Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Specialized Finishing and Coating Application

Active

Federal

Response Deadline08/19/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the application of aluminized coatings and F-1 finish codes in accordance with LAC 0471 and LAC G-14 specifications, ensuring compliance with precise military finishing standards. Corrosion inhibition is a critical component, mandating the use of Corban-35 on all faying surfaces to protect against degradation in demanding operational environments. The work is classified as a subcontract under the NAICS code 332813, indicating specialized manufacturing services for metal coating and finishing. Performance is expected to meet stringent Department of Defense requirements, though the exact location of performance is not specified. The solicitation was posted on July 20, 2026, with a response deadline of August 19, 2026, allowing potential contractors a four-week window to submit proposals through the DIBBS platform.

General Info

Apply aluminized coatings and F-1 finish per LAC 0471/G-14, use Corban-35 on faying surfaces, NAICS 332813, DOD compliance.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

332813 - Electroplating, Plating, Polishing, Anodizing, and ColoringView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 20

subcontract

Response DeadlineAug 19

Submission deadline

Response Deadline

08/19/2026, 05:00:00 PM UTCin 29 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Application of aluminized coatings and F-1 finish codes per LAC 0471 and LAC G-14, including corrosion inhibition with Corban-35 on faying surfaces.

Similar Contracts

Same NAICS industry code

Precision Metal Component ManufacturingThe contract requires the manufacture of a precision metal component: a straight, headless pin to be produced through either precision machining or cold-forming processes, ensuring strict adherence to military specifications and tight dimensional tolerances. The part must meet exacting quality and functional standards consistent with defense industry requirements, and production must align with the designated NAICS code 332813, which classifies the work under Other Fabricated Wire Product Manufacturing. The place of performance is specified as New Cumberland, Pennsylvania, with a zip code of 17070-5002, indicating where the manufacturing and delivery activities must occur. The contract is structured as a subcontract under the Department of Defense, managed by the ASC SUPPLIER OPER OEM DIVISION, and was posted on July 20, 2026, with a firm response deadline of July 28, 2026. No solicitation number is provided, and there is no set-aside designation, meaning the opportunity is open to all eligible subcontractors without preference based on size, ownership, or location. The contractual obligation centers on delivering a component that meets rigorous performance criteria, and all submissions must be directed through the designated DIBBS portal linked in the posting.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Surface Treatment and Corrosion ProtectionThis contract involves the application of protective surface treatments such as zinc plating and anodizing to defense equipment to ensure compliance with stringent environmental durability and corrosion resistance standards. The work is part of a subcontract under the Department of Defense and is managed by the Defense Logistics Agency, with the North American Industry Classification System code 332813 indicating specialization in metal coating, engraving, and allied services. The contract is posted for solicitation and pertains to the enhancement of equipment longevity under harsh operational conditions, which is critical for military applications. Performance location and specific site details are not provided, but the requirement emphasizes adherence to technical specifications for corrosion protection in defense systems. The contractual obligations center on delivering finished components that meet or exceed federal and military durability benchmarks, with the work expected to support the readiness and reliability of defense assets.

Defense Logistics Agency

POSTED

DEADLINE

Precision Fabricated Metal Component SupplyThe contract mandates the supply of a precision-engineered tube assembly set adhering strictly to military specifications, with absolute compliance required across all critical and major attributes, allowing zero non-conformance. The components must be manufactured and inspected in alignment with ISO 9001:2015 quality management standards and packaged and labeled per MIL-STD-2073-1E and MIL-STD-129 to ensure full interoperability and traceability within defense logistics systems. All work is to be performed under the authority of the Department of Defense, specifically the Aviation Supply Chain ESOC Buys division, with performance obligations centered at Tinker Air Force Base, Oklahoma, 73145-9031. The procurement is designated as a subcontract under NAICS code 332813, which classifies it within the atmospheric and water heating equipment manufacturing sector, indicating specialized fabrication capabilities are required. Proposals must be submitted by the deadline of July 28, 2026, with solicitation initiated on July 20, 2026, leaving a narrow window for qualified suppliers to respond. The requirement demands rigorous quality assurance, end-to-end documentation, and logistical readiness to support defense operations without delay or deviation.

AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Identification Plate Manufacturing (Metal Stamping & Engraving)The contract entails the manufacture and supply of serialized metal identification plates designed to meet rigorous military National Stock Number specifications, requiring precise stamping, engraving, and MIL-STD-129 marking to ensure compliance with Department of Defense standards. These plates are critical for asset tracking and logistics management across military supply chains, and their production must adhere to exacting dimensional, material, and durability requirements to function reliably in operational environments. The work is being performed under a subcontract tied to a Defense Logistics Agency procurement, with the North American Industry Classification System code 332813 indicating specialized metal stamping and forging activities. The contract was posted on July 20, 2026, and is administered through the DLA’s procurement portal under the award number SPE7LX24D0020 with delivery order SPE7L126F061Q, though no specific place of performance or point of contact details are provided. The subcontract nature implies the original prime contract is held by another entity, and the supplier is expected to deliver fully compliant plates without deviation from military standards, potentially involving quality control inspections, serialized batch tracking, and documentation for audit readiness. All produced items must be traceable and clearly labeled in accordance with MIL-STD-129 to ensure seamless integration into Defense Logistics Agency inventory systems.

Defense Logistics Agency

POSTED

DEADLINE

Precision Aircraft Frame ManufacturingThe contract calls for the fabrication of a precision aircraft frame meeting exacting dimensional tolerances based on approved stable base drawings, with delivery required to Fort Hood, Texas, zip code 76544. The work is classified as a subcontract under NAICS code 332813, indicating specialized manufacturing in the aerospace sector, and is being managed by the Department of Defense through the AVIATION SUPPLY CHAIN ESOC BUYS organization. The solicitation was posted on July 20, 2026, with a firm deadline for responses on July 28, 2026, and bidders must be prepared to meet stringent quality and precision standards critical to aircraft structural integrity. The place of performance is locked to Fort Hood, requiring logistics and delivery coordination to that specific military installation.

AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Metal Plating and Coating ServicesThe contract calls for the provision of corrosion-resistant or conductive plating services on electrical hardware, specifically including coatings such as cadmium, zinc, and nickel, to ensure compliance with rigorous military performance and environmental standards. The work is intended to support defense-related applications where durability, conductivity, and resistance to harsh conditions are critical, and must be executed to meet exacting specifications required by the Department of Defense. The services are being procured as a subcontract under the NAICS code 332813, which designates metal coating, engraving, and related services. Awarded by the Defense Logistics Agency, this subcontract is linked to the contract SPE7M526D62DK and was posted on July 20, 2026. While specific location details for performance or point of contact are not provided, the work is expected to be carried out in alignment with federal defense contracting requirements. The absence of a set-aside designation indicates it is open to all eligible contractors, and the focus remains on delivering high-integrity surface treatments that sustain operational readiness under demanding military environments.

Defense Logistics Agency

POSTED

DEADLINE

Precision Machining and Fabrication of Aerospace ComponentsThe contract involves precision machining and fabrication of metal and composite components intended for integration into aircraft air diffusers, with strict requirements for dimensional tolerances and material traceability to ensure compatibility and performance in high-stakes aerospace environments. The work is classified as a subcontract under NAICS code 332813, indicating specialized fabrication services, and is issued by the Defense Logistics Agency under the Department of Defense, reflecting its critical role in defense aerospace supply chains. The performance location and point of contact details are unspecified, but the work must adhere to rigorous quality standards to meet the stringent demands of aircraft systems. The contract was posted on July 20, 2026, and is linked to the DLA’s procurement system with reference identifiers for procurement tracking and award management.

Defense Logistics Agency

POSTED

DEADLINE

Stainless Steel Medical Clamp Component FabricationThis contract requires precision machining or stamping of corrosion-resistant, sterilizable stainless steel components specifically for use in a medical clamp mechanism, fully compliant with applicable medical device standards. The work must meet stringent quality and regulatory requirements to ensure suitability for surgical environments where sterility, durability, and material purity are critical. All parts must be fabricated using approved stainless steel alloys capable of withstanding repeated sterilization cycles without degradation, and the manufacturing process must include rigorous inspection and documentation protocols consistent with FDA and ISO medical device guidance. The contract is categorized as a subcontract under NAICS code 332813, issued by the Department of Defense through the Medical Supply Chain MD SURG FSF office. Respondents must submit proposals by July 27, 2026, with performance expected to take place at the FPO, ZIP code 96675 location. The solicitation is open to qualified manufacturers capable of meeting the technical specifications and regulatory compliance necessary for medical device components, with an emphasis on consistent quality control, traceability of materials, and adherence to cleanroom or controlled manufacturing practices. Failure to meet these requirements will result in disqualification regardless of pricing or other bid factors.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Phosphate Coating ApplicationThe contract mandates the surface treatment of armor components through phosphate coating in strict compliance with MIL-DTL-53039F specifications, with all work required to be performed exclusively at AMZ Manufacturing located in York, Pennsylvania. This subcontract, issued under the Defense Logistics Agency within the Department of Defense, is classified under NAICS code 332813 and is intended to ensure the corrosion resistance and adhesion properties of military-grade armor surfaces through a standardized chemical conversion process. The work must be completed without deviation from the military specification, and the designated facility is authorized as the sole site for fulfillment. The contract was posted on July 20, 2026, and while no solicitation number or set-aside details are provided, performance is tied specifically to the approved location and technical standard. The absence of a point of contact or detailed geographic information for performance suggests reliance on pre-established operational protocols and trusted vendor qualifications. All aspects of the coating process—including preparation, application, inspection, and documentation—must align fully with MIL-DTL-53039F requirements to meet quality and readiness standards for defense applications.

Defense Logistics Agency

POSTED

DEADLINE

Defense-Grade Coating and Surface FinishingThe contract awarded by the Defense Logistics Agency under the Department of Defense requires the application of corrosion-resistant or MIL-SPEC compliant surface coatings to a panel assembly, with acceptable methods including anodizing, powder coating, or chemical conversion processes. This subcontract is strictly focused on delivering high-performance surface treatments that meet military specification standards to ensure durability and environmental resistance in demanding operational conditions. The work must be performed in accordance with defense-grade requirements, though the exact location of performance is unspecified. The solicitation was posted on July 20, 2026, under the NAICS code 332813, which categorizes it within the metal finishing industry. While no set-aside designation or contracting office address is provided, the transaction is facilitated through the DIBBS platform with the contract identifier SPE4A725V3126, indicating a formal subcontracting arrangement within the broader defense supply chain. The absence of a point of contact or detailed place of performance suggests that the awardee is expected to coordinate logistics and compliance directly as part of the fulfillment obligation.

Defense Logistics Agency

POSTED

DEADLINE

Bonding and Sealing with Aerospace-Grade AdhesivesThe contract requires the application of aerospace-grade bonding and sealing using STM30-102 and STM40-107B sealants under strict environmental and process controls, with precise regulation of cure temperatures to ensure material integrity and long-term performance. Compliance with established aerospace industry standards is mandatory, demanding rigorous quality assurance, documentation, and adherence to validated curing protocols to meet mission-critical reliability requirements. The work must be executed with precision to support structural and environmental sealing applications in defense-related systems. This subcontract, issued under NAICS code 332813 by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, is open for response until August 19, 2026, with no set-aside designation indicated. Performance location and specific delivery details are not specified in the provided data, but all work must align with the technical and regulatory expectations of the aerospace sector. Interested parties must submit proposals through the DIBBS portal by the deadline, ensuring full understanding of the sealant specifications and curing parameters required to meet operational and safety standards.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Protective Coating and Surface FinishingThe contract under the title Protective Coating and Surface Finishing involves the application of corrosion-resistant finishes including anodizing, plating, and powder coating to metal components, primarily to meet the durability and performance standards required by the Department of Defense. It is identified as a subcontract under NAICS code 332813, which corresponds to metal coating, engraving, and allied services, and was posted on July 20, 2026, with performance tied to defense logistics needs managed by the Defense Logistics Agency. The contract spans multiple deliveries under the prime contract SPE4AX22D9404 and delivery order SPE4A626F255P, emphasizing precision and compliance with military specifications for surface treatments that enhance component longevity in harsh operational environments. No specific geographic location or point of contact is provided, indicating that the performance location may be distributed or determined by the subcontractor’s capabilities and logistics networks.

Defense Logistics Agency

POSTED

DEADLINE

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

MOUNT, VIEWERThe contract pertains to the procurement of a MOUNT, VIEWER with NSN/Part Number 5855-01-609-6819 under solicitation SPE4A7-26-R-0677, with a response deadline of August 20, 2026. First Article Test (FAT) requirements mandate that the test report be clearly marked with the contract number, once awarded, and the specified lot/item number. The FAT report must be signed and submitted along with the official system of record receiving report, such as WAWF or DD Form 250, and a contractor attestation confirming that the same manufacturing processes and facilities used for the first article will be used for all subsequent production units. Submission locations vary by contracting office: for DLA Aviation, Troop Support C&T, Medical Materiel, or Subsistence, the report is sent to the address listed in the award document’s specified blocks; for DLA Land, it is sent to Postal Box 3990 in Columbus, Ohio, or via email to Land.FAT.Monitor@dla.mil; for DLA Maritime, the same address and email apply with the designation maritime.fat.monitor@dla.mil; for DLA Troop Support Construction and Equipment, submissions are emailed to trpsptcandefatmonitor@dla.mil, with a physical mailing option provided if email size limits are exceeded. The solicitation is issued by the Department of Defense under the ASC SUPPLIER OPER AE AND AF DIV, with the procurement process managed through DLA systems and no set-aside designation specified.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 5 hours ago

DEADLINE

Unable to Decompose Subcontract OpportunitiesThe contract titled Unable to Decompose Subcontract Opportunities was posted on July 20, 2026, with a response deadline of July 28, 2026, and is categorized as a subcontract opportunity under the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. The solicitation number is SPE4A726T584G and the place of performance is located in Texarkana with the ZIP code 75507-5000. Despite the posting, critical details including the prime contract information could not be retrieved due to system gateway timeouts, which has prevented the identification of any potential subcontracting opportunities. The NAICS code is listed as NA, and there is no information provided regarding the type of set aside, organization type, or point of contact. The official portal for this solicitation is accessible via the provided DIBBS link.

POSTED

DEADLINE

Quality Assurance and Testing ServicesThe contract requires independent quality sampling and inspection of bushings in accordance with MIL-STD-1916 or ASQ H1331 standards, including the application of AQL classification and comprehensive traceability reporting. Work must be performed at Fort Irwin, California, with zip code 92310-9986, and is classified as a subcontract under NAICS code 541330. The offering organization is the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense, and the solicitation is open for response until July 28, 2026, with a posted date of July 20, 2026. All inspections and documentation must meet strict military and industry-defined quality protocols to ensure product conformity and full traceability throughout the process.

Engineering Services

POSTED

DEADLINE

Packaging, Marking, and Logistics for Defense ShipmentThis contract requires the provision of military-compliant packaging, labeling, and barcoding for bushings destined for Fort Irwin, California, in strict adherence to DLA and MIL-STD specifications. All shipments must meet Department of Defense standards for documentation, marking, and logistics to ensure seamless receipt and inventory control at the installation. The work is classified as a subcontract under NAICS code 493190, and performance is exclusively tied to the specified delivery location with zip code 92310-9986. The solicitation was posted on July 20, 2026, with responses due by July 28, 2026, and is managed by the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense. Participation is subject to full compliance with military logistics protocols, and all deliverables must be traceable and certified to meet federal defense shipment requirements.

Other Warehousing and Storage

POSTED

DEADLINE

Manufacture and Supply of Tapered BushingsThe contract requires the manufacture, testing, packaging, and delivery of tapered bushings identified by NSN 5365012441608, adhering strictly to specifications set by the Defense Logistics Agency, MIL-STD standards, and federal hazardous materials regulations. All work must be completed in compliance with quality and safety benchmarks to ensure suitability for military use. The item is to be delivered to Fort Irwin, California, with a postal code of 92310-9986, and the performance location is fixed at this site. The solicitation is issued as a subcontract under NAICS code 332998, indicating it pertains to other fabricated metal product manufacturing, and is managed by the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense. The opportunity was posted on July 20, 2026, with a firm response deadline of July 28, 2026. Interested parties must submit proposals through the DIBBS platform using the reference number SPE4A726T582N, and all deliverables must meet required federal compliance and logistics protocols prior to acceptance and payment.

Enameled Iron and Metal Sanitary Ware Manufacturing

POSTED

DEADLINE

Supply Chain Traceability Documentation ServicesThe contract requires the provision of comprehensive supply chain traceability documentation in full alignment with DLA Procurement Note C03, encompassing all required material certifications and detailed change management logs to ensure end-to-end visibility and compliance across the supply chain. The work is critical to maintaining integrity and accountability for defense-related materials and must be performed in accordance with stringent federal procurement standards. This subcontract is solicited under NAICS code 541611 and is performance-based at Tinker AFB, Oklahoma, with a response deadline of July 28, 2026. The contracting activity is part of the Department of Defense’s ASC Supplier Oper AE and AF Division, emphasizing the importance of secure, auditable documentation for aerospace and defense systems. Contractors must be prepared to demonstrate robust systems capable of capturing, preserving, and delivering accurate and timely traceability records throughout the product lifecycle.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Military-Compliant Packaging and Marking ServicesThe contract requires the provision of preservation, packaging, and marking services for aerospace panels compliant with MIL-STD-2073-1E and MIL-STD-129 standards, ensuring all components meet military-grade requirements for protection, identification, and readiness during storage and transport. This includes proper hazardous material labeling and comprehensive shipment documentation to support defense logistics and regulatory compliance. The work must be executed with strict adherence to federal standards governing military supply chain integrity and safety. The solicitation is issued as a subcontract under the NAICS code 493190, with performance located at Tinker Air Force Base, Oklahoma, 73145-8000. The opportunity was posted on July 20, 2026, and responses are due by July 28, 2026. The contracting entity is the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense, and while no set-aside designation is specified, bidders must be prepared to meet all defense procurement requirements including documentation, traceability, and quality assurance for aerospace components destined for military use.

Other Warehousing and Storage

POSTED

DEADLINE

Interior Aircraft Panel Liner ManufacturingThe contract requires the manufacture of two interior liner panels for aerospace use, with stringent compliance to FAA airworthiness standards and Defense Logistics Agency technical specifications. Full traceability of materials and processes is mandatory, and quality control must adhere to zero-defect sampling protocols to ensure mission-critical reliability. The work is classified as a subcontract under NAICS code 336413, indicating specialized aerospace component manufacturing, and the performance location is set at Tinker Air Force Base with a ZIP code of 73145-8000. The solicitation was posted on July 20, 2026, and responses are due by July 28, 2026, with the overseeing agency being the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. All deliverables must meet exacting defense and aviation industry benchmarks without waiver or compromise.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

Packaging, Marking, and Logistics SupportThe contract requires comprehensive packaging, marking, and logistics support services in full compliance with MIL-STD-129 for labeling and MIL-STD-2073-1E for packaging standards, ensuring government property is protected and identifiable throughout shipment. All items must be palletized according to DLA RP001 specifications to meet Department of Defense logistics requirements for efficient handling, storage, and transport. The work is to be performed at the designated place of performance in New Cumberland, Pennsylvania, with zip code 17070-5002, and is classified as a small business set-aside under the SBA’s Total Small Business Set-Aside program, restricting eligibility to qualified small businesses. The NAICS code 493190 indicates the scope falls under other transportation support activities, focusing on specialized military logistics services rather than general freight. The contract solicitation was posted on July 20, 2026, with a response deadline of July 28, 2026, and is structured as a subcontract under the Department of Defense, specifically managed by the ASC SUPPLIER OPER AE AND AF DIV. Although no point of contact or organizational details are provided, the official solicitation can be accessed via the DIBBS portal using the provided link. All work must adhere strictly to federal military standards without exception, ensuring seamless integration into the defense supply chain with accurate documentation, tamper-resistant packaging, and standardized marking for automated processing at military receiving locations.

Other Warehousing and Storage

POSTED

DEADLINE

Supply of Raw Materials and Components for Hose AssemblyThe contract demands the supply of specialized raw materials—including fuel-resistant rubber, metal fittings, and protective sleeving—strictly compliant with aerospace-grade specifications for integration into military-grade fuel hose assemblies. All components must meet rigorous performance and durability standards required for defense applications, ensuring reliability under extreme operational conditions. The materials are intended for use in critical systems where failure is not an option, necessitating adherence to exacting technical and quality control protocols throughout manufacturing and delivery. This is a small business set-aside subcontract under NAICS code 326220, exclusively available to certified small businesses as defined by the SBA. The solicitation was posted on July 20, 2026, with a firm response deadline of July 28, 2026, and performance is to be executed at the designated location in New Cumberland, Pennsylvania, with a zip code of 17070-5002. The contracting activity is managed by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, emphasizing the strategic importance of secure and high-performance supply chain components for military aerospace systems.

Rubber and Plastics Hoses and Belting Manufacturing

POSTED

DEADLINE

Manufacture of Aircraft Fuel Hose AssemblyThe contract requires the manufacture and delivery of a fuel hose assembly for aircraft in strict accordance with technical drawing NR 77272 901-366-698 and applicable military specifications, with an uncompromising mandate for zero-defect quality standards. The product must meet all performance, material, and inspection criteria defined by technical and military requirements to ensure operational safety and reliability in demanding aerospace environments. The procurement is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses qualified under SBA guidelines are eligible to bid, reinforcing the commitment to fostering small business participation in defense supply chains. The solicitation, posted on July 20, 2026, has a response deadline of July 28, 2026, and falls under NAICS code 336413 for aircraft manufacturing. The place of performance is identified as New Cumberland, Pennsylvania, with the contracting entity being the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense. While no point of contact details are provided, the official portal for submission and further information is accessible via the DIBBS platform. All proposers must ensure full compliance with military standards and delivery schedules to avoid disqualification or rejection based on quality or compliance failures.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

Spill Containment Unit Supply and PackagingThe contract requires the supply, packaging, and delivery of six spill containment units that must meet stringent military packaging and labeling standards, ensuring full compliance with defense logistics requirements. These units are intended for use in environments where hazardous material containment is critical, and strict adherence to federal specifications is mandatory to guarantee operational readiness and safety. The procurement is structured as a subcontract under the North American Industry Classification System code 339920, which pertains to other miscellaneous manufacturing, and is managed by the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense. The solicitation was posted on July 20, 2026, with a firm response deadline of July 28, 2026, leaving a narrow window for qualified suppliers to submit proposals. While the specific place of performance and point of contact details are not provided, the contract is being processed through the DLA’s DIBBS system, indicating a formal defense supply chain process. Packaging and labeling must follow Department of Defense guidelines to facilitate seamless integration into military logistics, inventory management, and field deployment procedures. Suppliers must demonstrate capability in producing units that withstand military transport and storage conditions while fully meeting all safety and regulatory compliance benchmarks.

Sporting and Athletic Goods Manufacturing

POSTED

DEADLINE