Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Specialized Hardware and Fastener Supply

Open

Federal

Response Deadline11/16/2026, 12:00:00 PM EST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract opportunity, issued by the Department of Defense under the DLA Weapons Support Fluid Handling Division, involves the supply of standard and specialized fasteners, O-rings, and seals. The selected provider will be responsible for sourcing and kitting hardware specifically for NSN 4940-01-562-9617 to support prime contractors. Strict adherence to the Buy American Act and the provision of material traceability certifications are mandatory requirements for this engagement. The contract is designated as a Total Small Business Set-Aside under NAICS code 332722, with performance taking place in New Cumberland. Interested parties must submit their responses by November 16, 2026. The primary objective is the delivery of fully kitted hardware components that meet all specified technical and regulatory standards.

General Info

DoD small business subcontract for kitted fasteners and seals due November 16, 2026.

Agency

Department Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer Manufacturing

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

SBA

Documents

This scope was carved out of SPE7M4-27-T-2307.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

ADAPTER KIT, TEST

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 5

subcontract

Response DeadlineNov 16

Submission deadline

Response Deadline

11/16/2026, 12:00:00 PM ESTin 11 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies standard and specialized fasteners, O-rings, and seals for prime contractors delivering DLA supply contracts. Sources and kits hardware per the parts list for NSN 4940-01-562-9617. Requires Buy American Act compliance and material traceability certifications. Delivers kitted hardware components.

Similar Contracts

Same NAICS industry code

Supply of Hexagon Head Cap ScrewsThis subcontract, managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division, involves the supply of 250 Hexagon Head Cap Screws identified by NSN 5305015885151. The contract is designated under NAICS code 332722 and requires the supplier to provide industrial fasteners to prime contractors. Performance for this contract will take place in New Cumberland, Pennsylvania. The agreement mandates strict adherence to the Berry Amendment and the Buy American Act to ensure all materials meet domestic origin requirements. Shipping will be handled according to FOB Origin and First Destination Transportation terms. The solicitation was posted on November 5, 2026, with a response deadline of November 13, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

Manufacturer of Flat Washers (NSN 5310-00-178-0607)This subcontract involves the manufacture and delivery of 48 flat washers for prime contractors supporting DLA Weapons Support ASC projects. The parts must be produced according to NSN 5310-00-178-0607 technical data and adhere to either SAE AS9003 or ISO 9001 quality systems. All items must be packaged and marked in accordance with ASTM D3951, RP001, and MIL-STD-129 standards, with final delivery handled as FOB Origin to Robins Air Force Base. To be eligible, the contractor must maintain CMMC Level 2 certification and ensure full compliance with ITAR and EAR regulations. Additionally, access to the US/Canada Joint Certification Program is required. The opportunity is categorized under NAICS code 332722 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

Precision Manufacture of Shoulder Bolts (NSN 5306-01-053-0198)This subcontract involves the precision manufacture of 245 shoulder bolts for the DLA Weapons Support ASC Commodities Division under NSN 5306-01-053-0198. The contractor is responsible for fabricating the units according to Basic Drawing NR 55820 43390 Revision E and ensuring all items meet quality control standards per MIL-STD-1916 or ASQ H1331. The project requires support for source inspection of critical application items and final delivery of packaged bolts to DLA Distribution Cherry Point in accordance with MIL-STD-2073-1E. To be eligible, the contractor must hold US/Canada Joint Certification Program certification and maintain CMMC Level 2 compliance. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 332722. The performance of the contract is centered in Cherry Point, North Carolina.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

Precision Manufacturer - Flat Washers (NSN 5310-01-592-9749)This subcontract involves the manufacture and supply of 12 high-precision flat washers for the DLA Weapons Support ASC Commodities Division. The items must be produced according to Basic Drawing NR 43689 709-5486674 Revision M, with strict prohibitions against the use of mercury or additive manufacturing. All materials and processes must comply with the Buy American Act and the Berry Amendment, and the final products must be packaged in accordance with MIL-STD-2073-1E and MIL-STD-129. Qualified providers must possess precision machining equipment and hold JCP certification along with either SAE AS9003 or ISO 9001 certification. The performance location for this contract is Tracy, California. Interested parties must submit their responses by November 13, 2026, for this Department of Defense requirement under NAICS code 332722.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

Supply of Hexagon Head Cap Screws (NSN 5305-01-60-47693)This subcontract involves the supply of 63 units of hexagon head cap screws, specifically matching NSN 5305-01-60-47693, to support prime contractors for the DLA Weapons Support ASC Commodities Division. The deliverables must strictly adhere to DLA Packaging Requirements RP001 and MIL-STD-2073-1E, while following marking standards RQ017 and MIL-STD-129. Performance for this contract is based in New Cumberland. To be eligible, the provider must maintain ITAR and EAR compliance, hold US/Canada Joint Certification Program certification, and meet CMMC Level 2 cybersecurity standards. The opportunity was posted on November 5, 2026, with a response deadline of November 13, 2026, falling under NAICS code 332722.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

Supply of Panel Fastener Inserts (NSN 5325001232780)This subcontract involves the production and supply of 458 specialized panel fastener inserts under NSN 5325001232780 for the DLA Weapons Support ASC Commodities Division. The contractor is responsible for ensuring all hardware meets Class 3A and 3B thread specifications per FED-STD-H28/20 and adheres to MIL-STD-130N marking requirements. Quality assurance must be conducted in accordance with MIL-STD-1916 or ASQ H1331 standards. The agreement mandates strict adherence to the Berry Amendment and the Buy American Act, alongside compliance with NIST SP 800-171 for data security. Performance of the contract will take place in Jacksonville, Florida, under NAICS code 332722.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

Supply of Flat Washers (NSN 5310-01-277-5657)This subcontract involves the manufacture or procurement of 947 flat washers under NSN 5310-01-277-5657 for the DLA Weapons Support ASC Commodities Division. The contractor is responsible for ensuring all units adhere to specific technical drawings and meet rigorous quality sampling standards per MIL-STD-1916 or ASQ H1331. Additionally, all items must be marked and packaged in accordance with MIL-STD-129, MIL-STD-2073-1E, and DLA RP001 guidelines. To be eligible, the provider must maintain SAE AS9003 or ISO 9001 certification and demonstrate cybersecurity compliance with NIST SP 800-171. The project is categorized under NAICS code 332722, with performance taking place in New Cumberland. The response deadline for this requirement is November 13, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

Precision Angle Valve FabricationThis subcontract involves the precision fabrication of two Angle Valves, identified by NSN 4820-00-177-0272, for the DLA Weapons Support Nuclear Reactor Program. The manufacturer must strictly adhere to Basic Drawing 80020 A509519, utilizing precision machining to meet nuclear-grade tolerances. Additive manufacturing is explicitly prohibited for this project. The selected contractor must hold SAE AS9003 or ISO 9001 certification and be approved for ITAR/EAR export-controlled data and the US/Canada Joint Certification Program. Performance will take place in San Diego, California, with a response deadline of November 16, 2026.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 9 hours ago

DEADLINE

Flat and Lock Washer Supplier (NSN 5310-01-360-0983)This subcontract involves the supply of 162 flat and lock washers to the DLA Distribution center in Albany, Georgia. The selected supplier is responsible for manufacturing or sourcing these components in strict accordance with the Buy American Act and the DLA Master List of Technical and Quality Requirements. Rigorous quality control and inspection processes must be implemented to ensure full compliance with NSN 5310-01-360-0983. This requirement is managed under NAICS code 332722 for the DLA Weapons Support ASC Commodities Division within the Department of Defense.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

Supply of Straight Headless Pins (NSN 5315009265761)This subcontract involves the manufacture or sourcing of 51 units of straight headless pins, specifically NSN 5315009265761, for prime contractors supporting the Defense Logistics Agency Weapons Support ASC Commodities Division. The hardware is designated for critical applications and must be produced in accordance with SAE AS9390 Revision D. Performance takes place in San Diego, California, under NAICS code 332722. The contractor is responsible for adhering to strict marking and packaging standards, specifically RQ017 for bare item marking and RP001 and MIL-STD-2073-1E for packaging. Additionally, the contract mandates strict cybersecurity and data protection compliance, requiring adherence to DFARS 252.204-7012 and NIST SP 800-171 standards.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

Socket Head Cap Screw SupplierThis subcontract opportunity is for a supplier to provide socket head cap screws to prime contractors supporting the Department of Defense, specifically for the DLA Weapons Support ASC Commodities Division. The selected provider will be responsible for manufacturing or sourcing fasteners that adhere to strict grade and alloy requirements, ensuring all hardware meets DLA specifications. Key operational requirements include strict compliance with Unit of Issue and Quantity per Unit Pack standards, as well as the proper packaging and labeling of all delivered screws. The place of performance for this contract is located in Tracy, California, under NAICS code 332722.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

Hexagon Head Cap Screw Supplier (NSN 5305009477047)This subcontract involves the procurement of 177 hexagon head cap screws to support prime contractors on projects for the DLA Weapons Support ASC Commodities Division. The supplier is responsible for manufacturing or sourcing the screws in strict accordance with NSN 5305009477047 and the DLA Master List of Technical and Quality Requirements. All items must be marked per MIL12222J and packaged according to ASTM D3951 and RP001 standards, including MIL-STD-129 labeling. To be eligible, the contractor must maintain SAE AS9003 or ISO 9001 certification and ensure full compliance with the Buy American Act. The final deliverable consists of 177 properly packaged and labeled screws delivered to the designated performance location in New Cumberland. This opportunity falls under NAICS code 332722 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

Same awarding agency

O-Ring Supply (NSN 5331-01-013-9653)This subcontract involves the manufacture and supply of 138 asbestos-free O-rings for prime contractors supporting the DLA Weapons Support Fluid Handling Division. The items must be produced according to NSN 5331-01-013-9653 specifications and delivered FOB Origin to Tracy, California. The contractor is required to adhere to strict quality assurance and packaging standards, including MIL-STD-1916 or ASQ H1331 for quality, and MIL-STD-2073-1E and MIL-STD-129 for marking. All items must be sealed in MIL-DTL-117 waterproof, greaseproof, and opaque bags. Additionally, the supplier must maintain full compliance with the Buy American Act and the Berry Amendment.

All Other Plastics Product Manufacturing

POSTED

about 9 hours ago

DEADLINE

MIL-SPEC Packaging and Palletization ServicesThis subcontract involves providing specialized military-grade packaging, marking, and palletization services for the Department of Defense, specifically under the DLA Weapons Support Fluid Handling Division. The scope of work requires the processing of 1,863 tube caps to be delivered via FOB Origin shipment. All activities must strictly adhere to military standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization, utilizing specific unit and intermediate container configurations. The project is categorized under NAICS code 333613 and will be performed in New Cumberland, Pennsylvania. Interested parties should note the response deadline of November 16, 2026, for this specialized logistics requirement supporting prime contractors on DLA projects.

Mechanical Power Transmission Equipment Manufacturing

POSTED

about 9 hours ago

DEADLINE

Manufacturer of Steel Tube Caps (NSN 4730013592430)This subcontract involves the manufacture and delivery of 1,863 steel tube caps for the Department of Defense, specifically supporting the DLA Weapons Support Fluid Handling Division. The contractor is responsible for fabricating the components using precision machining or forming equipment to ensure full compliance with technical standards SAE J1453-3 and SAE J1453-1-2012. The agreement mandates strict adherence to the Buy American Act and prohibits the use of Class I ozone depleting chemicals during production. Performance of the contract will take place in New Cumberland, Pennsylvania, under NAICS code 332710.

POSTED

about 9 hours ago

DEADLINE

Metal Tube Assembly Manufacturer/SupplierThis subcontract involves the manufacture and supply of 11 metal tube assemblies for the Department of Defense, specifically supporting the DLA Weapons Support Fluid Handling Division. The supplier is responsible for ensuring all units meet NSN 4710016052191 specifications and adhere to strict logistics requirements, including ASTM D3951 packaging, MIL-STD-129 marking and labeling, and RP001 palletization. Performance for this contract is based in San Diego, California. To qualify, the contractor must maintain DFARS compliance for the safeguarding of covered defense information and complete a CMMC Level 2 self-assessment. The opportunity was posted on November 5, 2026, with a response deadline of November 16, 2026, falling under NAICS code 332999.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 9 hours ago

DEADLINE

Supplier of Critical Application Breathing Air HosesThis subcontract involves the supply of five critical application breathing air hoses for the DLA Weapons Support Fluid Handling Division. The required hardware must match NSN 4720014540367 and Hydraflow part number 57207-5. Delivery is specified as FOB Origin to the DLA Distribution Depot Oklahoma, with the place of performance located at Tinker AFB. The supplier must adhere to strict regulatory standards, including the Berry Amendment, the Buy American Act, and MIL-STD-129 marking requirements. Additionally, the contractor is required to complete a CMMC Level 2 self-assessment to ensure cybersecurity compliance. The response deadline for this opportunity is November 16, 2026.

All Other Miscellaneous Manufacturing

POSTED

about 9 hours ago

DEADLINE

Ball Valve Parts Kit Manufacturing and SupplyThis subcontract involves the manufacture and supply of specialized ball valve parts kits for NSN 4820016773949 to support prime contractors delivering for the DLA Weapons Support Fluid Handling Division. The selected provider is responsible for sourcing or producing components that strictly adhere to the DLA Master List of Technical and Quality Requirements, with final delivery to Tracy, California. Rigorous quality and security standards are mandatory, including quality control certifications per SAE AS9003 or ISO 9001 and cybersecurity compliance with NIST SP 800-171. Additionally, all items must be packaged with Hazard Warning Labels in accordance with DFARS 252.223-7001. Responses for this opportunity are due by November 16, 2026.

Industrial Valve Manufacturing

POSTED

about 9 hours ago

DEADLINE

Supply of Nonmetallic Hose Assemblies (NSN 4720-00-274-9356)This subcontract involves the supply of nine nonmetallic hose assemblies, identified by NSN 4720-00-274-9356, for the Department of Defense DLA Weapons Support Fluid Handling Division. The selected provider is responsible for manufacturing or sourcing these assemblies and ensuring they are delivered to the specified destination in New Cumberland. The contractor must maintain strict adherence to DLA Technical and Quality Requirements as well as DLAD standards. Furthermore, the agreement mandates full compliance with the Buy American Act and the Berry Amendment to ensure regulatory alignment with domestic sourcing requirements.

Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 9 hours ago

DEADLINE

Military-Grade Packaging and Marking ServicesThis subcontract for Military-Grade Packaging and Marking Services supports the Department of Defense through the DLA Weapons Support Fluid Handling Division. The contractor is responsible for providing specialized packaging for hardware using medium duty, waterproof, greaseproof, and opaque bags in accordance with MIL-DTL-117 to protect against ultraviolet ray deterioration. Additionally, the scope includes palletization and marking services that must adhere to MIL-STD-2073-1E, RP001, and MIL-STD-129 standards. The final deliverables consist of fully packaged and marked retainers prepared for shipment to the DLA Distribution Depot Oklahoma. Performance for this contract takes place at Tinker AFB, zip code 73145-8000. The solicitation was posted on November 5, 2026, with a response deadline of November 16, 2026, falling under NAICS code 561910.

Packaging and Labeling Services

POSTED

about 9 hours ago

DEADLINE

Manufacture and Supply of Packing Retainers (MS27595-112)This subcontract involves the manufacture and supply of 863 packing retainers, part number MS27595-112, for the DLA Weapons Support Fluid Handling Division. The contractor is responsible for fabricating the units in accordance with the DLA Master List of Technical and Quality Requirements and ensuring all products meet Buy American Act compliance. Quality assurance must be verified using MIL-STD-1916 or ASQ H1331 zero-based sampling plans. The completed order of 863 units is to be delivered FOB Origin to the DLA Distribution Depot Oklahoma, with the place of performance located at Tinker AFB. This procurement falls under NAICS code 332721 and is managed by the Department of Defense.

Precision Turned Product Manufacturing

POSTED

about 9 hours ago

DEADLINE

Nonmetallic Hose Raw Material SupplyThis subcontract involves the supply of raw nonmetallic tubing and polymer stock to prime contractors supporting the Department of Defense DLA Weapons Support Fluid Handling Division. The materials must strictly adhere to the technical specifications of NSN 4720015221198 and be delivered as certified raw material stock. The supplier is required to ensure that no mercury or mercury-containing compounds are intentionally added to the materials and must provide all necessary Material Safety Data Sheets and hazard warning labels. Performance for this contract is centered in New Cumberland, Pennsylvania, under NAICS code 326199.

All Other Plastics Product Manufacturing

POSTED

about 9 hours ago

DEADLINE

Nonmetallic Hose Assembly FabricationThis subcontract involves the fabrication of six nonmetallic hose assemblies for the Department of Defense under the DLA Weapons Support Fluid Handling Division. The manufacturer must adhere strictly to NSN 4720015221198 specifications, ensuring that no mercury is intentionally added to the products. Additionally, the use of additive manufacturing is prohibited unless specific authorization is granted. The contractor is responsible for the complete delivery of the assemblies, which must be marked according to MIL-STD-129 and packaged in compliance with MIL-STD-2073-1E. Performance for this contract is centered in New Cumberland, Pennsylvania, with a response deadline set for November 16, 2026.

Rubber Product Manufacturing for Mechanical Use

POSTED

about 9 hours ago

DEADLINE

Nonmetallic Hose Assembly SupplierThis subcontract involves the manufacture and supply of nine nonmetallic hose assemblies, specifically part number 7019023597, for prime contractors supporting the Department of Defense DLA Weapons Support Fluid Handling Division. The supplier is responsible for ensuring all units are packaged according to RP001 and marked in compliance with MIL-STD-129, while strictly adhering to the technical and quality standards outlined in RA001. The project is categorized under NAICS code 339999, with the place of performance located in New Cumberland. Interested parties should note the response deadline of November 16, 2026, following the posting date of November 5, 2026.

All Other Miscellaneous Manufacturing

POSTED

about 9 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Manufacturer of Critical Application Machine Screws (NSN 5305-01-390-8483)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

Supplier of Hose Clamps (NSN 4730-01-662-7240)

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 9 hours ago

DEADLINE

Manufacture of Eye Bolts (NSN 5306-01-375-2845)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

Supply of Machine Bolts (NSN 5306-00-842-8223)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

Close Tolerance Bolt Manufacturing and Supply

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

Manufacturing of Straight Headed Pins (NSN 5315-01-643-4915)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

Supply of Machine Screws (NSN 5305015806799)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

Manufacturer of Flat Washers (NSN 5310000446284)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

Manufacturing of Plain Extended Hexagon Nuts with Washers

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 9 hours ago

DEADLINE

Supplier of Plain Hexagon Nuts (NSN 5310017000046)

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS ENGINES

POSTED

about 9 hours ago

DEADLINE

Supply of Hexagon Head Cap Screws (NSN 5305013363882)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

Supply of Anti-Ice Duct Bolts (NSN 5306015098106)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS