Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

SPACER, PLATE

Active
SPE4A7-26-T-596TFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of two spacer plates identified by part number 78250-13175-101 and NSN 5365016925044, pursuant to solicitation SPE4A7-26-T-596T, with a required delivery date of May 12, 2026, and a delivery window of 20 days from contract award. All supplies must comply with technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, specifically addressing packaging, labeling, inspection, and measurement standards including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and MIL-STD-1916 or ASQ H1331 for sampling, with zero non-conformances required in the sample lot unless otherwise specified. Inspection and acceptance occur at the destination, with no tolerance for quantity variance. Items must be palletized and prepared in accordance with DLA packaging requirements and marked without special codes as per instructions. The product is to be shipped by traceable freight only, not parcel post, to Davis Mountain AFB, Arizona, with the delivery address and contact information clearly specified. The contractor must use approved measuring and test equipment and adhere to defined verification levels for critical, major, and minor attributes, with attributes left unspecified treated as major. The unit of issue is each, priced at a total of two units, and the procurement is governed by federal acquisition protocols under the Department of Defense, with Wendy Jones listed as the primary point of contact.

General Info

Procure two spacer plates, part 78250-13175-101, deliver by May 12, 2026, per DLA and MIL standards to Davis Mountain AFB.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

332119 - Metal Crown, Closure, and Other Metal Stamping (except Automotive)View NAICS

Place of Performance

5165 E KACHINA ST BLDG 5111, DAVIS MONTHAN AFB, AZ, 85707-4916, US

Set-Aside

NONE

Documents

(1)

SPE4A7-26-T-596T.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV
View Agency Profile
Office AddressUS
Contacts
WENDY JONES
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SPACER,PLATE
SPACER, PLATE
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RT001: MEASURING AND TEST EQUIPMENT
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
SIKORSKY AIRCRAFT CORPORATION 78286 P/N 78250-13175-101
TDP Rev A Gen 1 IAW REFERENCE REVISION NR DTD PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE4A7-26-T-596T
SECTION B
PR: 7016771721 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7016771721 0001 EA 2.000
NSN/MATERIAL:5365016925044
DELIVERY (IN DAYS):0020
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:31 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:BL OPI:M
INTRMDTE CONT:ED INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
FB4877
FB4877 355 LRS LGRDDC
CP 520 228 3634
5165 E KACHINA ST BLDG 5111
DAVIS MONTHAN AFB AZ 85707-4916
US
SHIP BY TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
FB4877
FB4877 355 LRS LGRDDC
CP 520 228 3634
5165 E KACHINA ST BLDG 5111
DAVIS MONTHAN AFB AZ 85707
US
M/F: (TCN) FB487761271423
RDD:
PROJ: TP 3
SUPP ADD: SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 12
DIC: A0A DIST: 01 ADV: FC: 6C
Need Ship Date:00/00/0000 Original Required Delivery Date:05/12/2026
SPE4A7-26-T-596T
SECTION B
PR: 7016771721 PRLI: 0001 CONT’D
SPE4A7-26-T-596T NSN/Part Number: 5365-01-692-5044 Quantity: 2 EA Purchase Request: 7016771721QTY: 2 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332119
New
DIBBS
SPACER, RINGThe contract is for one spacer ring identified by NSN 5365-15-120-2240 and part number 60154625 manufactured by IVECO DEFENCE VEHICLES S.P.A., classified as a commercial item under DoD procurement guidelines. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible via the DLA website, with applicable revisions tied to the solicitation or award date depending on acquisition size. Packaging must comply with MIL-STD-2073-1E and DLA packaging standards, including specific methods for preservation, wrapping, and unit containerization, with marking conforming to MIL-STD-129 and no special marking codes applied. Sampling and inspection follow MIL-STD-1916 or comparable zero-based plans, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively, and acceptance requires zero non-conformances unless otherwise directed. Delivery is FOB origin within 20 days, with inspection and acceptance occurring at destination, and no quantity variance is permitted. The item must be shipped by the fastest traceable means, explicitly excluding parcel post, to the designated military destination in Camp Lejeune, North Carolina. The contract is issued under solicitation SPE7L1-26-T-884G with a required delivery date of July 22, 2026, and ties to a purchase request number 7017607337 under a single unit of issue at a fixed price of $1.00. Government-specific data codes and shipping instructions are provided for logistics coordination, with procurement oversight by the Department of Defense’s Land Supply Chain through Katherine Woods as the point of contact.
LAND SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332119
New
DIBBS
SPACER, STRAIGHTThe contract specifies the procurement of five straight spacers identified by NSN 5365-01-670-7905 and part number 92510A810 from McMaster-Carr Supply Company, with a unit price of five dollars per item and a total contract value of twenty-five dollars. Delivery is required within twenty days to the destination FPO AE 09577 aboard the USS LABOON DDG 58, with FOB destination terms, zero quantity variance allowed, and inspection and acceptance occurring upon arrival. Packaging must comply with MIL-STD-2073-1E, marking must adhere to MIL-STD-129 without special markings, and palletization must follow DLA packaging requirements. Sampling for quality assurance follows MIL-STD-1916 or a comparable zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; zero non-conformances are required unless otherwise stated. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled based on acquisition type and amendment dates. The shipment must be made using the fastest traceable means, prohibiting parcel post, and must reference DLA procedural notes for transportation logistics. The original delivery deadline is July 22, 2026, and all requirements are issued under solicitation SPE4A7-26-T-597T by the Department of Defense, with point of contact Channon Dillard at DLA.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332119
New
DIBBS
SPACER, SPECIAL SHAPThis contract covers the procurement of a spacer with a special shape, identified by part number 06386-05011-102 and NSN 5365-01-717-8144, for a quantity of five units. The item is classified as a critical application item for Sikorsky Aircraft Corporation and must comply with stringent technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements. Sampling must adhere to MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attributes are to be assigned verification levels or AQLs as specified. Packaging must conform to MIL-STD-2073-1E with preservative method 31, and marking must follow MIL-STD-129 with no special marking codes applied. Palletization and logistics must meet DLA packaging requirements, and all shipments are to be delivered FOB origin to the designated destination in New Cumberland, Pennsylvania, with a delivery timeline of 129 days from the award date. The contract enforces a zero variance in quantity and requires inspection and acceptance at the destination. Documentation for source approval and compliance with all referenced standards is mandatory, and the unit of issue is the each. The required ship date is May 12, 2026, with the original delivery due by August 25, 2026.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332119
New
DIBBS
SPACER, PLATEThe contract is for the procurement of 105 SPACER, PLATE units with NSN 5365-01-718-3545 under solicitation SPE4A5-26-T-311J, issued by the Department of Defense through the ASC SUPPLIER OPER OEM DIVISION. Delivery is required within 129 days after award, and the solicitation closed on August 5, 2026. Technical and quality requirements are defined by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must comply with DLA standards, and government identification must be removed from non-accepted items. All items require physical identification marking per RQ017, and inspection sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances unless otherwise specified, assigning verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 for critical, major, and minor attributes respectively. Configuration changes require formal engineering change proposals or variance requests under RQ002, and source approval documentation is mandatory under RC001. The item contains controlled technical data subject to ITAR or EAR regulations, with disclosure or export restricted to contractors who hold approved US/Canada Joint Certification Program status, have completed mandatory DOD export control training, and have received formal authorization from DLA. Access to this data is strictly limited, and DFARS 252.225-7048 governs its handling. The place of performance is New Cumberland, PA, with Johquin Wiley designated as the primary point of contact.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332119
New
DIBBS
SHIMThe contract pertains to the procurement of a shim item identified by NSN 5365017180938 and part number 06070-20002-103, with a quantity of six units to be delivered FOB origin within 129 days of contract award, no variance allowed in quantity. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation issue date controlling compliance. Packaging must adhere to MIL-STD-2073-1E and DLA Packaging Requirements, including specific procedures for preservation, wrapping, and marking per MIL-STD-129 with no special marking required. Item Unique Identification is not mandated per the service customer’s request, and sampling follows Sikorsky Corporation’s approved alternate plan meeting or exceeding ASQ H1331 or MIL-STD-1916 standards. Inspection and acceptance occur at the destination, with delivery directed to the DLA Distribution facility in New Cumberland, Pennsylvania. The contract is issued under solicitation SPE4A5-26-T-311L, with a required ship date of May 12, 2026, and an original delivery deadline of August 26, 2026. Unit of issue is each, priced at six dollars per unit, with total value of thirty-six dollars. All transportation logistics are governed by DLA procedural notes C19 and C20, and the primary point of contact is Johquin Wiley of the Department of Defense.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332119
New
DIBBS
BUSHING, SLEEVEThe contract is for the procurement of five BUSHING, SLEEVE parts with NSN 5365-01-715-9942 and part number 06208-03011-102, supplied by SIKORSKY AIRCRAFT CORPORATION under solicitation SPE4A5-26-T-311G. The item is designated as a critical application component and must comply with stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date. Packaging and marking standards are strictly defined per MIL-STD-2073-1E and MIL-STD-129, with no special marking required, and palletization must adhere to DLA’s packaging requirements. Sampling and inspection protocols must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances permitted unless otherwise stated, and unspecified attributes are treated as major. The parts must be delivered FOB origin with no quantity variance allowed, inspected and accepted at destination, and delivered to the DLA distribution facility in New Cumberland, PA by May 12, 2026, with a contractual delivery window of 129 days. Documentation requirements for source approval are mandated, and government identification must be removed from non-accepted items. All aspects of supply, from identification to delivery, are governed by DLA procedures and DoD unit of issue standards.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332119
New
DIBBS
RING, RETAININGThe contract is for one retaining ring, commercial off-the-shelf item with part number 25489 and NSN 5325-01-691-1724, supplied by TULSA WINCH, INC., under solicitation SPE4A0-26-T-4072. The item must comply with technical and quality requirements referenced from the DLA Master List, including packaging standards per MIL-STD-2073-1E and marking per MIL-STD-129, with no special marking required. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 Table 1, using zero defect acceptance unless otherwise defined, with attributes classified as VII, IV, and II for critical, major, and minor characteristics respectively. The delivery is FOB origin with a five-day window from the contract award, and the destination is Camp Humphreys, Building P6953, Pyeongtaek, South Korea, under RDD 999/NMCS shipment per DLAD PROC NOTE C19 and C20. The unit of issue is each, quantity is one, and the purchase request is 7017607648; there is zero variance allowed in quantity. Packaging must adhere to DLA requirements, including palletization and preservation methods, and the item must be delivered by July 23, 2026. All contractual obligations, including government-specific identifiers and shipping instructions, are bound by strict compliance procedures, and the contract is managed by the Department of Defense’s Aviation Supply Chain ESoC Buys, with Danita Davis as the point of contact.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332119
New
DIBBS
SPACER, SLEEVEThe contract pertains to the procurement of 36 units of SPACER, SLEEVE, identified by NSN 5365016434773, under solicitation SPE4A7-26-T-580R, with delivery required within 85 days after award, targeting a ship date of May 17, 2026, and a required delivery date of July 29, 2026. The item must be manufactured and delivered FOB origin, with inspection and acceptance occurring at the contractor’s facility, and no quantity variance is permitted. Packaging must strictly adhere to MIL-STD-2073-1E, using a unit pack configuration with elasticized cover, no cushioning, and intermediate containers holding 44 units each, all palletized per DLA Packaging Requirements RP001. Marking is required to comply with MIL-STD-129, including standard barcoding and bare item labeling per Technical Data Package revisions referencing drawings 19207 12420325 and 19207 12532075, with no special marking codes applied. The material has no shelf-life requirement, and preservation requires desiccant drying with clean and dry handling. Quality assurance follows MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required in sampled lots unless otherwise specified; critical, major, and minor attributes must be verified at AQLs of 0.1, 1.0, and 4.0 respectively. Technical and quality requirements are incorporated by reference from the DLA Master List, and compliance with hazardous materials labeling under 29 CFR 1910.1200 is mandatory. Delivery is designated to DLA Distribution in New Cumberland, Pennsylvania, and payment must be processed via WAWF. The contract incorporates numerous DFARS and FAR clauses including NIST SP 800-171 cybersecurity requirements, prohibitions on hexavalent chromium and trafficking in persons, employment eligibility verification, sustainable products, and limitations on foreign-flag vessel transportation. Subcontracting for commercial items follows deviation-clause 252.244-7999, and small business subcontracting obligations are enforced. The solicitation is governed by the DLA Master Solicitation for Automated Simplified Acquisitions, and all responses must
ASC SUPPLIER OPER AE AND AF DIV

POSTED

1 day ago

DEADLINE

in 2 days
View Details
NAICS: 332119
New
DIBBS
HANDLE, ROD, VALVEThe contract solicitation SPE7L3-26-T-117N seeks 35 units of HANDLE, ROD, VALVE (NSN 5355-01-480-3520) for delivery to BARSTOW, CA 92311-5014 within 88 days after award, with a need ship date of July 9, 2026, and a required delivery date of December 6, 2026. The contract is issued by the Defense Logistics Agency under the Land Supplier Ops Vehicle Support office using simplified acquisition procedures, with pricing not specified in the solicitation and no estimated contract value available. All deliverables must comply with DLA Master List of Technical and Quality Requirements, which supersedes ASTM D3951 packaging standards, and must adhere to RP001 for palletization and MIL-STD-129 for marking, labeling, and bar-coding of shipments. Hazardous materials must be labeled per 29 CFR 1910.1200, and any radioactive content must be disclosed. Transportation by sea must be conducted on U.S.-flag vessels unless waived in writing, and Safety Data Sheets are required for all hazardous substances. Inspection and acceptance occur at the destination, with the Government responsible for final acceptance. The contract incorporates multiple FAR and DFARS clauses including those related to equal opportunity, combating trafficking, employment eligibility, sustainable products, cybersecurity safeguards, hazardous material handling, and prohibition of covered telecommunications equipment. Contractor representations regarding small business status, UEI/CAGE codes, and covered defense equipment must be provided as applicable. Invoicing is exclusively through Wide Area WorkFlow, and all submissions must be made via the DIBBS portal by the deadline of July 30, 2026. Contract type remains unspecified, and no evaluation factors, weights, or basis of award are stated, indicating administrative or LPTA-style award procedures may apply. The contract does not define option quantities, delivery ranges, or specific funding information, with all accounting details to be determined upon award.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

1 day ago

DEADLINE

in 2 days
View Details
NAICS: 332119
New
DIBBS
INSERT, SCREW THREADThe solicitation pertains to the supply of 2,013 screw thread inserts with NSN 5325-00-597-3305 under a total small business set-aside, with delivery required within 265 days of award. A mandatory first article testing requirement applies to three units of this item, with the contractor responsible for conducting tests and submitting a formal report within 45 days of contract issuance. The contractor must provide written notice at least 14 calendar days prior to shipment for government inspection and must retain the approved first article units as a manufacturing standard until all production is completed and accepted, following DFARS guidelines for disposition. The Defense Contract Management Agency’s Administrative Contracting Officer has been delegated authority to approve or disapprove the first article test report, with findings to be communicated to both the contracting officer and the appropriate oversight offices. Quoting contractors must not provide covered telecommunications equipment or services as defined by FAR and DFARS clauses, and must comply with domestic sourcing requirements under the Berry Amendment and Buy American Act, particularly as the threshold has been lowered to $150,000, requiring disclosure if non-domestic materials are proposed. Small business joint ventures must submit specific certifications for eligibility categories. Contractors must also adhere to strict limitations on additive manufacturing—no offers including AM-produced items will be considered unless explicitly approved by the contracting officer. Additionally, vendors must prepare for mandatory registration via DLA’s AMPS system to access the Vendor Shipment Module and maintain shipping capability, with schema updates required for WebServices users. Offerors are strongly advised to submit quantity ranges to facilitate award flexibility and avoid administrative delays, and must comply with DIBBS protocols, including submitting a “No Bid” notice if unable to quote by the deadline.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 332119
New
DIBBS
BUSHING, NONMETALLICThe contract solicitation SPE4A7-26-T-580H seeks the procurement of 215 nonmetallic bushings with part number 5365-01-624-6947, to be delivered to DLA Distribution in New Cumberland, Pennsylvania, 169 days after order placement, with an FOB origin term. The items must comply with stringent packaging and marking standards, including MIL-STD-2073-1E for packaging data and MIL-STD-129 for shipment labeling, with prohibited use of mercury or mercury compounds in packaging or preservation. The contract mandates inspection and acceptance at origin, requiring manufacturers to maintain quality systems aligned with SAE AS9003 or ISO 9001 tailored to AS9003, and to adhere to acceptance criteria with zero non-conformances for critical attributes under MIL-STD-1916 sampling. Technical data associated with the product is subject to export controls under ITAR or EAR, and only contractors approved by DLA through the US/Canada Joint Certification Program, trained in export-controlled data handling, and cleared via DLA’s questionnaire may access such information. Compliance with DFARS 252.225-7048 and the requirement to remove government identification from non-accepted supplies are enforced, along with physical marking of bare items per RQ017. The contract incorporates multiple federal and Defense Federal Acquisition Regulation Supplement (DFARS) clauses governing cybersecurity, labor practices, hazardous materials, and data protection, including mandatory adherence to Cybersecurity Maturity Model Certification (CMMC) Level 2 for third-party assessment organizations, safeguarding covered defense information under DFARS 252.204-7012, and compliance with trafficking-in-persons, employment eligibility verification, and sustainable products requirements. Contractors must submit Safety Data Sheets for all hazardous materials, adhere to prohibition on hexavalent chromium, and notify the government prior to delivering items containing radioactive materials exceeding regulatory thresholds. Invoicing must be processed exclusively through Wide Area WorkFlow (WAWF), and payment is governed by DoDAAC-specific financial identifiers. The contracting officer, Jamiah Sutton, is the primary point of contact, while the place of performance and delivery is confirmed as New Cumberland, PA. No contract value is stated due to incomplete pricing data in Section B, and no evaluation factors or formal attachments are provided in Section M or J, indicating the solicitation
ASC SUPPLIER OPER AE AND AF DIV

POSTED

1 day ago

DEADLINE

in 2 days
View Details
NAICS: 332119
New
Federal
SHIMThis contract pertains to the procurement of a SHIM designated as SPECIAL EMPHASIS material (Level I) for use in a critical shipboard system, where failure could lead to catastrophic consequences including loss of life or the vessel itself. The item must be manufactured strictly in accordance with NAVSEA Drawing 4558796, with mandatory compliance to a suite of technical standards including ISO-9001, ISO-10012, ISO/IEC 17025, MIL-STD-792, and ANSI/ASQ Z1.4, or approved alternates such as MIL-I-45208 and MIL-STD-45662. The supplier must maintain a documented quality system subject to government audit, ensure complete traceability from raw material through final delivery using permanent markings compliant with MIL-STD-792, and submit 100% inspected Objective Quality Evidence linked directly to each item. All certification documents must be positive and unqualified, with no disclaimers permitted, and must include specific data elements such as contract number, NSN, lubricant details, and HM&E test results. The contract enforces strict configuration control requiring Engineering Change Proposals (ECPs) for any Class I or II changes affecting form, fit, function, or interface, with detailed impact assessments required on logistics, operational use, and lifecycle costs. Waivers and deviations—classified as Critical, Major, or Minor—must be formally requested and approved by the Contracting Officer before implementation, with all approvals and disapprovals transmitted with the delivered material. Government source inspection by DCMA is mandatory at the vendor’s facility, and subcontracted work must include the same quality requirements, with prior government approval required for inspection at subcontractor sites. Final acceptance is contingent upon submission of certification data via Wide Area WorkFlow (WAWF) to Portsmouth Naval Shipyard prior to shipment, with no material allowed to ship until formal acceptance is received. The delivery schedule mandates 210 days from contract award, with certification data submitted 20 days before each delivery and reviewed for 6 working days before approval. All materials must be mercury-free, and packaging must comply with MIL-STD-2073. Small business subcontracting is required, and the Buy American Act, along with FTA and Balance of Payments Program certifications, applies. The solicitation is a total small business set-aside under DEV 2026-O0037
Navsup Weapon Systems Support Mech

POSTED

1 day ago

DEADLINE

in 23 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

NAICS: 339991
New
DIBBS
SEAL, INTERFACE AIRCThis contract pertains to the procurement of four units of a seal interface for a 25 mm gunport and mount, designated by NSN 1560-01-388-9484 and part number LE261-0122-0005, sourced from SEAL SCIENCE, INC. and RUBBERCRAFT CORPORATION OF CALIFORNIA. The item is classified as a critical application component and must comply with all applicable technical, quality, and packaging requirements outlined in the DLA Master List of Technical and Quality Requirements, with revisions controlled based on the solicitation or award date depending on acquisition size. Mandatory standards include MIL-STD-1916 or ASQ H1331 for sampling with zero non-conformances required unless otherwise specified, and verified attributes must adhere to specific verification levels or AQLs. Packaging must follow DLA requirements RP001 and MIL-STD-129, with hazardous materials conforming to FED-STD-313 and IP025, while non-hazardous items must meet ASTM D3951, though DLA requirements override any conflicting commercial standards. The delivery is FOB origin with a firm fixed price and no variance allowed in quantity, and inspection and acceptance occur at the manufacturer’s facility. The item is not subject to Item Unique Identification as per customer request, though physical marking per RQ017 is required. Cybersecurity compliance mandates a CMMC Level 2 self-assessment, and documentation for source approval must be submitted per RC001. Delivery is due 330 days after award, with all shipments directed to DLA Distribution Warner Robbins, Georgia. The contract is issued under solicitation SPE4A7-26-Q-0894, with a response deadline in August 2026 and a required delivery date of September 25, 2027. The contract specifies detailed handling for packing and labeling and references transportation protocols per DLAD proc notes, with the DLA as the contracting authority and Shenita Tirado as the primary point of contact.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 10 days
View Details
NAICS: 336419
New
DIBBS
COVER, ACCESS, AIRCRAThe contract pertains to the procurement of one access cover for aircraft, identified by NSN 1560-00-811-2903, under solicitation SPE4A7-26-Q-0899, with a response deadline of August 7, 2026, and a delivery requirement of 250 days after award. Technical and quality requirements referenced in this contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition type. The item involves technical data subject to U.S. export control regulations under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons anywhere, including within the United States, and binding U.S. companies and their foreign subsidiaries. Access to this controlled data is restricted to contractors with approved US/Canada Joint Certification Program status, completed DOD training on handling export-controlled technical data, and approved completion of the DLA Export-Controlled Technical Data Questionnaire. The contracting activity is managed by the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV, with Huy Nguyen listed as the primary point of contact, and the performance location remains unspecified but is governed under U.S. federal procurement protocols.
Other Guided Missile and Space Vehicle Parts and Auxiliary Equipment Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332913
New
DIBBS
FITTING, ORIFICE, TIPThe item is a fitting, orifice tip with NSN 1650-00-604-6318, with a quantity of eight units required under purchase request 7016752333, and delivery must be completed within 44 days after order date. The solicitation, identified as SPE4A7-26-Q-0895, was posted on July 28, 2026, with a response deadline of August 4, 2026, and is managed by the Department of Defense’s ASC Supplier Oper AE and AF Division. The technical data associated with this item is subject to export control under either ITAR or EAR, and any disclosure to foreign persons—regardless of location—is prohibited without prior authorization from the Department of State or Commerce. This restriction applies to all entities, including U.S. companies and their foreign subsidiaries, as well as foreign national employees. Access to the controlled data is strictly limited to DLA contractors who hold an approved US/Canada Joint Certification Program certification, have completed mandatory training on handling DOD export-controlled technical data, and have successfully submitted and been approved for the DLA Export-Controlled Technical Data Questionnaire. The point of contact for inquiries is NYA Currie, reachable via email and phone provided.
Plumbing Fixture Fitting and Trim Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
PLUG, MACHINE THREADThe contract pertains to the procurement of 432 units of a machine thread plug with NSN 5365-01-035-4899 under solicitation SPE4A7-26-Q-0906, with a delivery requirement of 160 days after award. Technical data associated with this item is subject to export control under either the International Traffic in Arms Regulations or the Export Administration Regulations, meaning any disclosure to foreign persons, regardless of location, requires prior authorization from the Department of State or Department of Commerce. Compliance with DFARS 252.225-7048 is mandatory, and distribution of controlled data is restricted to contractors who hold an approved US/Canada Joint Certification Program status, have completed mandatory DLA training on handling export-controlled technical data, and have been formally authorized by DLA. The solicitation was posted on July 28, 2026, with responses due by August 7, 2026, and is managed by the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV, with Mykhara Robinson as the primary point of contact.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333995
New
DIBBS
PRODUCTION LOT TESTINGThe contract is for the procurement of 46 piston hydraulic accumulators with NSN 0001S00000062 under solicitation SPE4A7-26-Q-0901, with a delivery requirement of 134 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date depending on acquisition size. The contractor must comply with stringent documentation standards including a Source Approval Request, DLA packaging specifications, and tailored higher-level quality requirements for both manufacturers and non-manufacturers. Inspection and acceptance must occur at origin, and government identification must be removed from non-accepted items. Technical data associated with this item is subject to export control under ITAR or EAR, restricting disclosure to foreign persons regardless of location and requiring prior authorization from the Department of State or Department of Commerce. Only contractors with approved US/Canada Joint Certification Program status, completed DLA export control training, and formal approval from DLA may access this controlled data, as mandated by DFARS 252.225-7048. The contract is managed by the Department of Defense through the ASC Supplier Oper AE and AF Division, with Destiny Stevenson as the primary point of contact, and responses are due by August 11, 2026.
Fluid Power Cylinder and Actuator Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332710
New
DIBBS
BRACKET, FEED TUBEThe item is a BRACKET, FEED TUBE with NSN 5342-01-128-1745, quantity of 32 units, under purchase request 7015852934, with a delivery requirement of 140 days after date of award. The solicitation number is SPE4A7-26-Q-0900, issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, with a response deadline of August 5, 2026, and a posting date of July 28, 2026. Technical data associated with this item is subject to U.S. export control regulations under either ITAR or EAR, restricting its disclosure to foreign persons regardless of location and applying equally to foreign national employees and subsidiaries of U.S. companies. DFARS 252.225-7048 governs the handling of this controlled data. Contractors must hold an approved U.S./Canada Joint Certification Program certification, complete mandatory DLA training on handling export-controlled technical data, and submit the DLA Export-Controlled Technical Data Questionnaire to gain authorized access. Distribution is limited exclusively to DLA contractors who have received formal approval from the DLA controlling authority.
Machine Shops

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334290
New
DIBBS
DIVIDER, POWER, RADIO FRThe contract is for one unit of a radio frequency power divider, part number 823HN718-1, identified by NSN 5895016995693, to be delivered to the USS RONALD REAGAN CVN 76 at FPO AP 96616. Delivery is required within 20 days of contract award, with FOB destination terms, and no variance in quantity is permitted. Inspection and acceptance occur at the delivery point, and packaging must comply with MIL-STD-2073-1E and MIL-STD-129, with no special marking required. The item is classified as a critical application and must adhere to DLA’s packaging requirements, including prohibition of mercury or mercury compounds in preservation and packing. Sampling and quality verification follow MIL-STD-1916 or equivalently approved zero-based plans, with critical attributes assigned a verification level of VII or an AQL of 0.1. The unit of issue is each (EA), and the contract references the DLA Master List of Technical and Quality Requirements for incorporated technical and quality standards identified by R or I numbers. The supplier must use the DLA Vendor Shipping Module for shipment tracking, and transportation instructions reference DLA procedural notes C19 and C20. The original required delivery date is July 24, 2026, with a procurement solicitation issued under SPE4A7-26-T-598A and a response deadline of August 5, 2026.
Other Communications Equipment Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 333612
New
DIBBS
ADAPTER-CAP, CONSTANThe item specified is an ADAPTER-CAP, CONSTANT SPEED DRIVE with NSN 1650-00-286-2229, quantity of one unit, and a delivery deadline of 255 days after contract award. The solicitation is a total small business set-aside under FAR 19.5, issued by the Department of Defense under office designation ASC SUPPLIER OPER AE AND AF DIV, with response submissions due by August 5, 2026. Technical data associated with this item is subject to export control under either ITAR or EAR, prohibiting any disclosure to foreign persons regardless of location and requiring prior authorization from the Department of State or Commerce. Disclosure to foreign national employees or foreign subsidiaries is strictly controlled. Access to this data is restricted to DLA contractors who hold an approved US/Canada Joint Certification Program certification, have completed mandatory DOD export-controlled training and questionnaire, and have received explicit approval from the DLA controlling authority. The contract includes compliance requirements for CMMC Level 2 certification by the third-party assessment organization and physical identification marking of the bare item as specified in RQ005 and RQ017.
Speed Changer, Industrial High-Speed Drive, and Gear Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 333612
New
DIBBS
HOUSING ASSEMBLY, GEARThe contract pertains to the procurement of four Housing Assembly, Gear units with NSN 2915-01-542-4682 under solicitation SPE4A7-26-R-X972, issued by the Department of Defense through the ASC Supplier Oper AE and AF Division. The item is classified as a Critical Application Item, and delivery is required within 240 days after award date with firm fixed pricing and no variance tolerance in quantity. Inspection and acceptance occur at the destination, with FOB origin terms applicable. Packaging must comply with ASTM D3951 and MIL-STD-129, adhering to DLA Packaging Requirements for Procurement, including palletization standards, and all documentation must reflect the correct Unit of Issue and Quantity per Unit Pack as specified. The DLA Master List of Technical and Quality Requirements governs all technical specifications and override any conflicting standards, including labeling and marking requirements. The contract mandates strict compliance with cybersecurity standards requiring a CMMC Level 2 Self-Assessment and includes detailed quality assurance protocols, mandating sampling in accordance with MIL-STD-1916 or ASQ H1331 Table 1, with verification levels of VII, IV, and II assigned to critical, major, and minor attributes respectively, and zero non-conformances required for acceptance unless otherwise stipulated. The manufacturer may choose attribute or variable inspection methods under MIL-STD-1916, and MIL-STD-105/ASQ Z1.4 may be used for sample size determination only. All supplies must be free from government identification if not accepted, and measuring and test equipment must meet specified standards. Item Unique Identification is not required per service customer direction, and DFARS 252.211-7003(c)(1)(i) applies. The contractor must submit Source Approval Requests as outlined in RC001, and all packaging and shipment logistics must conform to DLAD Proc Notes C19 and C20 for transportation routing and first destination handling.
Speed Changer, Industrial High-Speed Drive, and Gear Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332510
New
DIBBS
RIVET, BLINDThe contract is for the procurement of 2 units of RIVET, BLIND with NSN 5320-01-006-2154 under solicitation SPE4A7-26-T-598E, issued on July 28, 2026, with responses due by August 5, 2026. The item is classified as a commercial item and conforms to a military or consensus non-government part standard, allowing hardware manufactured to any prior current revision of the standard to remain acceptable, though all future production must meet the latest revision. No shelf life applies, and item unique identification is not required per DFARS 252.211-7003(c)(1)(i). Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with a zero-defect acceptance criterion unless otherwise stated; attributes are assigned verification levels VII, IV, and II for critical, major, and minor characteristics respectively. Packaging and marking must comply with DLA requirements including removal of government identification from non-accepted supplies and physical identification of bare items. Technical and quality standards referenced by R or I numbers are governed by the DLA Master List, with revisions controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for larger ones. Delivery is required within 10 days after award to Clackamas, Oregon, and inquiries should be directed to Brad Ingram at the Defense Logistics Agency. The solicitation is fully competitive under a federal specification, and covered defense information may apply.
Hardware Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 327110
New
DIBBS
CABINET SECTIONThe contract requires the delivery of ten individual units of cabinet components identified by NSN 5975-12-378-8293, each priced at $1.00, for a total value of $10.00, with a strict delivery requirement of 20 days from the contract award. All items must be shipped FOB destination to the USS FT LAUDERDALE (LPD 28) at FPO AE 09595, with no quantity variance permitted. Inspection and acceptance occur at the destination, and packaging must comply fully with MIL-STD-2073-1E, including specific preservation methods, unit containers, and packaging codes. Marking is mandated to meet MIL-STD-129 with no special marking required, and palletization must follow DLA’s RP001 packaging standards. The shipment must be sent via fastest traceable means using VSM, explicitly prohibiting parcel post, and aligned with DLA procedural notes C19 and C20. Sampling and quality verification adhere to MIL-STD-1916 or ASQ H1331, with zero non-conformances required unless otherwise stipulated, and attributes are to be classified with corresponding verification levels or AQLs. Technical and quality compliance is governed by the DLA Master List of Requirements, referenced by R and I numbers, with revisions controlled by the solicitation or award date. The contract is issued under SPE4A7-26-T-597Z, and the original delivery deadline is July 22, 2026.
Pottery, Ceramics, and Plumbing Fixture Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details