Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Specialized Casting or Forging Supply

Active

Federal

Response Deadline10/21/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the supply of raw cast or forged metal blanks for twelve sleeve bushings to support prime contractors on DLA Weapons Support ASC projects. The contractor is responsible for producing these blanks to near-net shape in strict accordance with Eaton Aerospace 409B194 specifications. To ensure metallurgical compliance, the provider must submit all necessary mill test reports and material certifications. The project is managed under the Department of Defense and requires full compliance with the Buy American Act. Performance of the contract will take place in San Diego, California, under NAICS code 331528. Interested parties must adhere to the established timeline, with the response deadline set for October 21, 2026.

General Info

Supply twelve metal sleeve bushing blanks per Eaton specifications for DLA Weapons Support.

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

NAICS

331528 - Other Nonferrous Foundries (except Die-Casting)

Place of Performance

SAN DIEGO, CA, 92136-3581, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A6-27-T-4000.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

BUSHING, SLEEVE

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 13

subcontract

Response DeadlineOct 21

Submission deadline

Response Deadline

10/21/2026, 05:00:00 PM UTCin 5 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies raw cast or forged blanks for prime contractors on DLA Weapons Support ASC projects. Performs casting or forging of metal blanks to near-net shape per Eaton Aerospace 409B194 specifications. Provides mill test reports and material certifications to ensure metallurgical compliance. Requires Buy American Act compliance. Delivers raw cast or forged blanks for 12 sleeve bushings.

Similar Contracts

Same NAICS industry code

Nickel Aluminum Bronze Casting for Swivel AdaptersThis subcontract involves the production of 37 cast Nickel Aluminum Bronze adapter blanks for the DLA Weapons Support Fluid Handling Division. The scope of work requires the fabrication of custom tooling and the use of a specialized metal casting process to form adapter bodies, specifically ensuring that all flanges are manufactured with 12 bolt holes. Performance of this contract must strictly adhere to MIL-DTL-24787/1A specifications, the Buy American Act, and the Berry Amendment. The work is designated to be performed in San Diego, California, under NAICS code 331528.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Aerospace Grade Forging and Casting ServicesThe Aerospace Grade Forging and Casting Services subcontract involves the initial shaping of metal blanks for prime contractors supporting DLA Weapons Support ASC projects. The scope of work includes casting or forging high-strength alloys into near-net shapes for pin-rivets, ensuring full material traceability to approved sources. Additionally, the provider must perform necessary heat treatment and metallurgical testing for critical applications to deliver blanks ready for final machining. This contract is managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division, with performance taking place at Robins Air Force Base. A critical requirement for this engagement is strict compliance with the Berry Amendment regarding domestic sourcing. Interested parties should note the response deadline of October 20, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Aerospace Casting and Forging ServicesThis subcontract for Aerospace Casting and Forging Services involves the supply of raw cast or forged metal components for prime contractors supporting DLA Weapons Support ASC projects. The selected provider must cast or forge metal parts to the specific dimensions and material grades outlined in the Technical Data Package and provide necessary material certifications to maintain compliance with the Berry Amendment and the Buy American Act. Due to the nature of the export-controlled drawings, JCP certification is a mandatory requirement for access. The opportunity is a total small business set-aside under NAICS code 331528, managed by the Department of Defense. Performance will take place in Texarkana, Texas. Interested parties must submit their responses by October 20, 2026, to provide the required metal blanks as specified in the contract requirements.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Aerospace Metal Casting and Tooling SupplyThe Aerospace Metal Casting and Tooling Supply subcontract involves the design and manufacture of casting molds and raw metal components for aircraft door projects under the DLA Weapons Support ASC. The selected provider will be responsible for producing precision tooling and metal castings that strictly adhere to provided technical drawings to support prime contractors. To be eligible, the contractor must maintain JCP certification to access necessary technical data and ensure full compliance with DFARS specialty metals restrictions. This Department of Defense requirement falls under NAICS code 331528, with a response deadline set for October 20, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Aerospace Forging and Casting ServicesThis subcontract, titled Aerospace Forging and Casting Services, is issued by the Department of Defense under the ASC Supplier OEM Division. The project involves the high-temperature metal casting or forging of aerospace-grade alloy blanks intended for prime contractors on DLA Aviation supply contracts. The primary objective is the production of raw compressor disk blanks that meet strict material specifications and dimensions, as these components are classified as Critical Safety Items. The selected provider must utilize industrial casting furnaces or forging presses capable of processing superalloys to deliver the finished compressor disk blanks. This opportunity was posted on September 29, 2026, with a response deadline of October 29, 2026. The work falls under NAICS code 331528.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Specialized Casting ServicesThis subcontract for Specialized Casting Services involves the production of raw cast components for prime contractors supporting NAVSUP WSS torpedo receptacle projects. The selected provider will be responsible for casting receptacle bodies according to Drawing 6990491, utilizing industrial casting foundries and specific alloys to ensure technical compliance. The contract is managed by the Department of Defense under the Navsup Weapon Systems Support Mech agency, falling under NAICS code 331528. Key deliverables include the cast torpedo receptacle bodies and the submission of material certifications as part of the Test/Inspection Report CDRL A002. The response deadline for this opportunity is October 29, 2026.

Navsup Weapon Systems Support Mech

POSTED

about 1 month ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Same awarding agency

Supply of Certified Aerospace Alloy StockThis subcontract involves the supply of certified aerospace-grade raw metal alloy stock, specifically in the form of bars or wire, for prime contractors working on DLA Weapons Support ASC projects. The materials must strictly adhere to the chemical and physical properties outlined in NASM20426, NASM5674, and drawing NR 13873. To ensure quality and regulatory compliance, the provider must deliver full material traceability and Mill Test Reports, while guaranteeing that all material origins comply with the Berry Amendment and the Buy American Act. The contract is managed under the Department of Defense through the DLA Weapons Support ASC Commodities Division, with the place of performance located at Tinker AFB. Interested parties must respond by October 23, 2026, to provide the certified raw material stock directly to the manufacturer.

Metal Coating, Engraving (except Jewelry and Silverware), and Allied Services to Manufacturers

POSTED

about 17 hours ago

DEADLINE

Manufacture of Solid Rivets (NSN 5320-00-638-9059)This subcontract involves the manufacture of solid rivets for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The project requires the production of rivets according to standards NASM20426, NASM5674, and drawing NR 13873 EI-006389059, utilizing precision cold-heading or machining equipment. A total of 4 lbs of finished rivets must be delivered, packaged in accordance with ASTM D3951 and MIL-STD-129, with performance taking place at Tinker AFB. Qualified providers must hold SAE AS9003 or ISO 9001 quality certification and ensure full compliance with the Buy American Act and the Berry Amendment. The use of additive manufacturing is strictly prohibited for this contract. Interested parties should note the response deadline of October 23, 2026, for this Department of Defense requirement under NAICS code 332994.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 17 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract involves providing military-grade packaging and marking services for prime contractors supporting the Department of Defense DLA Weapons Support ASC Commodities Division. The scope of work focuses on the processing of critical pump components, specifically three sleeve bearings, ensuring full compliance with MIL-STD-129, MIL-STD-2073-1E, and RP001 standards. Technical requirements include the application of preservation method 33, cleaning and drying method 1, and the use of G8 wrap material, utilizing specialized military-grade marking equipment. The completed deliverables are to be shipped to DLA Distribution DDSP in New Cumberland, Pennsylvania. This project falls under NAICS code 488510 and was posted on October 15, 2026, with a response deadline of October 23, 2026.

Freight Transportation Arrangement

POSTED

about 17 hours ago

DEADLINE

Manufacturer of Sleeve Bearings (NSN 3120-00-336-9385)This subcontract involves the manufacture and supply of three precision-machined sleeve bearings for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The components must be produced according to NSN 3120-00-336-9385 specifications and adhere to the DLA Master List of Technical and Quality Requirements RA001. To ensure quality and safety, the manufacturer must use precision equipment to guarantee materials are mercury-free and maintain certification in SAE AS9100, SAE AS9003, or ISO 9001. The project is categorized under NAICS code 332991, with performance taking place in New Cumberland. The finished sleeve bearings are to be delivered FOB Origin. Interested parties must respond by October 23, 2026, regarding this Department of Defense requirement.

Ball and Roller Bearing Manufacturing

POSTED

about 17 hours ago

DEADLINE

Supply of Ambient Temperature Sensors (NSN 6685-01-443-4207)This subcontract involves the manufacture or sourcing of 22 warranted ambient temperature sensors for prime contractors supporting the Department of Defense. The sensors must strictly adhere to NSN 6685-01-443-4207 and Reference Drawing NR 99207 5107T18, Revision B. Final delivery of the units is required at DLA Distribution Jacksonville. To be eligible, providers must hold US/Canada Joint Certification Program certification and maintain CMMC Level 2 compliance. All shipments must be packaged in accordance with ASTM D3951 and MIL-STD-129 standards. The contract is managed under the DLA Weapons Support ASC Commodities Division.

Automatic Environmental Control Manufacturing for Residential, Commercial, and Appliance Use

POSTED

about 17 hours ago

DEADLINE

Supply of Specialized Metal Stock for Fastener ProductionThis subcontract involves the supply of specialized raw metal rod or wire stock intended for prime contractors delivering to the DLA Weapons Support ASC Commodities Division. The materials must strictly adhere to the specifications outlined in drawing 56161 10503412 and be delivered directly to the manufacturer. To ensure regulatory compliance, the provider must furnish Mill Test Reports verifying that the specialty metals are domestically sourced in accordance with the Berry Amendment and the Buy American Act. Performance for this contract is centered in New Cumberland, Pennsylvania, under NAICS code 332999.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 17 hours ago

DEADLINE

Manufacture of Headed Straight Pins (NSN 5315-12-324-2779)This subcontract involves the manufacture of 41 certified headed straight pins, identified by NSN 5315-12-324-2779, for prime contractors delivering to DLA distribution centers. The production process requires the use of precision heading and cutting machinery within a mercury-free environment, ensuring strict adherence to DIN 1436 and drawing 56161 10503412. The project mandates rigorous quality control and compliance standards, including SAE AS9003, ISO 9001, and MIL-STD-1916. Additionally, all items must be packaged and marked according to MIL-STD-2073-1E and MIL-STD-129. The work is associated with the Department of Defense under the DLA Weapons Support ASC Commodities Division and is to be performed in New Cumberland.

Hardware Manufacturing

POSTED

about 17 hours ago

DEADLINE

Aerospace Component Packaging and ShippingThis subcontract for Aerospace Component Packaging and Shipping involves providing military-grade packaging and marking services for high-precision aircraft components, specifically bushings, on behalf of prime contractors for the DLA Weapons Support ASC Commodities Division. The scope of work requires strict adherence to MIL-STD-2073-1E and RP001 for packaging and MIL-STD-129 for shipment marking. All materials used must meet military specifications to ensure components are ready for transit. The project is performed in San Diego, with final delivery handled as FOB Origin to DLA Distribution San Diego. This opportunity falls under NAICS code 488410 and was posted on October 15, 2026, with a response deadline of October 23, 2026.

Motor Vehicle Towing

POSTED

about 17 hours ago

DEADLINE

Precision Manufacturing of Sleeve BushingsThis subcontract involves the precision manufacturing of six finished sleeve bushings for prime contractors supporting DLA Weapons Support ASC projects for Sikorsky Aircraft Corporation. The contractor must fabricate all parts using traditional CNC machining in strict accordance with Drawing 96916 21E1638 Revision B, as additive manufacturing is explicitly prohibited. Compliance with MIL-STD-1916 or ASQ H1331 sampling standards is required, and all materials must adhere to the Buy American Act and Berry Amendment requirements. The project is managed under NAICS code 336413 and requires the contractor to maintain a CMMC Level 2 Self-Assessment. Performance of the contract will take place in San Diego, California. Interested parties must respond by the deadline of October 23, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 17 hours ago

DEADLINE

Annular Ball Bearing Manufacturer/Supplier (NSN 3110-00-134-0190)This subcontract involves the manufacture and supply of 71 annular ball bearings for prime contractors supporting DLA Weapons Support ASC projects. The supplier must produce the parts in strict accordance with Basic Drawing X4F3 AMSCBDOC Revision D and QAP 13873 QAP-B02 Revision B. Additionally, the contractor is responsible for ensuring all items meet specific military standards for preservation, packaging, and marking, specifically MIL-DTL-197M, MIL-STD-2073-1E, and MIL-STD-129. The contract requires the supplier to maintain approved source status and strictly adhere to DFARS 252.225-7016 domestic sourcing compliance. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 332991. The final deliverable consists of 71 properly packaged and marked bearings delivered to the Department of Defense.

Ball and Roller Bearing Manufacturing

POSTED

about 17 hours ago

DEADLINE

Annular Ball Bearing Supplier (NSN 3110008522646)This subcontract, issued by the Department of Defense DLA Weapons Support ASC Commodities Division, requires the procurement of 53 annular ball bearings under NSN 3110008522646. The supplier is responsible for manufacturing or sourcing bearings that match Part Number 890666-6, ensuring all units undergo bare item marking per RQ017 and adhere to preservation and packaging standards defined by MIL-DTL-197M and MIL-STD-129. Delivery is specified as FOB Origin, with the place of performance located in San Diego. To qualify, the contractor must maintain ITAR compliance and utilize inspection systems certified under ISO 9001 or SAE AS9003. This opportunity is designated as a Total Small Business Set-Aside under FAR 19.5, falling under NAICS code 332510. Interested parties must submit their responses by October 23, 2026.

Hardware Manufacturing

POSTED

about 17 hours ago

DEADLINE

Defense-Compliant Packaging and Palletization ServicesThis subcontract for Defense-Compliant Packaging and Palletization Services supports prime contractors on DLA Weapons Support ASC projects. The scope of work involves the specialized packaging, marking, and palletization of 102 hardware units for FOB Origin shipment to the DLA Distribution Depot Oklahoma at Tinker AFB. All work must be performed using MIL-SPEC materials and industrial securing equipment to ensure full compliance with military standards. Technical requirements mandate that packaging adheres to ASTM D3951, while marking and labeling must follow MIL-STD-129. Additionally, palletization must meet DLA requirement RP001. This project falls under NAICS code 561910 and is managed by the Department of Defense through the DLA Weapons Support ASC Commodities Division.

Packaging and Labeling Services

POSTED

about 17 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS