Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Specialized Fasteners and Hardware Supply

Active

Federal

Response Deadline12/01/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the procurement of nuts, bolts, screws, and specialized fasteners to support prime contractors delivering installation kits for the DLA Weapons Support Land Supply Chain. All provided hardware must strictly adhere to the grade and material standards specified in the TDP Rev B Gen 2 reference drawings. Due to the critical nature of the components, the supplier is required to maintain quality certification for aerospace and defense grade fasteners to ensure all deliveries are fully certified. Managed by the Department of Defense under NAICS code 332722, the contract was posted on October 30, 2026, with a response deadline of December 1, 2026. Performance for this requirement is centered in the 17070-5002 zip code area. Interested parties can find further details through the DLA Weapons Support Land Supply Chain procurement portal.

General Info

Procurement of certified aerospace fasteners for DLA Weapons Support Land Supply Chain kits.

Agency

Department Of Defense → DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer Manufacturing

Place of Performance

PA, 17070-5002, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7L1-26-R-0115.

The full solicitation package (4 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

INSTALLATION KIT, VEHICULAR EQUIPMENT COM

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 30

subcontract

Response DeadlineDec 1

Submission deadline

Response Deadline

12/01/2026, 05:00:00 PM UTCin about 1 month

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies nuts, bolts, screws, and specialized fasteners for prime contractors delivering DLA Weapons Support Land Supply Chain installation kits. Sources and supplies hardware meeting specific grade and material standards cited in the TDP Rev B Gen 2 reference drawings. Requires quality certification for aerospace/defense grade fasteners. Delivers certified fasteners and hardware.

Similar Contracts

Same NAICS industry code

VACCO NSNs-Sole Source

Solicitation # CM26265595

DLA Land and Maritime is conducting a sources-sought market survey under solicitation CM26265595 to identify potential manufacturers for a variety of hardware components. The request focuses on identifying sources capable of producing items such as sleeve bushings, bearings, socket head cap screws, self-locking hexagon nuts, washers, fiberlocks, and quick release pins, as specified by a provided list of National Stock Numbers and part numbers. Interested parties must provide the manufacturer's location and point of contact information to Contract Specialist Carlos Oquendo by the response deadline of October 23, 2026. Companies seeking to be qualified as an Approved Source must apply through the DLA Land and Maritime Alternate Offer/Source Approval Request (SAR) Program. This process requires the submission of a technical data package to demonstrate that the prospective contractor can manufacture products of equal or superior quality to the Original Equipment Manufacturer. The responsibility lies with the contractor to document and prove their product's equivalence. All responses and completed market surveys should be submitted directly to the listed Contract Specialist.

DLA Land And Maritime

POSTED

about 5 hours ago

DEADLINE

NUT,SELF-LOCKING,HE

Solicitation # N0010426QNB15

Solicitation NO0104-26-Q-NB15 is a total small business set-aside issued by NAVSUP Weapon Systems Support Mechanicsburg for the procurement of 800 degree F, silver-plated, self-locking hexagon nuts. These components are designated as Special Emphasis material due to their use in crucial shipboard systems where failure could result in serious personnel injury or loss of the vessel. The requirements specify adherence to Newport News Shipbuilding drawing 501-4457023, NASM25027, and modified NASM21046 standards, with materials requiring SAE-AMS-QQ-S-763 Class 304 certification. The contract mandates rigorous quality assurance, including First Article Testing, dye penetrant inspection, and intergranular corrosion testing. Contractors must maintain a quality system compliant with ISO-9001 or MIL-I-45208 and provide a detailed Certificate of Compliance with full traceability. Delivery is specified as F.O.B. Destination, and all certification data must be submitted via Wide Area Workflow for review and acceptance by Portsmouth Naval Shipyard prior to shipment. The procurement is DO certified under the Defense Priorities and Allocations System and is subject to Emergency Acquisition Flexibilities.

Navsup Weapon Systems Support Mech

POSTED

about 5 hours ago

DEADLINE

Supply of Shear Bolts (NSN 5306-01-123-7105)This subcontract involves the manufacture or procurement of 76 specialized shear bolts, identified by NSN 5306011237105, for prime contractors supporting the Department of Defense. Managed by the DLA Weapons Support ASC Commodities Division, the contract requires strict adherence to DFARS 252.223-7008 concerning hexavalent chromium and DFARS 252.225-7007. All deliverables must meet specific packaging and marking standards as outlined in the Statement of Work. The performance of this contract is centered at Robins Air Force Base. Under NAICS code 332722, the supplier is responsible for ensuring all units meet the rigorous technical specifications required for Department of Defense supply chains. The solicitation process concludes with a response deadline of November 6, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Screw Thread Inserts (NSN 5325-01-163-6206)This subcontract involves the supply of 124 screw thread inserts conforming to NSN 5325-01-163-6206 for prime contractors delivering to the Department of Defense DLA Weapons Support ASC Commodities Division. The scope of work includes the manufacture or sourcing of these inserts, with the potential use of additive manufacturing methods to meet specifications. The contractor is responsible for ensuring all items are marked for shipment and storage in accordance with MIL-STD-129 and that hazardous material labeling complies with 29 CFR 1910.1200. Performance for this contract is centered in Jacksonville, Florida, under NAICS code 332722.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Manufacture and Supply of Screw Thread Inserts (NSN 5325010765513)This subcontract involves the manufacture and supply of 20 certified screw thread inserts, identified by NSN 5325010765513, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. Because these components are designated as Critical Application Items, the manufacturer must utilize precision machining and inspection tools to ensure strict adherence to quality and tolerance standards. The project requires all packaging and marking to be performed in accordance with MIL-STD-129. Performance of the contract will take place in Jefferson City, Missouri, under NAICS code 332722. The response deadline for this requirement is November 6, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Lock Washers (NSN 5310-01-269-2537)This subcontract involves the procurement of 11 units of lock washers conforming to NSN 5310-01-269-2537 for prime contractors supporting DLA supply contracts. The selected source or manufacturer must ensure all items are packaged according to MIL-STD-2073-1E and delivered to the DLA Distribution DDSP New Cumberland Facility. The contract is managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division and falls under NAICS code 332722. A critical requirement for this engagement is strict compliance with NIST SP 800-171 standards for the secure handling of controlled unclassified information.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Spacer, Sleeve (NSN 5365006240255)This subcontract involves the manufacture or procurement of five sleeve spacer units under NSN 5365006240255 for the Department of Defense, specifically the DLA Weapons Support ASC Supplier Oper AE and AF Div. The contractor is responsible for ensuring all hardware meets strict regulatory standards, including MIL-STD-129 for marking and DFARS 252.223-7008 regarding the restriction of hexavalent chromium. To qualify for this contract, the provider must maintain a quality management system compliant with either ISO 9001 or SAE AS9003. The performance of the contract is centered in Albany, and the final deliverables must be properly marked and packaged according to the specified military standards.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Supply of Machine Screws (NSN 5305001972389)This subcontract involves the supply of 75 machine screws to prime contractors supporting the Defense Logistics Agency Weapons Support ASC Commodities Division. The required parts are identified by NSN 5305001972389 and Part Piece Number STD P/N -08-10B, and must strictly adhere to NAS1101, Revision 14 standards. Delivery is specified as FOB Origin, with the place of performance located in New Cumberland. The agreement mandates strict adherence to federal regulations, specifically requiring compliance with FAR 52.246-2 for quality inspections and DFARS 252.204-7008 regarding safeguarding controls. The contract falls under NAICS code 332722 and was posted on October 29, 2026, with a response deadline of November 6, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Lock Washers (NSN 5310012906247)This subcontract involves the supply of four lock washer units matching NSN 5310012906247 for prime contractors working with the Defense Logistics Agency Weapons Support ASC Supplier Oper OEM Division. The selected provider is responsible for either manufacturing or sourcing the components and ensuring they meet strict quality inspection standards per MIL-STD-1916 or ASQ H1331. All shipments must be packaged in accordance with MIL-STD-129 and MIL-STD-2073-1E. This opportunity falls under NAICS code 332722 and was posted on October 29, 2026, with a response deadline of November 6, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Shoulder Bolt Supplier (NSN 5306-00-991-6416)This subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Commodities Division, requires the supply of 640 shoulder bolts conforming to NSN 5306-00-991-6416 specifications and the DLA Master List of Technical and Quality Requirements. The items must be packaged according to ASTM D3951 using domestic materials and delivered FOB Origin to Cherry Point. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 332722. Eligible suppliers must provide a Unique Entity ID and CAGE code, along with certification that no covered defense telecommunications equipment is utilized. The response deadline for this requirement is November 6, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Socket Head Cap ScrewsThis subcontract involves the supply of 332 socket head cap screws under NSN 5305-00-151-8699 for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The items must strictly adhere to NSN material specifications, and the use of additive manufacturing is prohibited unless prior ESA approval is obtained. Delivery is designated as FOB Origin, with the place of performance located in San Diego, California. The contractor is responsible for ensuring all units are packaged according to MIL-STD-2073-1E, marked in accordance with MIL-STD-129, and palletized per RP001. This requirement falls under NAICS code 332722 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Vehicular Component Brackets (NSN 2590016554267)This subcontract involves the procurement or manufacture of four vehicular component brackets for prime contractors supporting the Defense Logistics Agency Weapons Support Land Supplier Operations. The required components must strictly adhere to NSN 2590016554267 and Part Number 12590022 from Birdon America Inc. All deliverables must be packaged according to RP001 and marked in compliance with MIL-STD-129. The contract is managed under NAICS code 332722 and requires strict adherence to cybersecurity standards, specifically DFARS 252.204-7012 and NIST SP 800-171. Performance of the contract will take place in New Cumberland, Pennsylvania. Interested parties must respond by November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

Same awarding agency

Kit Assembly and Packaging ServicesThis subcontract for Kit Assembly and Packaging Services supports the DLA Weapons Support Land Supply Chain by providing final kitting, packaging, and marking for prime contractors. The selected provider will be responsible for gathering components, verifying counts, and ensuring all installation kits are fully assembled, marked, and palletized. All work must strictly adhere to MIL-STD-2073-1, MIL-STD-129, and MIL-STD-130 standards. A critical requirement for this engagement is demonstrated experience with Unique Item Identification marking. The project falls under NAICS code 333999 and is managed by the Department of Defense. Interested parties must submit their responses by December 1, 2026, for performance at the designated facility in zip code 17070-5002.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

DEADLINE

in about 1 month

Custom Brackets and Sheet Metal FabricationThis subcontract involves the fabrication of custom formed metal brackets, plates, and housings intended for prime contractors supporting DLA Weapons Support Land Supply Chain installation kits. The scope of work includes sheet metal cutting, bending, punching, and finishing processes that must strictly adhere to TDP Rev B Gen 2 specifications. Additionally, all components must receive finishes that meet rigorous military corrosion resistance standards to ensure durability and performance. Managed under the Department of Defense for the DLA Weapons Support Land Supply Chain, the project falls under NAICS code 332322. The performance of the contract is centered in the 17070-5002 zip code area. Interested parties should note the response deadline of December 1, 2026, for this specialized manufacturing requirement.

Sheet Metal Work Manufacturing

POSTED

DEADLINE

in about 1 month

Precision Machined Components for Vehicular Installation KitsThis subcontract involves the manufacture of precision metal parts and hardware intended for vehicular installation kits supporting the DLA Weapons Support Land Supply Chain. The scope of work requires the use of CNC machining, milling, turning, and drilling to produce components that strictly adhere to material specifications and military drawing tolerances as outlined in the TDP Rev B Gen 2 reference drawings. The project is managed under NAICS code 332710 for the Department of Defense. Interested parties must submit their responses by December 1, 2026, for performance located in the 17070-5002 zip code area. The final deliverable consists of finished machined metal components that meet all specified technical requirements for prime contractors.

POSTED

DEADLINE

in about 1 month

Manufacturing and Supply of Operating Rods (Aft)This subcontract involves the manufacturing and supply of 20 precision-machined aft operating rods, identified by NSN 5340-01-493-9406, for prime contractors supporting DLA Aviation aircraft hardware projects. The work is managed under the Department of Defense through the DLA Weapons Support Land Supply Chain, falling under NAICS code 336413. The contractor is required to fabricate the components to strict government specifications and implement Unique Item Identification using 2D data matrix symbology in accordance with ISO/IEC 16022. Final delivery must include the specified units along with compliant UII markings and all necessary receiving reports.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

in about 1 month

Spur Gear Fabrication (P/N 3-51145-1)This subcontract, issued by the DLA Weapons Support Land Supply Chain under the Department of Defense, requires the manufacture and supply of new, unused spur gears, specifically part number 3-51145-1. The selected contractor must utilize precision gear cutting and machining equipment to ensure the product meets exact technical specifications. A critical requirement of the contract is the performance of Government First Article Testing to validate conformity, with the final deliverables consisting of the physical spur gears and the corresponding test results. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 333515. To be eligible, the provider must be an approved source or demonstrate the ability to produce an exact product as outlined in Section L. The response deadline for this requirement is November 30, 2026, with performance taking place in the 84056-5734 zip code area.

Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

DEADLINE

in about 1 month

ROD, OPERATING, AFT

Solicitation # SPE7L1-27-R-0009

Solicitation SPE7L1-27-R-0009 is a full and open competition procurement issued by the DLA Weapons Support Land Supply Chain for the supply of 20 units of ROD, OPERATING, AFT (NSN 5340-01-493-9406). The required delivery date is 298 days after the date of award, with both inspection and acceptance occurring at the destination. Award decisions will be based on a trade-off between price and non-price factors, with past performance, proposed delivery, and socioeconomic support serving as the primary evaluation criteria. The contract mandates strict compliance with technical and quality requirements, including the prohibition of Class I ozone-depleting chemicals and the use of MIL-STD-1916 or ASQ H1331 for sampling. Items must be marked with unique item identifiers using ISO/IEC 16022 two-dimensional data matrix symbology. Due to the nature of the technical data, offerors must possess an approved US/Canada Joint Certification Program certification and adhere to ITAR or EAR export controls. Additionally, the contractor must meet CMMC Level 2 certification requirements and utilize the Wide Area WorkFlow system for electronic invoicing.

POSTED

DEADLINE

in about 1 month

Solicitation # SPE7L1-27-R-0019

Solicitation SPE7L1-27-R-0019 is a firm-fixed-price, total small business set-aside procurement issued by the DLA Weapons Support Land Supply Chain for 407 spur gears, part number 3-51145-1. This item is designated as a critical application item and must be manufactured in accordance with Technical Data Package Rev B Gen 2 and reference drawing 76823. The procurement includes a requirement for Government First Article Testing, which dictates the delivery schedule; delivery is required within 420 days after award without first article testing or 630 days with it. The contract mandates strict quality and packaging standards, requiring compliance with MIL-STD-129 and DLA packaging requirements RP001. Inspection and acceptance are set at the point of origin, though Government Source Inspection is mandatory if the first article test requirement is invoked. Award will be based on the best value to the Government, evaluating price, past performance via the Supplier Performance Risk System, and proposed delivery timelines. All invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow system.

Speed Changer, Industrial High-Speed Drive, and Gear Manufacturing

POSTED

DEADLINE

in about 1 month

Solicitation # SPE7L1-27-Q-0130

Rubber and Plastics Hoses and Belting Manufacturing

POSTED

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L1-27-Q-0134

POSTED

DEADLINE

INSTALLATION KIT, VEHICULAR EQUIPMENT COM

Solicitation # SPE7L1-26-R-0115

Solicitation SPE7L1-26-R-0115 is a firm-fixed-price request for proposal issued by the DLA Weapons Support Land Supply Chain for the procurement of 66 installation kits for vehicular equipment, NSN 2590-01-703-2614. The requirement is open for full and open competition with a HUBZone price preference. The primary deliverable must be provided within 234 days after the date of award, with a customer required delivery date of July 30, 2026. The contract includes options for follow-on basic quantities and concurrent options, potentially increasing the total quantity to 132 units. Delivery, inspection, and acceptance are all designated as FOB Origin, with shipments destined for the DLA Distribution DDSP New Cumberland facility in Pennsylvania. Award decisions will be based on a best-value determination using a trade-off between price and non-price factors, which are weighted approximately equal. Key evaluation criteria include price reasonableness, proposed delivery, small business participation, and past performance as measured by the Supplier Performance Risk System. Technical compliance is mandatory, requiring adherence to a comprehensive set of reference drawings and strict packaging and marking standards, including MIL-STD-2073-1, MIL-STD-129, and MIL-STD-130. Contractors must meet stringent security and regulatory requirements, including CMMC Level 2 certification from a Certified Third-Party Assessment Organization and compliance with ITAR or EAR export controls for technical data. Additionally, the use of Class I ozone-depleting chemicals is prohibited. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment, and offerors must provide a Unique Entity Identifier and CAGE code with their submissions.

POSTED

DEADLINE

in about 1 month

Friction Lining Component Supplier (NSN 3040-12-396-5570)This subcontract involves the supply of seven friction lining units for prime contractors supporting the DLA Weapons Support Land Supply Chain within the Department of Defense. The supplier is responsible for manufacturing or sourcing components that strictly adhere to NSN 3040-12-396-5570 and the DLA Master List of Technical and Quality Requirements. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 332510. Strict adherence to logistical and security standards is required, including packaging per ASTM D3951 and marking per MIL-STD-129. Additionally, the contractor must maintain compliance with NIST SP 800-171 security protocols. The solicitation was posted on October 29, 2026, with a response deadline of November 9, 2026.

Hardware Manufacturing

POSTED

DEADLINE

Supply of Cummins Diesel Engine Block AssembliesThis subcontract, issued by the DLA Weapons Support Land Supply Chain under the Department of Defense, requires the procurement and delivery of four Cummins Diesel Engine Model C8.3 block assemblies. The specified parts must match Cummins Inc. part numbers 3968733 or 396873300 and National Stock Number 2815013308069. A critical requirement of the agreement is the removal of government identification from any non-accepted supplies in accordance with RQ011 guidelines. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 423910. Interested parties must maintain active SAM validation to be eligible for the award. The solicitation was posted on October 29, 2026, with a response deadline set for November 9, 2026.

Sporting and Recreational Goods and Supplies Merchant Wholesalers

POSTED

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

53--NUT,SELF-LOCKING,EXTENDED WASHER,HEX

Solicitation # SPE4A6-26-R-XD26

ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS