Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, December 9 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Specialized Hydraulic and Pneumatic Component Supply

Open

Federal

Response Deadline11/16/2026, 03:00:00 PM CST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract, titled Specialized Hydraulic and Pneumatic Component Supply, involves the provision of high-pressure components for prime contractors operating on NASA Glenn Research Center projects. The scope of work includes the delivery of thermostatic valves with specific pipe tapers, pressure gauges, and nitrogen-duty fittings and seals designed to meet 300 PSIG and 80°F specifications. All supplied materials must maintain compatibility with established facility fitting standards as outlined in PSL schematics. Managed through the NASA Shared Services Center under NAICS code 332912, the agreement requires that all components be delivered with First Party Vendor Warranty Support. The solicitation was posted on November 12, 2026, with a response deadline of November 16, 2026.

General Info

Subcontract for high-pressure hydraulic and pneumatic components for NASA Glenn Research Center projects.

Agency

National Aeronautics And Space Administration → NASA Shared Services Center

NAICS

332912 - Fluid Power Valve and Hose Fitting Manufacturing

Place of Performance

MS

Set-Aside

NONE

Documents

This scope was carved out of 80NSSC27948431Q.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Replacement Hydraulic Accumulator Bank & Panel

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 12

subcontract

Response DeadlineNov 16

Submission deadline

Response Deadline

11/16/2026, 03:00:00 PM CSTin 4 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyNational Aeronautics And Space Administration → NASA Shared Services Center

ContactsNo contacts available

OfficeN/A

Organization / AgencyNational Aeronautics And Space Administration → NASA Shared Services Center

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies high-pressure hydraulic and pneumatic components for prime contractors on NASA Glenn Research Center projects. Provides thermostatic valves with specific pipe tapers, pressure gauges, and nitrogen-duty fittings and seals meeting 300 PSIG and 80°F specifications. Ensures compatibility with established facility fitting standards per PSL schematics. Delivers all specified components with First Party Vendor Warranty Support.

Similar Contracts

Same NAICS industry code

Supply of Fluid Pressure Regulating Valves (NSN 4820-01-551-0627)This subcontract involves the procurement or manufacture of two fluid pressure regulating valves, specifically Griswold Industries part number 204386, for prime contractors supporting the Department of Defense. The deliverables, identified by NSN 4820-01-551-0627, must be delivered FOB Origin to DLA Distribution San Joaquin in Tracy, California. The contractor is required to adhere to strict military standards, including MIL-STD-129 for marking, MIL-STD-2073-1E for packaging, and DLA requirement RP001 for palletization. Additionally, the provider must ensure full compliance with Buy American regulations and mercury prohibitions to meet the specifications of the DLA supply contract.

DLA DIST SAN JOAQUIN

POSTED

about 7 hours ago

DEADLINE

PARTS KIT, SOLENOID VAL

Solicitation # SPE7M2-27-U-0031

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 7 hours ago

DEADLINE

VALVE, REGULATING, FL

Solicitation # SPE7MC-27-T-2019

Solicitation SPE7MC-27-T-2019 is a small business set-aside procurement issued by the DLA Weapons Support Maritime Hardware/Electrical for the acquisition of two fluid pressure regulating valves, identified by NSN 4820-01-551-0627. The hardware must be provided as Griswold Industries P/N 204386 (Assy 204386-01B). Delivery is required within 99 days, with the final destination for inspection and acceptance located at DLA Distribution San Joaquin in Tracy, California. The contract mandates strict adherence to MIL-STD-129 for marking and MIL-STD-2073-1E for packaging, with palletization following DLA requirement RP001. A critical safety restriction prohibits the intentional addition of mercury or mercury-containing compounds unless specifically authorized by NAVSEA, requiring shock-proof containment for portable instruments. Administratively, the contractor must utilize the Wide Area WorkFlow (WAWF) system for all invoicing and payment requests. The procurement is subject to several federal regulations, including the Buy American and Balance of Payments Program, DFARS cybersecurity reporting requirements, and prohibitions on covered defense telecommunications equipment.

DLA DIST SAN JOAQUIN

POSTED

about 7 hours ago

DEADLINE

VALVE, REGULATING, FLUID

Solicitation # SPE7M2-27-U-0018

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 7 hours ago

DEADLINE

STEM, FLUID VALVE

Solicitation # SPE7MC-27-T-2022

Solicitation SPE7MC-27-T-2022 is a fixed-price contract issued by the DLA Weapons Support Maritime Hardware/Electrical for the procurement of six nickel alloy fluid valve stems for a 5-inch end item, specifically identified as Metrex Valve Corp. part number 27M-197 and NSN 4810-01-365-4612. This is a critical application item with a required delivery date of September 19, 2025, and a need ship date of November 18, 2025. Delivery is set for 74 days after order, with the destination being DLA Dist San Joaquin in Tracy, California. Inspection and acceptance will occur at the destination. The contract mandates strict adherence to technical and quality requirements via the DLA Master List, with packaging following ASTM D3951 and palletization per RP001. All shipments must be marked and labeled according to MIL-STD-129. Special safety restrictions prohibit the intentional addition of mercury or mercury-containing compounds, except for specific functional uses. Administratively, the contract requires the use of the Wide Area WorkFlow system for invoicing and incorporates various FAR and DFARS clauses regarding cybersecurity, the Buy American Act, and the Berry Amendment. Quotes must be submitted via DIBBS and must comply with restrictions against unauthorized additive manufacturing.

DLA DIST SAN JOAQUIN

POSTED

about 7 hours ago

DEADLINE

VALVE, LINEAR, DIRECTION

Solicitation # SPE7M2-27-U-0075

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 7 hours ago

DEADLINE

VALVE, BLEEDER, HYDRAULI

Solicitation # SPE7M2-27-U-0068

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 7 hours ago

DEADLINE

VALVE, LINEAR, DIRECTION

Solicitation # SPE7M2-27-U-0062

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 7 hours ago

DEADLINE

VALVE, LINEAR, DIRECTION

Solicitation # SPE7M2-27-U-0113

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 7 hours ago

DEADLINE

VALVE ASSEMBLY, FUEL

Solicitation # SPE7LX-27-U-0785

DLA WEAPONS SUPPORT STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 7 hours ago

DEADLINE

VALVE, LINEAR, DIRECTION

Solicitation # SPE7M2-27-U-0101

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 7 hours ago

DEADLINE

VALVE, REGULATING, FLUID

Solicitation # SPE7M2-27-U-0057

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 7 hours ago

DEADLINE

More opportunities from National Aeronautics And Space Administration → NASA Shared Services Center

Same awarding agency

Custom Hydraulic GN2 Accumulator Bank and Panel FabricationThis subcontract involves the fabrication and assembly of a replacement hydraulic GN2 accumulator bank and integrated panel for prime contractors supporting NASA Glenn Research Center projects. The scope of work includes building a vibration-resistant strut frame, installing pipe tapers on thermostatic valves, and ensuring full system integration according to PSL Accumulator Panel Schematics. The completed system must be capable of supporting Nitrogen duty at 300 PSIG at 80 degrees Fahrenheit. The final deliverables consist of the completed accumulator bank and panel, a comprehensive parts list, and the associated technical drawings. All work is provided under a General Workmanship Warranty. This project is managed through the NASA Shared Services Center under NAICS code 333999.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 12 hours ago

DEADLINE

TAY 611-8 Technical Manuals & Service Bulletin SubscriptionThis subcontract through the NASA Shared Services Center provides a 12-month continuous electronic subscription to the Rolls Royce Care Web portal. The service is designed for prime contractors on NASA aviation projects to ensure access to critical TAY 611-8 Line Maintenance and Service Bulletins for Gulfstream IV aircraft. Because the contract requires the use of specific OEM technical publications, the services must be provided directly by the Original Equipment Manufacturer. The deliverables include the provision of active subscription access and the necessary electronic portal credentials. Performance for this contract is associated with Edwards, California, under NAICS code 488111. The solicitation was posted on November 12, 2026, with a response deadline of November 16, 2026.

Air Traffic Control

POSTED

about 12 hours ago

DEADLINE

Titanium Material Testing and Certification ServicesThis subcontract for Titanium Material Testing and Certification Services supports prime contractors on NASA Shared Services Center procurement projects. The selected provider will perform independent laboratory testing to verify the mechanical properties, material composition, and heat or lot traceability for CP Titanium and Ti-6Al-4V raw materials. All work must be performed by a facility holding ISO/IEC 17025 accreditation, with deliverables consisting of validation reports and Certified Material Test Reports produced in accordance with EN 10204 standards. The project is categorized under NAICS code 541380 and will be performed in Huntsville, Alabama. Interested parties should note the tight response window, with the solicitation posted on November 12, 2026, and a response deadline of November 18, 2026.

Testing Laboratories and Services

POSTED

about 12 hours ago

DEADLINE

CP Titanium Seamless Tube SupplierThis subcontract involves the supply and precision cutting of domestic commercially pure titanium seamless tubing for prime contractors supporting NASA Shared Services Center projects. All materials must adhere to AMS 4942 standards, and the use of torch or plasma cutting is strictly prohibited. The place of performance for this contract is located in Huntsville. Qualified suppliers must maintain ISO 9001 or AS9100 certification and ensure full compliance with ITAR and EAR regulations. Deliverables include cut-to-size seamless tubes accompanied by Certificates of Conformance and CMTR per EN 10204 3.1.

Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

about 12 hours ago

DEADLINE

Ti-6Al-4V Alloy Bar Supplier (Round and Square)This subcontract involves the supply and precision cutting of domestic Ti-6Al-4V titanium alloy bar stock in round and square profiles for prime contractors supporting NASA Shared Services Center projects. All materials must be cut according to MIL-T-9047, Class 5 standards, with a strict prohibition on the use of torch or plasma cutting. Performance of the contract takes place in Huntsville, Alabama. Qualified suppliers must hold ISO 9001 or AS9100 certification and maintain full compliance with ITAR and EAR regulations. Deliverables must include Certificates of Conformance and Certified Material Test Reports in accordance with EN 10204 3.1. The solicitation was posted on November 12, 2026, with a response deadline of November 18, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 12 hours ago

DEADLINE

Precision Aluminum Cutting and FinishingThis subcontract, titled Precision Aluminum Cutting and Finishing, involves the precision cutting and processing of Alloy 6061 aluminum plates for prime contractors supporting NASA Marshall Space Flight Center projects. The selected provider must cut plates to exact dimensions while ensuring full material traceability and maintaining strict material integrity. All work must be performed in accordance with ISO 9001 or AS9100 quality standards to ensure the processed plates are ready for final delivery to NASA. Managed by the NASA Shared Services Center, the performance of this contract is located in Huntsville, Alabama. The opportunity was posted on November 12, 2026, with a response deadline of November 18, 2026. The project falls under NAICS code 332710, focusing on specialized machine shop services for aerospace applications.

POSTED

about 12 hours ago

DEADLINE

Aerospace Grade Aluminum Plate Supply (Alloy 6061)This subcontract involves the supply of 12 units of Alloy 6061 aluminum plate with a thickness of 0.38 inches for prime contractors supporting NASA Marshall Space Flight Center projects in Huntsville. The materials must conform to Specification QQ-A-250/11 and include full heat or lot traceability from the producing mill. Each delivery must be accompanied by Certified Material Test Reports and Certificates of Conformance to ensure quality and specification adherence. To be eligible, the supplier must hold ISO 9001 or AS9100 certification and maintain strict compliance with ITAR export control laws. The procurement is managed through the NASA Shared Services Center under NAICS code 332813, with a response deadline set for November 18, 2026.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

about 12 hours ago

DEADLINE

Flexim / Emerson G731 Transmitter SupplyThis small business set-aside subcontract through the NASA Shared Services Center involves the procurement of one brand-name Flexim / Emerson G731 transmitter. The equipment is intended for prime contractors working on NASA projects to facilitate repairs to the CX-41 ULA GN2 meter station, with delivery terms established as FOB Destination. Eligible bidders must provide proof of manufacturer pricing and official authorization to resell the specified brand-name equipment. Additionally, contractors are required to maintain a valid CAGE/UEI code and active SAM registration to be considered for the award.

Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

about 12 hours ago

DEADLINE

Dual-Certified Stainless Steel Material SupplyThis subcontract through the NASA Shared Services Center involves the procurement and delivery of dual-certified SS304/SS304L stainless steel to support prime contractors working on projects at the NASA Glenn Research Center. The scope of work includes the sourcing and delivery of stainless steel in various forms, specifically stock, sheets, and tubing. To ensure compliance and quality standards, the supplier is required to provide formal material certifications and mill test reports that verify the grade and certification of all delivered steel. This requirement ensures that all materials meet the rigorous technical specifications necessary for NASA research and development operations.

Metal Service Centers and Other Metal Merchant Wholesalers

POSTED

about 12 hours ago

DEADLINE

Experimental Stainless Steel Transition FabricationThis subcontract involves the fabrication of experimental stainless steel transition components for prime contractors supporting NASA Glenn Research Center projects. The scope of work requires the manufacture of eight transition cones, consisting of four Rej and four Rej2 units, utilizing SS304/SS304L dual-certified stainless steel in accordance with government-provided drawings. To ensure operational safety and performance, all components must be capable of withstanding an internal pressure of 1 MPa and temperatures reaching 1000 Kelvin. The contractor is required to provide full material certifications upon the delivery of the completed components. This project is managed under the NASA Shared Services Center with a NAICS code of 332312.

Fabricated Structural Metal Manufacturing

POSTED

about 12 hours ago

DEADLINE

Precision Cutting/Machining ServicesThis subcontract for Precision Cutting and Machining Services involves the precision cutting of round bars and tubes for prime contractors supporting NASA materials contracts. The scope of work focuses on processing 17-4 PH and 304 CRES materials into exact lengths of 0.50, 7.25, and 1.75 inches, with a strict emphasis on maintaining material integrity and dimensional accuracy for the final steel components. Managed by the NASA Shared Services Center, the project is categorized under NAICS code 332710 and will be performed in Huntsville, Alabama. The solicitation was posted on November 12, 2026, with a response deadline set for November 18, 2026.

POSTED

about 12 hours ago

DEADLINE

Specialized Heat Treatment ServicesThe NASA Shared Services Center is seeking a subcontractor for Specialized Heat Treatment Services to support prime contractors on NASA materials contracts. The selected provider will be responsible for executing heat treatment processes to achieve specific hardness and condition requirements, with all conformance verified using NIST-traceable calibrated hardness testers. A critical requirement for this engagement is that the provider must hold Nadcap accreditation or an equivalent qualification. The scope of work includes the delivery of detailed heat treatment certifications and hardness results for every processed lot. This subcontract is categorized under NAICS code 332811 and will be performed in Huntsville, Alabama. Interested parties should note the response deadline of November 18, 2026.

Metal Heat Treating

POSTED

about 12 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

PIPE FITTINGS - FITTING ASSY

Solicitation # SPMYM127Q0003

DLA Maritime - Norfolk

POSTED

about 12 hours ago

DEADLINE

48--STEM,FLUID VALVE

Solicitation # SPE7MC-26-T-300G

DLA DIST SAN JOAQUIN

POSTED

about 12 hours ago

DEADLINE

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Manufacturing and Supply of Gate Valve Housings

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Stainless Steel Fluid Pressure Regulating Valve Fabrication

Defense Logistics Agency

POSTED

DEADLINE

Supply of Electrical Fuel Pump (NSN 2910-01-577-6952)

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

HOSE ASSEMBLY, NONMETAL

Solicitation # SPE7M0-27-T-1200

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

STEM, FLUID VALVE

Solicitation # SPE7M1-27-T-2575

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

VALVE, REGULATING, FLUID

Solicitation # SPE7MC-27-T-1967

Defense Logistics Agency

POSTED

DEADLINE

VALVE, REGULATING, FLUID

Solicitation # SPE7MC-27-T-2006

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

STEM, FLUID VALVE

Solicitation # SPE7M1-27-T-2565

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

VALVE, REGULATING, FL

Solicitation # SPE7MC-27-T-1971

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Get full access

Join 750+ contractors already using CLEATUS