Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Specialized Finishing: Passivation and Coating

Active

Federal

Response Deadline09/25/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for Specialized Finishing: Passivation and Coating involves providing surface treatment services for prime contractors delivering aerospace components to the DLA Land and Maritime agency. The scope of work includes the chemical passivation of Type 304 Stainless Steel to eliminate exogenous iron, followed by the application of two coats of Epoxy Polyamide Primer. All operations must strictly adhere to Navy and aerospace finish specifications as well as the Hazard Communication Standard 29 CFR 1910.1200. The contract is managed by the Fluid Handling Division of the Department of Defense under NAICS code 332722. Performance of these services will take place in San Diego, California. The solicitation was posted on September 14, 2026, with a response deadline of September 25, 2026.

General Info

Subcontract for aerospace component passivation and epoxy coating services in San Diego, California.

Agency

Department Of Defense → FLUID HANDLING DIVISIONView Agency

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

SAN DIEGO, CA, 92136-3581, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7M3-26-T-9117.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

PRODUCTION LOT TESTING

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedSep 14

subcontract

Response DeadlineSep 25

Submission deadline

Response Deadline

09/25/2026, 05:00:00 PM UTCin 10 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → FLUID HANDLING DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → FLUID HANDLING DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs surface treatment for prime contractors delivering DLA Land and Maritime aerospace components. Executes chemical passivation of Type 304 Stainless Steel to remove exogenous iron and applies two coats of Epoxy Polyamide Primer. Adheres to Hazard Communication Standard (29 CFR 1910.1200) and Navy/Aerospace finish specifications. Delivers passivated and primed components.

Similar Contracts

Same NAICS industry code

Manufacture and Supply of Close Tolerance Screws (NAS7103-8)This subcontract involves the manufacture and supply of 286 precision-engineered close tolerance screws, specifically NSN 5305014358742, for prime contractors supporting DLA Aviation supply contracts. The items must be produced to NAS7103-8 standards, ensuring 3A and 3B thread dimensional conformance in accordance with FFD-STD-H28/20 System 22. The project requires the use of precision threading and inspection equipment to meet strict technical specifications. All items must undergo bare item marking per MIL-STD-130N and be packaged according to ASTM D3951. This requirement is managed by the ASC Commodities Division of the Department of Defense, with performance taking place in New Cumberland, Pennsylvania.

ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

Retaining Spring Supplier (NSN 5360-01-128-5490)This subcontract involves the manufacture or sourcing of 2,109 retaining springs under NSN 5360-01-128-5490 for prime contractors working on DLA Land and Maritime fluid handling projects. The selected supplier must possess a valid CAGE code and the necessary testing equipment to perform Contractor First Article Testing in accordance with FAR 52.209-3. All deliverables must adhere to MIL-STD-129 packaging and marking requirements. The project is managed by the Department of Defense Fluid Handling Division, with the place of performance located in Greensboro, North Carolina. The contract requires the successful delivery of all 2,109 units following a validated First Article Test. Interested parties must respond by September 25, 2026.

FLUID HANDLING DIVISION

POSTED

about 18 hours ago

DEADLINE

Supply of Fastener Receptacles (NSN 5325017031698)This subcontract with the Department of Defense ASC Commodities Division involves the procurement or manufacture of 15 specialized fastener receptacles, specifically part number IT147R4-7 from Avibank Mfg., Inc. The contractor is responsible for physical identification and bare item marking according to RQ017 standards, as well as the removal of non-accepted government identification per RQ011. All deliverables must adhere to MIL-STD-129 and RP001 packaging standards. The final shipment of 15 units is to be delivered to Fort Carson, Colorado. The contract falls under NAICS code 332722 and is associated with National Stock Number 5325017031698.

ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

Supply of Union Nuts (NSN 4730016012706)This subcontract involves the supply of 16 precision-manufactured union nuts for prime contractors supporting the Department of Defense Nuclear Reactor Program. The components must be produced using CRES 316 stainless steel in strict accordance with TDP Rev A Gen 2 and Basic Drawing NR 80064 1385884, Revision N. Quality assurance is maintained through zero-based sampling plans that comply with MIL-STD-1916 or ASQ H1331. The agreement requires full compliance with DFARS 252.204-7012 and DFARS 252.223-7008 regulations. Performance of the contract is centered in New Cumberland, Pennsylvania, under NAICS code 332722. The solicitation was posted on September 14, 2026, with a response deadline of September 25, 2026.

NUCLEAR REACTOR PROGRAM

POSTED

about 18 hours ago

DEADLINE

Manufacturing of Straight Headed PinsThis subcontract involves the manufacturing of precision-machined straight headed pins for prime contractors supporting the Department of Defense, specifically the ASC Supplier Oper AE and AF Div. The scope of work requires CNC machining and fabrication to meet strict technical and quality standards identified by R or I numbers, with a specific prohibition against the use of additive manufacturing. The project is based in New Cumberland, Pennsylvania, under NAICS code 332722. Interested parties must respond by September 22, 2026, to provide finished hardware that adheres to all specified technical requirements.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 18 hours ago

DEADLINE

Supply of Bolts (NSN 5306-00-5826419 / Part AN178-23A)This subcontract through the ASC Commodities Division of the Department of Defense involves the manufacture or procurement of 22 specialized bolts, identified as NSN 5306-00-5826419 and Part AN178-23A. The items must be produced according to FED-STD-H28/20 System 22 and TDP Rev C Gen 3, with inspections conducted per MIL-STD-1916 or ASQ H1331. Performance takes place at Fort Campbell, and the contract requires strict adherence to DFARS 252.225-7001 and MIL-HDBK-57 symbol registration. All units must be packaged and marked in accordance with MIL-STD-2073-1E and MIL-STD-129. The opportunity was posted on September 14, 2026, with a response deadline of September 22, 2026. This procurement falls under NAICS code 332722 and is intended for prime contractors supporting Defense Logistics Agency supply contracts.

ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

Supply of Socket Head Cap Screws (NSN 5305-01-661-2481)This subcontract through the ASC Commodities Division of the Department of Defense involves the supply of 12,000 socket head cap screws conforming to NSN 5305-01-661-2481. These components are intended for prime contractors delivering DLA supply contracts to the Portsmouth Naval Shipyard. The delivery terms are established as FOB Origin. The contractor is required to adhere to strict military standards for marking and packaging, specifically MIL-STD-130N for item marking, MIL-STD-129 for shipment marking, and MIL-STD-2073-1E and RP001 for packaging. The project falls under NAICS code 332722 and is to be performed in Portsmouth, zip code 03801-5000.

ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

Supply of Self-Locking Spline NutsThis subcontract through the ASC Commodities Division of the Department of Defense involves the supply of self-locking spline nuts for prime contractors fulfilling DLA supply contracts. The provider is responsible for manufacturing or sourcing these components in strict accordance with the DLA Master List of Technical and Quality Requirements. Key operational requirements include performing physical identification and bare item marking per RQ017 and adhering to the DLA Packaging Requirements for Procurement under RP001. The contract focuses on the delivery of marked and packaged quantities of these specific nuts under NAICS code 332722, with a response deadline of September 22, 2026.

ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

Supply of Machine Screws (NSN 5305015878077)This subcontract with the Defense Logistics Agency involves the manufacture and supply of machine screws meeting NSN 5305015878077 and RA001 technical specifications. The provider is responsible for delivering hardware that adheres to MIL-STD-129 marking standards and ensures all preservation and packaging are mercury-free in accordance with IP056. The contract falls under NAICS code 332722 and requires the delivery of physical machine screws as detailed in the specific contract CLINs. The solicitation was posted on September 14, 2026, with a response deadline of September 22, 2026.

Defense Logistics Agency

POSTED

about 18 hours ago

DEADLINE

Supply of Machine Bolts (P/N BACB30LE3K19)This subcontract involves the supply of 53 high-strength machine bolts, identified by part number BACB30LE3K19 and NSN 5306016529359, for prime contractors supporting DLA Aviation supply contracts. The performance takes place at Tinker AFB, and the contractor is responsible for manufacturing or sourcing the bolts while ensuring all items are marked according to MIL-STD-129 and palletized per RP001. To qualify, the provider must maintain an ISO 9001:2015 quality system and strictly adhere to DFARS Buy American standards for Critical Application Items. This requirement is managed by the ASC Commodities Division of the Department of Defense under NAICS code 332722, with a response deadline of September 22, 2026.

ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

Supply of Internal Wrenching Bolts (NSN 5306005845082)This subcontract involves the manufacture or procurement of 107 internal wrenching bolts for prime contractors supporting the Department of Defense Aviation Supply Chain. All units must strictly adhere to the technical specifications and Technical Data Package associated with NSN 5306005845082. The contractor is responsible for performing identification marking in accordance with MIL-STD-130N, which includes the application of the manufacturer logo and lot number. Quality verification must be conducted using calibrated measuring and test equipment as specified by RQ001 and RQ006. Performance of this contract is centered in Cherry Point.

AVIATION SUPPLY CHAIN

POSTED

about 18 hours ago

DEADLINE

Manufacturing of Key Washers (PN: 5310-00-137-6522)This subcontract involves the manufacture and supply of 110 Key Washers, part number 5310-00-137-6522, for prime contractors under DLA supply contracts. The work requires precision machining and turning using CNC turning centers or screw machines to meet specific technical requirements. All production must comply with the DLA Master List of Technical and Quality Requirements and adhere to US Country of Origin restrictions. The contract is managed by the Department of Defense through the ASC Commodities Division, with performance taking place in Tracy, California. The project falls under NAICS code 332722 and requires the delivery of 110 finished units. The solicitation was posted on September 14, 2026, with a response deadline of September 17, 2026.

ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

More opportunities from Department Of Defense → FLUID HANDLING DIVISION

Same awarding agency

Valve Parts Kit Supplier (NSN 012485103)This subcontract through the Department of Defense Fluid Handling Division requires the manufacture or sourcing of 68 specialized valve parts kits for prime contractors supporting DLA supply contracts. The kits must include valve seats meeting NSN 012485103 and ESA acceptability standards, with the option to utilize L31 Additive Manufacturing processes from June 2018. All deliverables must be packaged and marked according to SOW standards and delivered FOB Origin. The performance of this contract is centered in New Cumberland, Pennsylvania, under NAICS code 332911.

Industrial Valve Manufacturing

POSTED

about 18 hours ago

DEADLINE

Supplier of Tube Caps (NSN 4730016257090)This subcontract involves the manufacture or sourcing of 372 specialized tube caps, identified by NSN 4730016257090, for prime contractors supporting the Department of Defense Fluid Handling Division. The supplier must ensure all units conform to the DLA Master List of Technical and Quality Requirements and adhere to RP001 packaging standards. Notably, additive manufacturing is prohibited unless specific authorization is granted. The contract falls under NAICS code 332999 and requires delivery of the components to the specified DLA destination in Cherry Point. The response deadline for this opportunity is September 25, 2026.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 18 hours ago

DEADLINE

Production Lot Testing (PLT) ServicesThe Production Lot Testing (PLT) Services subcontract involves providing technical and quality verification testing for prime contractors supplying aerospace parts to the DLA Land and Maritime. The selected provider will be responsible for executing dimensional inspections and material verification on samples chosen by the Quality Assurance Representative to validate Critical Safety Items. This contract, managed by the Department of Defense Fluid Handling Division, requires the coordination of test schedules with the Contracting Officer and the delivery of comprehensive test reports and validation data. The work is to be performed in San Diego, California, under NAICS code 541380, with a response deadline of September 25, 2026.

Testing Laboratories and Services

POSTED

about 18 hours ago

DEADLINE

Precision Machining: Elbow, Boss (F/A-18 Application)This subcontract involves the precision machining of Elbow and Boss components for F/A-18 applications, supporting prime contractors for DLA Land and Maritime aerospace parts. The project requires the production of 20 machined units using Type 304 Stainless Steel, utilizing CNC milling and turning to achieve specific female and male threads along with a detonating cord groove. The manufacturer must be capable of producing Navy Identified Critical Safety Items to strict aerospace tolerances. This work is managed by the Fluid Handling Division of the Department of Defense and is to be performed in San Diego, California.

POSTED

about 18 hours ago

DEADLINE

Manufacture and Supply of Seal Retainers (P/N 24-1143-11)This subcontract with the Department of Defense Fluid Handling Division involves the manufacture and supply of seal retainers, specifically part number 24-1143-11, for aerospace projects. The items are classified as Critical Application Items and must be produced using precision CNC machining. All deliverables must strictly adhere to ASME Y14.5 for dimensional accuracy and ASME B46.1 for surface textures, while ensuring full compliance with DFARS 252.223-7008 regarding the restriction of Hexavalent Chromium. The performance of this contract is centered at Tinker AFB, zip code 73145-8000, under NAICS code 332721. The solicitation was posted on September 14, 2026, with a response deadline of September 25, 2026. The primary objective is the delivery of finished seal retainers that meet all specified material and dimensional requirements for prime contractors.

Precision Turned Product Manufacturing

POSTED

about 18 hours ago

DEADLINE

Supply of Quick Disconnect Coupling Halves (NSN 4730-01-241-8819)This subcontract involves the supply of 80 Quick Disconnect Coupling Halves meeting NSN 4730-01-241-8819 specifications for prime contractors on DLA First Destination Transportation projects. The selected provider is responsible for fabricating or sourcing the components and ensuring all items adhere to RP001 DLA Packaging Requirements for Procurement. The contract is managed by the Fluid Handling Division of the Department of Defense, with performance taking place in Albany. Logistics are coordinated through the FDT program for Government-Arranged Transportation. The solicitation was posted on September 14, 2026, with a response deadline of September 25, 2026, under NAICS code 332999.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 18 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services is a total small business set-aside under NAICS code 488510, managed by the Department of Defense Fluid Handling Division. The contractor is responsible for providing specialized military-grade packaging and marking for prime contractors on DLA Land and Maritime supply contracts, with final delivery to the DLA Distribution DDSP New Cumberland Facility. The scope of work requires strict adherence to MIL-STD-129 for markings and MIL-STD-2073-1E for packaging, specifically utilizing QUP 001 and Pres Mthd 10. Additionally, the contractor must ensure all hazardous material labeling complies with DFARS 252.223-7001. The solicitation was posted on September 14, 2026, with a response deadline of September 25, 2026.

Freight Transportation Arrangement

POSTED

about 18 hours ago

DEADLINE

Supply of Quick Disconnect Coupling Halves (NSN 4730-01-355-7652)This subcontract involves the supply of 57 Quick Disconnect Coupling Halves for prime contractors working on DLA Land and Maritime fluid handling projects. The contractor is responsible for manufacturing or sourcing components that strictly adhere to NSN 4730-01-355-7652 specifications. All deliverables must comply with the DLA Master List of Technical and Quality Requirements (RA001), with packaging and marking following MIL-STD-2073-1E and MIL-STD-129 standards respectively. The contract is a total small business set-aside under NAICS code 333618 for the Department of Defense Fluid Handling Division. Performance will take place in New Cumberland, Pennsylvania, with delivery terms set as FOB Origin. The solicitation period opens on September 14, 2026, and closes on September 25, 2026.

Other Engine Equipment Manufacturing

POSTED

about 18 hours ago

DEADLINE

Supply of Flared Pipe CollarsThis subcontract is for the procurement and delivery of one Flared Pipe Collar, identified as a Critical Application Item, for the Department of Defense Fluid Handling Division. The required hardware must meet NSN 4730016286522 and correspond to reference part numbers T001412530PP or V8300500PP from The Hellan Strainer Co. The contractor must provide a valid CAGE code and ensure full compliance with FAR 52.204-24 and NIST SP 800-171 standards. The item is to be delivered to a performance location in APO 96694, with a response deadline of September 25, 2026.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 18 hours ago

DEADLINE

Supply of Tube-to-Hose Elbows (NSN 4730015891762)This subcontract with the Department of Defense Fluid Handling Division involves the supply of 12 tube-to-hose elbows meeting NSN 4730015891762 specifications for DLA Land and Maritime projects. The contractor is responsible for manufacturing or sourcing the components, performing quality control, and ensuring all packaging and labeling adhere to MIL-STD-129 and RP001 palletization standards. Additionally, the contractor must comply with RQ011 regarding the removal of government identification. The project is categorized under NAICS code 332919 and will be performed in New Cumberland, Pennsylvania. The solicitation was posted on September 14, 2026, with a response deadline of September 25, 2026. The final deliverable consists of 12 packaged and labeled elbows delivered according to the specified government standards.

Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 18 hours ago

DEADLINE

Supplier of Air Duct Hoses (NSN 4720016501691)This subcontract involves the supply of 18 white air duct hoses, each featuring an 8.000 inch inner diameter and a 36.00 inch length, for prime contractors supporting DLA Land and Maritime supply contracts. The selected provider must manufacture or source these items and conduct Contractor First Article Testing in accordance with SQAP MIL-PRF-32107. Final deliverables include the 18 hoses and a corresponding First Article Test report. The project requires strict adherence to packaging and marking standards per MIL-STD-2073-1E and MIL-STD-129, with palletization following RP001 guidelines. Managed by the Fluid Handling Division of the Department of Defense under NAICS code 334418, the performance of this contract is centered in New Cumberland, Pennsylvania. Responses are due by September 25, 2026.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 18 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 650+ contractors already using CLEATUS