Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Special Purpose Electrical Cable Assembly Manufacturing

Active

Federal

Response Deadline07/27/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract calls for the manufacture and delivery of six units of a military-spec electrical cable assembly identified by NSN 6150-01-261-5694, with all production must meet stringent defense standards. Each unit requires full production lot testing to ensure compliance with technical and performance requirements, and the contractor must submit detailed test reports directly to the government’s Quality Assurance Representative for verification and approval. The work is to be performed at a designated location in New Cumberland, Pennsylvania, with the zip code 17070-5002, and the project is classified as a subcontract under the NAICS code 334419, indicating it falls within the specialty electronic component manufacturing sector. The opportunity was posted on July 19, 2026, with a response deadline of July 27, 2026, and is managed by the ASC Commodities Division under the Department of Defense.

General Info

Six military-spec cable assemblies to be manufactured and tested in New Cumberland, Pennsylvania, per defense standards.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

334419 - Other Electronic Component ManufacturingView NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 19

subcontract

Response DeadlineJul 27

Submission deadline

Response Deadline

07/27/2026, 05:00:00 PM UTCin 6 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC COMMODITIES DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacture and delivery of 6 units of a military-spec electrical cable assembly (NSN 6150-01-261-5694), including production lot testing and submission of test reports to the government's Quality Assurance Representative.

Similar Contracts

Same NAICS industry code

Wiring Harness Manufacturing and AssemblyThe contract involves the manufacture and assembly of 2,060 military-specification electrical wiring harnesses identified by NSN 6150-01-248-2549, requiring full traceability throughout production and compliance with strict packaging standards. All units must be delivered to locations within the continental United States as directed by order, ensuring timely and precise fulfillment of military logistics needs. The work is classified as a subcontract under NAICS code 334419, with the Defense Logistics Agency acting on behalf of the Department of Defense to oversee procurement. The solicitation was posted on July 20, 2026, and performance will be coordinated through the established DLA contracting framework using the referenced award number SPE4A626D5714.

Defense Logistics Agency

POSTED

about 18 hours ago

DEADLINE

Microcircuit Manufacturing and Supply (NSN 5962-01-281-4172)The contract entails the manufacture and delivery of seven qualified linear microcircuits identified by NSN 5962-01-281-4172 and designated as RD004, all of which must adhere to stringent military specifications ensuring performance, reliability, and environmental resilience. Each unit requires full traceability throughout the production lifecycle, from raw materials to final assembly, to guarantee authenticity and compliance with defense standards. In addition to hardware specifications, the supplier must implement and maintain CMMC Level 2 cybersecurity controls to safeguard controlled unclassified information during manufacturing, handling, and communication, ensuring alignment with Department of Defense cybersecurity requirements. This subcontract is issued under the Defense Logistics Agency, a component of the Department of Defense, and is classified under NAICS code 334419 for other semiconductor and related device manufacturing. The contract is not subject to a specific set-aside designation and does not specify a place of performance or point of contact. The solicitation was posted on July 20, 2026, and the award reference is identified as SPE7M126P8879. Compliance with all technical, quality, and cybersecurity provisions is mandatory, and failure to meet these obligations could result in rejection of delivery or contract termination. The supplier is expected to demonstrate proven capability in defense electronics manufacturing and secure supply chain practices.

Defense Logistics Agency

POSTED

about 18 hours ago

DEADLINE

Rotary Switch Supply (Commercial Off-the-Shelf Item)The contract involves the supply of 11 units of a commercial off-the-shelf rotary switch identified by NSN 5930011333696, a component that meets military specifications despite being commercially available. The item is classified under NAICS code 334419, indicating its alignment with electronic component manufacturing, and is being procured as a subcontract under the Department of Defense via the Defense Logistics Agency. Although the solicitation number is not provided and no specific place of performance or point of contact is listed, the contract was posted on July 20, 2026, signaling its placement in the future procurement timeline. The absence of set-aside classification suggests the contract is open to any qualified commercial supplier without restrictions based on business size or status. The electronic component will support defense systems requiring reliable, specification-compliant rotary switches sourced from the commercial market.

Defense Logistics Agency

POSTED

about 18 hours ago

DEADLINE

LIGHT, INDICATORThe contract pertains to the procurement of six LIGHT, INDICATOR units with NSN 6210-01-316-4583 and part number 70902-41838-101, supplied by DUCOMMUN LABARGE TECHNOLOGIES, INC. The units are priced at $6.00 each, totaling $36.00, with delivery required within 20 days under FOB origin terms and zero variance allowed in quantity. Inspection and acceptance occur at the point of origin, and packaging must strictly adhere to MIL-STD-2073-1E standards with specific preservation, wrapping, and unit containment requirements. Marking of the shipment must comply with MIL-STD-129, with no special marking codes applied, and palletization must meet DLA packaging guidelines. The delivery destination is the 2nd Supply Depot in Busan, South Korea, with the freight forwarder and transportation details governed by DLA procedural notes C19 and C20. The contract references technical and quality requirements identified by R and I numbers from the DLA Master List, and the acquisition falls under the Defense Logistics Agency, with the solicitation number SPE8E7-26-T-3264. Covered Defense Information may apply, and documentation for source approval must be submitted in accordance with RC001. The required delivery date is June 17, 2026, and the contract is subject to DLA’s unit of issue standards and oversight for government use, with designated administrative codes for distribution and advancement.

Defense Logistics Agency

POSTED

about 18 hours ago

DEADLINE

SWITCH, PUSHThe item is a PUSH SWITCH with NSN 5930-01-316-7681, quantity of 23 units, under purchase request 7017436985, with a delivery schedule of 157 days ADO. This item is classified as non-CAI and non-CSI and is subject to strict export control regulations under either ITAR or EAR, meaning any transfer of associated technical data to foreign persons—even within the United States—requires prior authorization from the Department of State or Department of Commerce. The technical data is governed by DFARS 252.225-7048, and access is restricted exclusively to DLA contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory DLA training on handling export-controlled data, and are formally approved by DLA to access such information. The solicitation number is SPE7M2-26-T-5696, posted on July 20, 2026, with responses due by July 31, 2026, under NAICS code 334419. The contracting office is the Department of Defense’s Nuclear Reactor Program, with performance taking place in San Diego, California, and primary point of contact being Alisha Blanton.

NUCLEAR REACTOR PROGRAM

POSTED

about 18 hours ago

DEADLINE

SWITCH ASSEMBLYThe contract pertains to the procurement of a SWITCH ASSEMBLY with NSN 5930-01-605-5090 and part number 159400G1, under solicitation SPE7M2-26-T-5695, issued by the Department of Defense’s Nuclear Reactor Program. Ten units are required, to be delivered FOB origin within 144 days of contract award, with no tolerance for quantity variance. Delivery must be made to the DLA Distribution facility at New Cumberland, Pennsylvania, and inspection and acceptance occur at the destination. The item must comply with DLA packaging requirements, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and MIL-DTL-28786 for preservation, all in alignment with the latest revisions. Packaging must be palletized per RP001 and labeled with the specified pack code U, with all markings and procedures meeting federal standards. Strict prohibitions apply to the intentional addition of mercury or mercury-containing compounds in or contacting the switch assembly, except for functional uses in batteries, fluorescent lamps, sensors, weapon systems, or chemical reagents explicitly authorized by NAVSEA. Any portable devices containing mercury must be shockproof and include a secondary containment barrier per NAVSEA 5100-003D. The contract incorporates all applicable technical and quality requirements from the DLA Master List, with revisions tied to the solicitation issue date. Transportation and shipping instructions reference DLA procedural notes C19 and C20, and the delivery must be completed no later than December 23, 2026, despite an original required delivery date of September 1, 2027. The unit of issue is each, priced at $10.00 per unit, with total contract value of $100.00.

NUCLEAR REACTOR PROGRAM

POSTED

about 18 hours ago

DEADLINE

SWITCH, PUSHThe contract pertains to the procurement of 14 units of a PUSH SWITCH with NSN 5930-01-226-8184 under solicitation SPE7M8-26-T-5454, issued by the Department of Defense’s Electrical Devices Division. Delivery is required within 157 days after award, with a response deadline of July 31, 2026, and the solicitation was posted on July 20, 2026. The acquisition falls under NAICS code 334419 and is subject to DLA Packaging Requirements for Procurement, which reference technical and quality standards from the DLA Master List of Technical and Quality Requirements. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the supplied hardware, except for functional uses in batteries, fluorescent lights, specific instruments, sensors, controls, weapon systems, and chemical analysis reagents approved by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shockproof and feature a secondary containment boundary compliant with NAVSEA 5100-003D. The offeror must submit a complete data package for both the primary and alternate parts, as no existing data is available for this item. Performance is designated for New Cumberland, PA, with Dondiego Boler listed as the primary point of contact for inquiries.

ELECTRICAL DEVICES DIV

POSTED

about 18 hours ago

DEADLINE

LEAD, ELECTRICALThis contract is for a single unit of Lead, Electrical, identified by Part Number 868001113 and NSN 6150-12-359-5761, issued under solicitation SPE4A0-26-T-3971 by the Department of Defense through DLA. The item is classified as a critical application and must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, accessible via the specified URL. Packaging must adhere to MIL-STD-2073-1E and marking must follow MIL-STD-129 with no special marking required. The supply must be delivered FOB origin within five days of the contract award, with zero tolerance for quantity variance, and inspection and acceptance occur at the delivery point. Sampling follows MIL-STD-1916 or equivalent zero-based inspection methods, with acceptance criteria of zero non-conformances unless otherwise specified. The item must be shipped via traceable freight, not parcel post, to the receiving point at Fort Carson, Colorado. Documentation for source approval is required, and any government identification must be removed from non-accepted supplies. The contract mandates compliance with DLA packaging and identification standards, including palletization and intermediate container requirements. The required delivery date is July 13, 2026, and the point of contact is Danita Davis from DLA.

AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 18 hours ago

DEADLINE

WIRING HARNESSThe contract pertains to the procurement of a wiring harness identified by NSN 6150-01-618-3328 and part number 3911818, with a quantity of 13 units to be delivered FOB origin within 275 days from the contract date, targeting a required delivery date of April 22, 2027. All items must comply with DLA packaging requirements per MIL-STD-2073-1E and marking standards per MIL-STD-129, with no special marking required, and must be palletized according to DLA guidelines. The material has no shelf life restriction and is subject to sampling procedures in accordance with MIL-STD-1916 or ASQ H1331 Table 1, where critical, major, and minor attributes must be verified at levels VII, IV, and II corresponding to AQLs of 0.1, 1.0, and 4.0 respectively; unspecifed attributes are considered major. Acceptance criteria require zero non-conformances in the sample lot unless otherwise stated in the contract. Inspection and acceptance occur at the destination, and the unit price is $13.00 per EA for a total price of $169.00. The delivery address is DLA Distribution Red River, Building 499, Texarkana TX 75507-5000, and all transportation details adhere to DLAD Proc Notes C19 and C20. Technical and quality requirements referenced by R and I numbers are governed by the DLA Master List, with the relevant revision controlled by the solicitation issue date for simplified acquisitions. The contract is issued under SPE7L5-26-T-4338 and classified under NAICS code 334419, with procurement information and contact details provided by Bradley Evans at the Department of Defense.

LAND SUPPLIER OPNS ENGINES

POSTED

about 18 hours ago

DEADLINE

SWITCH, SENSITIVEThe contract pertains to the procurement of a SWITCH, SENSITIVE with NSN 5930011968357, quantity of 529 units, under solicitation SPE7M8-26-T-5240, with a delivery schedule of 168 days ADO and FOB ORIGIN terms. The item is to be delivered to the DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at the destination. Packaging must comply strictly with the DLA Master List of Technical and Quality Requirements, which supersedes all other standards including ASTM D3951 for non-hazardous goods and TQ Requirement IP025 for hazardous materials as defined by FED-STD-313. All packaging and labeling must adhere to MIL-STD-129, including barcoding, with palletization following RP001 guidelines. Sampling methods require zero non-conformance acceptance per MIL-STD-1916 or ASQ Z1.4, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Unspecified attributes are classified as major. The contract includes mandatory FAR and DFARS clauses addressing equal opportunity, trafficking in persons, employment verification, sustainable products, hazardous material identification, cybersecurity safeguards, electronic invoicing via WAWF, export control, prohibitions on hexavalent chromium and covered Chinese military company items, and safeguarding covered defense information. Contractor compliance with the DFARS 252.204-7012 clause on cyber incident reporting and NIST SP 800-171 assessment requirements is enforced. The solicitation requires submission via DIBBS by the July 20, 2026 deadline and mandates a Valid Unique Entity ID and CAGE code. Payment processing is governed by WAWF with no alternative invoicing methods permitted. The contract does not specify pricing for this solicitation but references historical prices for context, and no option quantities or extended pricing are provided. Evaluation factors and award basis are not explicitly defined, though compliance with technical and quality requirements appears decisive. The clause 252.223-7001 requires hazardous material labeling per OSHA’s Hazard Communication Standard unless precluded by other federal statutes, with pre-award submission of labels and MSDS required. No key personnel

ELECTRICAL DEVICES DIV

POSTED

about 18 hours ago

DEADLINE

SWITCH, TOGGLEThe contract pertains to the procurement of a SWITCH, TOGGLE with NSN 5930-01-170-2136 and part number LE452-0005-2007, sourced from approved suppliers including Honeywell International Inc., BAE Systems Controls Inc., Safran Power USA LLC, and The Boeing Company. Five units are required at a unit price of $5.00, totaling $25.00, with delivery mandated FOB origin within 155 days of the contract award. All packaging must conform to DLA’s Master List of Technical and Quality Requirements, superseding ASTM D3951, and must comply with MIL-STD-129 for marking and labeling. If the item is classified as hazardous per FED-STD-313, packaging must adhere to TQ requirement IP025; otherwise, commercial packaging per ASTM D3951 is acceptable. Palletization is required under RP001: DLA Packaging Requirements for Procurement. Inspection and acceptance occur at the destination, with no tolerance for quantity variance. The delivery address is the DLA Distribution DDSP New Cumberland Facility in New Cumberland, Pennsylvania, with the original required delivery date of November 3, 2026, and a needed ship date of December 23, 2026. Transportation instructions are governed by DLAD Proc Note C19 for freight and C20 for first destination. The solicitation number is SPE7M8-26-T-5353, issued under NAICS 334419 by the Department of Defense’s Electrical Devices Division, with responses due by July 20, 2026, and the primary point of contact is Dondiego Boler.

ELECTRICAL DEVICES DIV

POSTED

about 18 hours ago

DEADLINE

BAR, LIFTINGThe contract pertains to the procurement of one unit of a BAR, LIFTING item with NSN 4933-00-495-6861 and part number 116C3827, issued under solicitation SPE4A0-26-T-3965 by the Department of Defense through DLA. Delivery is required within five days of award, FOB destination, with no tolerance for quantity variance, and inspection and acceptance occur at the delivery point. The item must be packaged in compliance with ASTM D3951, but all DLA Master List of Technical and Quality Requirements take precedence, including mandatory marking and labeling per MIL-STD-129 and palletization per RP001 DLA Packaging Requirements. The supply is destined for USS GEORGE WASHINGTON CVN 73 at FPO AP 96607 under vessel shipment protocols, with transportation governed by DLAD Proc Notes C19 and C20. The contract incorporates technical and quality standards identified by R or I numbers from the DLA Master List, with sampling governed by MIL-STD-1916 or ASQ H1331, requiring zero non-conformances unless otherwise stipulated. Critical attributes are verified at Level VII or AQL 0.1, major at Level IV or AQL 1.0, and minor at Level II or AQL 4.0. Cybersecurity compliance requires a CMMC Level 2 Self-Assessment, and bare item marking must comply with RQ017. The supplier must remove all government identification from non-accepted supplies per RQ011, and the item must be delivered by July 10, 2026.

AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 18 hours ago

DEADLINE

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

Government Inspection and Acceptance SupportThe contract requires comprehensive support for government inspection and acceptance activities at the point of origin, strictly adhering to MIL-STD-1916 and ASQ Z1.4 quality standards. The contractor must ensure zero non-conformances throughout the inspection process, maintaining rigorous quality control measures and detailed documentation to demonstrate compliance. All quality records must be systematically maintained, readily accessible, and aligned with Department of Defense expectations for traceability and audit readiness. Coordination with Defense Logistics Agency inspectors on-site is mandatory, requiring seamless communication, timely responses, and full cooperation during all phases of inspection and acceptance. This is a subcontract under the Department of Defense’s ASC Commodities Division, categorized under NAICS code 811212, indicating services related to institutional and commercial laundry and dry cleaning, though the specific nature of the items being inspected is not detailed. The opportunity was posted on July 20, 2026, with a response deadline of July 28, 2026. The place of performance and point of contact information are unspecified, and the work is expected to be conducted at the supplier’s origin location under the direct oversight of DLA personnel. All activities must be executed with the highest level of precision and accountability to meet federal quality and acceptance requirements without deviation.

Computer and Office Machine Repair and Maintenance

POSTED

about 18 hours ago

DEADLINE

Hazard Communication and Labeling ComplianceThe contract requires the preparation and submission of hazard warning labels in full compliance with OSHA’s Hazard Communication Standard (29 CFR 1910.1200) and the Defense Federal Acquisition Regulation Supplement clause DFARS 252.223-7001, ensuring that all hazardous or regulated materials are properly labeled and documented. This includes the development of accurate and up-to-date Safety Data Sheets (SDS) to meet federal regulatory requirements for chemical safety and information dissemination across the defense supply chain. The work must align with established government standards for hazard classification, labeling elements, and SDS formatting to support safe handling, storage, and transportation of controlled substances. This subcontract is issued under the NAICS code 541690, which pertains to other scientific and technical consulting services, and is managed by the ASC Commodities Division of the Department of Defense. The solicitation was posted on July 20, 2026, with a firm response deadline of July 28, 2026. Performance is expected to support military logistics and supply operations, though specific location details are not provided. Participation requires demonstrated expertise in regulatory compliance, hazardous materials management, and the ability to deliver documentation that meets stringent DOD and federal safety mandates without deviation.

Other Scientific and Technical Consulting Services

POSTED

about 18 hours ago

DEADLINE

Military Shipment Marking and Bar-CodingThe contract requires the application of exterior container markings and bar codes in strict accordance with MIL-STD-129, ensuring all label formats, content, and placement meet military standards for shipment identification. Additionally, where applicable, permanent item identification must be implemented following MIL-STD-130N guidelines to ensure traceability and compliance across the supply chain. This effort is critical for accurate logistics handling, inventory control, and operational readiness within Department of Defense operations. The solicitation is structured as a subcontract under NAICS code 541990, open for response until July 28, 2026, and is managed by the ASC Commodities Division of the Department of Defense. There is no set-aside designation specified, and the place of performance details are not provided, though performance is expected to align with DoD logistics requirements. Interested parties must access the full solicitation through the DIBBS portal to understand submission protocols and technical expectations, ensuring all marking and identification work is completed to federal military specifications without deviation.

All Other Professional, Scientific, and Technical Services

POSTED

about 18 hours ago

DEADLINE

Military Packaging and Preservation ServicesThe contract requires the packaging and preservation of fasteners in strict compliance with MIL-STD-2073-1E, ensuring all items undergo thorough cleaning and drying processes followed by thread protection using a wrap or sleeve designated by Packaging Code ZZ. Fasteners must be containerized using Unit/Intermediate Container D3 at Packing Level B to meet military standards for shipment and storage readiness. This work is part of a subcontract under the ASC COMMODITIES DIVISION of the Department of Defense, with a solicitation window open from July 20, 2026, through July 28, 2026. The North American Industry Classification System code 493190 applies, indicating services related to courier and messenger services and warehousing and storage, reflecting the logistical and preservation nature of the work. All performance must conform to military specifications without exception, and the contract is open to qualified subcontractors responding through the DLA DIBBS portal.

Other Warehousing and Storage

POSTED

about 18 hours ago

DEADLINE

Precision Fastener Manufacturing and SupplyThe contract requires the manufacture or supply of exactly 50 units of a close tolerance screw designated by NSN 5305-01-047-8822, engineered to meet stringent military specifications. Full traceability of materials and manufacturing processes is mandatory, ensuring each unit can be documented from raw material sourcing through final inspection. The deliverables are subject to ITAR and EAR regulations, necessitating strict compliance with export control requirements for all associated technical data, documentation, and communications. Performance is tied to defense standards, and the work falls under NAICS code 332721, indicating precision hardware manufacturing. The solicitation was posted on July 20, 2026, with responses due by July 28, 2026, under a subcontract structure managed by the ASC Commodities Division of the Department of Defense. All activities must align with federal defense procurement protocols, and the point of performance is not geographically specified, suggesting potential flexibility in production location as long as compliance and delivery obligations are met.

Precision Turned Product Manufacturing

POSTED

about 18 hours ago

DEADLINE

Hazardous Materials Compliance and LabelingThe contract requires full compliance with OSHA standards for hazard communication regarding pins or packaging that may contain hazardous substances, mandating the provision of Material Safety Data Sheets and appropriate hazard warning labels. All elements of communication must align with federal safety regulations to ensure proper identification and handling of chemical risks associated with the products. The work is governed under NAICS code 541690 and is structured as a subcontract awarded by the ASC Commodities Division of the Department of Defense, with performance expected at a facility in New Cumberland, Pennsylvania, with a ZIP code of 17070-5002. Interested parties must submit responses by the deadline of July 28, 2026, following the solicitation posted on July 20, 2026, through the DIBBS platform.

Other Scientific and Technical Consulting Services

POSTED

about 18 hours ago

DEADLINE

Cybersecurity and CDI SafeguardingThe contract requires implementation of NIST SP 800-171 security controls to safeguard Covered Defense Information handled by the contractor, ensuring compliance with federal cybersecurity standards for protecting sensitive unclassified information related to DoD operations. All systems and processes must be configured to meet the full scope of the NIST framework, including access control, audit accountability, incident response, and data encryption, to mitigate risks associated with unauthorized access or data breaches. The contractor is obligated to detect, report, and respond to any cyber incident involving Covered Defense Information within 72 hours of discovery, following established DoD protocols for incident reporting and forensic documentation. This subcontract, issued by the ASC Commodities Division under the Department of Defense, pertains to work performed at the place of performance in New Cumberland, Pennsylvania, with a NAICS code of 541512 indicating IT services and related consulting. The solicitation was posted on July 20, 2026, and responses are due by July 28, 2026, with no set-aside classification specified. Compliance with the contractual cybersecurity mandates is non-negotiable and directly tied to the contractor’s ability to handle federal defense information. Failure to adhere to the required controls or timely incident reporting may result in contract termination, penalties, or loss of eligibility for future DoD work.

Computer Systems Design Services

POSTED

about 18 hours ago

DEADLINE

Domestic and International Shipping of Defense SuppliesThe contract requires the transport and delivery of packaged defense fasteners within 144 days, adhering strictly to military shipping standards and mandatory WAWF reporting protocols. The scope encompasses both domestic and international shipping operations, ensuring timely and compliant movement of critical defense supplies to the designated performance location in New Cumberland, Pennsylvania, with the zip code 17070-5002. All logistics must align with the NAICS code 484220, which classifies the activity under truck transportation of freight. The contract is structured as a subcontract under the ASC Commodities Division of the Department of Defense, with a response deadline set for July 28, 2026, and the solicitation was posted on July 20, 2026. Compliance with defense logistics regulations and accurate documentation through WAWF are non-negotiable requirements for successful contract execution.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 18 hours ago

DEADLINE

Inspection and Quality Assurance at OriginThe contract requires comprehensive inspection and quality assurance services at the manufacturing site in New Cumberland, Pennsylvania, with a focus on first-article and lot acceptance inspections conducted in accordance with MIL-STD-1916. This includes the verification of all critical, major, and minor product attributes to ensure compliance with established military standards. The work is structured as a subcontract under the NAICS code 541330, indicating engineering and technical services, and is issued by the ASC Commodities Division of the Department of Defense. The solicitation was posted on July 20, 2026, with responses due by July 28, 2026, and the performance location is fixed at the specified zip code 17070-5002. All inspection activities must be carried out on-site at the origin to validate conformity before lot release, ensuring product integrity and adherence to defense quality requirements.

Engineering Services

POSTED

about 18 hours ago

DEADLINE

Military-Compliant Packaging and LabelingThe contract requires compliance with MIL-STD-129 and ASTM D3951 for the packaging, marking, and labeling of military fasteners, ensuring adherence to standardized military specifications for traceability, durability, and uniformity. All packaging must include accurate identification data, barcoding, and proper handling instructions as mandated by these standards, with additional requirements for hazardous material communication if the fasteners or associated components contain regulated substances. The work must be performed in alignment with Department of Defense protocols and delivered to the specified place of performance in New Cumberland, Pennsylvania, with the zip code 17070-5002. This is a subcontract opportunity under NAICS code 493190, and responses are due by July 28, 2026, with the solicitation posted on July 20, 2026, through the DIBBS system.

Other Warehousing and Storage

POSTED

about 18 hours ago

DEADLINE

Precision Fastener ManufacturingThe contract involves the manufacture of 891 precision straight headed pins to meet stringent military specifications NASM20392 and NASM5673, intended for critical aerospace applications where reliability and exacting standards are paramount. The work requires adherence to exact dimensional, material, and finish requirements dictated by these military standards, ensuring performance under extreme operational conditions. All units must be produced in compliance with quality control protocols consistent with defense sector expectations, with final inspection and documentation to verify conformance before delivery. The contract is classified as a subcontract under NAICS code 332510 for forging and stamping, and is solicited by the ASC Commodities Division of the Department of Defense. Proposals are due by July 28, 2026, with the place of performance designated as New Cumberland, Pennsylvania, with zip code 17070-5002. The solicitation was posted on July 20, 2026, and is accessible through the DIBBS platform, indicating the procurement is part of the Defense Logistics Agency’s supply chain infrastructure to support national defense aerospace needs.

Hardware Manufacturing

POSTED

about 18 hours ago

DEADLINE

Cybersecurity Compliance and CUI Protection ServicesThe contract requires the provision of cybersecurity compliance services to ensure adherence to CMMC Level 2 and NIST SP 800-171 standards for the protection of controlled unclassified information. The scope of work centers on implementing and maintaining the necessary safeguards, policies, and procedures to meet federal cybersecurity requirements for handling sensitive government data. Performance is expected to be executed at the designated location in Tracy, California, with the contractor responsible for establishing a compliant cybersecurity posture that aligns with Department of Defense standards for subcontractors handling CUI. The contract type is classified as a subcontract under NAICS code 541512, indicating it falls within the computer systems design and related services category. Issued by the ASC Commodities Division under the Department of Defense, the solicitation was posted on July 20, 2026, with responses due by July 28, 2026. All parties engaging in this effort must ensure full alignment with CMMC Level 2 controls, which include access management, audit and accountability, configuration management, incident response, and data protection measures. The contractor is expected to demonstrate readiness for third-party assessment and ongoing compliance validation without relying on external documentation or referenced files.

Computer Systems Design Services

POSTED

about 18 hours ago

DEADLINE