Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, June 24 at 2:00 PM EDT

Register Free →

This Solicitation opportunity from Government of Canada was posted on January 27, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Specialized Communication Equipment and Services

Closed
W6399-26-TP95Canada

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 334290
New
Federal
58--Intent to Sole s Source InnovaSea ProductsThe U.S. Department of the Interior’s U.S. Geological Survey Columbia Environmental Research Center intends to award a sole source contract to Innovasea for the procurement of specific acoustic telemetry transmitters and receivers. This acquisition is justified on the basis that only Innovasea can provide the necessary equipment to meet the agency’s requirements, including models such as the HR2-180kHz High Residency Receiver, NexTrak R1 Transponding Acoustic Receiver with battery, V9 180 kHz Transmitter, and V9 Transmitter with Pressure Sensor. The action will be conducted under FAR 13.106-1(b)(1), allowing negotiation with a single source without competition. This notice is strictly for informational purposes and does not constitute a request for quotes or bids. However, other responsible parties interested in demonstrating their capability to supply the specified equipment are encouraged to submit a written capability statement by the specified deadline. Submissions must be detailed and cost-free, supporting the responder’s bona fide ability to fulfill the requirement, and must be sent via email to the designated contact. The government reserves full discretion in determining whether to proceed with sole source negotiations or cancel the requirement, and no verbal or phone inquiries will be accepted. The NAICS code associated with this procurement is 334290, covering other communications equipment manufacturing.
Ofc Of Acqusition Grants-National

POSTED

about 18 hours ago

DEADLINE

in 15 days
NAICS: 334290
New
Federal
58--MODEM ASSEMBLY,COMM- AND SIMILAR REPLACEMENT PARTS, IN REPAIR/MODIFICATION OFThe contract involves the procurement of 33 units of modem assemblies, specifically for communication and similar replacement parts used in repair or modification processes. The delivery terms are FOB origin, and the Government does not hold ownership or rights to the data necessary for purchasing or contracting repairs from other sources. It has been determined that acquiring the data rights or reverse engineering the part is not cost-effective. Interested parties can access relevant Military and Federal Specifications, Standards, and Qualified Product Lists through the DoD Single Stock Point or ASSIST-Online platforms. This contract will be awarded through a sole-source negotiation under FAR 6.302-1, although any responsible party may express interest or submit proposals within 30 days from the posting date of the solicitation. The Government retains discretion over whether to proceed with a competitive procurement based on the responses received. Only offerors meeting qualification requirements at the time of award, as specified in FAR clause 52.209-1, will be considered. The contracting agency is the Department of Defense’s Naval Supply Systems Command Weapon Systems Support Mechanical office located in Mechanicsburg, PA, with Ethan Lentz designated as the point of contact for inquiries. The solicitation is open until July 6, 2026.
Navsup Weapon Systems Support Mech

POSTED

about 18 hours ago

DEADLINE

in 11 days
NAICS: 334290
New
Federal
Gen6 Lifecycle Sustainment Risk AssessmentThe contract aims to secure a Gen6 Lifecycle Sustainment Risk Assessment for the Naval Air Systems Command Program Management Activity 209 (PMA-209) Air Combat Electronics, focusing on the AN/ARC-210(V) RT-2036(C) radio system. This assessment is intended to help Collins Aerospace, the designated contractor, evaluate the sustainment capabilities of the Gen6 system. The scope of work includes delivering one risk assessment along with a mid-term and a final briefing detailing the progress and findings of the task. The procurement is being conducted on a sole-source basis under the authority that recognizes Collins Aerospace as the only responsible source due to their exclusive rights to the commercial electronic protection radio systems and associated technical data required. The acquisition is classified as a presolicitation with no competitive proposal requested at this stage, and the government explicitly states no intent to fund development or qualification of other sources. Interested parties may express their interest and capability by the deadline to be considered for the potential of a competitive procurement, although the government retains sole discretion on whether to pursue competition. The contract falls under NAICS code 334290 and will be executed primarily in Cedar Rapids, Iowa. All inquiries are to be submitted via email by the specified deadline, and those interested in subcontracting should contact Collins Aerospace directly.
Naval Air Warfare Center Air Division

POSTED

about 18 hours ago

DEADLINE

in 15 days
NAICS: 334290
New
Federal
MODEM,COMMUNICATIONThis contract pertains to the procurement of communication modems under solicitation number SPRMM126QHD32 issued by the Defense Logistics Agency (DLA) Mechanicsburg, part of the Department of Defense. The contract outlines detailed requirements for the manufacture, delivery, inspection, acceptance, packaging, and quality assurance of the specified modems, which must conform to identified Cage Codes and part numbers. The modems are required to meet MIL-STD-130 marking standards, and any changes to design, materials, or part numbers must be approved by the contracting officer through a formal change order process. The contract also mandates the use of electronic invoicing and receiving report submission through the Wide Area Workflow (WAWF) system. Inspection responsibilities are primarily on the contractor, who must maintain records of inspections for a year following final delivery, while the government retains the right to perform additional inspections as needed. Packaging must comply with MIL-STD 2073 requirements. Only authorized distributors of the original manufacturer’s items may be considered for award, with documentation proving authorization required at the time of proposal submission. The contract follows a Lowest Price Technically Acceptable (LPTA) award criterion and places emphasis on cybersecurity, supply chain security, and compliance with Defense Federal Acquisition Regulations Supplement (DFARS). Contractors are encouraged to register with electronic systems such as NAVSUP WSS and PIEE to streamline communications and contract management. The response deadline for this solicitation is June 25, 2026.
SPRMM1 DLA Mechanicsburg

POSTED

about 18 hours ago

DEADLINE

in 14 days

AI Contract Overview

Show more

This contract involves a Request for Proposal (RFP) under Supply Arrangement W6399-22-CA50 for the procurement of specialized communication equipment and services. The solicitation, identified by number W6399-26-TP95, was posted on January 27, 2026, with a submission deadline of February 4, 2026. The opportunity is managed by the Department of National Defence within the Government of Canada, with performance expected to occur in Canada. Vendors who are already holders of the specified Supply Arrangement will receive the RFP directly via email, while those outside this arrangement must first qualify under it to be eligible to submit proposals. Interested vendors are encouraged to contact the Supply Arrangement Contracting Officer at Public Services and Procurement Canada (PSPC) to learn the process required to be considered for the Supply Arrangement. The primary point of contact for this solicitation is Chris Muldoon, the Contracting Authority, who can be reached via email. This procurement focuses specifically on specialized communication equipment and services, emphasizing a federal government requirement. The solicitation and related information are accessible through the CanadaBuys platform.

General Info

RFP for specialized communication equipment, deadline February 4, 2026, managed by Canadian Defence.

Agency

Government of Canada → Department of National Defence

NAICS

334290 - Other Communications Equipment ManufacturingView NAICS

Place of Performance

CAN

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed
Posted

Solicitation

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyGovernment of Canada → Department of National Defence
Contacts1 person available
OfficeN/A
Organization / Agency
Government of Canada → Department of National Defence
Office AddressN/A
Contacts
Chris MuldoonContracting Authority

Full Description

Show more
This requirement is a Request for Proposal (RFP) against Supply Arrangement # W6399-22-CA50. All Supply Arrangement holders will be e-mailed the RFP directly. If vendors outside of the Supply Arrangement are interested in submitting a proposal, they will have to qualify for the Supply Arrangement before they are given an opportunity to bid on this requirement. Please contact the Supply Arrangement Contracting Officer at PSPC to obtain the steps required to be considered for Supply Arrangement # W6399-22-CA50.