Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

SPACER, RING

Active
SPE4A7-26-T-635GFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of 31 units of a SPACER, RING with NSN 5365-00-068-0254 under solicitation SPE4A7-26-T-635G, issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. Delivery is required within five days of award, with a response deadline of August 17, 2026. The item is subject to multiple stringent technical and quality requirements, including the Defense Logistics Agency’s packaging standards, inspection and acceptance at origin, and mandatory physical marking of the bare item. The supplier must comply with export control regulations under ITAR or EAR, as the technical data associated with this item is classified and cannot be disclosed to foreign persons without prior authorization from the Department of State or Commerce; access is restricted to contractors with approved US/Canada Joint Certification Program status, completion of mandatory DOD export control training, and explicit DLA authorization. Additional requirements include CMMC Level 2 certification for the third-party assessment organization, adherence to the DLA Master List of Technical and Quality Requirements, and specific documentation procedures for source approval. The place of performance is identified as Clearfield, Utah, with a ZIP code of 84016, and Keyanna McNeil-Johnson is the primary point of contact for the solicitation.

General Info

Procure 31 SPACER RING units, deliver in 5 days, comply with ITAR, CMMC Level 2, and DLA quality standards.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

332613 - Spring ManufacturingView NAICS

Place of Performance

CLEARFIELD UTAH 84016, CLEARFIELD, UT, 84016, US

Set-Aside

NONE

Documents

(1)

RFQ SPE4A7-26-T-635G DLA Aviation Aug 2026

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV
View Agency Profile
Office AddressUS
Contacts
Keyanna MCNEIL-JOHNSON
contact@example.gov

Full Description

Show more
SPACER,RING
SPACER<(>,<)> RING
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RD002, COVERED DEFENSE INFORMATION APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RT001: MEASURING AND TEST EQUIPMENT
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 5365-00-068-0254 Quantity: 31 EA Purchase Request: 7017749058QTY: 47 Delivery: 5 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMPRES
Solicitation # SPE7L1-26-T-943K
The contract is for a single helical compression spring identified by NSN 5360-01-248-1585, with a delivery requirement of 10 days after award. The solicitation number is SPE7L1-26-T-943K, issued on August 9, 2026, with responses due by August 20, 2026, under a federal procurement process managed by the Department of Defense’s Land Supply Chain. The item is intended for performance at Fort Bragg, North Carolina, and the procurement falls under NAICS code 332613 for spring manufacturing. Technical and quality requirements are incorporated by reference from the DLA Master List of Technical and Quality Requirements, accessible via the DLA website, with applicable revisions controlled by the solicitation issuance or award date depending on acquisition type. Packaging must comply with DLA packaging standards and any non-accepted supplies must have government identification removed prior to return. The primary point of contact is Kristina Derry, reachable via email and phone provided, and all relevant information is accessible through the DIBBS portal.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMP
Solicitation # SPE7L3-26-T-168Q
The contract is for a single helical compression spring with part number 670184552 and NSN 5360-01-198-8082, to be delivered within 20 days of award. The solicitation number is SPE7L3-26-T-168Q, issued by the Department of Defense under the Land Supplier Opns Vehicle Spt organization, with a response deadline of August 20, 2026. The item is governed by DLA packaging and technical requirements, which are incorporated by reference from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on acquisition size. Strict prohibitions are in place against the intentional addition of mercury or mercury-containing compounds to the spring or its direct contact surfaces, except for specific functional uses such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or NAVSEA-specified reagents. Portable fluorescent lamps or instruments containing mercury must be shock-proof and feature a secondary containment boundary in compliance with NAVSEA 5100-003D. Removal of government identification is required from non-accepted supplies, and the contractor is Roper Whitney Inc of Rockford, IL. All contractual obligations are subject to the terms outlined in the DLA procurement framework, with the point of contact for inquiries being Lee Miller at the provided email and phone number.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMP
Solicitation # SPE7L1-26-T-947G
The contract is for 1,263 helical compression springs with NSN 5360-00-770-4949 under solicitation SPE7L1-26-T-947G, with a deadline for response on August 20, 2026, and delivery required within 18 days of award. The item is classified under NAICS code 332613 and is being procured by the Department of Defense’s Land Supply Chain through the DLA. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must comply with DLA standards, and all supplies must be free of government identification if rejected. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute chemicals must be approved unless explicitly authorized by the specification. Asbestos is not permitted in any components, and alternative materials must be reviewed and approved under Clause L30 and Provision 4 conditions. The place of performance is Phoenix, Arizona, with Chelsea Cunningham listed as the primary point of contact for inquiries.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, TORS
Solicitation # SPE7L1-26-T-946F
This contract specifies the procurement of a helical torsion spring with part number 7521423 and NSN 5360-00-752-1423, under solicitation SPE7L1-26-T-946F. A total of 1,520 units are required to be delivered FOB origin within 102 days, with zero variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including marking per MIL-STD-129 with no special markings. The item is designated as a critical application item and must adhere to technical specifications referenced in the DLA Master List of Technical and Quality Requirements, with sampling governed by MIL-STD-1916 or comparable zero-based methods, assigning verification levels or AQLs based on attribute classification. Mercury and mercury-containing compounds are prohibited except in specified functional components like batteries, fluorescent lamps, and instrument controls, which must include secondary containment as per NAVSEA 5100-003D. The contract enforces full and open competition, and all deliverables must meet the technical drawing revision dated June 11, 2026. Delivery is to Industries of the Blind Inc in Greensboro, NC, with shipping governed by DLA procedural notes, and the required ship date is December 1, 2026, against an original delivery deadline of February 14, 2027.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMP
Solicitation # SPE7L3-26-T-168H
This contract is for the procurement of a single helical compression spring identified by NSN 5360-01-200-0414, with a delivery requirement of 20 days after order. The solicitation number is SPE7L3-26-T-168H, issued by the Department of Defense through the Land Supplier Operations Vehicle Support organization, with a response deadline of August 20, 2026. The contract incorporates all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, accessible via the official DLA website, and the applicable revision is determined by the solicitation issue date or award date depending on the acquisition size. The supplier, Roper Whitney Inc. of Rockford, IL, must ensure no intentional addition of mercury or mercury-containing compounds to the product or its packaging, except for specific permitted uses such as batteries, fluorescent lights, sensors, controls, weapon systems, or chemical reagents specified by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shockproof and equipped with a secondary containment barrier in compliance with NAVSEA 5100-003D. All government identification must be removed from non-accepted supplies, and performance is to be conducted at FPO, ZIP 96632. Primary point of contact is Lee Miller at the provided email and phone number.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, EXTE
Solicitation # SPE7LX-26-U-9361
This contract specifies the procurement of a helical extension spring with NSN 5360-01-507-8261 and part number 1881880 under solicitation SPE7LX-26-U-9361, issued by the Department of Defense’s Strategic Acquisition Program Directorate. The requirement calls for 65 units delivered FOB origin within 104 days with no variance allowed in quantity, and inspection and acceptance occur at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129 for marking and labeling, while palletization adheres to DLA’s RP001 packaging requirements, with all technical and quality standards from the DLA Master List taking precedence over ASTM standards. The unit of issue is each, priced at $65.00 per unit, totaling $4,225, and this is an estimated quantity not guaranteed for full purchase by the IDC. The contract is part of a simplified acquisition and is governed by the DLA Master List of Technical and Quality Requirements in effect on the solicitation issue date, which supersedes any conflicting specifications. All government identification must be removed from non-accepted supplies, and the delivery terms strictly enforce origin point shipment with destination inspection. The solicitation was posted on August 9, 2026, with responses due by August 24, 2026, under NAICS code 332613 for spring manufacturing. Primary point of contact is Theodore Misiolek, and all logistics and packaging details align with DLA’s standardized procedures as outlined in their official documentation and unit of issue reference tables.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332613
New
DIBBS
SPRING, FLAT
Solicitation # SPE7L1-26-T-946D
The contract pertains to the procurement of one flat spring with NSN 5360-01-648-4859 under solicitation SPE7L1-26-T-946D, issued by the Department of Defense’s Land Supply Chain. Delivery is required within 20 days of award, and responses must be submitted by August 20, 2026. The solicitation incorporates technical and quality requirements referenced in the DLA Master List, with applicable revisions controlled by the solicitation issue date. Packaging must comply with DLA standards, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. The item involves technical data subject to export controls under ITAR or EAR, with strict limitations on access and disclosure to unauthorized foreign persons, including foreign nationals employed by U.S. entities. Access to controlled data requires approved JCP certification, completion of designated DLA training, and formal authorization. The place of performance is Fort Sill, Oklahoma, and the primary point of contact is George Mitchell at DLA, reachable via email and phone. The NAICS code is 332613, indicating classification under Other Spring Manufacturing.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMPRES
Solicitation # SPE7L1-26-T-943L
The contract is for the procurement of 10 helical compression springs with NSN 5360-01-439-2296 and part number 3913581906, supplied by Parker Hannifin Corporation. Delivery is required within five days of order placement, FOB origin, with no quantity variance allowed. Inspection and acceptance occur at the destination location, and the springs must be packaged in accordance with ASTM D3951, though any conflicting requirements from the DLA Master List of Technical and Quality Requirements take precedence. All packaging and labeling must comply with MIL-STD-129, and palletization must adhere to DLA’s packaging requirements. Shipment must be sent by the fastest traceable means, excluding parcel post, and delivered to the designated DLA facility in Texarkana, Texas. The unit of issue is each, with a total price of $10.00 per unit. The contract is issued under solicitation SPE7L1-26-T-943L, with a required delivery date of August 6, 2026, and must be fulfilled by a supplier certified to meet federal defense supply standards. Government marking, tracking, and reporting codes are embedded in the shipment instructions for accountability and logistics tracking.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMP
Solicitation # SPE7L1-26-T-944Z
The contract pertains to the procurement of 46 helical compression springs, identified by NSN 5360-00-535-8852 and part number 11319, manufactured by MID-AMERICA AEROTECH, LLC. The item is designated as a critical application item and must comply with stringent technical and quality requirements as defined in the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers incorporated into the contract. Sampling and inspection procedures must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances permitted unless otherwise specified, and attributes are to be classified with predefined verification levels or AQLs. The springs must be marked in accordance with MIL-STD-130N and packaged per MIL-STD-2073-1E with specified preservation methods, wrapping materials, and unit containers, with palletization conforming to DLA packaging standards. Marking must adhere to MIL-STD-129 with no special marking code applied. Delivery is required FOB origin within 27 days, with a need ship date of August 18, 2026, and the final destination is Arizona Industries for the Blind in Phoenix, AZ. Inspection and acceptance occur at the destination, and the quantity permitted has zero variance. The contract is issued under solicitation SPE7L1-26-T-944Z with a response deadline of August 20, 2026, and is managed by the Department of Defense’s Land Supply Chain.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMP
Solicitation # SPE7L1-26-T-945Y
The contract specifies the procurement of 18 helical compression springs with NSN 5360-01-377-9544 under solicitation SPE7L1-26-T-945Y, with a response deadline of August 20, 2026, and a delivery requirement of five days after delivery order issuance. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. Packaging must comply with DLA packaging standards, and all supplies must be free of government identification upon rejection. The use of Class I ozone-depleting chemicals is strictly prohibited, overriding any conflicting specification requirements, and any substitute chemicals must be submitted for approval unless explicitly authorized. Asbestos is forbidden in all components, and any alternative materials must undergo formal approval per Clause L30 and Provision 4 conditions. The contract is managed by the Department of Defense’s Land Supply Chain, with Kristina Derry listed as the primary point of contact, and performance is expected within the United States.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMPRES
Solicitation # SPE7L1-26-T-944H
The contract specifies the procurement of 20 helical compression springs with NSN 5360-00-535-8852 and part number 11319 manufactured by MID-AMERICA AEROTECH, LLC, under solicitation SPE7L1-26-T-944H. The item is classified as a critical application item subject to stringent quality and identification standards, including compliance with MIL-STD-130N for U.S. military property marking. All supplies must adhere to DLA packaging requirements as outlined in RP001 and MIL-STD-2073-1E, with specific packaging methods including dry preservative treatment, GB wrap, and unit containerization as BE OPI, packed in intermediate containers of no more than 25 units, and marked in accordance with MIL-STD-129. Sampling and inspection procedures must follow MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required unless otherwise noted, and critical, major, and minor attributes are to be verified at levels VII, IV, and II respectively. The delivery is set for 165 days after order, FOB origin, with destination as both inspection and acceptance point. The final delivery address is Arizona Industries for the Blind in Phoenix, AZ, with a required ship date of February 2, 2027. The contract enforces a strict zero percent variance on quantity and requires adherence to all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, accessible via the official DLA website.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMP
Solicitation # SPE7L1-26-T-943Z
The contract is for 10 helical compression springs with NSN 5360-01-535-5579 and part number DGMT0005, supplied by DILLON AERO, INC. under solicitation SPE7L1-26-T-943Z, with a required delivery date of August 5, 2026, and a 20-day delivery window from the origin point. The items must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which take precedence over applicable industry standards like ASTM D3951. Packaging must follow MIL-STD-129 and DLA’s packaging guidelines under RP001, including palletization and labeling standards, and must not use parcel post—shipment must occur via the fastest traceable means. The springs are subject to MIL-STD-130N for identification marking and require compliance with Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment. Delivery is FOB origin to the specified military address at Fort Campbell, Kentucky, with no quantity variance permitted. Documentation for source approval must be provided per RC001, and government identification must be removed from non-accepted supplies per RQ011. Covered defense information rules apply under RD002. The unit of issue is each, priced at $10.00 per unit, totaling $100.00, and the contract incorporates all specified DLA requirements without shelf-life constraints.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

NAICS: 336413
New
DIBBS
BLANKET ASSEMBLY
Solicitation # SPE4A7-26-T-634E
This contract is for the procurement of two units of a blanket assembly under solicitation SPE4A7-26-T-634E, with a delivery deadline of 89 days after order. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. Cybersecurity requirements mandate CMMC Level 2 certification through a certified third-party assessment organization. The item is subject to stringent export control regulations under ITAR or EAR, prohibiting unauthorized disclosure of associated technical data to foreign persons anywhere, including foreign nationals in the U.S., and requires compliance with DFARS 252.225-7048. Access to controlled data is restricted to contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory DOD export control training and the DLA questionnaire, and received formal approval from DLA. Inspection and acceptance occur at origin, and non-accepted supplies must have government identification removed. Packaging must conform to DLA standards, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. The place of performance is New Cumberland, Pennsylvania, and the primary point of contact is April Reed of the Department of Defense’s ASC Supplier Oper AE and AF Division.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
BRUSH SEAL, COVER
Solicitation # SPE4A7-26-T-634H
The contract is for 45 purchase groups of BRUSH SEAL, COVER, with each purchase group containing two units, totaling 90 individual items. The item is identified by NSN 1680-01-062-1740 and is subject to strict export control under either ITAR or EAR, meaning any disclosure of associated technical data to foreign persons—regardless of location—requires prior authorization from the Department of State or Commerce. DFARS 252.225-7048 governs handling of this controlled data, and distribution is restricted to DLA contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory DOD export control training, and have been formally approved by DLA to access such information. The solicitation number is SPE4A7-26-T-634H, posted on August 9, 2026, with responses due by August 17, 2026. The contract falls under NAICS code 336413 and is managed by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. Delivery is required 89 days after award, with performance taking place at Robins Air Force Base, Georgia. Primary point of contact is April Reed, reachable via phone or email provided. The contractor must also maintain CMMC Level 2 certification as a C3PAO and comply with physical marking requirements for the item.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332994
New
DIBBS
ROD ASSY
Solicitation # SPE4A7-26-T-632L
The contract concerns the supply of a ROD ASSY item identified by part number 123LM10192-1 and NSN 5342001610529, with a quantity of three units to be delivered FOB origin within 166 days, targeting a delivery date of January 31, 2027. The item is classified as a commercial item and a critical application item, subject to stringent quality and cybersecurity requirements including CMMC Level 2 self-assessment and adherence to the DLA Master List of Technical and Quality Requirements referenced by R and I numbers. Physical identification and bare item marking must follow RQ017 and MIL-STD-129 specifications, with no special marking required. Packaging must comply with MIL-STD-2073-1E and DLA Packaging Requirements, using prescribed methods for preservation, wrapping, and containment as detailed in the QUP and packing code U. Sampling and inspection protocols follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and acceptance occurs at origin with no variance permitted in quantity. The delivery destination is DLA Distribution San Diego at 3581 Cummings Road, Building 3581, San Diego, CA 92136-3581, for both parcel post and freight shipping. The unit price is $3.00, resulting in a total contract value of $9.00. The item has no shelf life restriction. The solicitation number SPE4A7-26-T-632L was issued on August 9, 2026, with responses due by August 17, 2026. The NAICS code is 332994, and the contracting office is the ASC Supplier Oper AE and AF Division under the Department of Defense. The point of contact is Jessica Gentry, reachable via phone and email. All requirements are governed by DoD standards, and transportation logistics must align with DLAD Proc Notes C19 and C20. The item must be delivered by manufacturers or non-manufacturers who meet tailored higher-level quality requirements and comply with inspection and acceptance provisions at the point of origin.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
MMR R-T SLED, AIRCRA
Solicitation # SPE4A7-26-T-635Q
The contract pertains to the procurement of seven units of MMR R-T SLED for aircraft, identified by NSN 1680-01-522-5949, under solicitation SPE4A7-26-T-635Q with a response deadline of August 17, 2026, and a delivery requirement of 20 days after delivery order issuance. Technical and quality requirements referenced through R and I numbers are governed by the DLA Master List of Technical and Quality Requirements, with compliance determined by the revision in effect on the solicitation issue date or award date. The item is subject to Cybersecurity Maturity Model Certification (CMMC) Level 2 requirements, necessitating the contractor to be a certified third-party assessment organization. All supplies must comply with DLA packaging standards and inspection procedures at origin, and any non-accepted items must have government identification removed prior to disposal. The technical data associated with this item is controlled under either ITAR or EAR, restricting access and export to authorized parties only. Contractors must hold a valid US/Canada Joint Certification Program certification, complete required DOD export control training, and receive formal approval from DLA to handle such data. Foreign nationals, including those employed by U.S. companies or subsidiaries, are included under these restrictions. Distribution is limited to contractors cleared by DLA and compliant with DFARS 252.225-7048. The contract is administered by the Department of Defense under the ASC SUPPLIER OPER AE AND AF DIV, with primary point of contact April Reed.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
WIPER PLATE ASSY
Solicitation # SPE4A7-26-T-633A
The contract is for the procurement of three Wiper Plate Assemblies with NSN 1680-01-562-1657 under solicitation SPE4A7-26-T-633A, responding to purchase request 7017011444. The items are subject to stringent technical and quality requirements referenced from the DLA Master List, with compliance tied to the version of the master in effect on the solicitation issue date or award date, depending on acquisition size. Packaging must adhere to DLA standards, and physical identification of the bare item is mandated. Inspection and acceptance occur at the manufacturer’s origin, and government identification must be removed from non-accepted supplies. Item Unique Identification is not required per the Service customer’s request, with DFARS 252.211-7003(c)(1)(i) governing this exemption. Technical data associated with the item is subject to export control under either ITAR or EAR, prohibiting unauthorized disclosure to foreign persons anywhere, including U.S.-based subsidiaries and employees. Access to this controlled data is restricted to contractors certified under the US/Canada Joint Certification Program, who have completed mandated DLA training and questionnaire and received formal approval. The delivery deadline is 103 days after order, with performance location in Tracy, California, 95304-5000. The solicitation opens on August 9, 2026, and closes on August 17, 2026, with Rahsaan Deloney designated as the primary point of contact.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332994
New
DIBBS
BRACKET, FUELING PRO
Solicitation # SPE4A7-26-T-631P
The contract pertains to the procurement of a BRACKET, FUELING PRO with NSN 5342-00-443-5628, for a quantity of 10 units, under solicitation SPE4A7-26-T-631P, with a delivery requirement of 166 days after award. The item must comply with a broad set of technical, quality, and regulatory requirements including CMMC Level 2 certification for the supplier as a third-party assessment organization, adherence to ISO 9001:2015 quality standards, and strict compliance with DLA packaging and inspection protocols. All supplies must be free from intentional addition of mercury or mercury-containing compounds, with specific exceptions for functional uses in batteries, lighting, instruments, sensors, weapon systems, or chemical reagents authorized by NAVSEA, and any such permitted items must include shockproof construction and a secondary containment barrier as mandated by NAVSEA 5100-003D. Technical data associated with this item is subject to export controls under either ITAR or EAR, prohibiting unauthorized disclosure to foreign persons anywhere, including foreign nationals employed by U.S. entities. Access to this controlled data is restricted to contractors who hold an approved US/Canada Joint Certification Program status, have completed required DOD training on export-controlled data handling, and have been formally authorized by DLA. The contract incorporates all relevant requirements from the DLA Master List of Technical and Quality Requirements referenced by R or I numbers. The point of contact for the solicitation is Jessica Gentry of the Department of Defense, and the place of performance is designated as New Cumberland, PA, with the solicitation issued on August 9, 2026, and responses due by August 17, 2026.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335999
New
DIBBS
TAPE, INSULATION, ELE
Solicitation # SPE4A7-26-T-635J
This contract pertains to the procurement of electrical insulation tape designated as a commercial item with a 12-month shelf life, extendable under RS055 requirements. The item is classified as a critical application product and must comply with Technical Data Package Revision B, Gen 3, in accordance with CID A-A-59474D Revision D dated 01/23/2024, with the part number AA59474 TY1 CL4 1W and NSN 5970010124280. All packaging, preservation, and marking must adhere strictly to MIL-STD-2073-1E and MIL-STD-129, including special shelf life labeling code 33, and prohibit any mercury or mercury compounds in preservation materials. Packaging must follow DLA’s RP001 requirements, with units delivered in 36-yard rolls, palletized appropriately, and marked for government use with DNO005 as the freight forwarder and DNOX00 as the delivery destination in Kjeller, Norway. The item is supplied in a unit of issue of RO (roll), with a total quantity of two rolls, and delivery is required FOB origin within five days of award, with zero variance permitted in quantity. Inspection and acceptance occur at origin, and the contract references the DLA Master List of Technical and Quality Requirements for all technical and quality specifications. The solicitation number is SPE4A7-26-T-635J, with a required delivery date of August 12, 2026, and is managed by the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV, with James Sinks as the point of contact.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
FITTING, ORIFICE, TIP
Solicitation # SPE4A7-26-T-634B
The item is a fitting, orifice tip with NSN 1650-00-604-6318, with a quantity of eight units required under purchase request 7016752333. Delivery is due within 82 days after award. The solicitation number is SPE4A7-26-T-634B, posted on August 9, 2026, with responses due by August 17, 2026. This procurement is managed by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, with performance taking place in New Cumberland, Pennsylvania, 17070-5002. Primary point of contact is nya.currie@dla.mil, with phone number 804-279-6982. The item is classified under NAICS code 336413 and is subject to strict export controls under ITAR or EAR, meaning any technical data associated with it cannot be disclosed to foreign persons, including those within the United States, without prior written authorization from the Department of State or Department of Commerce. DFARS 252.225-7048 governs handling of this controlled data, and only DLA contractors with an approved US/Canada Joint Certification Program certification, who have completed required training and questionnaire, and received explicit DLA approval, may access the technical information.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
SEAL ASSEMBLY, CARTR
Solicitation # SPE4A7-26-T-632K
The contract pertains to the procurement of a seal assembly for a cartridge, identified by NSN 1650-00-589-1257 and part number 03211257, with a quantity of 58 units to be delivered FOB origin within 383 days. The item is classified as a critical application component, and no unit identification marking is required per the service customer’s request, though packaging must comply fully with MIL-STD-2073-1E and marking requirements under MIL-STD-129 without special codes. The contract incorporates technical and quality standards referenced from the DLA Master List, including packaging, demilitarization, cybersecurity certification at CMMC Level 2, and configuration change management. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero nonconformances required for acceptance unless otherwise specified, and attributes are assigned verification levels or AQLs based on criticality. Mercury and its compounds are strictly prohibited in the product except in defined exceptions such as batteries and sensors, with additional containment requirements for portable devices per NAVSEA 5100-003D. A separate first article test line item is included with a quantity of one unit, signaling that the contractor must conduct and submit a test sample as required by FAR 52.209-3; this line carries no separate charge unless otherwise stipulated, and its award is void if waived. All deliveries must be shipped to DLA Distribution San Diego, and the contractor is required to satisfy source approval documentation, inspection at origin, and adherence to tailored quality requirements for both manufacturers and non-manufacturers. The contract does not specify a shelf life, and pricing is fixed at $58.00 per unit for the main line item with no variance allowed in quantity.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334290
New
DIBBS
INSTALLATION KIT, ELECT
Solicitation # SPE4A7-26-T-630Z
The contract pertains to the procurement of one Installation Kit, Electronic Equipment with NSN 5895-01-677-7173 and part number 02-2856383-1, to be delivered in a single unit within ten days of contract award, with delivery terms set at FOB origin. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which take precedence over any other standards including ASTM D3951, and must be strictly followed. Packaging and marking must comply with MIL-STD-129 and DLA Packaging Requirements, while palletization adheres to RP001 specifications. Sampling for quality verification follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and critical, major, and minor attributes are assigned verification levels VII, IV, and II respectively. The item must be physically marked in accordance with RQ017, and government identification must be removed from non-accepted supplies as per RQ011. Inspection and acceptance occur at the destination, with the delivery point being US Army SSA Powidz AB, Poland, and the freight shipping address matching the delivery location. The contract is governed under solicitation SPE4A7-26-T-630Z, with a required delivery date of August 3, 2026, and the unit of issue is each, with no variance permitted in quantity. Compliance with DLA procedures for transportation, marking, and documentation is mandatory, and the contract includes specific government-use identification codes and contact information for procurement inquiries.
Other Communications Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
SPACER, RING
Solicitation # SPE4A7-26-T-635M
The item specified is a spacer ring with NSN 5365-00-340-5948, quantity 23 units, under purchase request 7016337117, with a delivery requirement of 54 days ADO. This item is associated with technical data subject to export control under either ITAR or EAR, meaning any disclosure or transfer of such data to foreign persons, regardless of location, requires prior authorization from the Department of State or Department of Commerce. The data is governed by DFARS 252.225-7048, and access is restricted to DLA contractors who hold an approved US/Canada Joint Certification Program certification, have completed required training on handling DoD export-controlled technical data, and have been formally approved by the DLA controlling authority. The solicitation number is SPE4A7-26-T-635M, posted on August 9, 2026, with a response deadline of August 17, 2026. The contracting activity is under the Department of Defense, specifically the ASC SUPPLIER OPER AE AND AF DIV, with performance located in New Cumberland, Pennsylvania, 17070-5002. Primary point of contact is Jamiah Sutton, reachable via email and phone provided.
Hardware Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
SUPPORT, STRUCTURAL
Solicitation # SPE4A7-26-T-631G
The contract pertains to the procurement of five units of a support, structural item identified by NSN 1560-01-544-2830 under solicitation SPE4A7-26-T-631G, with a delivery deadline 124 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, with applicability determined by the type of acquisition and relevant dates. Sampling must conform to MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based plan, with specified attributes assigned strict verification levels or AQLs, and unspecified attributes treated as major unless otherwise defined. Zero non-conformances are required in sampling unless the contract states otherwise. Configuration changes require formal engineering change proposals and variance requests, and source approval documentation must meet specified standards. Packaging must comply with DLA requirements, and government identification must be removed from non-accepted supplies. Measuring and test equipment must be maintained and calibrated per applicable standards. The item involves components listed on Qualified Products or Manufacturers Lists, requiring compliance with procurement note H02. All special processes must be performed by NADCAP-approved organizations, as indicated on drawing 20145214. Technical data associated with this item is subject to U.S. export controls under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons, including foreign nationals within the U.S., and applies equally to U.S. entities and their overseas subsidiaries. DFARS 252.225-7048 governs this restriction. Access to controlled data is limited to contractors certified under the US/Canada Joint Certification Program, who have completed mandatory DLA training and questionnaire. Covering defense information is applicable, and non-tailored quality requirements based on SAE AS9100 apply to both manufacturers and non-manufacturers. The contract is issued by the Department of Defense through the ASC Supplier Oper AE and AF Division, with performance at Tinker AFB, 73145-8000, and primary point of contact is Rekisha Burton.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details