Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 14 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Special Purpose Electrical Cable Assembly Fabrication

Active

Federal

Response Deadline10/26/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the fabrication of five special purpose electrical cable assemblies for the DLA Weapons Support Land Supply Chain. Work must be performed according to Technical Data Package Rev A Gen 1 and Basic Drawing NR 19207 123, with First Article Testing required on three of the units. The contractor is mandated to use QPL/QML components and ensure all packaging complies with ASTM D3951 and MIL-STD-129 standards. To be eligible, the provider must maintain SAE AS9003 or ISO 9001 certification and meet CMMC Level 2 requirements. The project is categorized under NAICS code 334418 and will be performed in New Cumberland. The final deliverable consists of five completed and tested assemblies.

General Info

Fabricate five electrical cable assemblies for DLA following specific technical and certification standards.

Agency

Department Of Defense → DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

NAICS

334418 - Printed Circuit Assembly (Electronic Assembly) Manufacturing

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7L1-27-T-1394.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

CABLE ASSEMBLY, SPECIAL

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 13

subcontract

Response DeadlineOct 26

Submission deadline

Response Deadline

10/26/2026, 05:00:00 PM UTCin 12 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Fabricates special purpose electrical cable assemblies for prime contractors on DLA Weapons Support Land Supply Chain projects. Builds five units per Technical Data Package Rev A Gen 1 and Basic Drawing NR 19207 123. Performs First Article Testing (FAT) on three units. Uses QPL/QML components and adheres to ASTM D3951 and MIL-STD-129 packaging. Requires SAE AS9003 or ISO 9001 and CMMC Level 2. Delivers five completed, tested assemblies.

Similar Contracts

Same NAICS industry code

Manufacture of Special Purpose Electrical Switch Cable AssembliesThis subcontract involves the full assembly and testing of 18 special purpose electrical switch cable assemblies for the Department of Defense under the DLA Weapons Support ASC Commodities Division. The work must be performed in accordance with Reference Drawing NR 19207 12313649 Rev 10 and TDP Rev A Gen 7 to produce components identified by NSN 6150-01-245-9580. To be eligible, contractors must maintain CMMC Level 2 certification and adhere to either ISO 9001 or SAE AS9003 quality systems. The place of performance is located in Tracy, California, and the project falls under NAICS code 334418.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 23 hours ago

DEADLINE

Qualified Component Supply for NSN 6150-01-454-6623This subcontract involves the supply of qualified electrical components, specifically connectors, wires, and terminals, for the DLA Weapons Support Land Supply Chain. The components must strictly adhere to the specifications outlined in TDP Rev A Gen 1 and Basic Drawing NR 19207 123. To ensure quality and compliance, all parts must be sourced from Qualified Products List or Qualified Manufacturers List providers in accordance with procurement note RQ016 and must be delivered with accompanying certificates of conformance. The contract is associated with NSN 6150-01-454-6623 and falls under NAICS code 334418. Performance for this requirement is located in New Cumberland, Pennsylvania. Interested parties should note the posted date of October 13, 2026, with a response deadline set for October 26, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 23 hours ago

DEADLINE

Manufacture and Supply of ISO-Compatible QUADCON ContainersThis subcontract involves the manufacture and supply of ISO-compatible QUADCON containers for prime contractors supporting DLA Troop Support equipment contracts. The selected provider must fabricate units that adhere to ISO 668, 1161, 1496-1, 6346, and 830 standards, ensuring the inclusion of connecting couplers and adjustable shelving. Final deliverables must be certified, painted, and fully assembled container systems. Strict compliance with MIL-STD-810 and MIL-STD-1366 is required, along with mandatory CSC and IMDG certifications. The project is managed under the Department of Defense through Construction and Equipment Containers, with a response deadline of October 26, 2026. Performance for this contract is designated for FPO 96349.

CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

about 23 hours ago

DEADLINE

Manufacture and Supply of Nonmetallic Hose Assembly (NSN 4720-01-508-4995)This subcontract involves the manufacture and supply of a single nonmetallic hose assembly for the Department of Defense, specifically supporting the DLA Weapons Support Fluid Handling Division. The contractor is responsible for fabricating the assembly according to the technical data package for NSN 4720-01-508-4995 and ensuring all items are packaged in accordance with MIL-STD-2073-1E and MIL-STD-129 standards. Performance of this contract requires the provider to maintain JCP certification and ensure full compliance with ITAR and EAR regulations. The work is associated with NAICS code 334418 and is designated for performance in Silverdale, Washington. Responses to this solicitation are due by October 26, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 23 hours ago

DEADLINE

Circuit Card Assembly Fabrication and AssemblyThis subcontract involves the manufacture and assembly of one Circuit Card Assembly, part number 12D1402-1, supporting the DLA Weapons Support Maritime Supply Chain. The scope of work encompasses PCB fabrication, component sourcing, and population utilizing both SMT and through-hole equipment. All units must undergo testing according to OAI Electronics specifications and adhere to sampling standards per MIL-STD-1916 or ASQ H1331. The project is managed under NAICS code 334418 for the Department of Defense. A critical compliance requirement for this contract is a CMMC Level 2 Self-Assessment. The final deliverable is one completed and tested CCA, with the place of performance designated as FPO 09573.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 23 hours ago

DEADLINE

CIRCUIT CARD ASSEMBLY

Solicitation # SPE7M1-27-T-0908

Solicitation SPE7M1-27-T-0908, issued by the DLA Weapons Support Maritime Supply Chain, is for the procurement of one Circuit Card Assembly, part number 12D1402-1 (NSN 5998013722193), manufactured by OAI Electronics, LLC. The item is to be delivered FOB Destination to the USS Gunston Hall LSD 44 with a required delivery date of October 7, 2026, and a delivery window of 20 days after order. Inspection and acceptance will occur at the destination. The contract mandates strict adherence to technical and quality requirements, including a CMMC Level 2 Self-Assessment and specific sampling methods per MIL-STD-1916 or ASQ H1331. Due to the sensitive nature of the hardware, DOD qualified Electrostatic Discharge (ESD) and Electromagnetic Interference (EMI) protective packaging is required in accordance with MIL-PRF-81705 and MIL-STD-2073-1E, with marking following MIL-STD-129. Additionally, the contract prohibits the intentional addition of mercury per NAVSEA 5100-003D and requires compliance with the Buy American Act and various DFARS regulations regarding covered defense telecommunications and cybersecurity. Payment and receiving reports must be processed electronically through the Wide Area WorkFlow (WAWF) system.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 23 hours ago

DEADLINE

CIRCUIT CARD ASSEMBLY

Solicitation # SPE4A6-26-T-28NM

This solicitation, issued by the DLA Aviation ASC Commodities Division, is for the procurement of six circuit card assemblies under NSN 5998012249399. The requirement is designated as a critical application item with a required delivery date of August 26, 2026, and a delivery window of 350 days after order. Inspection and acceptance will take place at the destination. The contract incorporates strict quality and technical standards, recommending the use of MIL-PRF-31032 for printed circuit boards and requiring sampling methods in accordance with MIL-STD-1916 or ASQ H1331. Packaging and marking are critical components of this requirement, with all shipments adhering to MIL-STD-129 and MIL-STD-2073-1E. Due to the nature of the electronics, the contractor must provide DOD qualified electrostatic discharge and electromagnetic interference protective packaging per MIL-PRF-81705, utilizing materials from QPL-81705 qualified manufacturers. Additionally, the contract mandates CMMC Level 2 self-assessment and compliance with DFARS 252.204-7012 for safeguarding covered defense information. Payment and invoicing must be processed electronically through the Wide Area WorkFlow system.

ASC COMMODITIES DIVISION

POSTED

about 23 hours ago

DEADLINE

CIRCUIT CARD ASSEMB

Solicitation # SPE4A1-27-T-0117

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN

POSTED

about 23 hours ago

DEADLINE

SWITCH, SENSITIVE

Solicitation # SPE7M8-27-T-0275

DLA WEAPONS SUPPORT ELECTRICAL DEVICES DIV

POSTED

about 23 hours ago

DEADLINE

RELAY, SOLID STATE

Solicitation # SPE7M2-26-U-0511

Solicitation SPE7M2-26-U-0511 is a request for quotations issued by the DLA Land and Maritime Nuclear Reactor Program for the procurement of solid state relays, specifically part number M28750/10-001Y (NSN 5945013095942). This requirement may result in a unilateral Indefinite Delivery Contract (IDC) for a one-year period with a maximum value of 350,000.00 USD. The estimated annual quantity is 220 units, with a guaranteed contract minimum of 33 units and a minimum delivery order quantity of 55 units. Delivery is required within 276 days, FOB Origin, for locations within the continental United States. The items are designated as critical application items and must be sourced from the Qualified Products List (QPL) or Qualified Manufacturers List (QML). Strict adherence to technical standards is required, including MIL-PRF-28750/10F and MIL-PRF-28750K. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, with mandatory DOD qualified electrostatic discharge (ESD) and electromagnetic interference (EMI) protection per MIL-PRF-81705. Additionally, contractors must provide lead finish markings according to IPC/JEDEC J-STD-609 and ensure that no class I ozone-depleting substances or intentionally added mercury are used in the hardware. Inspection and acceptance will occur at the destination, with sampling conducted per MIL-STD-1916 or ASQ H1331.

NUCLEAR REACTOR PROGRAM

POSTED

about 23 hours ago

DEADLINE

Backplane Assembly and UID LabelingThis subcontract for Backplane Assembly and UID Labeling supports DLA Aviation projects through the final assembly and marking of 37 Backplane Assemblies. The scope of work involves populating printed wiring boards with components and applying Unique Item Identification labels using tesa Secure Tape or an approved equivalent. All work must strictly adhere to MIL-STD-130N, Engineering Order 2011C1545-T, and the DOD Guide to Uniquely Identifying Items v3.0. The contractor is required to possess the necessary UID printing equipment to ensure compliance with Department of Defense standards for the agency located in Oklahoma City.

Ok DLA Aviation At Oklahoma City

POSTED

DEADLINE

in about 1 month

F-16 Backplane Printed Wiring Board FabricationThis subcontract involves the fabrication of 37 raw printed wiring boards for F-16 aircraft backplane assemblies, supporting prime contractors on projects for DLA Aviation within the Department of Defense. All manufacturing must strictly adhere to Drawing No. 948F941 and established aerospace-grade PCB standards to ensure the high precision required for these components. To qualify for this project, the provider must utilize high-precision fabrication equipment and maintain AS9100 quality certifications. Additionally, the contract mandates full compliance with the Buy American Act. The solicitation was posted on October 13, 2026, with a response deadline of November 14, 2026.

Ok DLA Aviation At Oklahoma City

POSTED

DEADLINE

in about 1 month

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

Same awarding agency

Manufacture and Supply of Sleeve Bearings (NSN 3120-01-547-5806)

Hardware Manufacturing

POSTED

about 23 hours ago

DEADLINE

Fabrication and Supply of Mounting Plates (P/N 300008)This subcontract involves the fabrication and supply of 22 mounting plates, part number 300008, for the DLA Weapons Support Land Supply Chain. The contractor is responsible for producing these units using stamping or precision machining, ensuring all items are packaged according to ASTM D3951 and marked in compliance with MIL-STD-129. Final delivery of the completed plates is to be made to DLA Distribution Red River in Texarkana. The agreement requires strict adherence to NIST SP 800-171 cybersecurity standards to protect sensitive information. Operating under NAICS code 332510, the project is managed through the Department of Defense. Interested parties must have submitted responses by the October 26, 2026, deadline.

Hardware Manufacturing

POSTED

about 23 hours ago

DEADLINE

Casting Alloy SupplyThis SDVOSB set-aside subcontract involves the sourcing and delivery of certified raw metal alloys for the DLA Weapons Support Land Supply Chain. The contractor is responsible for providing materials that strictly adhere to the specifications outlined in drawing 19207 7364254 Revision L and delivering them directly to the designated casting facility in Anniston. Compliance is mandatory regarding the Buy American Act and the Berry Amendment. Additionally, all supplied materials must be free of hexavalent chromium and Class I ozone-depleting chemicals. The solicitation was posted on October 13, 2026, with a response deadline of October 26, 2026.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 23 hours ago

DEADLINE

Access Cover Casting and ToolingThis subcontract for the DLA Weapons Support Land Supply Chain involves the design and fabrication of custom tooling and the production of 583 Access Covers. All work must adhere to drawing 19207 7364254 Revision L and MIL-STD-1916 standards, with final delivery of the finished covers handled as FOB Origin. The project is designated as a Service-Disabled Veteran-Owned Small Business set-aside under NAICS code 332510, with performance taking place in Anniston. To be eligible, contractors must maintain ISO 9001 or SAE AS9003 quality systems and ensure full compliance with ITAR/EAR regulations and DFARS 252.204-7012 cybersecurity requirements. The solicitation was posted on October 13, 2026, with a response deadline of October 26, 2026.

Hardware Manufacturing

POSTED

about 23 hours ago

DEADLINE

MIL-SPEC Packaging and Crating ServicesThis subcontract for MIL-SPEC Packaging and Crating Services supports the DLA Weapons Support Land Supply Chain. The contractor is responsible for providing specialized military-grade packaging and marking for 163 individually packaged clutch disks. All work must be performed in accordance with MIL-STD-2073-1E and MIL-STD-129, utilizing specific preservative materials MAT:49 and wrapping or cushioning materials MAT:G8, following QUP:001 and PRES MTHD:31 guidelines. The project is located in Anniston, Alabama, and requires the final deliverables to be ready for FOB Origin shipment. The solicitation was posted on October 13, 2026, with a response deadline of October 26, 2026. The contract falls under NAICS code 488410 and is managed through the Department of Defense.

Motor Vehicle Towing

POSTED

about 23 hours ago

DEADLINE

Manufacturing of Vehicular Clutch DisksThis subcontract involves the manufacturing of 163 vehicular clutch disks for the DLA Weapons Support Land Supply Chain under the Department of Defense. The contractor is responsible for fabricating the units according to Basic Drawing NR 19207 12267369 Revision F, utilizing precision machining and forming equipment to produce finished components identified by NSN 2520-01-073-4266. Performance of the contract will take place in Anniston, Alabama. To be eligible, the manufacturer must maintain ISO 9001:2015 certification and hold US/Canada Joint Certification Program certification. Additionally, the contractor must be authorized under ITAR and EAR regulations. The solicitation was posted on October 13, 2026, with a response deadline of October 26, 2026, falling under NAICS code 332710.

POSTED

about 23 hours ago

DEADLINE

Military-Grade Packaging and LogisticsThis subcontract for Military-Grade Packaging and Logistics supports prime contractors fulfilling DLA supply contracts for the Department of Defense, specifically the DLA Weapons Support Land Supply Chain. The scope of work involves providing specialized military packaging and freight services, ensuring all items are packaged according to MIL-STD-2073-1E and marked in compliance with MIL-STD-129. The service provider is responsible for coordinating the fastest traceable transport of palletized shipments to the final destination at the DLA depot in Texarkana, Texas. This opportunity falls under NAICS code 488510 and requires strict adherence to military standards to ensure compliant delivery of critical supplies.

Freight Transportation Arrangement

POSTED

about 23 hours ago

DEADLINE

Fabrication and Supply of Access CoversThis subcontract involves the fabrication and supply of seven finished access covers for prime contractors supporting DLA supply contracts. The parts must be manufactured according to NSN 5340-01-327-0798 using non-additive manufacturing methods. Quality assurance requires sampling performed per MIL-STD-1916 or ASQ H1331, with marking compliant with MIL-STD-130N. All deliveries must include Certificates of Conformance. The project is managed under the DLA Weapons Support Land Supply Chain within the Department of Defense, with performance located in Texarkana, Texas. To be eligible, the contractor must maintain JCP certification for handling export-controlled data and meet CMMC Level 2 cybersecurity standards. The response deadline for this opportunity is October 26, 2026.

Fabricated Structural Metal Manufacturing

POSTED

about 23 hours ago

DEADLINE

Precision Fabrication of Mechanical Stop RodsThis subcontract involves the precision fabrication of Mechanical Stop Rods for prime contractors supporting the DLA Weapons Support Land Supply Chain. The selected manufacturer will be responsible for the precision machining of NSN 5340-01-325-5460, ensuring all work adheres to government technical data and DLA quality requirements. The final deliverable consists of six finished and packaged rods compliant with MIL-STD-2073-1E. To qualify for this contract, the provider must hold US/Canada Joint Certification Program certification to ensure authorized access to ITAR/EAR data and government design control approval. The work is categorized under NAICS code 332710 and will be performed in New Cumberland. Interested parties must respond by October 26, 2026.

POSTED

about 23 hours ago

DEADLINE

Supply of Parker-Hannifin O-Rings (NSN 5331-01-693-8807)This subcontract involves the procurement of 50 Parker-Hannifin O-rings, identified by part number P2-003-8904-9 and NSN 5331-01-693-8807, to support DLA Weapons Support Land Supply Chain requirements for FMS Australia. The items must be delivered FOB Origin and adhere to strict packaging standards, requiring seals in medium-duty, waterproof, greaseproof, and opaque bags in accordance with MIL-DTL-117, Type II, Class C, Style 1. The contract mandates full compliance with MIL-STD-2073-1E and MIL-STD-129 standards. Managed under NAICS code 326199 for the Department of Defense, the solicitation was posted on October 13, 2026, with a response deadline of October 26, 2026.

All Other Plastics Product Manufacturing

POSTED

about 23 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract involves providing specialized military packaging, marking, and labeling services for the DLA Weapons Support Land Supply Chain. The scope of work requires the contractor to package 35 snap hooks using military-grade materials in strict accordance with MIL-STD-2073-1E, while ensuring all marking and labeling comply with MIL-STD-129. The final deliverables must be fully prepared for destination acceptance at Moody AFB. This project falls under NAICS code 488510 and is managed by the Department of Defense. Interested parties should note the response deadline of October 26, 2026.

Freight Transportation Arrangement

POSTED

about 23 hours ago

DEADLINE

Snap Hook Supplier (NSN 5340-01-022-3295)This subcontract involves the procurement of 35 snap hooks for the DLA Weapons Support Land Supply Chain. The supplier is responsible for manufacturing or sourcing the hardware components in strict accordance with NSN 5340-01-022-3295 and the DLA Master List of Technical and Quality Requirements. All deliverables must be shipped to Moody Air Force Base in Georgia. Compliance is a critical component of this agreement, as the supplier must adhere to the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 regulations. The opportunity is categorized under NAICS code 332510, with a response deadline set for October 26, 2026.

Hardware Manufacturing

POSTED

about 23 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS