Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

SPACER, PLATE

Active
SPE4A6-26-T-07SNFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The item specified is a spacer plate with NSN 5365-01-696-8438, requiring one unit to be delivered within 20 days after order. This procurement is governed by strict technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. The technical data associated with this item is subject to export controls under either ITAR or EAR, prohibiting any disclosure or transfer to foreign persons, including foreign nationals within the U.S., without prior authorization from the Department of State or Department of Commerce. Contractors must be certified under the US/Canada Joint Certification Program, have completed mandatory DOD export control training and the DLA questionnaire, and receive explicit approval from DLA to handle the controlled data, with DFARS 252.225-7048 fully applicable. Packaging must comply with DLA requirements, and any non-accepted supplies must have government identification removed. The solicitation, issued by the ASC Commodities Division under the Department of Defense, has a response deadline of July 27, 2026, and the place of performance is designated as Mechanicsburg, PA, 17050-2411. Point of contact is Emma Garrett, reachable via email and phone provided.

General Info

One spacer plate, NSN 5365-01-696-8438, due in 20 days, subject to ITAR/EAR controls and DLA certification.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332119 - Metal Crown, Closure, and Other Metal Stamping (except Automotive)View NAICS

Place of Performance

PR: 7017219094 PRLI: 0001 CONT’D, MECHANICSBURG, PA, 17050-2411, US

Set-Aside

NONE

Documents

(1)

RFQ SPE4A6-26-T-07SN Request for Quotations DLA Aviation

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
Emma Garrett
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SPACER,PLATE
SPACER,PLATE
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD002, COVERED DEFENSE INFORMATION APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 5365-01-696-8438 Quantity: 1 EA Purchase Request: 7017219094QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332119
New
DIBBS
Fabrication and Supply of Sleeve BushingsThe contract seeks the manufacture and delivery of 100 precision sleeve bushings to meet stringent military quality and packaging requirements, ensuring full compliance with defense sector standards. The work is classified as a subcontract under NAICS code 332119, and the place of performance is designated as New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation was posted on July 19, 2026, and responses are due by July 27, 2026, leaving a limited window for interested parties to submit proposals. The contracting entity is the ASC Supplier Oper AE and AF Division under the Department of Defense, indicating the critical nature of the components for defense systems. All delivered items must adhere to strict military specifications for dimensional accuracy, material integrity, and packaging to withstand transport and storage in operational environments.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 332119
New
DIBBS
Precision Sleeve Bushing SupplyThe contract seeks the manufacture and delivery of one precision sleeve bushing per military drawing NR 53711 8840300, Revision H, with full compliance to Defense Logistics Agency requirements, applicable Military Standards, and hazardous materials regulations. The component must meet exacting technical specifications outlined in the drawing and adhere to all quality, safety, and environmental standards mandated by federal defense procurement protocols. The work is classified as a subcontract under NAICS code 332119, indicating it falls within the Other Metal Valve and Pipe Fitting Manufacturing category, and the place of performance is designated as Mechanicsburg, Pennsylvania, with a zip code of 17050-2411. The solicitation was posted on July 19, 2026, with a response deadline of July 27, 2026, giving potential suppliers a limited window to submit proposals. The contracting office is the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense, and the official link for the request for quotation is accessible through the DIBBS platform. There is no set-aside designation specified, meaning the opportunity is open to any qualified contractor regardless of business size or socio-economic status. All submissions must be responsive to the drawing and regulatory standards to be considered for award.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 332119
New
DIBBS
BUSHING, SLEEVEThe contract pertains to the procurement of 100 units of a BUSHING, SLEEVE with NSN 5365-01-658-7233 under solicitation SPE4A7-26-T-580J, issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. The delivery is scheduled for 169 days after award, with a response deadline of July 27, 2026, and the place of performance is designated as New Cumberland, PA, 17070-5002. Technical data associated with this item is subject to export control under either ITAR or EAR, requiring prior authorization from the Department of State or Department of Commerce for any disclosure or transfer, including to foreign nationals within the United States. The Defense Logistics Agency restricts access to this controlled data exclusively to contractors holding valid US/Canada Joint Certification Program certification, who have completed mandatory training and questionnaire requirements and received explicit approval from DLA. Contracting personnel must comply with DFARS 252.225-7048 regarding the handling of export-controlled technical data, and only qualified entities authorized by DLA may access or handle the associated information. The contract is classified as a federal solicitation with no set-aside designation, and the NAICS code 332119 indicates it falls under other fabricated metal product manufacturing. Primary point of contact for inquiries is Brandon Smith, reachable via email or phone as listed, with additional details accessible through the DIBBS portal. All parties must ensure strict adherence to export compliance protocols throughout the lifecycle of this procurement.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 332119
New
DIBBS
SPACER, SLEEVEThe contract pertains to the procurement of SPACER, SLEEVE items under solicitation SPE4A7-26-T-580R, specifying a quantity of 36 units with a unit price of $36.00 and a total contract value of $1,296.00. Delivery is required FOB origin within 85 days, with zero variance allowed in quantity, and inspection and acceptance are to occur at the origin. The item is identified by NSN 5365-01-643-4773 and must comply with DLA packaging requirements per MIL-STD-2073-1E, including specific packaging methods, materials, and unit containment protocols. Marking must adhere to MIL-STD-129 with no special marking required, and palletization must follow DLA’s RP001 standards. The technical specifications are governed by referenced drawings and technical data packages, with quality assurance requirements aligned with MIL-STD-1916 or ASQ H1331, mandating zero non-conformances in sampling unless otherwise stated, and assigning verification levels based on attribute criticality. The material has no shelf-life requirement, and government identification must be removed from any non-accepted supplies per RQ011. The contract references DLA’s Master List of Technical and Quality Requirements for all incorporated R and I numbers, and revision control is tied to the solicitation or award date depending on acquisition size. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, with transportation instructions governed by DLAD Proc Note C19 and C20. The need ship date is May 17, 2026, with an original required delivery date of July 29, 2026.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 332119
New
DIBBS
BUSHING, SLEEVEThe contract is for one bushing, sleeve with part number 342-8840300-24 and NSN 5365017184315, issued under solicitation SPE4A7-26-T-581Z. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with sampling procedures mandated to follow MIL-STD-1916 or ASQ H1331 Table 1 using a zero-based acceptance plan unless otherwise specified. Attributes are to be classified with verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively for critical, major, and minor characteristics, with unspecified attributes treated as major. The item must conform to TDP Rev B Gen 2 per basic drawing NR 53711 8840300 revision H dated 09/19/2025, and packaging must comply with MIL-STD-2073-1E and DLA packaging standards, including marking per MIL-STD-129 with no special marking required. Palletization must adhere to DLA packaging guidelines and traceable shipping methods are mandatory; parcel post is prohibited. Delivery is FOB origin with a strict 20-day lead time to be completed by June 12, 2026, and inspection and acceptance occur at destination with zero variance permitted in quantity. The delivery address is the Naval Supply Systems Command warehouse in Mechanicsburg, Pennsylvania, and the contract is managed by the Department of Defense under ASC Supplier Operations AE and AF Division with Hannah Leonard as the primary point of contact.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 332119
New
DIBBS
BUSHING, SLEEVEThe item is a bushing sleeve with NSN 5365-01-625-3773, ordered in a quantity of 99 units under purchase request 7017536491, with a delivery schedule of 169 days after order. The contract is issued under solicitation SPE4A7-26-T-580K, posted on July 19, 2026, with responses due by July 27, 2026, and falls under NAICS code 332119. The procurement is managed by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, with performance located in New Cumberland, Pennsylvania, 17070-5002. Erica Adams at erica.adams@dla.mil is the primary point of contact. Technical data associated with this item is subject to export control under either ITAR or EAR, and its dissemination to foreign persons, whether inside or outside the United States, requires prior authorization from the Department of State or Department of Commerce. DFARS 252.225-7048 governs the handling of this controlled data. Only DLA contractors holding a valid US/Canada Joint Certification Program certification, who have completed the required DOD export control training and questionnaire, and have received formal approval from the DLA controlling authority may access this technical information. Packaging must comply with DLA requirements, and all handling procedures must strictly adhere to export control regulations applicable to U.S. companies and their foreign subsidiaries.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 332119
New
DIBBS
RING, RETAININGThe contract pertains to the procurement of one retaining ring, designated as a commercial off-the-shelf item with part number 25489 and NSN 5325-01-691-1724, supplied by TULSA WINCH, INC. The total contract value is $1.00, with a delivery requirement of five days after receipt of order, and the item must be delivered FOB origin to Fort Stewart, Georgia. All packaging must comply with MIL-STD-2073-1E, including specific preservation methods using cling/dry technique, and marking must strictly adhere to MIL-STD-129 with no special marking required. Palletization follows DLA’s RP001 packaging requirements, and the shipment must use traceable freight methods, explicitly excluding parcel post. Inspection and acceptance occur at the destination point, with sampling conducted under MIL-STD-1916 or ASQ H1331, Table 1, applying zero non-conformances unless otherwise stipulated, and attribute classifications tied to specified verification levels or AQLs. The item is subject to all applicable technical and quality requirements from the DLA Master List, referenced by R and I numbers, and must be accompanied by compliance with hazardous materials labeling under 29 CFR 1910.1200 and DFARS clause 252.223-7001, which mandates prior submission of hazard labels and safety data sheets for non-exempt materials. The contractor is bound by multiple FAR and DFARS clauses addressing cybersecurity, prohibitions on covered telecommunications equipment, trafficking in persons, employment eligibility verification, sustainable products, whistleblower protections, and electronic invoicing via WAWF. Additionally, the contractor must maintain current SAM.gov registration, provide UEI and CAGE code where applicable, and affirm socioeconomic status for potential small business preferences. The contract is awarded without specified type, but the structure and terms suggest an LPTA basis. All documentation and compliance obligations must be met, with no allowances for deviations unless formally authorized, and failure to comply with any clause, especially those concerning hazardous substances or prohibited equipment, may result in rejection or contract termination.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 332119
New
DIBBS
SPACER, SLEEVEThe contract specifies the procurement of 100 units of a spacer sleeve identified by NSN 5365-01-653-6539 and part number NAS42HT4A-46, manufactured in compliance with NAS42 Revision 11. All items must meet stringent technical and quality requirements as defined in the DLA Master List of Technical and Quality Requirements, with sampling governed by MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance criteria unless otherwise stated. Critical application status requires adherence to strict verification levels with AQLs of 0.1 for critical, 1.0 for major, and 4.0 for minor attributes. Packaging must conform to MIL-STD-2073-1E with preservation methods including preservative coating, dry storage, and no cushioning, while marking follows MIL-STD-129 with no special markings required. Palletization complies with DLA packaging standards, and the shipment must be transported via traceable means, excluding parcel post. Delivery is required at origin within five days of contract award, with no tolerance for quantity variance. The consignee and shipping address is the Central Receive and Ship Point at Fort Rucker, Alabama, with the same location designated as the markfor point. The required delivery date is June 15, 2026, with no need ship date specified. Inspection and acceptance occur at origin, and the contract is issued under solicitation SPE4A6-26-T-07SP with a total price of $100.00 for the lot. The item is classified for federal use, with procurement managed by the DLA Commodities Division, and all references to unit of issue align with ANSI X12 standards. Final documentation must reflect the DLA-mandated tracking codes, project codes, and government-used identifiers including IPD and DIC codes.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 332119
New
DIBBS
BUSHING, NONMETALLICThe contract is for the procurement of 215 nonmetallic bushings with NSN 5365-01-624-6947 under solicitation SPE4A7-26-T-580H, with a response deadline of July 27, 2026, and a delivery requirement of 169 days after order. The item is subject to stringent technical and quality requirements as defined in the DLA Master List of Technical and Quality Requirements, including tailored higher-level quality standards applicable to both manufacturers and non-manufacturers, inspection and acceptance at origin, and strict protocols for removing government identification from non-accepted supplies. Physical identification and bare item marking must comply with specified standards, and the technical data associated with the bushing is controlled under export regulations, either ITAR or EAR, requiring prior authorization from the Department of State or Department of Commerce for any disclosure to foreign persons, including those located within the United States. Access to this data is restricted to DLA contractors with approved US/Canada Joint Certification Program status, who have completed mandatory training on handling export-controlled technical data and received formal approval from DLA. Packaging must adhere to DLA procurement standards, and cybersecurity requirements mandate CMMC Level 2 certification for third-party assessors involved in the supply chain. The place of performance is specified as New Cumberland, PA, 17070-5002, and the primary point of contact is Jamiah Sutton of the Department of Defense, ASC Supplier Operations AE and AF Division.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 332119
New
DIBBS
WINDOW, DIALThe contract involves the procurement of six WINDOW DIAL units under NSN 5355-01-654-5859, with a delivery requirement within 31 days of award. The solicitation number is SPE7L5-26-T-4310, issued on July 17, 2026, with responses due by July 22, 2026, and is managed by the Department of Defense under the Land Supplier Ops Engines organization. The place of performance is identified as New Cumberland, Pennsylvania with a zip code of 17070-5002, and the primary point of contact is Paul Doerfler, reachable via email and phone. This procurement operates under the DLA Packaging Requirements and incorporates technical and quality specifications referenced in the DLA Master List of Technical and Quality Requirements, which are accessible online; the applicable revision of the master list is determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions unless an amendment supersedes it. The NAICS code is 332119 and the acquisition type is federal, with no set-aside designation. The contract mandates the removal of government identification from any non-accepted supplies.
LAND SUPPLIER OPNS ENGINES

POSTED

3 days ago

DEADLINE

in 2 days
View Details
NAICS: 332119
New
Federal
PLUG,MACHINE THREADThis contract pertains to the procurement of a machine thread plug designated as SPECIAL EMPHASIS material (Level I), critical to a shipboard system where failure could result in catastrophic consequences including loss of life or vessel. The item must be manufactured strictly in accordance with Naval Sea Systems Command drawing 6758076 and associated liability ER2643-820-23C4, with material specified as ASTM-B139, UNS C51000, Temper H04. All materials require full traceability from raw stock to finished component, with mandatory heat-lot or traceability markings permanently affixed in compliance with MIL-STD-792, and must be accompanied by certified chemical and mechanical test reports that meet exacting standards. Electronic submission of Objective Quality Evidence (OQE), including certifications and test data, is required via the Wide Area WorkFlow (WAWF) system to Portsmouth Naval Shipyard using DODAAC N50286 for shipping, inspection, and acceptance, with a mandatory notification email to PORT_PTNH_WAWF_NOTIFICATION@NAVY.MIL. No material may be shipped until formal acceptance is granted. The contract mandates a comprehensive quality assurance program requiring ISO-9001 with ISO-10012 or ANSI-Z540.3 and ISO/IEC 17025 compliance, or an acceptable alternative under MIL-I-45208 and MIL-STD-45662, with all processes subject to government inspection at source. Welding and brazing must follow S9074-AQ-GIB-010/248 or 0900-LP-001-7000, with prior submission and approval of weld procedures and qualification data. All weld filler metals require certification of LOT numbers and conformity to specification, and electronic signatures on documentation are permitted with strict controls to ensure authenticity and prevent tampering. Final inspection demands 100% verification of traceability, certification legibility, and compliance with zero defect acceptance criteria, with sampling guided by ANSI/ASQ Z1.4 unless otherwise specified. The order is DO-rated under the Defense Priorities and Allocations System, issued under Emergency Acquisition Flexibilities, and subject to a one-year warranty from date of delivery. The contract also enforces Buy American Act compliance, mercury-free requirements, and strict configuration control, requiring Engineering Change Proposals for any modifications impacting form,
Navsup Weapon Systems Support Mech

POSTED

3 days ago

DEADLINE

in 17 days
View Details
NAICS: 332119
New
DIBBS
Precision Spacer Sleeve SupplyThe contract requires the manufacture or supply of 16 precision spacer sleeves identified by NSN 5365017364566, engineered to meet exact federal specifications for form, fit, and function, ensuring seamless integration into military systems. Full compliance documentation must be provided to verify adherence to all technical and quality standards, with no deviations permitted. The work is classified as a subcontract under NAICS code 332119, indicating it falls within miscellaneous fabricated metal product manufacturing, and is issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. Performance is designated for New Cumberland, Pennsylvania, with the zip code 17070-5002 as the sole place of delivery or execution. All bids must be submitted by the response deadline of July 24, 2026, with the solicitation posted on July 16, 2026, allowing potential suppliers a precise eight-day window to prepare and respond. The contract does not specify a set-aside type, meaning it is open to all qualified vendors regardless of business size or ownership status. There is no designated point of contact listed, and the official solicitation details can be accessed via the provided DIBBS link, which serves as the authoritative source for submission instructions and technical requirements.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

4 days ago

DEADLINE

in 4 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 541512
New
DIBBS
Cybersecurity Compliance and CDI SafeguardingThe contract requires the implementation and ongoing maintenance of NIST SP 800-171 security controls to safeguard covered defense information, ensuring compliance with federal cybersecurity standards for protected data handled by subcontractors. It mandates strict adherence to cyber incident reporting requirements as outlined in FAR 52.204-21, obligating immediate notification and coordination with government authorities in the event of a security breach or suspicious activity affecting CDI. The work is classified as a subcontract under the NAICS code 541512, indicating services in custom computer programming and related cybersecurity support, and is issued by the Department of Defense, specifically the ASC Commodities Division, with a response deadline of August 3, 2026. All performance must be carried out in alignment with the NIST framework to maintain the integrity, confidentiality, and availability of sensitive defense data throughout the contract lifecycle.
Computer Systems Design Services

POSTED

about 5 hours ago

DEADLINE

in 14 days
View Details
NAICS: 541618
New
DIBBS
Supply Chain Compliance and Reporting ServicesThe contract requires comprehensive monitoring and reporting of supply chain risks to ensure compliance with DFARS and Section 889 regulations, focusing on the identification and timely disclosure of non-compliant items within a 72-hour window. It includes the tracking of restricted foreign products and mandates the validation of all supplier UEI and CAGE codes to verify identity and eligibility, ensuring that only authorized entities are included in the supply chain. This active surveillance and reporting framework is designed to prevent the introduction of compromised or prohibited components into defense-related systems. The contract is classified as a subcontract under NAICS code 541618 and is issued by the ASC Commodities Division of the Department of Defense. Response submissions are due by August 3, 2026, with the solicitation posted in July 2026. Performance is expected to support DoD supply chain integrity without specified geographic limitations, and the work is conducted under strict regulatory oversight to enforce national security standards. The requirement reflects a priority on transparency, accountability, and real-time compliance across all tiers of supplier activity.
Other Management Consulting Services

POSTED

about 5 hours ago

DEADLINE

in 14 days
View Details
NAICS: 488999
New
DIBBS
Defense-Compliant Packaging and Marking ServicesThe contract requires comprehensive packaging, labeling, and marking of defense items in strict accordance with MIL-STD-129 standards, ensuring all items are properly identified, tracked, and prepared for military logistics. This includes serialized marking for individual unit traceability, compliant handling of hazardous materials, and generation of shipping documentation fully compatible with the Wide Area WorkFlow system to support automated receipt and inventory management. All work must meet Defense Department specifications for durability, clarity, and regulatory adherence throughout the supply chain. The solicitation is classified as a subcontract under NAICS code 488999, issued by the ASC Commodities Division within the Department of Defense. Responses are due by August 3, 2026, with the contract posting dated July 20, 2026. The place of performance and exact location details are not specified, but the work is expected to support federal defense logistics infrastructure. Interested parties must submit proposals through the official DIBBS portal before the deadline to be considered for award.
All Other Support Activities for Transportation

POSTED

about 5 hours ago

DEADLINE

in 14 days
View Details
NAICS: 541380
New
DIBBS
Quality Inspection and Testing ServicesThe contract entails independent inspection, sampling, and test reporting services for collar assemblies, requiring adherence to MIL-STD-1916 and ASQ Z1.4 standards for quality control and statistical sampling procedures. It includes formal execution of Factory Acceptance Testing and Preliminary Live Testing, with comprehensive documentation of all test results and non-conformance events to ensure full compliance and traceability. All deliverables must be rigorously recorded and submitted in formal reporting formats to meet defense quality assurance requirements. The work is categorized under NAICS code 541380 and is issued as a subcontract by the ASC Commodities Division under the Department of Defense. The solicitation was posted on July 20, 2026, with responses due by August 3, 2026, and performance is expected to support defense logistics and procurement efforts without specifying a particular location. Interested parties must respond through the DIBBS portal before the deadline to be considered for award.
Testing Laboratories and Services

POSTED

about 5 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332999
New
DIBBS
Precision Manufacturing of Defense Collar AssemblyThe contract entails the precision manufacture, first article testing, and production lot testing of a defense-specific Collar Assembly identified by NSN 1615-01-622-6850, adhering strictly to military specifications. Full traceability throughout all manufacturing stages is required, along with comprehensive compliance documentation to ensure adherence to defense quality and safety standards. The work involves rigorous testing protocols to validate performance and reliability under operational conditions, with all outputs subject to verification and approval by the contracting authority. The project demands exacting control over materials, processes, and inspections to meet the stringent demands of military applications. This subcontract opportunity, issued by the ASC COMMODITIES DIVISION under the Department of Defense, is open for responses until August 3, 2026. The NAICS code 332999 indicates it falls under other fabricated metal product manufacturing, with performance expected to comply with all relevant defense logistics and procurement requirements. The solicitation is posted on the DIBBS platform, and all participants must be prepared to meet the high standards of accountability and documentation expected in defense supply chain operations. While no set-aside provisions are specified, bidders must demonstrate capability, capacity, and prior experience in producing critical military components with verified quality assurance systems.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 14 days
View Details
NAICS: 336419
New
DIBBS
GYRO-OPTICS ASSEMBLThe contract pertains to the procurement of 16 units of a GYRO-OPTICS ASSEMBLY with NSN/part number 1420-01-686-9216 under solicitation SPE4A6-26-T-07VU, issued by the Defense Logistics Agency’s ASC Commodities Division. Delivery is required within 633 days of award, and the solicitation is a total small business set-aside under NAICS code 336419. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, with the applicable revision tied to the solicitation issue or award date depending on acquisition size. The item falls under export control regulations—either ITAR or EAR—prohibiting any disclosure or transfer of associated technical data to foreign persons without prior authorization from the Department of State or Commerce, and only contractors with approved JCP certification, completed DLA training, and formal approval may access such data. Compliance with specific documentation, inspection, and configuration management protocols is mandatory, including adherence to MIL-STD-1916 or ASQ H1331 for sampling, zero-defect acceptance unless otherwise stated, and implementation of CMMC Level 2 certification for cybersecurity. All items must meet DLA packaging standards and physical marking requirements, and no government identification may be removed from non-accepted supplies. Configuration changes require formal engineering change proposals, and source approval documentation must be submitted per RC001. Inspection and acceptance may occur at the manufacturer’s location, and item unique identification is not required per the customer’s request, though DFARS 252.211-7003 remains applicable. The point of contact for inquiries is Jennifer Jacobs, and proposals must be submitted by the specified deadline, with performance taking place in New Cumberland, Pennsylvania.
Other Guided Missile and Space Vehicle Parts and Auxiliary Equipment Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
WASHER, SPLITThe contract pertains to the procurement of four split washers with part number M800006SS and NSN 5310017274766, under solicitation SPE4A6-26-T-07WM, with a required delivery within ten days of award. The item must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which supersede any other standards such as ASTM D3951. Packaging must adhere to MIL-STD-129 for marking and labeling and conform to DLA Packaging Requirements (RP001), with palletization also governed by those directives. All packaging must follow ASTM D3951 unless overridden by DLA requirements. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, with attributes classified per VII, IV, and II verification levels or corresponding AQLs of 0.1, 1.0, and 4.0. Unit of issue is each (EA), with no quantity variance permitted. Delivery is FOB origin, with inspection and acceptance occurring at the destination. Item Unique Identification is not required per service customer request. The shipment must be sent via the fastest traceable means excluding parcel post to the specified delivery point in Lexington, KY, with the same address used for marking. The contract specifies no shelf life and applies Covered Defense Information provisions. The delivery deadline is June 18, 2026, with a solicitation response deadline of July 28, 2026, and contracting oversight is managed by the ASC Commodities Division under the Department of Defense.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335931
New
DIBBS
CABLE ASSEMBLY, SPECThis contract specifies the procurement of a special-purpose electrical cable assembly with part number 5995-15-179-3265, manufactured by NORTHROP GRUMMAN ITALIA S.P.A, under solicitation SPE4A6-26-R-0258. A total of 43 units are required at a firm fixed price with no variance allowed in quantity, and delivery is mandated within 318 days after the award date. The item is classified as a critical application item and must comply with stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements. Packaging must adhere to MIL-STD-2073-1E and DLA Packaging Requirements, including specific methods for preservation, wrapping, and containerization, with marking in accordance with MIL-STD-129 and no special marking codes applied. Palletization follows DLA guidelines and transportation logistics are governed by DLAD procedural notes. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 with zero non-conformances required in sampling unless otherwise specified, and critical, major, and minor attributes must be verified at levels VII, IV, and II respectively, or with AQLs of 0.1, 1.0, and 4.0. The contract incorporates cybersecurity compliance under CMMC Level 2 self-assessment, and Covered Defense Information requirements apply. Inspection and acceptance occur at the destination, with FOB origin terms. Item Unique Identification is waived per customer request, and DFARS 252.211-7003(c)(1)(i) governs the exemption. The unit of issue is each, and suppliers must reference the official DoD unit of issue conversion table. All documentation and compliance obligations are tied to revisions in effect at the solicitation or award date, and the supplier must ensure removal of government identification from non-accepted supplies and apply physical identification to bare items as required.
Current-Carrying Wiring Device Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 30 days
View Details
NAICS: 334514
New
DIBBS
INDICATOR, SIGHT, LIQUIDThe contract pertains to the procurement of two units of an Indicator, Sight, Liquid, identified by NSN 6680013388470 and part number 08S01507-0002, furnished by Fairbanks Morse, LLC. All items must adhere strictly to MIL-STD-2073-1E packaging standards and MIL-STD-129 marking requirements, with special marking code 05 indicating the item is a delicate instrument. Packaging and preservation must comply with DLA-specific requirements, including a prohibition on mercury or mercury compounds in any preservation, packaging, or marking materials, except for approved functional uses such as in batteries, instruments, or sensors as specified by NAVSEA. Portable devices containing mercury must include shock protection and a secondary containment boundary. The contract enforces zero-defect sampling under MIL-STD-1916 or equivalent zero-based plans, with unspecified attributes treated as major and acceptance criteria requiring no non-conformances in the sample lot unless otherwise stated. Unit of issue is each, with a firm quantity of two, no variance permitted, and delivery is FOB origin. Items must reach the destination at DLA Distribution, New Cumberland, Pennsylvania, within 158 days of contract award, with a required ship date of January 3, 2027. The material is non-hazardous, exempt from SDS requirements, and not subject to Unique Item Identification under DFARS 252.211-7003. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with revision control aligned to the solicitation issue date. All transportation and shipping logistics must follow DLAD Proc Note C19 and C20.
Totalizing Fluid Meter and Counting Device Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 333912
New
DIBBS
DISCONNECT ASSEMBLYThe contract pertains to the procurement of a disconnect assembly for a compressor, identified by part number 2210191-1 and NSN 4310013195804, with a quantity of two units. Delivery is required within 672 days from the contract award, with shipment originating FOB origin and final inspection and acceptance occurring at the destination facility in Cherry Point, North Carolina. The product must comply with all technical and quality requirements specified in the DLA Master List of Technical and Quality Requirements, referenced by R-numbers such as RA001, RQ001, RQ002, and RQ017, which govern configuration management, quality assurance, and bare item marking. Although item unique identification is not mandated, all packaging and labeling must adhere strictly to MIL-STD-129 and ASTM D3951, with palletization following DLA packaging protocols. Sampling and inspection must follow MIL-STD-1916 or an approved zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively, or AQLs of 0.1, 1.0, and 4.0. Any non-conformance requires zero tolerance unless otherwise contracted. The supplier must submit documentation for source approval, manage configuration changes through formal engineering change proposals, and ensure all government identification is removed from non-accepted items per RQ011. The contract specifies a unit price of $0.00 per unit, indicating the value is included under a larger contract structure. The required delivery date is May 31, 2028, with no variance allowed in quantity. All transportation and shipping directives are governed by DLAD procedural notes C19 and C20, and the point of contact for inquiries is Keshia Mosley.
Air and Gas Compressor Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CLOSE TOLERANCEThe item specified is a screw with close tolerance requirements, identified by NSN 5305-01-047-8822, with a quantity of 50 units required under purchase request 7017548847. Delivery is expected within five days of award. This procurement is governed by strict export control regulations, as the technical data associated with the screw is subject to either the International Traffic in Arms Regulations or the Export Administration Regulations. Any disclosure of this technical data to foreign persons, regardless of location, constitutes an export and requires prior authorization from the U.S. Department of State or Department of Commerce. Access to this data is restricted to contractors who hold an approved U.S./Canada Joint Certification Program certification, have completed mandatory training on handling Department of Defense export-controlled technical data, and have been formally approved by the Defense Logistics Agency. DFARS 252.225-7048 applies to all handling and dissemination of this information. The solicitation number is SPE4A6-26-T-07WL, posted on July 20, 2026, with responses due by July 28, 2026. The contracting activity is under the ASC Commodities Division of the Department of Defense, and the point of contact is Charece Smith, reachable at the provided phone and email.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332618
New
DIBBS
PIN, STRAIGHT, HEADEDThe contract specifies the procurement of 89 straight-headed pins identified by NSN 5315-01-605-7397 under solicitation SPE4A6-26-T-07VH, with a total value based on a unit price for each item and a required delivery within 165 days from the award date. The items must comply with technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, including packaging standards per MIL-STD-129 and ASTM D3951, though DLA requirements take precedence. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise defined, and attributes are assigned verification levels or AQLs of VII, IV, and II for critical, major, and minor characteristics respectively. The product must conform to NASM20392 Rev 01 and NASM5673 Rev 1, with bare item marking and identification per RQ017, and government identification removed from non-accepted items under RQ011. Inspection and acceptance occur at origin, with no variance allowed in quantity. Packaging must adhere to RP001 DLA packaging standards and be palletized accordingly, shipped FOB origin to the delivery address in New Cumberland, Pennsylvania. The contract is a Total Small Business Set-Aside under NAICS code 332618, with a response deadline in July 2026 and delivery required no later than March 7, 2027.
Other Fabricated Wire Product Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details