Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Special Purpose Electrical Cable Assembly Supply

Active

Federal

Response Deadline08/16/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract entails the supply of 74 specialized electrical cable assemblies designated by NSN 6150-01-522-1330, manufactured to meet stringent military specifications. These assemblies are critical components intended for defense applications and must comply with all technical and quality standards required by the Department of Defense. The solicitation, posted on July 17, 2026, sets a response deadline of August 16, 2026, providing potential suppliers with a four-week window to submit bids under a subcontract arrangement. The North American Industry Classification System code 335931 identifies the relevant manufacturing sector, underscoring the need for industrial capability in producing electrical wiring and equipment. The contracting activity is managed by the ASC Commodities Division under the Department of Defense, indicating this is a government procurement action aimed at maintaining logistical readiness. While specific performance location and point of contact details are not provided, the order will be executed through the Defense Logistics Agency’s procurement system, accessible via the provided DIBBS link. There is no set-aside designation listed, meaning the contract is open to all qualified vendors without preference based on small business, veteran-owned, or other categories. Full compliance with military-grade tolerances, testing protocols, and delivery timelines is imperative for award consideration.

General Info

Supply of 74 military-spec electrical cable assemblies for DoD via DLA, bids due August 16, 2026.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

335931 - Current-Carrying Wiring Device ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 17

subcontract

Response DeadlineAug 16

Submission deadline

Response Deadline

08/16/2026, 05:00:00 PM UTCin 29 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC COMMODITIES DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of 74 units of a special-purpose electrical cable assembly (NSN: 6150-01-522-1330) meeting military specifications.

Similar Contracts

Same NAICS industry code

Small Business and DBE/MBE/WBE Subcontracting ParticipationThis contract opportunity is designed to facilitate participation by small, disadvantaged, minority-owned, and women-owned businesses in supply or compliance roles under a prime contract managed by the ASC Commodities Division within the Department of Defense. The solicitation, identified by the NAICS code 335931, focuses on subcontracting engagement and does not specify a set-aside type, meaning it is open to qualified entities meeting ownership and size criteria without formal classification under a specific program. Interested businesses must respond by the deadline of August 16, 2026, to be considered for inclusion in the workforce supporting the prime contract's delivery and compliance requirements. The work will be performed without a specified geographic location, indicating potential flexibility in performance sites. Participation is facilitated through the DIBBS platform, where full details and submission protocols can be accessed.

ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

CHARGER,BATTERY,AIRThis solicitation, titled CHARGER,BATTERY,AIR and issued under SPRPA126QUB41 by the Department of Defense through DLA Aviation in Philadelphia, seeks newly manufactured battery chargers for foreign military sales (FMS) customers under non-CLSSA arrangements. The items are owned by foreign nations throughout their lifecycle and will be delivered to a U.S. freight forwarder for shipment directly to the customer country, bypassing the U.S. Department of Defense supply chain entirely. As a result, Item Unique Identification and Valuation requirements are waived, since these parts will never enter DoD inventory or be tracked under DoD systems. All offers must include only newly manufactured components; refurbished, remanufactured, or repaired units are strictly unacceptable. Suppliers must be government-approved sources, and distributors must submit an authorized distributor letter on official letterhead at the time of proposal submission. The parts must be FAA-certified and accompanied by an FAA Form 8130-3 Airworthy Approval Tag. The contract incorporates mandatory clauses regarding warranty, security prohibitions, Buy American provisions, equal opportunity for veterans and workers with disabilities, and compliance with workflow payment and inspection protocols. Delivery instructions follow TAC:P090 and N52 codes, and all proposals must adhere to the deadline of August 17, 2026. No drawings are available, and compliance with integrity of unit pricing, value engineering, and quality standards such as AS/EN/JISQ 9100 or equivalent is required. The solicitation is issued under EAF authority, and critical safety items are subject to DFARS clause 252.209-7010.

Pa DLA Aviation At Philadelphia

POSTED

about 19 hours ago

DEADLINE

in about 1 month

ASSEMBLY,POWER DISTThis contract pertains to the procurement of an ASSEMBLY, POWER DIST under solicitation SPRMM126QGD39, issued by DLA Mechanicsburg on behalf of the Department of Defense. The requirement mandates manufacturing in strict compliance with specified military standards, including MIL-STD-130 Rev N for marking and MIL-STD-2073 for packaging, with all materials required to meet exact design specifications tied to the CAGE code 53711 and reference number 8601113-116. Any changes to design, material, or part number must be formally approved through a written change order, with substitutions categorized under specific codes indicating interchangeability and impact. The contractor is fully responsible for inspection and quality assurance throughout production, maintaining complete records for 365 days post-delivery, and must ensure all supplies comply with contract requirements even in the absence of explicit inspection clauses. Delivery is governed by a deadline of July 10, 2026, with quotes accepted through July 31, 2026, and must demonstrate validity for at least 60 days. Suppliers must comply with mandatory workflows including electronic submission of invoice and receiving reports via WAWF, and RFID tagging is only applicable if the ship-to location is designated under DFARS 252.211-7006, currently none. Distributors must prove authorization from the original equipment manufacturer, and surplus suppliers must submit valid surplus certificates. All contractual documents are deemed issued upon electronic transmission, and vendors are required to register for EDA on PIEE to access modifications and orders. Non-manufacturers must disclose OEM details and CAGE codes, and all submissions must include contact information for communications. The procurement enforces security protocols, small business compliance, and mandatory certifications, while handling classified or controlled documents requires specific government certifications and directed channels for access.

SPRMM1 DLA Mechanicsburg

POSTED

about 19 hours ago

DEADLINE

CABLE ASSEMBLY,SPECThis contract pertains to the repair of a CABLE ASSEMBLY,SPEC under solicitation N0010426QQC13, issued by the Naval Supply Systems Command Weapon Systems Support in Mechanicsburg, Pennsylvania. The government requires a Repair Turnaround Time (RTAT) of 730 days, measured from the physical receipt of the asset at the contractor’s facility as recorded in the Commercial Asset Visibility (CAV) system until Government acceptance. All repair work must adhere strictly to the original manufacturer’s specifications, drawings, and approved technical procedures, with compliance verified through Government Source Inspection. The contract mandates adherence to MIL-STD-130 for marking, MIL-STD-2073 for packaging, and prohibits any design, material, or part number substitutions without formal written approval from the contracting officer. The item is classified as a critical safety item, and cybersecurity maturity model certification is required. The contract explicitly states that all freight is FOB Origin and handled by the Navy under the CAV Statement of Work. The contract is issued under a Basic Ordering Agreement (BOA), with its terms incorporated by reference and overriding any conflicting provisions in this solicitation. Payment will be processed via Wide Area Workflow, and the contractor must submit a firm-fixed-price quote including unit and total pricing, RTAT, and confirmation of compliance with Buy American and Small Business Subcontracting Plan requirements. If the item has not been previously purchased by NAVSUP WSS or if pricing has increased substantially, the contractor must provide historical pricing data or comparable invoices. The Government intends to exercise an option for additional quantities within 365 days of award, at the same unit price. Contractors must be authorized distributors of the original manufacturer and provide proof of authorization. Records of all inspections and repairs must be retained for 365 days after final delivery, and any assets determined beyond repair (BR/BER) may qualify for negotiated testing and evaluation fees. The response deadline is August 17, 2026, and submission must include all required certifications, including those related to cybersecurity, security prohibitions, and annual representations.

Navsup Weapon Systems Support Mech

POSTED

about 19 hours ago

DEADLINE

in about 1 month

POWER SUPPLYThis solicitation seeks a Firm-Fixed Price procurement for a POWER SUPPLY used in the MK 78 Guided Missile Simulator, with the solicitation number N0010425QXC70 and a response deadline of July 31, 2026. The item must comply with MIL-STD-130 for unique identification and marking, and all supplies must be sourced from an authorized distributor or manufacturer, with proof of authorization required to be submitted with the quote. The contract mandates adherence to strict qualification standards, including DFARS 252.211-7003 for Item Unique Identification, and adherence to Buy American Act requirements. All packages must conform to MIL-STD-2073, and delivery is FOB Origin with Government Source Inspection required. The offer must include detailed pricing, delivery lead time, CAGE codes, profit breakdown, and a valid 90-day expiration date. The evaluation will prioritize price as the primary factor, followed by past performance and supplier risk as defined in DFARS 252.204-7024. The contractor is responsible for all quality control, inspection, and recordkeeping, with records required to be maintained for 365 days after final delivery. Any design, material, or part number changes require prior written approval from the Contracting Officer and must be classified under one of six documented change codes. Only electronic submissions via the designated Navy email are accepted, and any documentation provided by the Navy is subject to distribution restrictions as outlined in OPNAVINST 5510.1, including potential NOFORN or export-controlled status. The award will be bilateral, requiring formal contractor acceptance before execution, and no substitutions will be permitted without official authorization. The point of contact for the solicitation is Matthew Takach, with all correspondence directed to the designated Navy email address.

Navsup Weapon Systems Support Mech

POSTED

about 19 hours ago

DEADLINE

CONNECTOR,RECEPTACLThis contract pertains to the procurement of a specialized Receptacle Assembly connector designated as SPECIAL EMPHASIS material (Level I/SUBSAFE) for use in critical shipboard systems where failure could result in catastrophic consequences including loss of life or vessel. The item must conform strictly to MIL-DTL-24231, with specific requirements excluding underwater explosion testing and sealing plugs but mandating pressure-proof caps, traceable welding, and compliance with stringent material specifications such as QQ-N-281 for the receptacle body. First Article Testing is required and must be destructive, with one unit delivered to Portsmouth Naval Shipyard for government evaluation—samples are not counted toward the contract quantity. All materials must be traceable from raw stock through final assembly via unique heat-lot or traceability markings, with certifications rigorously documented and electronically signed, prohibiting disclaimers such as “to the best of our knowledge.” Quantitative chemical and mechanical analyses are required, and any process altering material properties necessitates re-certification with a new traceability identifier. Quality assurance is governed by ISO-9001 with supplemental requirements from ISO-10012 and ISO/IEC 17025, or alternatively MIL-I-45208 and MIL-STD-45662, and the contractor must maintain an auditable quality system available for government inspection at all times. Welding and brazing instructions are tightly controlled under S9074 series standards, requiring submitted and approved welding procedures and qualification data prior to any production, with additional oversight for titanium materials and hardfacing. All weld filler metals require certification of origin and conformity, and subcontractor activities carry the same obligations, with the prime contractor responsible for ensuring compliance down the supply chain. Certification documentation, including test reports and compliance certificates, must be submitted via Wide Area Work Flow (WAWF) to Portsmouth Naval Shipyard with designated DODAACs N50286 (ship to) and N39040 (inspect/accept), and no material may be shipped without prior written acceptance. The contract enforces Buy American, small business set-aside, and security exclusion clauses, and requires submission of engineering change proposals for any modifications affecting form, fit, function, or interface. Delivery is bound by a 365-day timeline from contract effective date, with certification data due 20 days prior to each shipment, and inspections must be performed on a zero-defect basis with 100%

Navsup Weapon Systems Support Mech

POSTED

about 19 hours ago

DEADLINE

in about 1 month

POWER SUPPLY UNINTEThis contract solicits the manufacture and delivery of a POWER SUPPLY UNINTE under solicitation number SPRMM126QKG30, issued by the Defense Logistics Agency (DLA) Mechanicsburg, with a response deadline of July 27, 2026. The product must conform strictly to NAVSEA drawing 7628734-3 Rev D and match the slide mounting hole configuration of IntelliPower drawing LY10382 Rev A, compatible with specific part numbers from Actron and Jonathan Engineering Solutions. The contractor is required to use the designated CAGE code 0UMT8 and reference number FA10382, and the item must be marked in accordance with MIL-STD-130 Rev N. All changes to design, material, or part number are strictly controlled and require prior written approval from the NAVICP-MECH Contracting Officer, with changes categorized by code and accompanied by supporting documentation. The contractor assumes full responsibility for inspection and quality assurance, maintaining records for 365 days after final delivery, and must utilize an approved quality system that ensures compliance even in the absence of explicit inspection clauses. Delivery and acceptance inspections are to occur at designated facilities to be specified, with final acceptance following packaging inspection. All items must be packaged per MIL-STD-2073, and electronic submission of the Invoice and Receiving Report (COMBO) via WAWF is mandatory. The solicitation requires that only authorized distributors of the original equipment manufacturer may respond, with proof of authorization submitted with the offer. Contractors must comply with cybersecurity certification, Federal Acquisition Supply Chain Security Act prohibitions, and the mandatory use of Workflow Pro's Assist Module. The contract prohibits unauthorized changes to production facilities without written approval and a $250 administrative fee, and prohibits any change that affects small business performance, delivery schedules, or FOB point. The government retains the right to inspect at any time and will not accept defective material even if sampled. All technical documents must be handled under the appropriate distribution statement, and vendors are required to register for PIEE EDA to receive contract notifications. The offer is valid for a period to be determined, and non-manufacturers must disclose the OEM name, CAGE code, and part number.

SPRMM1 DLA Mechanicsburg

POSTED

about 19 hours ago

DEADLINE

61--HEX RECT ASSY, IN REPAIR/MODIFICATION OFThis contract pertains to the repair and modification of the HEX RECT ASSY under a fixed-price arrangement, with all work required to meet precise technical and quality standards established by MIL-STD-129 for marking and MIL-STD-2073 for packaging. The contractor must adhere strictly to the original manufacturer's specifications, drawings, and approved repair procedures, and any modifications to design, materials, or part numbers require prior written approval from the NAVICP-MECH Contracting Officer, categorized under specific code systems detailing the nature of the change. The item must be free of metallic mercury and any contamination, with strict prohibitions on mercury use unless explicit written authorization is obtained, including detailed justification, protective measures, and mandatory warning plates if approved. The contractor is responsible for all inspections and testing, maintaining complete records for up to 365 days after final delivery, and the Government retains the right to conduct independent inspections. Compliance with Buy American provisions, small business subcontracting requirements, and safeguarding sensitive conventional arms and explosives is mandated, along with adherence to security prohibitions and the mandatory use of Workflow Pro (WFP) for payment and invoicing. The procurement is not set aside for small businesses, and all offers must include either firm-fixed-price or time-and-materials cost estimates for repairs. The contract is issued under Navy procurement system N00104, with deliveries governed by FOB destination terms and all contractual documents deemed issued upon electronic or mailed delivery. The requirement stems from a solicitation issued by the Naval Supply Systems Command Weapon Systems Support, Mechanicsburg, PA, with responses due by August 17, 2026, and all performance activities must align with Department of Defense standards, including the prohibition of foreign national access to classified documents unless explicitly certified.

Navsup Weapon Systems Support Mech

POSTED

about 19 hours ago

DEADLINE

in about 1 month

CONNECTOR, HULL INSThis contract pertains to the procurement of a Hull Insert Assembly designated as SPECIAL EMPHASIS material (Level I) for use in a critical shipboard system, where failure could result in catastrophic consequences including loss of life or the vessel itself. The item must conform to MIL-DTL-24231/25 with a specific modification requiring an outside diameter of 6.375 inches and must be manufactured from HY-80, Type B material as defined in T9074-BD-GIB-010/0300 Revision 2. Comprehensive quality assurance protocols are mandated, including mandatory First Article Testing, submission and approval of a Process Control Plan and Qualification Plan prior to production, and strict traceability from raw material through final assembly using unique heat-lot or traceability markings. All certifications must be permanently documented with electronic or handwritten signatures and must unqualifiedly affirm compliance with all specifications. Non-destructive testing—including magnetic particle, dye penetrant, and ultrasonic inspections—must be performed according to specific standards, and welding procedures must be qualified under S9074-AQ-GIB-010/248 and T9074-AD-GIB-010/1688, with full qualification data submitted for review before any welding occurs. Consumed weld filler metal requires individual certification and traceability. The contract requires full compliance with ISO-9001 and either ISO-10012 or ANSI-Z540.3 with ISO-17025 for quality systems, with government inspections conducted at source. All material and component certifications must be submitted via Wide Area Work Flow (WAWF) with specific shipping, inspecting, and accepting DODAACs updated to N50286 and N39040, respectively, and notifications sent to PORT_PTNH_WAWF_NOTIFICATION@NAVY.MIL. No material may be shipped without prior electronic acceptance. Delivery of the final product is due no later than 365 days after contract effective date, with strict deadlines for submission of weld procedures, first article test reports, and certification data. The contract operates under Emergency Acquisition Flexibilities and is a DO-rated order under the Defense Priorities and Allocations System. It is a total small business set-aside, subject to Buy American requirements, and includes prohibitions on mercury, unauthorized marking, and unapproved deviations. All subcontractor requirements flow down, and the prime contractor

Navsup Weapon Systems Support Mech

POSTED

about 19 hours ago

DEADLINE

POWER SUPPLY ASSEMBThe contract is for a POWER SUPPLY ASSEMBLY solicitation issued under Emergency Acquisition Flexibilities authority, with the solicitation number SPRPA126QXB56 and a response deadline of August 3, 2026. It is managed by the Department of Defense’s Defense Logistics Agency Aviation at Philadelphia, with Lawrence Eaddy as the primary point of contact. The NAICS code 335931 applies, classifying it under a small business size standard of 600 employees. No drawings are available, and the requirement is for supplies of a noncomplex nature, carrying a 365-day warranty with a 45-day window to report defects after discovery. Contractual obligations include compliance with ISO9001 quality standards, mandatory use of Workflow Pro’s Assist Module, and adherence to Buy American and Free Trade Agreements certifications. Security prohibitions, equal opportunity for workers with disabilities, and royalty information clauses are also incorporated. Payment instructions rely on a combined invoice and receiving report via Wide Area Workflow, with Treasury account information marked as TBD. The contract also includes a priority rating notice for national defense and emergency preparedness purposes, and special representations and certifications are required under deviation provisions effective February 2026.

Pa DLA Aviation At Philadelphia

POSTED

about 19 hours ago

DEADLINE

Supply of Shielding Gaskets for Aviation Electronics

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Supply of Cartridge Fuses (NSN 5920-01-622-4501)The contract calls for the procurement and delivery of 338 units of cartridge fuses with military-specification compliance, specifically identified by NSN 5920-01-622-4501, adhering to all technical and packaging standards set by the Defense Logistics Agency. These fuses must meet exacting military performance criteria to ensure reliability and interoperability within defense systems, and the supplier is required to fulfill all packaging and labeling directives to support logistics and field deployment. The procurement is structured as a subcontract under the NAICS code 335931 for other electrical equipment and component manufacturing, with performance delivery targeted to the designated location in New Cumberland, Pennsylvania, ZIP code 17070-5002. The solicitation was posted on July 16, 2026, with a mandatory response deadline of July 27, 2026, indicating a tight timeline for interested parties to submit proposals. The contracting activity falls under the Active Devices Division of the Department of Defense, and while no set-aside classification or point of contact is specified, the requirement is publicly accessible via the DIBBS platform. All proposals must fully address technical compliance, delivery scheduling, and packaging specifications to be considered valid, with failure to meet any requirement potentially resulting in disqualification. The contract underscores the importance of precision manufacturing and strict adherence to defense logistics protocols.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

Government First Article Inspection and TestingThe contract requires the performance of a first article inspection and testing on an aircraft structural fitting to ensure full compliance with drawing 7574876. This includes detailed dimensional measurements, verification of material specifications, non-destructive testing, and the preparation of a formal inspection report. All work must demonstrate adherence to the technical requirements outlined in the drawing and meet applicable quality standards for aerospace components. The effort is designated as a subcontract under a Total Small Business Set-Aside, meaning only small businesses can bid, and it is classified under NAICS code 541330, which pertains to engineering services. The solicitation was posted by the ASC Commodities Division of the Department of Defense and is open for response until July 27, 2026, with no specific location provided for performance.

Engineering Services

POSTED

about 14 hours ago

DEADLINE

Precision Manufacturing of Aircraft Structural FittingThe contract involves the precision manufacture of a critical safety aircraft structural fitting identified by Part Number S03-02-R-100, following the specifications outlined in drawing 7574876. The scope encompasses full production lifecycle activities including material sourcing, machining, heat treatment, and surface finishing, all required to meet stringent aerospace industry standards for structural integrity, durability, and safety compliance. All work must be performed in accordance with applicable aerospace quality and inspection protocols to ensure the component meets mission-critical performance requirements. This is a total small business set-aside under the SBA program as defined by FAR 19.5, with the NAICS code 332312 classifying it under forge and stamping manufacturing. The contract is issued under the Department of Defense’s ASC Commodities Division and is structured as a subcontract. Proposals must be submitted by the deadline of July 27, 2026, with the solicitation published on July 17, 2026. All manufacturing activities are expected to adhere to defense supply chain requirements, and the place of performance is not specified, implying flexibility as long as compliance and delivery obligations are met.

Fabricated Structural Metal Manufacturing

POSTED

about 14 hours ago

DEADLINE

Quality Assurance and Inspection at OriginThe contract titled Quality Assurance and Inspection at Origin requires the contractor to perform inspection and acceptance of supplies at the point of production or packaging, in strict adherence to contract clause 52.246-9008. This work is designated as a subcontract under a Total Small Business Set-Aside, meaning only small businesses are eligible to participate as defined by the SBA and FAR 19.5. The NAICS code 541330 identifies the scope as ranging within architectural, engineering, and related services, indicating the nature of the quality assurance activities involves technical oversight and compliance evaluation rather than direct manufacturing. The solicitation was posted on July 17, 2026, with a response deadline of July 27, 2026, and is managed by the ASC Commodities Division within the Department of Defense, though specific point of contact and place of performance details are not provided. The contract emphasizes the importance of ensuring supplies meet required standards prior to shipment, with inspections conducted directly at the origin, which may include facilities across various locations. Compliance with the referenced clause mandates adherence to federal procurement quality assurance procedures, requiring detailed documentation, evaluation criteria, and acceptance protocols to be followed during inspection. The absence of explicit location or contact information suggests the contractor must be prepared to perform at any production or packaging site tied to the supply chain, and the lack of defined city or state for performance implies a potentially nationwide scope requiring logistical flexibility and readiness to deploy inspection personnel as needed. The contract is accessible through the DIBBS portal for further procedural details.

Engineering Services

POSTED

about 14 hours ago

DEADLINE

ITAR/EAR Compliance and Export-Controlled Data HandlingThe contract mandates strict compliance with ITAR and EAR regulations for all suppliers and subcontractors handling export-controlled technical data, ensuring that only authorized entities with proper registration and documentation are engaged in work involving sensitive information. All parties must demonstrate adherence to U.S. export control laws as a condition of participation, with failure to comply potentially resulting in termination or penalties. The solicitation is designated as a Total Small Business Set-Aside under the SBA program, restricting eligibility to small businesses as defined by the NAICS code 541611, which pertains to management consulting services. The award is issued by the ASC Commodities Division under the Department of Defense, with responses due by July 27, 2026, and performance expected to occur under the terms of a subcontract agreement. Participation requires proactive verification of regulatory standing and ongoing compliance monitoring for the duration of the contract.

Administrative Management and General Management Consulting Services

POSTED

about 14 hours ago

DEADLINE

Subcontracting Plan Compliance and Small Business OutreachThe contract requires the development and execution of a federal subcontracting plan designed to ensure compliance with Department of Defense regulations and Small Business Administration guidelines for maximizing participation by disadvantaged, minority, and women-owned businesses. The goal is to meet specific targets for DBE, MBE, and WBE subcontracting as mandated by the Federal Acquisition Regulation and SBA rules, with all activities aligned to a total small business set-aside under FAR 19.5. The work focuses on strategic outreach, monitoring, documentation, and reporting to demonstrate consistent adherence to small business utilization standards throughout the contract performance period. The solicitation, issued under NAICS code 541611 for management consulting services, is administered by the ASC Commodities Division within the Department of Defense and is open for response through July 27, 2026. All subcontracting efforts must be structured to promote equitable access and measurable outcomes for certified small, minority, and women-owned businesses, with full transparency and accountability required in tracking participation. The successful contractor will be responsible for designing, implementing, and sustaining a comprehensive subcontracting strategy that aligns with federal obligations and supports the agency's commitment to small business procurement goals.

Administrative Management and General Management Consulting Services

POSTED

about 14 hours ago

DEADLINE

Critical Safety Item (CSI) Manufacturing and SupplyThe contract involves the manufacture and delivery of Critical Safety Items specified by the U.S. Navy, with stringent requirements for sourcing controls, component traceability, and full compliance with defense-specific technical and quality standards. These items are essential to mission-critical systems and must be produced under strict regulatory oversight to ensure reliability and safety throughout their lifecycle. The procurement is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the Small Business Administration are eligible to respond, and the NAICS code 332999 indicates the work falls under other fabricated metal product manufacturing. All production and delivery activities must adhere to military specifications, and suppliers are expected to implement robust documentation and audit-ready tracking systems for every component and process step. The solicitation was posted on July 17, 2026, with a deadline for responses on July 27, 2026, and is managed by the ASC Commodities Division under the Department of Defense. There is no specified place of performance, suggesting flexibility in manufacturing locations provided all requirements are met, and no point of contact is listed, implying inquiries must be directed through the official DIBBS portal referenced in the link. The nature of the work demands a high level of precision and accountability, with failure to meet traceability or compliance standards likely resulting in disqualification or contract termination. Suppliers must be prepared to demonstrate proven capability in handling sensitive defense components and maintaining data integrity across the supply chain.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 14 hours ago

DEADLINE

Quality Inspection and Product Verification TestingThe contract requires the performance of in-process and final inspections on bushing assemblies in accordance with MIL-STD-1916 or ASQ H1331 standards, ensuring compliance with rigorous quality and verification protocols. The contractor is responsible for generating accurate test reports and providing full support to Government acceptance activities, demonstrating consistent adherence to defense-grade quality requirements throughout the production lifecycle. This work is critical to validating the integrity and functionality of components used in defense systems. This is a small business set-aside subcontract under the SBA program, classified under NAICS code 541330, and issued by the ASC Commodities Division of the Department of Defense. The solicitation was posted on July 17, 2026, with a response deadline of July 27, 2026. While specific location details are not provided, the place of performance is tied to defense operations under the DLA umbrella, and all submissions must be made through the designated DIBBS portal. The contract emphasizes the need for qualified small business entities capable of delivering precise inspection services under strict military specifications.

Engineering Services

POSTED

about 14 hours ago

DEADLINE

Domestic and International Freight Logistics (U.S.-Flag Vessel Compliance)The contract requires the arrangement of domestic and international freight logistics for the shipment of bushing assemblies to locations within the continental United States, with strict adherence to U.S.-flag vessel requirements mandated by the Cargo Preference Act for all ocean freight portions. This ensures compliance with federal regulations that prioritize the use of American-owned and flagged vessels for the transportation of government cargo. The solicitation is structured as a subcontract under a Total Small Business Set-Aside designation, exclusively available to small businesses certified by the Small Business Administration, and is classified under NAICS code 483112, which pertains to foreign ocean transportation. The opportunity was posted on July 17, 2026, with a response deadline of July 27, 2026, and is overseen by the ASC Commodities Division of the Department of Defense, with performance tied to U.S. domestic destinations. The requirement emphasizes logistical precision, regulatory compliance, and small business participation in fulfilling defense-related supply chain needs.

Deep Sea Passenger Transportation

POSTED

about 14 hours ago

DEADLINE

Supply Chain Traceability and Documentation ManagementThe contract requires the maintenance of fully auditable records to ensure complete traceability of material origin, certifications, inspections, and adherence to all Government traceability mandates, specifically in compliance with DFARS requirements. All documentation must support transparency and accountability throughout the supply chain, enabling verification of source materials and compliance with defense contracting standards. The contractor must implement systems and procedures capable of sustaining rigorous audit readiness and meeting every contractual obligation related to documentation integrity and regulatory compliance. This is a small business total set-aside subcontract under NAICS code 541611, issued by the Department of Defense’s ASC Commodities Division. Responses are due by July 27, 2026, and performance is expected to align with federal defense supply chain protocols. The contract emphasizes strict adherence to traceability standards and requires proven capability in managing complex documentation systems under federal oversight. While specific location details are not provided, all work must satisfy DoD requirements for origin verification and material accountability.

Administrative Management and General Management Consulting Services

POSTED

about 14 hours ago

DEADLINE

Packaging, Marking, and Labeling ServicesThe contract seeks qualified small businesses to provide military-compliant packaging, preservation, and labeling services for bushing assemblies, adhering strictly to DLA and MIL-STD-129 standards. Essential requirements include accurate barcode application, application of special handling labels, and full compliance with defense logistics protocols to ensure traceability, durability, and readiness for military distribution. The work must be performed in accordance with federal regulations governing packaging integrity and labeling accuracy to support the Department of Defense’s supply chain standards. This is a total small business set-aside under NAICS code 493190, restricted exclusively to small businesses as defined by the SBA, and is issued as a subcontract by the ASC Commodities Division within the Department of Defense. Responses are due by July 27, 2026, with the solicitation posted on July 17, 2026, and all work expected to align with DLA’s logistical demands for defense components. The place of performance and point of contact details are not specified, but all proposals must demonstrate readiness to meet stringent military packaging and documentation requirements without deviation.

Other Warehousing and Storage

POSTED

about 14 hours ago

DEADLINE

Precision Machining of Bushing Assembly (NSN 5365-01-541-2220)The contract pertains to the manufacture and delivery of precision bushing assemblies identified by NSN 5365-01-541-2220, requiring strict adherence to military specifications throughout production. Work includes CNC machining to exact tolerances, comprehensive inspection processes, and full compliance with traceability and packaging standards mandated for defense applications. The contract is structured as a subcontract under a total small business set-aside, reserved exclusively for small businesses as defined by the SBA under FAR 19.5, with the NAICS code 332710 applicable to forged and stamped metal product manufacturing. The opportunity was posted on July 17, 2026, with responses due by July 27, 2026, and is issued by the ASC Commodities Division under the Department of Defense. Performance is expected to occur at an undefined location, and all deliverables must meet federal defense supply chain requirements, ensuring readiness for military use.

POSTED

about 14 hours ago

DEADLINE