Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, December 9 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Specialized Finishing and Material Processing

Open

Federal

Response Deadline01/11/2027, 04:00:00 PM EST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for Specialized Finishing and Material Processing supports prime contractors on projects for the Department of Defense agency Navsup Weapon Systems Support. The scope of work involves performing material finishing and coating according to strict technical specifications, as well as providing precise dimensional readings and coordinate positional data necessary for annual inspection reports. All finished components must be delivered with full material certifications. To execute these requirements, the contractor must possess advanced metrology equipment and maintain CMMC compliance to ensure the secure handling of technical drawings. The performance of these services is centered in Colonia, with a response deadline set for January 11, 2027.

General Info

Subcontract for DoD material finishing, coating, and metrology services due January 11, 2027.

Agency

Department Of Defense → Navsup Weapon Systems Support

NAICS

332813 - Electroplating, Plating, Polishing, Anodizing, and Coloring

Place of Performance

Colonia, NJ, USA

Set-Aside

NONE

Documents

This scope was carved out of N00383-27-R-M059.

The full solicitation package (4 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

IDECM BOA Renewal

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 13

subcontract

Response DeadlineJan 11

Submission deadline

Response Deadline

01/11/2027, 04:00:00 PM ESTin about 2 months

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Navsup Weapon Systems Support

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Navsup Weapon Systems Support

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs material finishing and coating for prime contractors on NAVSUP Weapon Systems Support projects. Applies finishes per technical specifications and provides actual dimensional readings and coordinate positional data for annual inspection reports. Requires advanced metrology equipment and CMMC compliance for handling technical drawings. Delivers finished components with material certifications.

Similar Contracts

Same NAICS industry code

Aerospace Surface Treatment and Coating for Rotary Wing Blade Fold SetsThis subcontract involves providing specialized aerospace surface treatment and coating services for rotary wing blade fold sets on behalf of the DLA Weapons Support ASC. The scope of work focuses on industrial painting and the application of grey protective coatings specifically for case part numbers AL5824-1119RA and AL5924-1018AC. All work must be performed in strict accordance with the DLA Master List of Technical and Quality Requirements to ensure the integrity of the delivered aerospace components. The project is managed under NAICS code 332813 for the Department of Defense. Interested parties should note that the solicitation was posted on November 13, 2026, with a response deadline set for December 14, 2026. The primary objective is the delivery of high-quality, coated components that meet rigorous military specifications for aerospace hardware.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 11 hours ago

DEADLINE

in about 1 month

Precision Oxygen Cleaning for Aerospace ComponentsThis subcontract for Precision Oxygen Cleaning for Aerospace Components involves providing specialized cleaning services for prime contractors supporting DLA Aviation projects. The scope of work focuses on the removal of contaminants from Blower and Duct Assemblies intended for oxygen-rich environments. All operations must be conducted within a certified oxygen-clean facility using specialized solvents and advanced particulate and hydrocarbon detection equipment to ensure safety and performance. The project is governed by the Department of the Navy and performed in Philadelphia, Pennsylvania. Strict adherence to MIL-STD-1330 is required, and the contractor must provide a formal certification of compliance upon delivery of the certified Oxygen Clean assembly. Interested parties should note the response deadline of November 30, 2026.

Pa DLA Aviation At Philadelphia

POSTED

about 23 hours ago

DEADLINE

CARC and High-Temperature Coating ServicesThis subcontract for the DLA Weapons Support Land Supply Chain involves providing specialized chemical agent resistant coatings and high-temperature finishing services for brackets. The contractor is responsible for applying coatings and phosphate finishing in strict accordance with DCSC Drawing 16236 CS-2300-0001 and QAP 16236 SQAPCARCLTPHOS81361 specifications. To ensure compliance and quality, the service provider must utilize CARC-certified spray booths and curing equipment. The project falls under NAICS code 332813 and will be performed in New Cumberland. Interested parties must submit their responses by November 23, 2026. This effort supports prime contractors in delivering finished components that meet rigorous Department of Defense standards for chemical resistance and thermal durability.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Aerospace Component Finishing and CoatingThis subcontract for Aerospace Component Finishing and Coating involves providing specialized surface treatments, coatings, and plating for cradle assemblies on DLA Weapons Support ASC aerospace projects. The selected contractor must apply aerospace-grade finishes in strict accordance with technical drawings and DLA Master List specifications to ensure components are ready for final assembly. The project is managed by the Department of Defense under the DLA Weapons Support ASC Supplier OE and AF Division, with performance taking place at Robins Air Force Base. Due to the nature of the technical data involved, contractors must maintain ITAR and EAR compliance and adhere to ISO 9001 quality standards. Responses for this opportunity are due by November 20, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Aerospace Surface Treatment and CoatingThis subcontract for Aerospace Surface Treatment and Coating involves providing specialized surface treatment, plating, and coating services for prime contractors under Defense Logistics Agency supply contracts. The scope of work focuses on applying corrosion-resistant coatings and specialized finishes to bomb rack components utilizing industrial plating tanks and anodizing equipment. All work must strictly adhere to DLA technical and quality requirements, specifically RA001, to ensure the integrity of the aerospace hardware before delivery for final assembly. The opportunity is categorized under NAICS code 332813 and is managed by the Department of Defense through the Defense Logistics Agency. Interested parties should note that the solicitation was posted on November 12, 2026, with a response deadline set for November 23, 2026.

Defense Logistics Agency

POSTED

DEADLINE

NADCAP Certified Phosphate Coating ServicesThis subcontract, issued by the DLA Weapons Support Land Supply Chain under the Department of Defense, seeks a provider to perform specialized phosphate coating for mounting brackets. The work must be executed using industrial phosphate plating lines in strict accordance with MIL-STD-171, MIL-DTL-16232, and TT-C-490 standards. A critical requirement for this engagement is that the contractor must hold NADCAP certification from the Performance Review Institute. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 332813, with the place of performance located in New Cumberland. Interested parties must submit their responses by November 23, 2026. The primary objective is the delivery of coated mounting brackets that meet all specified military standards to support prime contractors delivering on DLA supply contracts.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Aerospace Finishing and CoatingThis subcontract for Aerospace Finishing and Coating supports the DLA Weapons Support Land Supply Chain by providing specialized surface treatments and coatings for prime contractors. The scope of work involves applying finishes that strictly adhere to TDP specifications and MIL-STD-1907(4) standards. To ensure environmental compliance, the contractor must operate without Class I Ozone Depleting Chemicals and maintain adherence to aerospace environmental standards. The project is managed under the Department of Defense with performance located in Jacksonville, Florida. Due to the nature of the components, the selected provider is required to maintain active ITAR registration. Interested parties should note the response deadline of November 20, 2026, for this effort categorized under NAICS code 332813.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

NADCAP Certified Phosphate Coating ServicesThis subcontract for NADCAP Certified Phosphate Coating Services supports prime contractors delivering for the DLA Weapons Support Land Supply Chain. The scope of work involves applying phosphate coatings to manual control levers in accordance with MIL-STD-171, MIL-DTL-16232, and TT-C-490 Types I, II, and V, as well as applying Preservative 09 to bare ferrous surfaces. The service provider must maintain PRI/NADCAP certification for phosphate chemical processes to ensure compliance with quality standards. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 332813. Responses to this solicitation are due by November 23, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

NADCAP Special Process FinishingThis subcontract, titled NADCAP Special Process Finishing, involves providing specialized surface treatments, heat treating, or non-destructive testing for valve housing components. The work supports prime contractors for the Department of Defense under the DLA Weapons Support ASC Commodities Division, with performance taking place at Tinker AFB. Contractors must execute all processes according to BAC/BSS standards and provide certifications of conformance. Essential requirements for eligibility include active NADCAP approval for the specific process being performed, as well as strict adherence to ITAR and EAR compliance regulations.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Surface Treatment and FinishingThis subcontract for Surface Treatment and Finishing involves providing protective coating and finishing services for prime contractors on DLA supply contracts. The scope of work includes sandblasting, priming, painting, and anodizing metal pole assemblies to prevent corrosion, utilizing industrial spray booths and curing ovens to deliver finished products. The project is managed under the Department of Defense and will be performed at Robins Air Force Base. Contractors must ensure strict compliance with FAR 52.223-7 regarding restrictions on the intentional addition of mercury. The solicitation was posted on November 12, 2026, with a response deadline of November 23, 2026.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Chemical Agent Resistant Coating (CARC) ApplicationThis subcontract involves the application of specialized Chemical Agent Resistant Coatings (CARC) for prime contractors supporting DLA supply contracts. The scope of work requires the application of coatings in Forest Green, Olive Drab, or Black in strict accordance with DCSC Drawing 16236 CS-2300-0001. A critical requirement of the performance is the total exclusion of hexavalent chromium and Class I ozone-depleting chemicals during the process to ensure environmental and safety compliance. Managed under the Department of Defense through the DLA Weapons Support LSO Combat Vehicles and Armament, the project focuses on delivering brackets with a certified CARC finish. The work is to be performed in Tracy, California, under NAICS code 332813. The solicitation was posted on November 12, 2026, with a response deadline of November 23, 2026.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Aerospace Surface Treatment and CoatingThis subcontract for Aerospace Surface Treatment and Coating involves providing specialized surface treatments, painting, or plating for prime contractors supporting the DLA Weapons Support ASC. The scope of work specifically requires the application of aerospace-grade coatings to aircraft access doors, part number 60716-014, in strict accordance with technical specifications and FED-STD-313. To qualify for this project, contractors must hold NADCAP accreditation and possess the necessary certifications for handling hazardous materials. The performance of the contract will take place in Tracy, California, under NAICS code 332813. Interested parties must respond by November 20, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

More opportunities from Department Of Defense → Navsup Weapon Systems Support

Same awarding agency

Precision Valve Parts and Seals SupplyThis subcontract, titled Precision Valve Parts and Seals Supply, involves providing replacement parts, seals, and precision-machined components for Linear Direct Valves to support NAVSUP naval component projects. The scope focuses on sourcing high-grade alloys and internals that adhere to OEM or government specifications, specifically for NSN 4810-01-168-9476 GF. All deliverables, whether provided as individual parts or complete component kits, must be delivered directly to the designated repair facility. Managed under the Department of Defense for the Navsup Weapon Systems Support agency, the contract mandates strict compliance with Trade Agreements and Buy American clauses to ensure products are U.S.-made or from qualifying countries. The opportunity falls under NAICS code 332911, with a response deadline set for December 14, 2026.

Industrial Valve Manufacturing

POSTED

about 16 hours ago

DEADLINE

in about 1 month

Linear Direct Valve Repair and ModificationThis subcontract with Navsup Weapon Systems Support under the Department of Defense involves the teardown, evaluation, repair, and modification of Linear Direct Valves for NSN 4810-01-168-9476 GF. The scope of work includes disassembling valves to assess internal conditions, conducting technical inspections, and utilizing precision machining and functionality testing equipment to restore the components to operational specifications. The final deliverable consists of six repaired or modified valves equipped with DLR labels. Compliance requirements include the provision of Material Safety Data Sheets for any hazardous materials used and the application of Unique Identification for any items valued over 5,000 dollars. The project falls under NAICS code 811210, with a response deadline set for December 14, 2026.

Electronic and Precision Equipment Repair and Maintenance

POSTED

about 16 hours ago

DEADLINE

in about 1 month

Solicitation # N0038327QAA17

Solicitation NO00383-27-Q-AA17, issued by NAVSUP Weapon Systems Support Philadelphia, is a request for quotations for the teardown, evaluation, repair, and modification of two Window Assemblies (NSN 6810-01-617-0785). The requirement specifies a delivery timeframe of 90 days and an induction period of one year from the date of the order. Performance is governed by strict Repair Turnaround Time (RTAT) requirements, with physical receipt tracked via the Commercial Asset Visibility (CAV) system. The government will assess consideration if the negotiated RTAT is not met, and any assets received after the 365-day induction expiration date require a bilateral agreement for repair. The contract will be awarded to a single responsible offeror based on a determination of the most advantageous offer, with past performance weighted as more important than price. Technical requirements include compliance with ISO 9001 Quality Management Systems and specific calibration standards. Packaging must adhere to MIL-STD-2073 and MIL-STD-129, with specific requirements for Depot Level Repairable (DLR) labeling and Item Unique Identification (IUI) per MIL-STD-130. Administrative requirements include the use of Wide Area Workflow (WAWF) for invoicing and payment, and adherence to Buy American and cybersecurity regulations. Final inspection and acceptance will be conducted by the Contract Administration Office at the contractor's facility.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 16 hours ago

DEADLINE

in about 1 month

CABLE ASSEMBLY,ROTA

Solicitation # N0038327QAA18

Solicitation N00383-27-Q-AA18 is a fixed-price request for quotations issued by NAVSUP Weapon Systems Support for the overhaul, upgrade, repair, testing, and inspection of Cable Assembly, ROTA (NSN 1680-01-661-7957, P/N 5217008-110). The objective is to restore assets to a Ready for Issue condition, ensuring they perform reliably in operational environments. The contractor is responsible for providing all necessary facilities, labor, materials, and tooling, with a specific prohibition on the use of MIL-W-81381 wire in favor of SAE-AS22759 series wire. Performance is measured by Repair Turnaround Time (RTAT), and contractors must accurately report transactions via the Commercial Asset Visibility system within five business days of receipt. The government intends to make a single award based on the most advantageous offer, prioritizing past performance over price. Technical requirements include compliance with ISO 9001 or SAE AS9100 quality systems, MIL-STD-130 markings, and MIL-STD-2073 packaging. The contract includes a one-year induction period from the date of award, with a general delivery requirement of 90 days. Administrative requirements mandate the use of Wide Area Workflow for invoicing and payment, and the contractor must adhere to strict guidelines regarding Beyond Economical Repair (BER) and Over and Above Repair (OAR) determinations, both of which require DCMA concurrence.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 16 hours ago

DEADLINE

in about 1 month

48--VALVE,LINEAR,DIRECT, IN REPAIR/MODIFICATION OF

Solicitation # N0038327QHA23

Solicitation N00383-27-Q-HA23 is a Request for Quotations issued by Navsup Weapon Systems Support for the teardown, evaluation, repair, and modification of six linear direct valves (NSN 7RH 4810-01-168-9476 GF). The contract requires delivery to DLA Distribution San Diego within 90 days, with FOB Destination terms. The government intends to make a single award based on the most advantageous offer, prioritizing past performance over price. Past performance will be evaluated using the DoD Supplier Performance Risk System (SPRS), while price serves as a secondary factor. Contractors must adhere to strict quality and calibration standards, such as ISO 9001 or SAE AS9100, and NCSL Z540.3 or ISO 10012. Packaging and marking must comply with MIL-STD-2073 and MIL-STD-129, including specific requirements for Depot Level Repairable (DLR) labels and ISPM 15 wood packaging standards. Mandatory reporting via the Commercial Asset Visibility Repairables Portal (CAV RP) is required, with registration necessary within 10 days of contract receipt. Payments are processed electronically through the Wide Area WorkFlow (WAWF) system. The procurement incorporates various FAR and DFARS clauses, including Buy American requirements and safeguarding of covered defense information.

Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 16 hours ago

DEADLINE

in about 1 month

61--POWER SUPPLY, IN REPAIR/MODIFICATION OF

Solicitation # N0038327QFA19

POSTED

about 16 hours ago

DEADLINE

16--CONTROL PANEL,AIRCR, IN REPAIR/MODIFICATION OF

Solicitation # N0038327QFA18

POSTED

about 16 hours ago

DEADLINE

16--POWER AMPLIFIER ASS, IN REPAIR/MODIFICATION OF

Solicitation # N0038327RDA17

POSTED

about 16 hours ago

DEADLINE

in about 1 month

16--INVERTER,AIRCRAFT,M, IN REPAIR/MODIFICATION OF

Solicitation # N0038327RNA26

POSTED

about 16 hours ago

DEADLINE

in about 1 month

16--ACTUATOR,PITCH LOCK, IN REPAIR/MODIFICATION OF

Solicitation # N0038327QFA16

POSTED

about 16 hours ago

DEADLINE

61--PANEL,POWER DISTRIB, IN REPAIR/MODIFICATION OF

Solicitation # N0038327QFA14

POSTED

about 16 hours ago

DEADLINE

16--CONTROL PANEL,AIRCR, IN REPAIR/MODIFICATION OF

Solicitation # N0038327QFA17

POSTED

about 16 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Industrial Preservation and Coating Services

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 1 month ago

CLOSED

Precision Plating and Finishing for Grooved Pins

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 1 month ago

CLOSED

Aerospace Coating and Finishing Services

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 1 month ago

CLOSED

Industrial Coating and Preservation Services

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 1 month ago

CLOSED

Specialized Coating and Finishing for Mounting Brackets

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 1 month ago

CLOSED

Aerospace Surface Treatment and Finishing

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 1 month ago

CLOSED

High-Temperature Stress Relieving for Refractory Alloys

NASA Shared Services Center

POSTED

about 1 month ago

CLOSED

Specialized Metal Finishing and Coating

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 1 month ago

CLOSED

Aerospace Specialized Marking and Packaging

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 1 month ago

CLOSED

Aerospace Surface Treatment and Finishing

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 1 month ago

CLOSED

Specialized Surface Treatment and Finishing for Gun Shield

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 1 month ago

CLOSED

Cadmium or Zinc Plating Services

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 1 month ago

CLOSED

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Get full access

Join 750+ contractors already using CLEATUS