Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 14 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Special Purpose Electrical Cable Assembly Fabrication

Active

Federal

Response Deadline10/19/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the fabrication of 712 special purpose electrical cable assemblies for prime contractors supporting the DLA Weapons Support Land Supplier Operations Engines. The work must be performed in accordance with TDP Rev C Gen 3 and specific Army drawings, with quality control sampling conducted per MIL-STD-1916, ASQ H1331, and QAP 16236. Performance will take place in Barstow, California. The project is designated as a Total Small Business Set-Aside under NAICS code 335931. To be eligible, the contractor must maintain ISO 9001:2015 certification and ensure full compliance with ITAR/EAR regulations, CMMC Level 2, and JCP certification requirements. The response deadline for this Department of Defense opportunity is October 19, 2026.

General Info

Fabricate 712 electrical cable assemblies in Barstow, California by October 19, 2026.

Agency

Department Of Defense → DLA WEAPONS SUPPORT LAND SUPPLIER OPNS ENGINES

NAICS

335931 - Current-Carrying Wiring Device Manufacturing

Place of Performance

BARSTOW, CA, 92311-5014, USA

Set-Aside

SBA

Documents

This scope was carved out of SPE7L5-27-Q-0007.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

CABLE ASSEMBLY, SPECIAL

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 9

subcontract

Response DeadlineOct 19

Submission deadline

Response Deadline

10/19/2026, 05:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LAND SUPPLIER OPNS ENGINES

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LAND SUPPLIER OPNS ENGINES

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Fabricates special purpose electrical cable assemblies for prime contractors on DLA Weapons Support Land Supplier Operations projects. Fabricates assemblies IAW TDP Rev C Gen 3 and Army drawings 19207 8701278, 19207 8701280, and 19207 8724316. Performs quality control sampling IAW MIL-STD-1916 or ASQ H1331 and QAP 16236. Requires JCP certification, ITAR/EAR compliance, ISO 9001:2015, and CMMC Level 2. Delivers 712 completed assemblies.

Similar Contracts

Same NAICS industry code

Specialized Wire and Connector SupplyThis subcontract involves the supply of high-reliability electrical wire and connectors for prime contractors supporting the DLA Weapons Support ASC Commodities Division within the Department of Defense. The scope of work focuses on the delivery of bulk raw electrical components that strictly adhere to DWG PPD 802-6337554 Rev B and Brancher and Associates part number 218083269. A critical requirement of the contract is ensuring all provided materials are mercury-free in accordance with NAVSEA 5100-003D. To maintain quality and compliance, the supplier must provide full material traceability and Certificates of Conformance for all components. The opportunity is categorized under NAICS code 335931, with a response deadline set for October 23, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

MIL-SPEC Special Purpose Cable Assembly FabricationThis subcontract, issued by the DLA Weapons Support ASC Commodities Division, requires the fabrication of 2,519 feet of finished, packaged, and marked special purpose electrical cable assemblies under NSN 6150-01-619-4041. The project is a total small business set-aside under NAICS code 335931. Manufacturing must strictly adhere to MIL-DTL-24643/59B Revision B and TDP Rev A Gen 1, utilizing zero-based sampling plans in accordance with MIL-STD-1916 or ASQ H1331. Compliance requirements include a CMMC Level 2 Self-Assessment and the use of WAWF for processing. The solicitation was posted on October 9, 2026, with a response deadline of October 23, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

CABLE ASSEMBLY, SPECIAL

Solicitation # SPE4A6-26-T-28MP

Solicitation SPE4A6-26-T-28MP, issued by the DLA Aviation ASC Commodities Division, is for the procurement of three special purpose electrical cable assemblies under NSN 5995016284627. The contract specifies a delivery timeline of 171 days after order, with a need ship date of March 8, 2027, and an original required delivery date of December 2, 2027. Terms are FOB Origin, with inspection and acceptance occurring at the destination, specifically the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contractor must adhere to strict quality and packaging standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for DLA packaging and palletization requirements. Quality assurance requires sampling per MIL-STD-1916, ASQ H1331, or a comparable zero-based sampling plan. Notably, the use of mercury or mercury-containing compounds is prohibited in the hardware, preservation, and packaging. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with DFARS 252.204-7012 for safeguarding covered defense information. Item Unique Identification is not required for this effort.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

CABLE ASSEMBLY, SPEC

Solicitation # SPE4A6-26-T-97V7

ASC COMMODITIES DIVISION

POSTED

DEADLINE

CABLE ASSEMBLY, SPECIAL

Solicitation # SPE4A6-26-T-36ZR

Solicitation SPE4A6-26-T-36ZR, issued by the DLA Aviation ASC Commodities Division, is a request for quotations for two branched, special purpose electrical cable assemblies, part number 12106-1010-A006 and NSN 5995-01-679-8698. This requirement is intended for Foreign Military Sales to Taiwan, with a required delivery date of September 29, 2026, and a delivery lead time of 20 days after order. The contract specifies FOB Origin for delivery, inspection, and acceptance. The contractor must adhere to strict quality and technical standards, including MIL-STD-1916 or ASQ H1331 for sampling and MIL-STD-129 for marking. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements. Key regulatory compliance includes CMMC Level 2 Self-Assessment, safeguarding of covered defense information, and adherence to the Buy American Act and Berry Amendment. Invoicing and payment will be processed electronically through the Wide Area WorkFlow system.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Power Supply Teardown, Evaluation, and Repair ServicesThis subcontract involves providing specialized teardown, technical evaluation, repair, and modification services for Power Supply NSN 6130-01-630-9299. Supporting prime contractors for Navsup Weapon Systems Support Mech projects under the Department of Defense, the selected provider must execute all repairs according to TDP Version 006 and adhere to ANSI/ESD S20.20-2021 standards for electrostatic discharge protection to deliver a fully restored and modified unit. The project requires strict adherence to security and handling protocols, including CMMC/NIST SP 800-171 compliance and the capability to handle Naval Nuclear Propulsion Information. Classified under NAICS code 335931, the opportunity was posted on October 9, 2026, with a response deadline of October 26, 2026.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Solicitation # SPRMM126QKJ12

Solicitation SPRMM1-26-Q-KJ12, issued by DLA Mechanicsburg, seeks quotations for the manufacture and delivery of a power supply, identified by NSN 7HH 6130-01-486-5409 and Cage Code 04801, reference number 700-35214. Award will be granted based on the Lowest Price Technically Acceptable (LPTA) criteria. Offerors who are not the original equipment manufacturer must identify the OEM and their respective CAGE code. The government requires the use of the Wide Area Workflow (WAWF) system for the electronic submission of combined invoice and receiving reports. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-130 for physical identification and MIL-STD-2073-1 for preservation and packaging. Inspection and final acceptance will occur at the origin, specifically the contractor's or subcontractor's plant, with the contractor maintaining inspection records for 365 days post-delivery. Key regulatory requirements include CMMC Level 1 self-certification, compliance with the Buy American-Balance of Payments Program, and adherence to DFARS 252.204-7012 for safeguarding covered defense information. All shipments must comply with ISPM 15 wood packaging standards and be delivered F.O.B. Origin.

SPRMM1 DLA Mechanicsburg

POSTED

DEADLINE

Solicitation # N0010427QUA11

Solicitation N0010427QUA11 is a total small business set-aside request for quotations issued by the Navsup Weapon Systems Support Mech for the repair of power supplies under NSN 6130-01-661-5664. The government seeks a single award based on the lowest aggregate total price, considering both the initial quantity and a prospective 100 percent increased quantity option for a period of 365 days. The resulting contract will be firm-fixed price and requires the awardee to be an authorized repair source. Key performance metrics include a requested repair turnaround time of 44 days after receipt of assets, with a reconciliation price reduction penalty for inexcusable contractor delays. The scope of work encompasses the teardown, evaluation, repair, and modification of the power supplies in accordance with original manufacturer specifications and drawings. Contractors must adhere to strict quality and reporting standards, including mandatory Commercial Asset Visibility reporting, MIL-STD-130 physical identification, and ANSI/ESD S20.20 electrostatic discharge controls. Packaging must comply with MIL-STD-2073, and all items are subject to government source inspection. Payments will be processed electronically via Wide Area Workflow. Offerors must submit their quotes, representations, and certifications electronically to the designated point of contact, Kate C. Heidelberger.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Solicitation # N0010427QNA14

Solicitation N0010427QNA14, issued by Navsup Weapon Systems Support Mech, is a Firm-Fixed Price requirement for the teardown, evaluation, repair, and modification of a power supply (NSN 7HH 6130-01-630-9299). The contract is issued under Emergency Acquisition Flexibilities and is DO certified for national defense. Award will be made based on a Lowest Priced Technically Acceptable basis, with technical acceptability determined by compliance with solicitation instructions and a lack of exceptions to terms. Past performance, evaluated via the Supplier Performance Risk System, also serves as a key evaluation factor. The selected contractor must provide an estimated repair price initially, followed by a firm-fixed price quote within 90 days of receiving the carcass after completing a teardown and evaluation. Deliverables must be completed within 120 days and shipped FOB Destination to the DLA Distribution New Cumberland facility. Strict adherence to quality and packaging standards is required, including MIL-STD-2073 for packaging, MIL-STD-130 for physical identification, and ANSI/ESD S20.20-2021 for electrostatic discharge protection. Invoicing and receiving reports must be processed electronically through the Wide Area Workflow system. Compliance with various federal and defense regulations is mandatory, including Cybersecurity Maturity Model Certification (CMMC) requirements, Buy American and Balance of Payments programs, and NIST SP 800-171 assessment requirements. If the offeror is not the Original Equipment Manufacturer, they must provide a signed letter of authorization on the OEM's letterhead. All inspection and acceptance will occur at the origin, with the contractor maintaining inspection records for 365 days following final delivery.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Supply of Electrical Connector Backshells (NSN 5935-01-615-1446)This subcontract involves the manufacture or procurement of 33 electrical connector backshells, specifically NSN 5935-01-615-1446, for the DLA Weapons Support Active Devices Division. The components must feature an olive drab finish and marking in strict accordance with DLA Master List RA001 and RQ017. All items are to be delivered FOB Origin and must be packaged according to MIL-STD-129, ASTM D3951, and RP001 standards. The contract requires full compliance with the Buy American Act and the Berry Amendment. Performance will take place in Jacksonville, Florida, under NAICS code 335931. Interested parties must respond by October 19, 2026, to support prime contractors operating within the Department of Defense.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Radio Frequency Cable Assembly Supplier (PN: 06-1-17-060-0FL)This subcontract involves the supply of nine Radio Frequency Cable Assemblies for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The supplier is responsible for manufacturing or procuring assemblies that strictly match Part Number 06-1-17-060-0FL and NSN 5995016339626. All units must undergo quality sampling in accordance with MIL-STD-1916 or ASQ H1331 and adhere to RQ017 marking requirements. Compliance mandates include a CMMC Level 2 Self-Assessment and strict adherence to the Buy American Act and the Berry Amendment. The performance of the contract is centered in Tracy, California, under NAICS code 335931. Interested parties must respond by October 16, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Sectional Terminal Junction BlocksThis subcontract involves the procurement and delivery of nine sectional terminal junction blocks, specifically Weidmuller Ltd P/N 1694140000 or A1-103400, for prime contractors supporting the Department of Defense. The hardware must be mercury-free and strictly adhere to MIL-STD-129 marking and MIL-STD-2073-1E packaging standards. Delivery is required FOB Origin to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. To be eligible, providers must meet rigorous security and compliance standards, including a CMMC Level 2 self-assessment and adherence to DFARS 252.204-7012. The contract is managed under the DLA Weapons Support ASC Supplier Oper AE and AF Division with a response deadline of October 16, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT LAND SUPPLIER OPNS ENGINES

Same awarding agency

Military Packaging and Distribution ServicesThis small business set-aside subcontract involves providing specialized packaging and distribution services for the Department of Defense, specifically supporting DLA Weapons Support Land Supplier Operations. The contractor is responsible for packaging, marking, and palletizing items in strict accordance with MIL-STD-2073-1E, MIL-STD-129, and RP001 standards. Key operational requirements include the coordination and delivery of shipments to DLA Distribution centers located in Barstow, California, and Texarkana, Texas. The successful provider must demonstrate proficiency in using the Wide Area Workflow system for all necessary shipping documentation. Performance of these services is centered in Barstow, California, under NAICS code 488510. Interested parties must adhere to the response deadline of October 19, 2026.

Freight Transportation Arrangement

POSTED

DEADLINE

ASTM B187 Compliant Material SupplyThis subcontract, titled ASTM B187 Compliant Material Supply, involves the provision of raw copper-silver-phosphorus alloy materials for prime contractors supporting DLA Weapons Support Land Supplier Operations Engines. The materials must strictly adhere to ASTM B187 standards and military specifications, with the supplier required to provide all necessary material certifications and test reports to verify compliance. The scope of work includes the delivery of these certified raw materials directly to the manufacturer, with performance taking place in Barstow, California. The opportunity is designated as a Total Small Business Set-Aside under FAR 19.5 and falls under NAICS code 327992. Managed by the Department of Defense, the solicitation was posted on October 9, 2026, with a response deadline of October 19, 2026.

Ground or Treated Mineral and Earth Manufacturing

POSTED

DEADLINE

Chemical Agent Resistant Coating (CARC) ApplicationThis small business set-aside subcontract involves the application of specialized protective coatings for prime contractors supporting DLA Weapons Support Land Supplier Operations. The scope of work focuses on the application of Chemical Agent Resistant Coatings in accordance with DCCS Drawing 16236 CS-2300-0001, as well as high-temperature coatings following Army specifications. The primary deliverable consists of coated cable assembly components, and the contractor must maintain CARC application certification to ensure all work meets the DLA Master List of Technical and Quality Requirements. The project is managed under the Department of Defense through the DLA Weapons Support Land Supplier Opns Engines agency, with performance taking place in Barstow, California. Interested parties must adhere to the solicitation timeline, with a response deadline set for October 19, 2026. The contract is categorized under NAICS code 325510 and is designated as a total small business set-aside.

Paint and Coating Manufacturing

POSTED

DEADLINE

CABLE ASSEMBLY, SPECIAL

Solicitation # SPE7L5-27-Q-0007

Solicitation SPE7L5-27-Q-0007 is a Firm Fixed Price request for the procurement of 712 special purpose electrical cable assemblies (NSN 5995-00-772-8813), divided into two line items of 178 and 534 units. This is a Total Small Business Set-Aside issued by the Defense Logistics Agency Weapons Support Land Supplier Operations Engines. Deliveries are required within 275 days after order to DLA Distribution centers in Barstow, California, and Texarkana, Texas. Award will be based on best value, evaluating price, offered delivery, and past performance. The contractor must adhere to strict technical and quality standards, including TDP Rev C Gen 3, QAP 16236, and ASTM B187. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129. Inspection and acceptance will occur at the origin. Due to the nature of the technical data, this contract is subject to ITAR and EAR export controls, requiring approved JCP certification for access. Additionally, the contractor must comply with DFARS 252.204-7012 for safeguarding covered defense information and use the Wide Area WorkFlow system for all invoicing and payment requests.

Other Electronic Component Manufacturing

POSTED

DEADLINE

Industrial Phosphate Coating ServicesThis subcontract for Industrial Phosphate Coating Services supports the DLA Weapons Support Land Supplier Opns Engines. The selected contractor will be responsible for applying protective phosphate finishes to gears, specifically performing Heavy Phosphate per MIL-DTL-16232 and Light Phosphate per TT-C-490. Work will be performed in New Cumberland, and the contractor must utilize industrial phosphate plating tanks while adhering to all prohibitions regarding ozone-depleting chemicals. To be eligible for this project, contractors must hold JCP Certification to ensure authorized access to necessary technical data. The contract was posted on October 8, 2026, with a response deadline of October 15, 2026. The primary objective is the delivery of finished gears that meet all approved protective phosphate coating specifications for the Department of Defense.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

DEADLINE

Case Hardening and Metallurgical Testing ServicesThis subcontract for Case Hardening and Metallurgical Testing Services supports prime contractors on DLA Weapons Support Land Supplier Opns Engines projects. The scope of work involves performing case hardening and destructive testing, specifically measuring effective case depth according to ASTM E384 and verifying core hardness. To execute these tasks, the provider must possess a metallurgical lab equipped for sectioning and polishing, and must maintain JCP Certification to access necessary technical data. The contractor is responsible for delivering hardened gear batches along with formal test reports that verify the required case depth and core hardness. This project is managed under the Department of Defense and is associated with NAICS code 332813, with the place of performance located in New Cumberland. Interested parties should note the response deadline of October 15, 2026.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

DEADLINE

Precision Machining and Fabrication of Spur GearsThis subcontract involves the precision machining and fabrication of spur gears for the DLA Weapons Support Land Supplier Opns Engines. The scope of work includes the machining of gear blanks and tooth cutting according to drawing INUW7 I15815555 Revision R to produce three final units and two units for First Article Testing. All deliverables must strictly adhere to the specified TDP dimensions. To qualify for this project, the manufacturer must possess CNC gear cutting equipment and maintain ISO 9001:2015 certification. Additionally, JCP Certification is mandatory to ensure authorized access to ITAR and EAR regulated data. The performance of the contract will take place in New Cumberland, Pennsylvania.

Speed Changer, Industrial High-Speed Drive, and Gear Manufacturing

POSTED

DEADLINE

Supply of Fluid Filter Element Set (Tintometer Standards)

Industrial Supplies Merchant Wholesalers

POSTED

DEADLINE

Military-Grade Packaging and Shipping ServicesThis subcontract for Military-Grade Packaging and Shipping Services supports the Department of Defense through the DLA Weapons Support Land Supplier Opns Engines agency. The scope of work involves providing specialized packaging and preparation for prime contractors, specifically requiring the cleaning, drying, and preservation of items. All work must be executed in strict accordance with MIL-STD-2073-1E and DLA requirement RP001. The primary deliverable consists of 199 packaged and marked identification plates. The contractor is responsible for executing First Destination Transportation protocols to ensure the secure delivery of these items to DLA Distribution DDSP in New Cumberland, Pennsylvania. The project is categorized under NAICS code 488410.

Motor Vehicle Towing

POSTED

DEADLINE

Custom Identification Plate FabricationThis subcontract involves the fabrication and delivery of 199 custom identification plates for the Department of Defense, specifically supporting DLA Weapons Support Land Supplier Opns Engines projects. The contractor is required to produce the plates according to Oshkosh Defense LLC part number 12603950 and NSN 2590-01-680-8060, utilizing precision printing, engraving, or etching equipment. All deliverables must strictly adhere to MIL-STD-129 marking standards and the DLA Master List of Technical and Quality Requirements. The work is categorized under NAICS code 339999, with the place of performance located in New Cumberland, Pennsylvania.

All Other Miscellaneous Manufacturing

POSTED

DEADLINE

Military-Grade Packaging and Shipping ServicesThis subcontract for Military-Grade Packaging and Shipping Services involves providing specialized packaging and marking for prime contractors fulfilling DLA supply contracts. The scope of work requires strict adherence to ASTM D3951 for packaging and MIL-STD-129 and RP001 DLA Packaging Requirements for marking shipments. Additionally, the contractor must ensure all hazardous materials are labeled according to the Hazard Communication Standard before delivering shipping-ready containers to DLA Distribution Barstow. Managed by the Department of Defense under the DLA Weapons Support Land Supplier Opns Engines, the contract falls under NAICS code 561910. The place of performance is located in Barstow, California. Interested parties should note the response deadline of October 19, 2026.

Packaging and Labeling Services

POSTED

DEADLINE

Stabilizer Bar ManufacturingThis subcontract involves the manufacture of 42 stabilizer bars under NSN 2510-01-558-4769 for the Department of Defense, specifically the DLA Weapons Support Land Supplier Opns Engines. The contractor is required to fabricate the units in strict accordance with provided technical data and the DLA Master List of Technical and Quality Requirements RA001. All finished products must be delivered to DLA Distribution Barstow. Compliance requirements for this contract include adherence to the Buy American Act and a strict prohibition on the use of Class I Ozone Depleting Chemicals. The project falls under NAICS code 332999, with a response deadline set for October 19, 2026.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS