Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

SPACER, SLEEVE

Active
SPE4A6-26-T-11VTFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of 243 units of a spacer sleeve identified by NSN 5365-01-210-3039 under solicitation SPE4A6-26-T-11VT, with a response deadline of August 12, 2026, and a delivery requirement of 171 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with specific provisions applicable depending on the acquisition type and revision dates in effect at the time of solicitation or award. The item is subject to tailored higher-level quality requirements, inspection and acceptance at origin, and strict packaging standards defined by DLA. Export control regulations under ITAR or EAR apply to associated technical data, prohibiting unauthorized disclosure or export to foreign persons, including foreign nationals within the United States, and requiring compliance with DFARS 252.225-7048. Access to controlled technical data is restricted to contractors with approved US/Canada Joint Certification Program certification, completion of mandatory DOD export control training, and formal approval from DLA. Government identification must be removed from non-accepted supplies, and the place of performance is specified as New Cumberland, Pennsylvania, with Emma Garrett of the ASC Commodities Division serving as the primary point of contact.

General Info

Procure 243 spacer sleeves NSN 5365-01-210-3039, deliver in 171 days, ITAR/EAR controlled, DLA quality and packaging standards apply.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

315990 - Apparel Accessories and Other Apparel ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-11VT.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
Emma Garrett
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SPACER,SLEEVE
SPACER,SLEEVE
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 5365-01-210-3039 Quantity: 243 EA Purchase Request: 7017742396QTY: 243 Delivery: 171 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 315990
New
DIBBS
RESPIRATOR, AIR FILT
Solicitation # SPE8E6-26-T-3979
The contract is for the procurement of one unit of a respirator, air filtering, identified by NSN 4240-01-479-1676 and part number 6900PF from 3M Company, with delivery required within 20 days to Fort Belvoir, Virginia, FOB origin. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersedes any other standards including ASTM D3951, and must be strictly followed. Packaging must comply with DLA packaging requirements, MIL-STD-129 labeling, and, if hazardous, FED-STD-313 and TQ requirement IP025; otherwise, commercial packaging under ASTM D3951 is acceptable. The item must be palletized per RP001 and shipped by the fastest traceable means, explicitly excluding parcel post. Inspection and acceptance occur at destination, with zero variance allowed in quantity. The contract references covered defense information and mandates the removal of government identification from rejected supplies. Delivery is to be made to the designated storage site at Fort Belvoir, with all markings and shipping instructions adhering to the provided DLA identifiers and contact information, and the original required delivery date is July 31, 2026.
Defense Logistics Agency

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 315990
New
DIBBS
TUBE, SAMPLING, RESPIRAT
Solicitation # SPE8E6-26-T-3974
The contract pertains to the procurement of respirator sampling tubes under NSN 4240-01-391-8240, supplied by Mine Safety Appliances Company, DBA Safety Products Division, from Murrysville, PA. The unit of issue is a box (BX), with a single box containing 25 units, and the full order quantity is one box. Delivery is required within 20 days FOB origin, with no tolerance for quantity variance—neither plus nor minus percent is allowed. Inspection and acceptance both occur at the destination, and packaging must comply with DLA’s Master List of Technical and Quality Requirements, which supersede ASTM D3951 if conflicting. If the item is classified as hazardous under FED-STD-313, it must be packaged per TQ requirement IP025; otherwise, commercial packaging per ASTM D3951 applies, but all packaging must also meet MIL-STD-129 labeling standards. Palletization follows DLA’s RP001 packaging requirements. The shipment is to be sent using the fastest traceable means, excluding parcel post, to the designated military address in Indianapolis, IN, with the RDD code 555 and project identifier TP 3. The required delivery date is July 31, 2026, and the contract number is SPE8E6-26-T-3974. The item is subject to Covered Defense Information guidelines and must have government identifiers removed if non-accepted. Primary point of contact is John Lieb, and the solicitation was posted on August 4, 2026, with a response deadline of August 17, 2026.
Defense Logistics Agency

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 315990
New
Federal
321 STS - Extreme Cold Weather Gear
Solicitation # FA558726Q0042
The contract titled 321 STS - Extreme Cold Weather Gear is solicited under number FA558726Q0042 and was posted on August 4, 2026, with a response deadline of August 14, 2026, at 10:30 PM Eastern Time. It is a combined solicitation with no set-aside classification and falls under the NAICS code 315990, which pertains to other apparel and accessory manufacturing. The requirement specifies the procurement of extreme cold weather gear in strict accordance with the salient characteristics detailed in Attachment 1, ensuring compliance with military standards for harsh environmental conditions. The issuing office is part of the Department of Defense, operating under the administrative designation FA5587 48 Cons, located at APO AE 09461-5120, with the gear to be delivered to RAF Mildenhall in Suffolk, United Kingdom. Primary point of contact for the solicitation is 2nd Lt Logan Villanueva, reachable via email at logan.villanueva.3@us.af.mil or by phone at 314-226-5050, with secondary support provided by Claire Switzer at claire.switzer.gb@us.af.mil. Interested vendors must submit proposals through the SAM.gov platform using the provided UI link before the deadline. The solicitation does not specify a minimum order quantity or delivery schedule beyond the requirement for gear to meet prescribed environmental performance criteria, and all submissions must align with the technical specifications in Attachment 1 to be considered responsive.
FA5587 48 Cons (admin Only No Req)

POSTED

about 8 hours ago

DEADLINE

in 10 days
View Details
NAICS: 315990
New
DIBBS
Supply of Protective Sunglasses (NSN 8465-01-729-3691)A subcontract has been issued for the manufacture, packaging, and delivery of one pair of military-spec protective sunglasses designated by NSN 8465-01-729-3691, meeting all Department of Defense standards set forth by the Defense Logistics Agency. The product must be individually packaged and shipped to a specified location in San Diego, California, with a zip code of 92145-2025. The solicitation, posted on August 3, 2026, requires responses by August 14, 2026, and falls under the NAICS code 315990 for other miscellaneous textile product mills. The contracting organization is C AND T SUPPLY CHAIN acting on behalf of the Department of Defense, with the work to be performed in compliance with all military specifications and delivery timelines.
C AND T SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 315990
New
DIBBS
CARABINER, PULLEY
Solicitation # SPE1C1-26-T-1576
The contract pertains to the procurement of carabiners and pulleys under solicitation SPE1C1-26-T-1576, with a single National Stock Number 8465016131241 and a total quantity of four units delivered in three separate line items at $2.00 and $1.00 per unit respectively. All items must be delivered FOB destination within 20 days of contract award with zero variance allowed in quantity and are subject to inspection and acceptance at the delivery point. Packaging and labeling strictly follow DLA’s Master List of Technical and Quality Requirements, with specific directives for barcode application: each item requires an individually attached paper tag made of 100-pound bleached sulfate with a smooth finish, bearing a 13-digit NSN and a corresponding 12-digit government-assigned UPC, printed in medium to high density and fully visible when folded and packaged. Tags must be affixed without damaging the item, using Type VIII paper tag per MIL-DTL-32075 for loose or bundled items or Type VII pressure-sensitive label if enclosed in plastic. Packaging must adhere to MIL-STD-129 for marking and labeling, and commercial packaging must follow ASTM D3951 unless the item is hazardous, in which case TQ requirement IP025 applies. The DLA Master List overrides any conflicting standards. Palletization must comply with RP001, and shipment must be sent via traceable freight only, not parcel post, to the designated military facility at Camp Pendleton, California. Inspection is governed by FAR 52.246-2, and MIL-STD-105E has been canceled in favor of MIL-STD-1916 or ANSI/ASQ Z1.4. All documentation and compliance are subject to the most current revision of referenced standards applicable at the time of solicitation or award.
C AND T SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 315990
New
DIBBS
GOGGLES, SUN, WIND AN
Solicitation # SPE1C1-26-T-1574
The contract is for one pair of sunglasses designed for protection against sun, wind, and dust, identified by part number EE7001-01 and NSN 8465-01-729-3691, under solicitation SPE1C1-26-T-1574. The item must comply with technical and quality requirements referenced from the DLA Master List, packaging standards MIL-STD-2073-1E and MIL-STD-129, and palletization requirements under MIL-STD-147, with no bulk packaging allowed. Marking must follow MIL-STD-129 with no special codes, and the unit of issue is each, with a strict quantity variance of plus or minus zero percent. Delivery is required within 20 days FOB destination to Marine Aviation Logistics Squadron 16 at MCAS Miramar, San Diego, with shipment to be sent by the fastest traceable means and prohibited from parcel post. The item is intended for government use, with a required delivery date of August 5, 2026, and the supplier must adhere to all DLA packaging, shipping, and identification protocols including removal of government identification from non-accepted supplies. The shipping address, point of contact, and transportation protocols are strictly defined, and the contract includes specific codes for internal government tracking and logistics coordination.
C AND T SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 315990
New
DIBBS
GLOVES, CHEMICAL PRO
Solicitation # SPE2DS-26-T-303X
Chemical protection gloves made of rubber butyl material are specified for procurement in pairs, with each pair designed for unisex use and sized large, measuring 14 inches in length. The gloves feature a safety cuff, rough finish, and black coloration, engineered to deliver high tactile sensitivity and manual dexterity while reducing worker fatigue through a curved hand design. They are lightly powdered and exhibit excellent resistance to aldehydes, ketones, esters, alcohols, most inorganic acids, caustics, dioxane, and salts. The unit of issue is a pair, and the National Stock Number is 8415-01-499-3002 with a quantity of four pairs required under purchase request 7017712621. Delivery is due within 20 days of award. The solicitation, identified as SPE2DS-26-T-303X, was posted on August 3, 2026, with responses due by August 10, 2026, and is managed by the Department of Defense under the Medical Supply Chain MD Surg FSF. The place of performance is Moody AFB, Georgia, 31699-1500, and the point of contact is Mary-Kathryn Donahue. Compliance with DLA packaging requirements and technical quality standards identified by R or I numbers from the DLA Master List is mandatory, with the applicable revision controlled by the solicitation issue date. Government identification must be removed from non-accepted supplies as per RQ011 requirements.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 315990
New
DIBBS
GLOVES, CHEMICAL AND
Solicitation # SPE2DS-26-T-300Z
The contract specifies the procurement of 8 pairs of chemical and oil protective gloves, made from neoprene over natural rubber with a 26 mil thickness and 12 inches in length, sized extra-large. The gloves are flock lined, feature a tractor tread grip, and are colored black-over-blue with a safety design. They are puncture resistant and offer resistance to acids, alcohols, oils, and caustics, meeting compliance with 21 CFR parts 170–199. The unit of issue is a pair, and the NSN is 8415-01-448-8646. Bidders must clearly state the source and part number being supplied, and all supplies must adhere to DLA packaging and technical requirements as outlined in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. The solicitation, identified as SPE2DS-26-T-300Z, was posted on August 3, 2026, with a response deadline of August 10, 2026, and requires delivery within 20 days after order placement. The purchase request number is 7017702020, and the place of performance is Beale AFB, California, with a ZIP code of 95903-1908. The contracting agency is the Department of Defense under the Medical Supply Chain MD Surg FSF unit, and the primary point of contact is Marc Canalichio, reachable via email and phone. The NAICS code is 315990, indicating the classification for other textile product mills, and the procurement is for federal use without a set-aside designation.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 315990
New
DIBBS
CARRIER, CHEMICAL MA
Solicitation # SPE1C1-26-T-1573
This contract issued by the Department of Defense through the Defense Logistics Agency specifies the procurement of 9 units of a chemical carrier identified by NSN 8465-01-703-2002 and part number MGMK4P01-BK from Resilience Tactical LLC. The item must be delivered within 20 days of contract award to FPO AP 96663-4122, with delivery terms set as FOB Destination, meaning the vendor assumes all responsibility until the goods are received at the final delivery point. Inspection and acceptance occur at the destination, with zero tolerance for quantity variance. Packaging must strictly comply with MIL-STD-2073-1E and MIL-STD-129, ensuring proper marking, unit packaging, and palletization per DLA requirements, while also meeting ASTM D3951 standards. Technical and quality specifications referenced via R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. The contract prohibits government identification removal from non-accepted supplies and includes provisions for covered defense information. Transportation details follow DLAD procedural notes C19 and C20, and the shipment is designated under RDD 777. The required delivery date is August 5, 2026, and the solicitation closed on August 14, 2026, under solicitation number SPE1C1-26-T-1573.
C AND T SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 315990
New
DIBBS
GLOVES, CHEMICAL AND
Solicitation # SPE2DS-26-T-300V
This contract is for the procurement of two pairs of chemical and oil protective gloves, designated by NSN 8415-01-448-8645, designed for high-resistance performance in hazardous environments. The gloves feature a dual-layer construction of neoprene over natural rubber, with a flock-lined interior for comfort and a tractor tread grip for enhanced handling. They are 12 inches in length and 26.0 millimeters thick, engineered to resist acids, alcohols, oils, and caustics, and meet puncture resistance standards. The gloves are black over blue in color, sized large, and manufactured in compliance with 21 CFR 170-199 for material safety in medical and industrial applications. Each unit is issued as a pair, with a delivery requirement within 20 days of award. The solicitation, issued under SPE2DS-26-T-300V on August 3, 2026, with a response deadline of August 10, 2026, is managed by the Department of Defense through the Medical Supply Chain MD Surg FSF office, with performance to be delivered to Beale AFB, CA, 95903-1908. Technical and quality requirements are governed by DLA’s Master List, as referenced under RP001 and RA001, with compliance determined by the version in effect on the solicitation or award date, depending on acquisition scale. Removal of government identification from non-accepted supplies is required under RQ011. The point of contact for inquiries is Marc Canalichio, reachable via email and phone provided in the contract data.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 315990
New
Federal
USMS FY26 D81 DEPUTY GEAR
Solicitation # 15M10226QA4700230
The U.S. Marshals Service is soliciting quotes for FY26 Deputy Gear under solicitation number 15M10226QA4700230, which is a Small Business Set Aside with no restrictions on the size of the small business. The request is specifically for gear required for deputy marshals, with items not being name-brand specific, and technical substitutions are prohibited unless accompanied by full technical specifications for evaluation. All offers must be submitted in two volumes: Volume 1 must be on official company letterhead including the company name, logo, address, point of contact details, and CAGE code, while Volume 2 must be the completed and signed SF-1449 form with pricing entered on the CLINs and clause USMS-0004 fully populated. Offerors must be registered in the System for Award Management and possess an active CAGE code to be eligible. The government is seeking additional discounts beyond standard pricing. The solicitation was posted on August 3, 2026, and all responses are due by 5:00 PM Eastern Time on August 10, 2026. The place of performance is located in Salt Lake City, Utah, with the office address listed in Dayton, Ohio. Proposals that fail to follow all submission instructions will be deemed non-responsive and will not be evaluated. All correspondence must reference the RFQ number in the subject line and be directed to Jennifer Brite at jennifer.brite@usdoj.gov.
Department Of Justice US Marshal Service

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 315990
New
DIBBS
Fitted Vehicle Cover ManufacturingThe contract involves the manufacture of custom-fitted protective covers for military combat vehicles, strictly adhering to the National Stock Number 2540015077822. The work requires precision cutting, industrial sewing, and rigorous quality control to ensure each cover meets stringent military standards for durability, fit, and environmental resilience under operational conditions. All components and processes must align with defense-specific specifications to guarantee performance in demanding field environments. This is a subcontract opportunity issued under NAICS code 315990, with a response deadline of August 17, 2026, and posted on August 2, 2026. The contracting entity is the LSO Combat Vehicles and Armament division within the Department of Defense, and performance is expected to support military logistics and vehicle protection needs. There is no specified set-aside designation or geographic restriction listed, and the point of contact information is unavailable, though all submissions must be made through the provided DIBBS portal link.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

2 days ago

DEADLINE

in 13 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 332312
New
DIBBS
Supply of Fasteners (NSN 5307-01-212-4400)
Fabricated Structural Metal Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 14 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance and Assessment Support
Computer Systems Design Services

POSTED

about 3 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 541611
New
DIBBS
Supply Chain Traceability and Documentation Management
Administrative Management and General Management Consulting Services

POSTED

about 3 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 541380
New
DIBBS
First Article Testing (FAT) and Production Lot Testing (PLT) Services
Testing Laboratories and Services

POSTED

about 3 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332722
New
DIBBS
Manufacturing and Supply of Critical Safety Item (CSI)
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332722
New
DIBBS
RING, RETAINING
Solicitation # SPE4A6-26-T-12LQ
This contract pertains to the procurement of retaining rings identified by NSN 5325-01-269-2248, with a quantity of 290 units to be delivered FOB origin within 171 days. The requirement is governed by stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with packaging and marking mandated to comply with MIL-STD-2073-1E and MIL-STD-129. Packaging must adhere to DLA-specific guidelines, including prohibited use of mercury or mercury-containing compounds in preservation, packaging, and marking, except for enumerated functional applications such as batteries, fluorescent lamps, and approved instruments, which must additionally feature shock-proof design and a secondary containment barrier in accordance with NAVSEA 5100-003D. The contract explicitly prohibits the intentional introduction of mercury into any supplied hardware. Delivery is to be made to the DLA Distribution San Joaquin receiving warehouse in Tracy, California, with no variance permitted in quantity. The item is flagged as a critical application, and documentation for source approval must meet specified requirements. The solicitation was issued under contract number SPE4A6-26-T-12LQ with a response deadline in August 2026, and the primary point of contact is Marchello Fields from the ASC Commodities Division.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, MACHINE
Solicitation # SPE4A6-26-T-11PM
This contract specifies the procurement of 3,776 machine screws identified by NSN 5305-00-054-5636 and part number MS51957-2, manufactured to the current revision of MIL-STD or industry consensus standards, with all items produced after the solicitation date required to meet the latest version of the governing specification. The items are classified as commercial and subject to tailored quality requirements including inspection and acceptance at origin, with zero non-conformances mandated in sampling under MIL-STD-1916 or equivalent zero-based plans. Critical attributes are verified at the highest level, and unspecified features are treated as major. The screws must not contain or come in direct contact with mercury or mercury compounds except under specific exemptions for functional components like batteries or sensors, and portable devices containing mercury must have shock-proof design and secondary containment as per NAVSEA 5100-003D. All packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, with preservation methods including drying and protective materials, and marking adhering strictly to MIL-STD-129 without special codes. Mercury is prohibited in preservation and packing materials. Items are to be delivered FOB origin in 146 days to Warner Robins AFB, Georgia, with no tolerance for quantity variance. The supplier must ensure physical identification is applied per MIL-STD-130N, and all hardware must be traceable with manufacturer logos, lot numbers, and material markings. Transportation and shipping instructions reference DLA procedural notes, and all contractual requirements are governed by the DLA Master List of Technical and Quality Requirements referenced in the document.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
PIN, QUICK RELEASE
Solicitation # SPE4A6-26-T-11RF
This contract pertains to the procurement of a quick-release pin identified by NSN 5315-00-575-5740, with a required quantity of 184 units to be delivered FOB origin within 171 days, with no variance allowed in quantity. All items must conform strictly to the current revision of the part standard SPE4A6-26-T-11RF Section B, and previous revisions are only acceptable for hardware manufactured prior to the solicitation date. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with sampling procedures adhering to MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance unless otherwise stated; critical, major, and minor attributes are assigned verification levels VII, IV, and II respectively. The item is classified as a critical application and must undergo inspection and acceptance at the manufacturer’s origin. Mercury and mercury-containing compounds are prohibited unless essential for functional components such as batteries, fluorescent lamps, sensors, or weapon systems, and where used, portable devices must include a secondary containment barrier per NAVSEA 5100-003D. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking required. Palletization follows DLA packaging standards, and delivery is directed to DLA Distribution San Joaquin in Tracy, California. The contract enforces full compliance with defined standards, prohibits intentional contamination with hazardous substances, and mandates original delivery by January 31, 2027, despite the original required date of December 17, 2026.
Hardware Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335999
New
DIBBS
INSULATION SLEEVING SE
Solicitation # SPE4A6-26-T-11ZR
The contract specifies the procurement of an Electrical Insulation Sleving Set with part number LNCL-12-140-CK-N and NSN 5970015164430, quantity of 60 kit units, under solicitation SPE4A6-26-T-11ZR. The item is subject to stringent technical and quality requirements mandated by the DLA Master List of Technical and Quality Requirements, including mandatory Item Unique Identification (IUID) in compliance with MIL-STD-130, and must be packaged and marked per MIL-STD-2073-1E and MIL-STD-129 with special shelf life marking code 32. The item is classified as a Critical Application Item with a non-extendable shelf life of 60 months, requiring strict adherence to preservation and packaging standards. Mercury and mercury-containing compounds are strictly prohibited from direct contact with the item or its packaging, except for functional uses in batteries, lamps, or instruments as specifically authorized by NAVSEA. Sampling must follow MIL-STD-1916 or a comparable zero-based plan, with zero non-conformances required unless otherwise stated. The item must be procured in lengths divisible by 10 feet and delivered FOB origin within 171 days to the DLA Distribution facility in New Cumberland, PA, with a delivery deadline of January 31, 2027, despite the original required date being May 5, 2028. No quantity variance is permitted, and inspection and acceptance occur at destination, with all documentation and compliance governed by DFARS and DLA procedural notes.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
PRODUCTION LOT TESTING
Solicitation # SPE4A6-26-T-12FD
The contract pertains to the procurement of seven radio frequency cable assemblies with the NSN 0001S00000061, issued under solicitation SPE4A6-26-T-12FD with a response deadline of August 12, 2026, and a delivery requirement 261 days after award. Technical and quality requirements referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the size of the acquisition. Packaging, identification, and removal of government markings from non-accepted items must comply with specific DLA directives, including RQ011 and RP001. Sampling for quality verification must follow MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required unless otherwise stated; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Physical identification of the item must conform to RQ017, and source approval documentation must adhere to RC001. Technical data associated with this item is subject to export control under ITAR or EAR, restricting disclosure to foreign persons and requiring compliance with DFARS 252.225-7048; access is limited to contractors with approved US/Canada Joint Certification Program certification, completed DLA training, and formal authorization. The place of performance is Greensboro, North Carolina, and primary point of contact is Traci Beaudoin at DLA.
Other Electronic Component Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, SOCKET HEAD
Solicitation # SPE4A6-26-T-11TF
The contract is for 158 units of socket head cap screws with NSN 5305-01-032-9232, issued under solicitation SPE4A6-26-T-11TF by the Department of Defense’s ASC Commodities Division. The unit of issue is each (EA), with a fixed unit price and total price based on the documented quantity; no variance is permitted in the delivered quantity. Delivery is required within 217 days of award, with FOB origin terms meaning the contractor assumes responsibility for shipment from the point of origin. Inspection and acceptance both occur at the destination warehouse located at 25600 S Chrisman Road, Tracy, CA 95304-5000. Packaging must comply with MIL-STD-2073-1E, including preservation method 10, dry climate conditions, and no mercury or mercury compounds permitted in any packaging materials. Marking must adhere to MIL-STD-129 with no special marking required, and palletization must follow DLA’s RP001 packaging standards. The parcel post and freight shipping addresses are identical, directing delivery to Recipient Warehouse 57. The original required delivery date is April 7, 2027, with a need ship date of March 18, 2027. Transportation instructions reference DLA procedural notes C19 and C20. The contract was posted on August 4, 2026, with responses due by August 12, 2026, and is classified under NAICS 332722 for machinery manufacturing. Primary point of contact is Lisa Harvie, reachable via phone or email provided.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
RING, RETAINING
Solicitation # SPE4A6-26-T-11PN
The contract is for the procurement of 820 retaining rings identified by NSN 5325-00-187-9033 under solicitation SPE4A6-26-T-11PN, classified as a commercial item and procured through a fully competitive process. The item must comply with the current revision of its defining military or consensus non-government part standard, with prior versions accepted only for hardware manufactured before the solicitation date. Quality assurance requirements are governed by MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based sampling plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. Sampling must result in zero non-conformances unless otherwise allowed by the contract, and manufacturers may choose between attribute or variable inspection methods under MIL-STD-1916. The item is subject to DLA’s master list of technical and quality requirements, with revisions controlled by the solicitation issue date for simplified acquisitions. Identification marking must adhere to MIL-STD-130N dated 16 November 2012, and government identification must be removed from non-accepted supplies. Delivery is due within 171 days of award, with performance at Hill AFB, Utah, and the primary point of contact is Carl Younce at DLA.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details