be delivered FOB destination and inspected and accepted at the same location. The quantity is fixed at one unit with zero variance allowed. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, using specified methods including vacuum sealing, protective wrapping, and Unit Container E8, while palletization follows DLA packaging requirements. No mercury or mercury-containing compounds may be intentionally added or come into direct contact with the hardware except for approved exceptions such as batteries, fluorescent lamps, sensors, or instruments as defined by NAVSEA, with portable devices requiring shockproof construction and a second containment barrier per NAVSEA 5100-003D. The contract prohibits parcel post shipping and mandates the use of the fastest traceable means, with freight directed to the USNS LARAMIE. Special marking is not required, and all documentation references DLA’s Master List of Technical and Quality Requirements for applicable R and I numbers. The original required delivery date is July 31, 2026, and the solicitation was posted on August 4, 2026, with responses due by August 17, 2026. The contracting office is the Fluid Handling Division of the Department of Defense, with Blake Tushar as the primary point of contact.
FLUID HANDLING DIVISION

POSTED

about 2 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332999
New
DIBBS
HOSE, AIR DUCT
Solicitation # SPE7M4-26-T-299X
The contract specifies the procurement of a single air duct hose with an inner diameter of 2-1/2 inches and an overall length of 12-1/2 inches, identified by NSN 4720-01-047-5595 and part number BACD40A10-40-5A11, for use on Boeing aircraft models 2E3A, 6E3A, 7E3A, and 9E3A. Delivery is required within 20 days FOB origin, with the item to be shipped to Tinker Air Force Base in Oklahoma via traceable means, explicitly prohibiting parcel post. The quality and technical requirements are governed by the DLA Master List of Technical and Quality Requirements, which takes precedence over all other standards including ASTM D3951, and packaging must comply with MIL-STD-129 and RP001 DLA Packaging Requirements. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331 Table 1 with a zero-nonconformance acceptance criterion unless otherwise specified, with attributes assigned verification levels or AQLs in alignment with defined criticality. Inspection and acceptance occur at the destination, with no variance allowed in quantity, and all packaging must be properly marked and palletized. The contract is issued under solicitation SPE7M4-26-T-299X with a response deadline in August 2026 and an original required delivery date of July 30, 2026.
FLUID HANDLING DIVISION

POSTED

about 2 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332999
New
DIBBS
FRAME, STRUCTURAL, VEHIC
Solicitation # SPE7L1-26-T-914D
This contract is for the procurement of two units of a frame, structural, vehicular component identified by NSN 2510-01-668-9667 and part number 1330-1761 from MCT Industries, Inc., with a total value of $4.00. Delivery is required within five days of award, FOB origin, with no tolerance for quantity variance. Inspection and acceptance occur at the destination, and all items must comply with MIL-STD-2073-1E packaging standards and MIL-STD-129 marking requirements. The item is designated as a commercial item, and government identification must be removed from non-accepted supplies. Ozone-depleting chemicals are strictly prohibited, and any substitute chemicals require prior approval unless explicitly authorized by specifications. The contract incorporates technical and quality requirements referenced in the DLA Master List, with revisions controlled based on acquisition size and amendment dates. Compliance with MIL-STD-130N for identification marking of U.S. military property is required, and all shipments must adhere to DLA packaging guidelines. The destination is RAF Lakenheath, Building 1035, Suffolk, United Kingdom, with shipment details referencing DLAD PROC NOTE C19 and C20 for transportation and freight. The contract is issued under solicitation SPE7L1-26-T-914D, with a required delivery date of August 4, 2026, and a response deadline of August 17, 2026.
LAND SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 13 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

NAICS: 332510
New
DIBBS
RIVET, BLIND
Solicitation # SPE4A7-26-T-611K
The contract specifies the procurement of 62 boxes of blind rivets with NSN/Part Number 5320-01-330-2847 under solicitation SPE4A7-26-T-611K, with a response deadline of August 12, 2026, and a delivery requirement within 171 days after award. The item is designated as a critical item requiring origin inspection, and all supplies must comply with detailed technical and quality requirements indexed by R or I numbers referenced in the DLA Master List of Technical and Quality Requirements. Packaging must adhere to DLA standards, and documentation for source approval is mandatory. Government identification must be removed from non-accepted supplies, and inspection and acceptance will occur at the origin. Covered defense information is potentially applicable, and tailored higher-level quality requirements govern both manufacturers and non-manufacturers. The place of performance is New Cumberland, Pennsylvania, with Brad Ingram of the Department of Defense, ASC Supplier Operations AE and AF Division, serving as the primary point of contact.
Hardware Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
DRUM ASSEMBLY, WINCH
Solicitation # SPE4A7-26-T-615R
The contract is for the procurement of seven drum assemblies for winches with part number 9-14986 and NSN 1680-00-229-9128, under solicitation SPE4A7-26-T-615R. Delivery is required within 171 days of award, with performance to occur at Tinker AFB, Oklahoma. The solicitation, issued by the Department of Defense’s ASC Supplier Oper AE and AF Division, closed for responses on August 12, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. The item is subject to stringent configuration management, inspection at origin, and export control regulations under ITAR or EAR, restricting technical data access to contractors with approved JCP certification, completed DOD export training, and formal DLA authorization. Packaging must adhere to DLA standards, and non-accepted supplies must have all government identification removed. Physical marking of bare items and controlled handling of technical data are mandatory per DFARS 252.225-7048. All data sharing involving foreign persons, including U.S. subsidiaries and foreign nationals within the United States, is prohibited without prior government authorization.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334511
New
DIBBS
KEYBOARD, DATA ENTRY
Solicitation # SPE4A7-26-T-615E
The contract is for the procurement of 13 keyboard, data entry units with NSN/Part Number 5895-01-587-7441, classified as a commercial off the shelf item. The solicitation number is SPE4A7-26-T-615E, issued by the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV, with a response deadline of August 12, 2026, and a required delivery date 171 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible via the provided website, with the revision in effect on the solicitation issue date or award date controlling based on acquisition size and any applicable amendments. Government identification must be removed from non-accepted supplies as per RQ011. The place of performance is designated as San Diego, CA, with Michael Johnson serving as the primary point of contact via email and phone. The NAICS code is 334511, and the procurement falls under federal acquisition guidelines without a specified set-aside type.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
BUSHING, MACHINE THREAD
Solicitation # SPE4A7-26-T-610X
The U.S. Department of Defense, through the Defense Logistics Agency Aviation, is seeking quotes for 1,854 machine thread bushings identified by NSN 5365012707546, to be delivered to DLA Distribution Red River within 128 days of award. This procurement is conducted under solicitation SPE4A726T610X, which is exclusively available electronically via the SAM.gov platform, with no hard copies provided. Digitized drawings and military specifications may be accessed online. The solicitation is set aside for SBA-certified Women-Owned Small Businesses under the WOSB Program, and only responsible sources meeting this eligibility criterion may submit responses. All quotes must be submitted electronically through the designated portal prior to the deadline of August 12, 2026. Questions concerning the solicitation should be directed to the designated point of contact via email, as specified in the official document accessible through the provided UI link or the DIBBS website using the solicitation number.
Hardware Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332119
New
DIBBS
SHIM
Solicitation # SPE4A7-26-T-613C
The contract pertains to the procurement of a SHIM part identified by NSN 5365-01-725-5627 and part number 56767-1, manufactured in compliance with Basic Drawing NR 70210 56767 Revision D dated 11/07/1955. A total of 21 units are to be delivered FOB origin with zero variance allowed in quantity, and delivery must be completed within 171 days from the contract award, with an original required delivery date of January 7, 2027, and a need ship date of January 31, 2027. Inspection and acceptance occur at the origin, and packaging must conform to MIL-STD-2073-1E with designated preservation methods, materials, and unit packaging details, while marking follows MIL-STD-129 with no special marking required. Palletization adheres to DLA packaging requirements, and the delivery destination is the DLA Distribution Depot in Tinker AFB, Oklahoma. Sampling and quality verification follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attributes are assigned verification levels or AQLs as defined by the drawing or specification. The supplier must comply with DLA’s Master List of Technical and Quality Requirements identified by R or I numbers, including specific provisions for removal of government identification, physical marking of bare items, and documentation for source approval requests. Cybersecurity requirements mandate a CMMC Level 2 Self-Assessment, and covered defense information is subject to RD002 controls. Documentation for source approval must meet RC001 standards, and all units must be shipped in accordance with DLA transport and freight procedures. The solicitation was issued on August 4, 2026, with a response deadline of August 12, 2026, under contract number SPE4A7-26-T-613C, and the primary point of contact is Jessica Gentry.
Metal Crown, Closure, and Other Metal Stamping (except Automotive)

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
PISTON, HYDRAULIC AC
Solicitation # SPE4A7-26-T-612C
The contract specifies the procurement of two hydraulic pistons for air conditioning systems under NSN 1650-01-517-7844 and part number 11463841 from RANDOLPH & BALDWIN, INC. Delivery is required FOB origin within 171 days, with no variance allowed in quantity, and inspection and acceptance are to occur at the manufacturer’s location. All items must comply with DLA’s Master List of Technical and Quality Requirements, which supersede all other standards including ASTM D3951, and packaging must follow MIL-STD-129 and RP001 guidelines. Sampling and inspection adhere to MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and critical, major, and minor attributes are assigned verification levels VII, IV, and II respectively. Quality management systems must meet ISO 9001:2015, and measuring equipment must meet RT001 standards. Physical identification and bare item marking are mandatory per RQ017. The contract references revision B of drawing NR 18876 dated 08/13/1997 and revision D dated 07/02/1985, with a newer revision dated 03/14/2024 governing the current requirement. The item must be delivered to the DLA Distribution facility in New Cumberland, PA, with the original required delivery date set for January 27, 2027, and an anticipated ship date of January 31, 2027. The contract was solicited under SPE4A7-26-T-612C, classified under NAICS 336413, with Jamiah Sutton as the primary point of contact.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
VIBRATION ISOLATOR,
Solicitation # SPE4A7-26-T-612K
The contract pertains to the procurement of 605 units of a vibration isolator, identified by NSN 1680-01-552-5433 and part number 51037 from TECH PRODUCTS CORP, under solicitation SPE4A7-26-T-612K. Delivery is required within 67 days of order placement, with FOB origin terms and inspection and acceptance occurring at the destination. The quantity is fixed with no tolerance for variance, and packaging must comply with ASTM D3951 while adhering strictly to MIL-STD-129 for marking and labeling, with palletization governed by DLA’s RP001 packaging requirements. The DLA Master List of Technical and Quality Requirements supersedes any conflicting standards. Sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and attributes are classified with verification levels VII, IV, and II for critical, major, and minor characteristics respectively. The item is designated as a critical application component and must be physically marked per RQ017. Cybersecurity compliance mandates a CMMC Level 2 self-assessment, and government identification must be removed from non-accepted supplies. The delivery address is DLA Distribution Jacksonville, and transportation guidelines reference DLAD Proc Notes C19 and C20. The original delivery requirement is set for December 12, 2026, with a needed ship date of July 15, 2026. The contract falls under NAICS code 336413 and is managed by the Department of Defense’s ASC Supplier Oper AE and AF Division.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
SAFETY CABLE KIT
Solicitation # SPE4A7-26-T-614C
The Safety Cable Kit is procured under NSN 5342-01-625-3947 with a total quantity of 16 packaging groups, where each packaging group contains 50 individual kits, resulting in 800 total kits. Each kit consists of a cable and a magazine, and each magazine is preloaded with 50 ferrules compliant with specification AS3510-0312K. The unit of issue was changed to packaging group (PG) on April 1, 2022, and all items must adhere to DLA packaging requirements for procurement. Physical identification and bare item marking are mandated, and all technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero nonconformances allowed unless otherwise stated, and attributes are to be classified with verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Inspection and acceptance occur at the manufacturer’s origin, and the item is procured competitively under a military specification. The contract solicitation number is SPE4A7-26-T-614C, with a response deadline of August 12, 2026, a posting date of August 4, 2026, and a delivery requirement 171 days after award. The point of contact is Jamiah Sutton of the Department of Defense’s ASC Supplier Oper AE and AF Division, and the place of performance is New Cumberland, Pennsylvania, with NAICS code 332510 applicable.
Hardware Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336412
New
DIBBS
CORE ASSY BOND, SPEC
Solicitation # SPE4A7-26-T-612N
The contract seeks the procurement of 20 units of CORE ASSY BOND,SPEC with NSN 2995015940126, to be delivered to W1A8 DLA DISTRIBUTION within 171 days after award. Only two approved sources are listed for this item, identified by the part numbers LM-200-158 under vendors 76005 and 98897. The solicitation is issued as an RFQ through SAM. gov under number SPE4A7726T612N and is strictly electronic; no hard copies are available, and no specifications, plans, or drawings are provided. All responsible suppliers may submit quotes, provided they are received electronically by the deadline of August 12, 2026. The opportunity is open without set-aside restrictions, and responses must be submitted via the online portal. The contracting office is the DLA Aviation based in Richmond, Virginia, with inquiries to be directed to the designated point of contact via email. The NAICS code 336412 indicates this procurement relates to aerospace product and parts manufacturing.
Aircraft Engine and Engine Parts Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
SHIM
Solicitation # SPE4A7-26-T-612E
The contract pertains to the procurement of SHIM with NSN 5365-01-472-5933, totaling 117 units, under solicitation number SPE4A7-26-T-612E, which was posted on August 4, 2026, with responses due by August 12, 2026. The item is subject to strict export control regulations under either ITAR or EAR, meaning any disclosure of associated technical data to foreign persons, regardless of location, requires prior authorization from the U.S. Department of State or Department of Commerce. Foreign nationals employed by U.S. companies or subsidiaries are equally restricted, and compliance with DFARS 252.225-7048 is mandatory. Distribution is limited to DLA contractors who hold valid US/Canada Joint Certification Program certification, have completed mandatory DOD training on handling export-controlled data, and have successfully submitted the DLA Export-Controlled Technical Data Questionnaire, all while receiving formal approval from the DLA controlling authority. The place of performance is specified as New Cumberland, Pennsylvania, with a delivery timeline of 171 days after contract award. The contracting office is under the Department of Defense, specifically the ASC SUPPLIER OPER AE AND AF DIV, with primary point of contact Brandon Smith reachable via email and phone provided.
Hardware Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
SHACKLE
Solicitation # SPE4A7-26-T-614L
This contract, identified by solicitation number SPE4A7-26-T-614L, is for the procurement of 99 units of a shackle with NSN 4030-01-657-5940 and part number 10823-17279 from Fastenal Company Div Oshk, CAGE code 3SPK0. The item must be delivered FOB origin with no variance in quantity and is subject to destination inspection and acceptance. The required delivery date is December 4, 2026, with an allowable delivery window of 171 days, and the shipment must be prepared by January 31, 2027. Packaging and labeling must comply strictly with MIL-STD-129 and ASTM D3951, with packaging requirements subordinate to the DLA Master List of Technical and Quality Requirements. Palletization must adhere to DLA Packaging Requirements for Procurement (RP001). All technical and quality specifications referenced by R or I numbers are governed by the DLA Master List in effect on the solicitation issue date, and sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances unless otherwise stated. Attributes are to be classified as critical, major, or minor with corresponding verification levels or AQLs, and unspecified attributes are deemed major. The unit of issue is each (EA), priced at $99.00, for a total value of $9,801. The delivery destination is DLA Distribution Barstow, Central Receiving Warehouse 7, with specific contact details provided. Transportation and shipping instructions must follow DLAD Proc Notes C19 and C20. The contract includes mandatory physical marking of the item as specified under RQ017 and requires removal of government identification from non-accepted supplies as per RQ011.
Hardware Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 331491
New
DIBBS
GOVERNMENT FIRST ARTIC
Solicitation # SPE4A7-26-T-614K
The contract pertains to the procurement of a single unit of DUCT ASSEMBLY,AIR C with NSN/Part Number 0001S00000052, under solicitation SPE4A7-26-T-614K, with a delivery requirement of 260 days after award. The item is subject to strict export control regulations under either ITAR or EAR, meaning any technical data associated with it cannot be disclosed or transferred to foreign persons, including foreign nationals within the United States, without prior authorization from the Department of State or Department of Commerce. DFARS 252.225-7048 governs the handling of this controlled data, and only DLA contractors with approved US/Canada Joint Certification Program certification, completed training on proper handling of DOD export-controlled technical data, and approved access via the DLA questionnaire are permitted to receive or work with this information. The procurement is managed by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, with performance scheduled for Key West, Florida, 33040-9059, and the primary point of contact is Georgina Vass at georgina.vass@dla.mil. The solicitation was posted on August 4, 2026, with responses due by August 12, 2026, under a federal contracting mechanism with NAICS code 331491.
Nonferrous Metal (except Copper and Aluminum) Rolling, Drawing, and Extruding

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details