Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

SPACER, RING

Active
SPE4A7-26-T-615DFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract specifies the procurement of a SPACER, RING with NSN 5365-01-483-8650, quantity of nine units, under solicitation SPE4A7-26-T-615D. The item must be delivered FOB origin within 171 days, with zero variance allowed in quantity and inspection and acceptance occurring at the destination. Packaging and marking must fully comply with MIL-STD-2073-1E and MIL-STD-129, using preservation method 33, dry condition, and GB wrap material, with no special marking required. The delivery address is the DLA Distribution facility in New Cumberland, PA. Sampling for quality assurance follows MIL-STD-1916 or ASQ H1331, with verification levels of VII, IV, and II for critical, major, and minor attributes respectively, and zero non-conformances required unless otherwise stated. Mercury or mercury-containing compounds are strictly prohibited in the product, preservation, packaging, and marking, except for functional uses in batteries, lighting, sensors, weapon systems, or chemically specified reagents, and portable items containing mercury must have shockproof construction and a secondary containment. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with revision control tied to the solicitation or award date depending on acquisition size. The unit of issue is each (EA), and palletization adheres to DLA packaging standards as outlined in RP001.

General Info

Procure nine SPACER RINGs under NSN 5365-01-483-8650, FOB origin, delivery to New Cumberland, PA, zero variance, strict MIL-STD compliance, no mercury except limited exceptions.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

332613 - Spring ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

SPE4A7-26-T-615D.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV
View Agency Profile
Office AddressUS
Contacts
Lexus Henry
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SPACER,RING
SPACER, RING
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
VACCO INDUSTRIES 99517 P/N V1E10502 ITEM 22
VACCO INDUSTRIES 99517 P/N V2D12097-1
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE4A7-26-T-615D
SECTION B
PR: 7017740379 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017740379 0001 EA 9.000
NSN/MATERIAL:5365014838650
DELIVERY (IN DAYS):0171
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:33 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:GB CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:BV OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
IP056: MERCURY OR MERCURY COMPOUNDS ARE PROHIBITED IN PRESERVATION,
PACKAGING, PACKING AND MARKING.
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:01/31/2027 Original Required Delivery Date:05/16/2027
SPE4A7-26-T-615D
SECTION B
PR: 7017740379 PRLI: 0001 CONT’D
SPE4A7-26-T-615D NSN/Part Number: 5365-01-483-8650 Quantity: 9 EA Purchase Request: 7017740379QTY: 9 Delivery: 171 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMP
Solicitation # SPE7L1-26-T-916A
This contract specifies the procurement of a helical compression spring identified by NSN 5360-01-026-1107 and part number TDP Rev A Gen 1 IAW MIL-STD-1330E, with a requirement for 17 units to be delivered within 154 days. The spring is designated as a critical application item requiring government engineering source approval and must comply with stringent technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, including specific packaging, cleaning, and marking protocols. It mandates oxygen cleaning and packaging in accordance with MIL-STD-2073-1E and MIL-STD-129, with each unit container labeled with an O2 cleaning certificate and marked with “SPECIAL CLEAN O2-N2.” The item is subject to a zero variance in quantity and is to be delivered FOB origin to Industries of the Blind Inc in Greensboro, NC, with inspection and acceptance occurring at destination. The contract explicitly prohibits the use of ozone-depleting chemicals and any intentional addition of mercury or mercury-containing compounds, except for limited functional applications authorized by NAVSEA, such as in batteries or sensors, with additional containment requirements for portable items. It enforces configuration change management through Engineering Change Proposals and requires suppliers to comply with Qualified Products Lists or Qualified Manufacturers Lists where applicable. Documentation for source approval, removal of government identification from non-accepted supplies, and covered defense information protocols are also binding. The item is classified as a restricted source, and the supplier must adhere to the DLA Packaging Requirements and Transportation Procedures noted in DLAD Proc Notes C19 and C20. The contract was issued under solicitation SPE7L1-26-T-916A, with a response deadline of August 17, 2026, and a required shipment date of January 19, 2027, under a fixed unit price of $17.00 per unit.
LAND SUPPLY CHAIN

POSTED

about 16 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332613
New
DIBBS
SPRING, FLAT
Solicitation # SPE4A5-26-T-322W
The contract is for the procurement of 77 flat springs identified by NSN 5360-01-323-4534, classified as a commercial off the shelf item with adequate catalog data available. The procurement is part of a solicitation issued under SPE4A5-26-T-322W, with a response deadline of August 12, 2026, and an anticipated delivery schedule of 171 days after award. The item requires compliance with Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment and physical identification or bare item marking as specified in the requirements. The contracting activity is managed by the ASC Supplier Oper OEM Division under the Department of Defense, with a place of performance in Phoenix, Arizona, and a primary point of contact named Brandy Coward, reachable via email and phone provided. The solicitation, posted on August 4, 2026, targets vendors under NAICS code 332613 and is issued through the DILS BSM system for federal procurement.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMP
Solicitation # SPE4A5-26-T-326W
This contract specifies the procurement of a helical compression spring with adjustable stop, identified by NSN 5360-01-505-9942 and part number 7410-558355 manufactured by Parker-Hannifin Corporation. The item is classified as a critical application component and must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which supersede any other standards unless explicitly overridden. The contract mandates strict adherence to MIL-STD-1916 or ASQ H1331 for sampling, with zero non-conformances required unless otherwise specified, and assigns verification levels of VII, IV, and II to critical, major, and minor attributes respectively. All packaging must conform to ASTM D3951 while strictly following MIL-STD-129 for marking and labeling, and palletization must meet DLA Packaging Requirements for Procurement. The delivery is set for 171 days after award, with FOB origin terms and inspection and acceptance both occurring at the destination. The quantity of 46 units is fixed with zero variance allowed, and the unit of issue is each. Packaging must reflect the specified Quantity per Unit Pack and include proper government identification removal as required for non-accepted items. The final delivery address is Arizona Industries for the Blind in Phoenix, AZ, with transportation governed by DLAD Proc Notes C19 and C20. The original required delivery date is October 21, 2027, with a needed ship date of January 31, 2027, under solicitation SPE4A5-26-T-326W, issued by the Department of Defense’s ASC Supplier Oper OEM Division. All documentation, including source approval and measurement equipment compliance, must align with referenced DLA requirements.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, EXTE
Solicitation # SPE7L1-26-T-915Z
This contract pertains to the procurement of 46 helical extension springs, identified by NSN 5360-00-416-9917 and part number 2-73309-1 from The Precision Coil Spring Company, under solicitation SPE7L1-26-T-915Z. The item is classified as a critical application component, and all technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined based on the solicitation or award date depending on acquisition size. Delivery is required within 154 days, with shipment FOB origin and inspection and acceptance occurring at the destination. Packaging must comply with MIL-STD-2073-1E, including specific methods for preservation, wrapping, and containment, and marking must adhere to MIL-STD-129 with no special markings required. The delivery address is the Industries of the Blind Inc. in Greensboro, NC, and the need ship date is January 19, 2027, with the original required delivery date set for April 13, 2027. The contract strictly prohibits the intentional addition of mercury or mercury-containing compounds to the supplied hardware, except for specified functional uses such as batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, and chemical reagents authorized by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shockproof and feature a secondary containment barrier, in accordance with NAVSEA 5100-003D. Documentation requirements for source approval are governed by RC001, and the removal of government identification from non-accepted supplies must follow RQ011. Covered defense information may apply under RD003, and packaging must meet DLA standards. The unit of issue is each (EA), with a total contract value of $2,116 at $46 per unit. All transportation logistics and freight shipping are subject to DLAD procedural notes C19 and C20. The contracting office is part of the Department of Defense’s Land Supply Chain, with Robert Warne as the primary point of contact.
LAND SUPPLY CHAIN

POSTED

about 16 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332613
New
DIBBS
SPRING, REGULATOR
Solicitation # SPE4A5-26-T-330L
The contract pertains to the procurement of a SPRING, REGULATOR identified by NSN 5360-00-701-7743, with a quantity of 46 units, under solicitation SPE4A5-26-T-330L. The item is classified as a commercial item and must comply with the DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951. Packaging and marking must adhere to MIL-STD-129 and DLA Packaging Requirements, with palletization following RP001 guidelines. Inspection and acceptance occur at the destination, with no variance permitted in quantity. Sampling protocols require adherence to MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances acceptable unless otherwise stated, and attribute classification follows strict verification levels or AQLs. Unit identification and tracking are not required per the service customer’s request. The item must be delivered FOB origin by January 31, 2027, with an original required delivery date of December 20, 2026, and shipped to Arizona Industries for the Blind in Phoenix, AZ. The contract enforces compliance with all applicable DLA technical, quality, and packaging directives, including the removal of government identification from non-accepted supplies and proper measurement and test equipment usage.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332613
New
DIBBS
RETAINER, PIN ASSY
Solicitation # SPE4A5-26-T-327W
The contract pertains to the procurement of 32 units of a Retainer, Pin Assembly identified by NSN 5360016078041 and part number 70209-27000-123 from Sikorsky Aircraft Corporation, with a purchase request number 7017739932. Delivery is required FOB origin within 171 days, with a final delivery deadline of December 25, 2027, and a need ship date of January 31, 2027. The item is classified as a critical application item, and while unique identification is not mandated, the contractor must comply with all applicable DLA Master List of Technical and Quality Requirements referenced by R or I numbers, which supersede other standards like ASTM D3951. Packaging must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements, with palletization following specified guidelines and all markings and labels properly applied. Supply chain traceability documentation must be retained by the contractor in accordance with DLAD Procurement Note C03, and configuration changes require formal Engineering Change Proposal or variance requests. The acceptance inspection occurs at the destination, with zero tolerance for quantity variance, and sampling follows Sikorsky’s alternate statistical plan QAP 1201, which must meet or exceed ASQ H1331 or MIL-STD-1916 standards. A Certificate of Conformance is authorized unless overridden by a Quality Assurance Letter of Instruction. Cybersecurity Maturity Model Certification Level 2 self-assessment is required, and the contract incorporates covered defense information protocols. All packaging and labeling must comply with applicable military and DLA standards, and the delivery destination is Arizona Industries for the Blind in Phoenix, AZ. The contract is issued under SPE4A5-26-T-327W with the unit of issue being each (EA), and all terms are governed by FAR and DFARS clauses, including the application of DFARS 252.211-7003(c)(1)(i) for Item Unique Identification exemption as specified by the Service customer.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332613
New
DIBBS
SEAT, HELICAL COMPRE
Solicitation # SPE7M0-26-T-7266
The contract pertains to the procurement of a helical compressor seat, identified by NSN 5340013015248 and part number 116146-1, with a quantity of 47 units at a unit price of $47.00, resulting in a total price of $2,209.00. Delivery is required within 105 days from the contract date, shipped FOB origin with no variance allowed in quantity, and inspection and acceptance occur at the destination. The item is classified as a critical application item, and all packaging must comply with DLA’s Master List of Technical and Quality Requirements, which supersede ASTM D3951; if non-hazardous, packaging must follow MIL-STD-129 for labeling and marking, with palletization adhering to DLA packaging standards. Hazardous material must be packaged per Fed-Std-313 and TQ requirement IP025. The delivery address is DLA Distribution Warner Robins at Robins Air Force Base, Georgia, and the required ship date is August 18, 2026, with an original delivery deadline of December 1, 2026. Transportation instructions are governed by DLAD PROC NOTES C19 and C20. The solicitation number is SPE7M0-26-T-7266, issued by the Department of Defense’s Maritime Supply Chain ESOc Buys, with a response deadline of August 7, 2026, and the primary point of contact is Shannon Irwin.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 16 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332613
New
DIBBS
SEAT, HELICAL COMPRE
Solicitation # SPE7M0-26-T-004Z
The contract pertains to the procurement of 49 units of a helical compressor seat, identified by NSN 5340-01-301-5248 and part number 116146-1, under solicitation SPE7M0-26-T-004Z. The item is classified as a critical application component and must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951. Packaging must adhere strictly to DLA’s RP001 guidelines and MIL-STD-129 for marking and labeling, and palletization must follow DLA packaging protocols. If the item is hazardous per FED-STD-313, it must be packaged in accordance with TQ requirement IP025; otherwise, commercial packaging consistent with ASTM D3951 is acceptable. The unit of issue is each, with a fixed quantity of 49 units and zero variance allowed. Delivery is FOB origin with inspection and acceptance occurring at the destination, and the required delivery date is 104 days from the contract award, with an original target of July 6, 2026. The delivery address is DLA Distribution Warner Robins at Robins Air Force Base, Georgia, with a required ship date of March 17, 2026. Transportation procedures must follow DLAD Proc Notes C19 and C20. The contract falls under NAICS code 332613 and is issued by the Department of Defense through the Maritime Supply Chain ESOc Buys office, with Shannon Irwin as the primary point of contact.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 16 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMP
Solicitation # SPE4A5-26-T-325L
This contract is for the procurement of 13 helical compression springs identified by NSN 5360-01-593-2244 and part number 767027 from Hamilton Sundstrand Corporation, classified as a commercial item. The item is designated as a critical application component and must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue date or award date depending on acquisition type. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero nonconformances required unless otherwise stated, and unspecified attributes are treated as major. Acceptance occurs at destination under FOB origin terms with no quantity variance allowed. Packaging must adhere to ASTM D3951, with mandatory labeling and marking per MIL-STD-129 and palletization per DLA packaging standards; DLA requirements supersede all other packaging guidelines. The item is not subject to Item Unique Identification per the service customer's request, and government identification must be removed from non-accepted supplies. The delivery deadline is 171 days from contract award with a required ship date of January 31, 2027, and the final delivery destination is Industries of the Blind Inc in Greensboro, NC. The contract is issued under solicitation SPE4A5-26-T-325L, with a response deadline of August 12, 2026, and falls under NAICS code 332613 for spring manufacturing.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332613
New
DIBBS
Precision Machining of Rigid Connecting LinksThe contract calls for the precision CNC machining and finishing of ten rigid connecting links in strict accordance with military drawings and specifications, ensuring exact dimensional accuracy and mechanical integrity. All work must comply with the aerospace material specification AMS-QQ-S-763, which governs the quality, surface finish, material properties, and inspection standards for critical metal components. Quality assurance protocols are embedded throughout the manufacturing process to guarantee full compliance and traceability, with documentation required to confirm adherence to all technical and regulatory requirements. This subcontract is designated as a Total Small Business Set-Aside under the SBA program, meaning only small businesses are eligible to bid, aligned with FAR 19.5. The North American Industry Classification System code 332613 identifies the work as other fabricated metal product manufacturing, emphasizing the specialized nature of the machining task. The solicitation was posted on August 3, 2026, with responses due by August 18, 2026, and is managed by the Strategic Acquisition Program Directorate within the Department of Defense. Performance is expected to meet federal defense standards, with no specific location designated for delivery, placing responsibility on the contractor to ensure timely and compliant fulfillment.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

1 day ago

DEADLINE

in 13 days
View Details
NAICS: 332613
New
DIBBS
Helical Compression Spring Manufacturing & SupplyThe contract calls for the manufacture and supply of six helical compression springs meeting military specifications, with full compliance required in materials, dimensions, performance, and testing standards. The supplier must provide compliant packaging and labeling consistent with defense logistics requirements, ensuring the springs are properly protected and identified for handling and inventory purposes. Delivery is to be made to Greensboro, North Carolina, with the final destination zip code 27409, and all aspects of the fulfillment must adhere to the timelines and quality controls established by the Department of Defense. The solicitation is classified as a subcontract under NAICS code 332613, indicating specialized manufacturing of spring and wire product components, and responses must be submitted by August 14, 2026, with the opportunity posted on August 3, 2026. The contracting entity is the Land Supply Chain under the Department of Defense, and the procurement is administered through the DIBBS system.
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 332613
New
DIBBS
Helical Compression Spring ManufacturingThe contract calls for the manufacture of six helical compression springs in strict compliance with military specifications, encompassing all phases of production from material sourcing and heat treatment to final finishing and rigorous testing. Each spring must meet defined technical and performance criteria, and all work requires prior approval from the government engineering source to ensure conformance with applicable standards. The effort is classified as a subcontract under a Total Small Business Set-Aside, restricted to small businesses as defined by the SBA, and falls under NAICS code 332613 for spring manufacturing. The place of performance is designated as Phoenix, Arizona, with a zip code of 85043, and the contracting activity is managed by the Fluid Handling Division under the Department of Defense. The solicitation was posted on August 3, 2026, with responses due by August 14, 2026.
FLUID HANDLING DIVISION

POSTED

1 day ago

DEADLINE

in 9 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

NAICS: 484121
New
DIBBS
Transportation and FOB Destination Delivery Services
General Freight Trucking, Long-Distance, Truckload

POSTED

about 16 hours ago

DEADLINE

in 6 days
View Details
NAICS: 518210
New
DIBBS
Supply Chain Traceability and Documentation Management
Computing Infrastructure Providers, Data Processing, Web Hosting, and Related Services

POSTED

about 16 hours ago

DEADLINE

in 6 days
View Details
NAICS: 323111
New
DIBBS
Defense Logistics Packaging and Labeling Services
Commercial Printing (except Screen and Books)

POSTED

about 16 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332722
New
DIBBS
Precision Machining of Defense-Grade Machine Screws
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 6 days
View Details
NAICS: 493130
New
DIBBS
Warehousing and Storage of Finished Harness InventoryThe contract entails the secure, climate-controlled warehousing and inventory management of finished oxygen cylinder carrying harnesses, ensuring all items are stored under strict environmental controls to maintain product integrity until authorized government shipment. Full traceability of inventory is required at every stage, with comprehensive documentation and audit-ready systems in place to support governmental compliance and accountability. The storage facility must support accurate real-time tracking, inventory reconciliation, and controlled access protocols to prevent loss, damage, or unauthorized handling. This is a total small business set-aside subcontract classified under NAICS code 493130, designated for businesses certified under the SBA program, and issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. The solicitation was posted on August 4, 2026, with responses due by September 3, 2026. While specific performance location details are not provided, the contractor is expected to comply with all federal contract requirements including security standards, supply chain integrity, and timely delivery readiness for government distribution. All operations must align with Department of Defense logistics protocols and maintain unwavering readiness for inspection and audit.
Farm Product Warehousing and Storage

POSTED

about 16 hours ago

DEADLINE

in 29 days
View Details
NAICS: 484220
New
DIBBS
Logistics and Transportation of Finished HarnessesThe contract entails the transportation and delivery of finished oxygen cylinder carrying harnesses from the manufacturing site to designated government locations, requiring full compliance with Department of Defense shipping standards. All logistics operations must adhere to stringent military transportation protocols to ensure the safe and timely movement of these critical medical equipment components. The work is classified as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the Small Business Administration are eligible to bid, and the North American Industry Classification System code 484220 specifically identifies this as a heavy and tractor-trailer trucking service. The solicitation was posted on August 4, 2026, with responses due by September 3, 2026, and the overseeing agency is the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. Performance is expected to occur at unspecified government destinations, and all shipments must meet DoD requirements for handling, tracking, and documentation.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 16 hours ago

DEADLINE

in 29 days
View Details
NAICS: 423220
New
DIBBS
Wholesale Supply of Tactical Harness Hardware and ComponentsThe contract solicits the wholesale supply of certified buckles, fasteners, and other hardware components critical to the assembly of oxygen cylinder carrying harnesses, requiring full traceability and documented compliance with military-grade standards. All items must meet precise technical specifications to ensure reliability and safety in tactical and emergency medical applications, with rigorous quality control processes enforced throughout production and delivery. The award will be made under a Total Small Business Set-Aside, restricted exclusively to small businesses as defined by the SBA, and is classified under NAICS code 423220 for merchant wholesalers of hardware and plumbing and heating equipment. The opportunity is managed by the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV and is issued as a subcontract, indicating it supports a larger procurement program. Responses are due by September 3, 2026, with the solicitation posted on August 4, 2026. Performance locations are not specified, suggesting the components may be delivered to multiple DoD sites or integrated into broader logistics networks. All suppliers must provide complete documentation to ensure end-to-end traceability of materials and manufacturing processes, enabling compliance with defense supply chain security protocols and regulatory requirements.
Home Furnishing Merchant Wholesalers

POSTED

about 16 hours ago

DEADLINE

in 29 days
View Details
NAICS: 332996
New
DIBBS
Metal Buckles and Hardware Supply for Tactical HarnessesThe contract seeks the manufacture and supply of corrosion-resistant, high-strength metal buckles and plated hardware components designed for use in life-support carrying harnesses, with all items required to meet rigorous military specifications. These components are critical to the integrity and reliability of tactical harness systems, demanding precision engineering and materials capable of withstanding extreme environmental and operational stresses. The procurement is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the Small Business Administration are eligible to bid, reinforcing the Department of Defense’s commitment to supporting small business participation in defense supply chains. The solicitation, identified under NAICS code 332996 for Other Fabricated Metal Product Manufacturing, was posted on August 4, 2026, with a response deadline of September 3, 2026. It is managed by the ASC SUPPLIER OPER AE AND AF DIV of the Department of Defense, and performance will occur at an unspecified location. All submissions must align with the technical, quality, and delivery requirements inherent to military-grade life-support equipment, and bidders are expected to demonstrate capable production infrastructure, compliance with defense standards, and a clear pathway to consistent, on-time delivery. Interested parties must access the full solicitation through the provided DIBBS link to understand full technical specifications and submission protocols.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 29 days
View Details
NAICS: 315990
New
DIBBS
Supply of Raw Materials and Components for Harness AssemblyThe contract entails the supply of military-grade webbing, straps, padding, and thread specifically engineered for the assembly of oxygen cylinder carrying harnesses, with stringent requirements for full traceability and adherence to defense specifications. All materials must meet exacting performance and durability standards required for mission-critical defense applications, ensuring reliability under extreme operational conditions. The subcontract is issued as a total small business set-aside under the SBA program, reserved exclusively for small businesses certified to fulfill federal contracting obligations under FAR 19.5, with the NAICS code 315990 classifying the work within the other textile product mills category. Responses are due by September 3, 2026, with the solicitation posted on August 4, 2026, under the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV. The performance location is not specified beyond agency oversight, and the contract is managed through the DLA Dibbs system with the solicitation number SPE4A726R0710. Bidders must demonstrate capability to deliver compliant materials with documented chain-of-custody and quality control processes aligned with defense supply chain integrity requirements. Successful vendors will support logistics and life-safety systems essential to military operations, emphasizing quality, compliance, and timely delivery without deviation from technical specifications.
Apparel Accessories and Other Apparel Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 29 days
View Details
NAICS: 339920
New
DIBBS
Manufacturing of Oxygen Cylinder Carrying HarnessesThe contract encompasses the manufacture, quality assurance, packaging, and delivery of Oxygen Cylinder Carrying Harnesses identified by National Stock Number 005712239, a life support item critical to mission-critical operations. Strict quality control and full traceability requirements are mandated due to the item’s essential role in medical and emergency support systems, demanding rigorous adherence to established standards throughout all production phases. The manufacturing process must ensure durability, reliability, and compliance with all applicable military specifications, with each unit subjected to thorough inspection and documentation to guarantee performance under demanding conditions. This acquisition is structured as a subcontract under a Total Small Business Set-Aside designation, meaning only small businesses qualify to respond, as defined by the Small Business Administration under FAR 19.5. The North American Industry Classification System code 339920 indicates the work falls under Other Miscellaneous Manufacturing, aligning the scope with specialized fabrication of non-electronic medical or safety equipment. The solicitation was posted on August 4, 2026, with a response deadline set for September 3, 2026, and is managed by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. Performance is expected to occur under the oversight of this agency, with no specific location designated, allowing flexibility for qualified small businesses to fulfill the requirement while maintaining full compliance with federal defense procurement protocols.
Sporting and Athletic Goods Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 29 days
View Details
NAICS: 488510
New
DIBBS
Logistics and Packaging for Defense ShipmentsThe contract seeks qualified small businesses to develop and execute military-compliant packaging and shipping plans tailored for defense shipments, ensuring full adherence to DFARS freight requirements. This includes the accurate collection and submission of dimensional and weight data essential for precise transport cost modeling, which directly impacts logistics efficiency and compliance across the Department of Defense supply chain. All proposed solutions must meet strict military standards for protection, labeling, and handling during transit, with a focus on minimizing damage and ensuring timely delivery under operational conditions. This is a total small business set-aside under NAICS code 488510, exclusively reserved for small businesses as defined by the SBA, and is issued as a subcontract under the ASC SUPPLIER OPER AE AND AF DIV of the Department of Defense. Interested parties must submit their proposals by the deadline of September 3, 2026, with the requirement to demonstrate proven experience in defense logistics, packaging certification, and compliance with federal regulations governing military transport. Performance is expected to align with DoD logistics protocols, though no specific location is designated for performance. Bidders are directed to the official DIBBS portal for full solicitation details and submission guidelines.
Freight Transportation Arrangement

POSTED

about 16 hours ago

DEADLINE

in 29 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance and CMMC Assessment SupportThis contract solicits support services to enable defense contractors to achieve CMMC Level 2 compliance by implementing the controls outlined in NIST SP 800-171, conducting comprehensive system assessments, and preparing accurate SPRS reports for Controlled Unclassified Information environments. The work is targeted at small businesses, as the procurement is set aside entirely for small business participation under SBA guidelines, and is classified under NAICS code 541512 for computer systems design services. The services must be delivered to ensure full alignment with Department of Defense cybersecurity requirements for handling sensitive government data, with an emphasis on documentation, validation, and continuous compliance readiness. The contract is issued under the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV and is structured as a subcontract, indicating it supports a larger prime contracting effort. Interested parties must submit responses by September 3, 2026, and all activities will be performed in support of government contracts handling Controlled Unclassified Information. The solicitation is publicly accessible via the DIBBS portal, and while the place of performance and point of contact are not specified, the nature of the work requires close coordination with federal defense contractors across multiple locations to facilitate assessment, implementation, and reporting activities on-site or remotely as needed.
Computer Systems Design Services

POSTED

about 16 hours ago

DEADLINE

in 29 days
View Details