Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Specialized Casting and Forging for Shuttle Valve

Active

Federal

Response Deadline10/23/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract, titled Specialized Casting and Forging for Shuttle Valve, involves the initial shaping of valve bodies for prime contractors supporting DLA Weapons Support Maritime Hardware projects. The selected provider will create molds or dies based on reference drawing 16236 EI-017137337 to produce rough-cast or forged valve blanks. All work must be performed in compliance with TDP Rev C Gen 4 and utilize materials that meet MIL-DTL-19068B standards. The project is managed by the Department of Defense through Depot Oklahoma, with the place of performance located at Tinker AFB. Contractors must strictly adhere to the Buy American Act and Berry Amendment restrictions. The solicitation was posted on October 12, 2026, with a response deadline of October 23, 2026, falling under NAICS code 333511.

General Info

Subcontract for casting and forging shuttle valve bodies per MIL-DTL-19068B for Tinker AFB.

Agency

Department Of Defense → DEPOT OKLAHOMA

NAICS

333511 - Industrial Mold Manufacturing

Place of Performance

TINKER AFB, OK, 73145-8000, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7MC-27-T-0658.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

VALVE, SHUTTLE

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 12

subcontract

Response DeadlineOct 23

Submission deadline

Response Deadline

10/23/2026, 05:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DEPOT OKLAHOMA

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DEPOT OKLAHOMA

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs initial shaping of valve bodies for prime contractors on DLA Weapons Support Maritime Hardware projects. Creates molds or dies based on reference drawing 16236 EI-017137337 to cast or forge raw valve blanks. Utilizes materials compliant with MIL-DTL-19068B and adheres to Buy American Act and Berry Amendment restrictions. Compliance with TDP Rev C Gen 4 required. Delivers rough-cast or forged valve blanks.

Similar Contracts

Same NAICS industry code

O-Ring Manufacturer (NSN 5331-01-564-2757)This subcontract involves the manufacture and supply of 71 O-rings specifically designed to meet NSN 5331-01-564-2757 dimensions and material specifications. The contractor is responsible for fabricating these components using industrial elastomer molding or machining, ensuring that all parts are asbestos-free. Strict adherence to the Berry Amendment and the Buy American Act is required for this procurement. The finished products must be packaged and marked in accordance with MIL-STD-2073-1E and MIL-STD-129 standards. Once completed, the 71 O-rings are to be delivered to DLA Distribution Barstow. This effort supports the DLA Weapons Support Land Supply Chain under the Department of Defense, with a response deadline set for October 26, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Casting and Forging Services for Clevis ComponentsThis subcontract involves providing raw cast or forged metal blanks for prime contractors supporting the DLA Weapons Support Land Supply Chain. The scope of work focuses on producing initial forms for part number 153C5464P1 utilizing custom molds or dies, with the final delivery consisting of certified metal blanks ready for machining. Performance for this contract is centered at Tinker AFB. Strict quality and regulatory standards apply, requiring full material certifications and mill test reports for all Critical Application Items. Additionally, the provider must ensure full compliance with the Buy American Act and the Berry Amendment. The solicitation was posted on October 12, 2026, with a response deadline of October 23, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

SLEEVE, HOUSING, HEAD

Solicitation # SPE4A7-27-T-0528

Solicitation SPE4A7-27-T-0528 is a total small business set-aside fixed-price contract issued by the Defense Logistics Agency for the procurement of 378 units of Sleeve, Housing, Head (NSN 1615004047603), also identified as a pitch varying housing. The item is designated as a critical application item with approved sources including Chicago Rawhide Mfg. Co and SKF USA Inc. Delivery is required by November 20, 2027, with a need ship date of February 10, 2027, and is established as FOB Origin. Inspection and acceptance will occur at the destination, with sampling conducted per MIL-STD-1916, ASQ H1331, or a comparable zero-based sampling plan. The contract mandates strict adherence to DLA Master List technical and quality requirements, including CMMC Level 2 self-assessment and specific packaging standards such as ASTM D3951 and MIL-STD-129. Palletization must comply with RP001. Invoicing and payment are to be processed electronically through the Wide Area WorkFlow system. Compliance with the Buy American Act, Berry Amendment, and various DFARS regulations regarding covered defense telecommunications and hazardous materials is required. The procurement falls under NAICS code 333511 and requires the contractor to maintain registration in the System for Award Management.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Precision "Quiet Gear" Fabrication and FinishingThis subcontract involves the fabrication and finishing of precision quiet gears for the Department of Defense, specifically supporting DLA Weapons Support Land Supplier Opns Engines. The scope of work includes precision gear cutting, grinding, polishing, and heat treatment to ensure noise reduction and durability for NSN 2990-01-122-7913 assemblies. Performance will take place in New Cumberland, Pennsylvania, and requires the use of CNC gear cutters. To qualify, the contractor must maintain compliance with SAE AS9003 or ISO 9001 standards and adhere to zero-based sampling protocols per MIL-STD-1916 or ASQ H1331. The final deliverable consists of finished quiet gears. The solicitation was posted on October 7, 2026, with a response deadline of October 19, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS ENGINES

POSTED

DEADLINE

Casting and Forging of Turbocharger Thrust Collar BlanksThis subcontract involves the initial forming of turbocharger thrust collar blanks for the Department of Defense under the DLA Weapons Support Land Supplier Opns Engines agency. The selected contractor will utilize industrial furnaces or forging presses and custom dies to execute casting or forging processes for NSN 2990-00-036-7087, ensuring all material specifications are met. The final deliverables are cast or forged metal blanks prepared for precision machining, with a strict prohibition on the use of additive manufacturing. The project is categorized under NAICS code 333511 and requires strict adherence to NIST SP 800-171 cybersecurity standards. Performance of the contract will take place in New Cumberland, Pennsylvania. Interested parties must respond by October 19, 2026, regarding this requirement posted on October 7, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS ENGINES

POSTED

DEADLINE

Supply of Cutter Bit, Tool Hol (NIIN: 014653587)This subcontract, issued by the Department of the Navy's Navsup Weapon Systems Support Mech, involves the supply of a specific cutter bit identified by NIIN 014653587 for use in US Navy hardware acquisitions. The selected provider is responsible for manufacturing or sourcing the bit in strict accordance with Individual Repair Part Ordering Data, technical drawings, and specified revision levels. To ensure quality, the production must utilize precision machining equipment and adhere to MIL-I-45208 higher-level quality standards, with final inspection and acceptance occurring at the point of origin. The opportunity is categorized under NAICS code 333511 and is designated as an SBA set-aside. Performance of the contract is centered in Mechanicsburg, Pennsylvania. Interested parties must submit their responses by the deadline of October 19, 2026, following the posting date of September 18, 2026.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Aerospace Manufacturing Aids and Tooling SupplyThis subcontract for Aerospace Manufacturing Aids and Tooling Supply supports prime contractors on NAVSUP WSS aircraft component projects. The scope involves the design and fabrication of custom jigs, dies, fixtures, patterns, and mylars used for shaping aircraft components, as well as the provision of specialized test equipment for aerospace validation. All deliverables must be produced using high-precision machining tools and aerospace-grade materials to meet the specific technical drawings and requirements outlined in the prime contract. The project is managed by the Department of the Navy under the Navsup Weapon Systems Support agency, with performance taking place in Philadelphia. Interested parties must submit responses by October 16, 2026, for this opportunity categorized under NAICS code 333511.

Navsup Weapon Systems Support

POSTED

about 1 month ago

DEADLINE

in about 8 hours

Supply of Precision Cutting Tools and Tooling for CNC MachiningThis subcontract, managed by the Defense Logistics Agency under the Department of Defense, focuses on the supply of high-precision cutting tools, inserts, and custom tooling. These materials are specifically designated for use in CNC lathe and mill operations to support the manufacturing of defense components. The contract falls under NAICS code 333511 and was posted on August 17, 2026. It ensures the availability of specialized machining equipment necessary for high-tolerance production within the defense industrial base.

Defense Logistics Agency

POSTED

about 2 months ago

DEADLINE

Precision Molding and Tooling ServicesThe contract entails the design, fabrication, and ongoing maintenance of precision molds specifically for the production of elastomeric boots used in defense applications. This involves advanced CNC machining to achieve tight tolerances and consistent quality for low-volume, high-reliability components critical to military equipment. The work requires rigorous quality assurance protocols to ensure each mold meets exacting specifications and performs reliably under demanding operational conditions. The contractor will support the Department of Defense through the Defense Logistics Agency, operating under a subcontract arrangement with NAICS code 333511, which classifies the activity as machinery manufacturing for industrial use. The contract was posted in 2026 and is tied to a specific delivery order under the broader SPE4A125G0009 procurement, indicating its integration into a larger defense supply initiative. Performance is expected to align with defense standards regardless of the unlisted place of performance or point of contact, with all work centered on delivering mission-critical tooling for specialized elastomeric parts.

Defense Logistics Agency

POSTED

DEADLINE

Precision Machine Tool Re-Grinding ServicesPrecision machine tool re-grinding services are being procured to restore the tapered bore of the headstock spindle on an MTR FSN shaft lathe at Portsmouth Naval Shipyard. The work requires in-place re-grinding to bring the spindle back to precise operational tolerances after wear or misalignment was identified during disassembly, ensuring the lathe’s continued accuracy and reliability for critical naval applications. The contract is classified as a subcontract under NAICS code 333511 and is performance-based at the shipyard’s facility in Kittery, Maine, with a ZIP code of 03904. The solicitation was posted on April 28, 2026, under the Department of Defense, and all work must be completed in situ to maintain alignment integrity and minimize equipment downtime.

Portsmouth Naval Shipyard Gf

POSTED

DEADLINE

More opportunities from Department Of Defense → DEPOT OKLAHOMA

Same awarding agency

CASE, LIFE RAFT

Solicitation # SPE8E5-27-Q-0019

POSTED

about 17 hours ago

DEADLINE

BATTERY, NONRECHARGEABL

Solicitation # SPE7L7-27-T-0277

Solicitation SPE7L7-27-T-0277 is for the procurement of 3,759 nonrechargeable Lithium/Manganese Dioxide, Sealed 3.1 Volt batteries, identified by NSN 6135-01-340-7883. The contract requires strict adherence to controlling reference specification 12255 6092PS079 and associated drawings for all material and dimensional requirements. Key quality mandates include First Article Testing (FAT) and Production Lot Testing (PLT). For the FAT, the contractor must deliver 100 units within 90 calendar days to the Naval Surface Weapons Center, Crane Division. The government has allocated $45,000.00 for testing costs, which will be factored into the evaluation of offers. The items are classified as critical application items with a non-extendable shelf life of 60 months. Delivery is FOB Destination to the DLA Distribution Depot Oklahoma at Tinker AFB. Compliance with various military standards is mandatory, including MIL-STD-129 for marking, MIL-STD-130N for identification, and MIL-STD-2073-1E for packaging. Because the batteries are hazardous materials, the contractor must provide MSDS/PSDS per FED-STD-313 and ensure labeling conforms to the Hazard Communication Standard and IP025. Inspection and acceptance will occur at the point of origin. The solicitation is open to full and open competition, with specific price evaluation preferences available for certified HUBZone small business concerns.

Battery Manufacturing

POSTED

about 17 hours ago

DEADLINE

MIL-SPEC Packaging and Palletization ServicesThis subcontract for MIL-SPEC Packaging and Palletization Services involves providing military-grade packaging for prime contractors supporting DLA Troop Support equipment contracts. The scope of work requires the packaging of 58 units in accordance with MIL-STD-2073-1E, marking per MIL-STD-129, and palletization per RP001. To meet specific packaging data requirements, including QUP:001 and Pres Mthd:10, the provider must utilize MIL-SPEC crates, moisture barriers, and industrial labeling equipment to ensure all units are ready for FOB Origin shipment. The project is managed by the Department of Defense through Depot Oklahoma and will be performed at Tinker AFB. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 488510. Interested parties must respond by October 26, 2026.

Freight Transportation Arrangement

POSTED

DEADLINE

Ion Exchange Resin and Media SupplyThis subcontract opportunity, managed by the Department of Defense for Depot Oklahoma, involves the supply of specialized ion exchange resins for prime contractors working on DLA Troop Support water purification projects. The required materials include high-purity cationic and anionic resins that must strictly adhere to NSN 4610-01-313-6086 specifications. Deliverables may be provided as bulk or pre-measured resin media, and the supplier is required to provide certificates of analysis regarding purity and capacity, as well as Safety Data Sheets in compliance with FAR 52.223-3. The project is designated as a Total Small Business Set-Aside under NAICS code 325180, with the place of performance located at Tinker AFB. Interested parties must submit their responses by October 26, 2026.

Other Basic Inorganic Chemical Manufacturing

POSTED

DEADLINE

Ion Exchange Water Demineralizer ManufacturingThis subcontract, issued by the Department of Defense for Depot Oklahoma, involves the manufacture and supply of 58 ion exchange water demineralizer units for prime contractors on DLA Troop Support projects. The scope of work includes the fabrication of vessels and internal components, the integration of ion exchange resins, and strict adherence to RA001 technical and quality requirements as specified in the DLA Master List. Additionally, the contractor must ensure a 60-month shelf life for the units and provide all necessary Source Approval Request documentation. The project is designated as a Total Small Business Set-Aside under NAICS code 333310, with performance taking place at Tinker AFB. Interested parties must have responded by the deadline of October 26, 2026. The contract emphasizes rigorous testing and compliance to meet the specific operational standards required for military water demineralization systems.

Commercial and Service Industry Machinery Manufacturing

POSTED

DEADLINE

Manufacture and Supply of Solid Rubber SheetsThis subcontract involves the manufacture and supply of 192 solid rubber sheets under NSN 9320-01-354-4428 for prime contractors supporting Department of Defense supply contracts. The work is managed by Depot Oklahoma and will be performed at Tinker AFB. All materials must be produced according to Basic CID A-A-59588B Rev B and must be certified as both asbestos-free and mercury-free. Strict compliance is required for marking and packaging, with items marked every three feet per MIL-STD-190 and MIL-STD-130N and packaged in accordance with ASTM D3951 and RP001. The solicitation was posted on October 14, 2026, with a response deadline of October 26, 2026, falling under NAICS code 326299.

All Other Rubber Product Manufacturing

POSTED

DEADLINE

Electric Soldering Iron Heating Unit SupplierThis subcontract involves the supply of 46 electric soldering iron heating units for prime contractors supporting Department of Defense contracts via Depot Oklahoma. The supplier is responsible for manufacturing or sourcing units that strictly adhere to NSN 3439015678016 specifications, with a specific prohibition against the intentional addition of mercury. All deliverables must be packaged and marked in accordance with MIL-STD-2073-1E, MIL-STD-129, and RP001 standards, with delivery terms set as FOB Origin. The agreement requires full compliance with DLA quality requirements and DFARS regulations regarding the safeguarding of covered defense information. Performance is centered at Tinker AFB, and the contract falls under NAICS code 332216. Interested parties must meet the response deadline of October 26, 2026.

Saw Blade and Handtool Manufacturing

POSTED

DEADLINE

Aluminum Alloy 6061 T-6 Bar SupplyThis subcontract involves the supply of 178 feet of round, cold-finished aluminum alloy 6061 T-6 metal bars to support prime contractors for Department of Defense DLA supply contracts. The required materials must be 1.625 inches in diameter and provided in lengths of 10 to 12 feet. All bars must strictly adhere to SAE AMS4117M, ASTM B660, and ASTM B666/B666M-20 standards, and the supplier must provide Mill-Material Certification and maintain a QSLD listing. Logistical requirements specify that packaging must comply with MIL-STD-2073-1E and MIL-STD-129. The materials are to be delivered FOB Origin to Tinker AFB in Oklahoma. This procurement falls under NAICS code 332112 and is managed by Depot Oklahoma.

Nonferrous Forging

POSTED

DEADLINE

Aircraft Cockpit Light Manufacturing and SupplyThis subcontract involves the manufacturing and supply of 97 aircraft cockpit light units, specifically NSN 6220-01-6516453, for prime contractors under Department of Defense DLA supply contracts. The contractor is responsible for producing or sourcing part number 721-1237-1028 in strict accordance with Hoffman Engineering specifications. Performance will take place at Tinker AFB, falling under NAICS code 334516. The agreement mandates rigorous adherence to technical and quality standards, including the DLA Master List of Technical and Quality Requirements and Covered Defense Information protocols. All deliverables must be marked according to MIL-STD-129 and packaged following RP001 and ASTM D3951 guidelines to ensure compliance with agency regulations.

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE

Carbon Steel Sheet Supplier (NSN 9515008463355)This subcontract involves the supply of precision-cut carbon steel sheets for prime contractors supporting Department of Defense projects at the DLA Distribution Depot Oklahoma located at Tinker AFB. The requirement specifies six sheets of COMP 1020 or COMP 1025 carbon steel featuring a cold finish and annealing, with precise dimensions of 0.063 inches in thickness, 36 inches in width, and 96 inches in length. To be eligible, suppliers must maintain a QSDL listing for FSGs 95 and 96 and ensure full compliance with the Buy American Act. Deliverables must include waterproof marking and official Mill-Material Certification. The solicitation was posted on October 14, 2026, with a response deadline of October 26, 2026, under NAICS code 331221.

Rolled Steel Shape Manufacturing

POSTED

DEADLINE

Carbide End Milling Cutter SupplierThis subcontract involves the supply of precision-manufactured carbide end milling cutters to prime contractors supporting DLA supply contracts for Depot Oklahoma. The required components are single end, multi-flute, right-hand cut ball end cutters featuring a 0.312 inch diameter and a 2.500 inch overall length. All deliverables must be shipped FOB Origin and strictly adhere to ASTM D3951 packaging standards and MIL-STD-129 marking requirements. The contract is managed under NAICS code 333515 for the Department of Defense, with the place of performance located at Tinker AFB. Interested parties must note the response deadline of October 26, 2026.

Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

DEADLINE

Supply of Dehydrator Cartridges (NSN 4440-01-543-3575)This subcontract involves the manufacture or procurement of 49 dehydrator cartridges under NSN 4440-01-543-3575 to support prime contractors delivering DLA supply contracts. The items must be produced according to Lockheed Martin part number 79750560 and applicable Source Control Drawings. Strict adherence to ESD-safe handling and packaging is required in accordance with Special Marking Code 39 and MIL-STD-2073-1E. Eligible providers must be an approved source or hold OEM source approval from Lockheed Martin, specifically referencing CAGE code 08992. The performance of this contract is centered at Tinker AFB, with the Department of Defense Depot Oklahoma serving as the agency. The response deadline for this requirement is October 26, 2026.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS