Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Specialized Lighting Fixture Production (NSN 6210-01-478-5205)

Active

Federal

Response Deadline10/26/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract, issued by Construction & Equipment MRO SVC I for the Department of Defense, requires the manufacture and supply of 18 specialized lighting fixtures, specifically Part M16377/75-333.1EM under NSN 6210-01-478-5205. Production must strictly adhere to MIL-DTL-16377/75A and TDP Rev A Gen 1 specifications, with a total prohibition on the use of additive manufacturing. All items must be packaged according to MIL-STD-2073-1E and DLA RA001 requirements for delivery to DLA Distribution in New Cumberland, Pennsylvania. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 335132. Interested parties must respond by October 26, 2026. The contract focuses on precision delivery for prime contractors supporting DLA supply chains, ensuring all technical and packaging standards are met for military application.

General Info

Supply 18 specialized lighting fixtures for DoD by October 26, 2026.

Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I

NAICS

335132 - Commercial, Industrial, and Institutional Electric Lighting Fixture Manufacturing

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

SBA

Documents

This scope was carved out of SPE8E9-27-T-0169.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

FIXTURE, LIGHTING

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 14

subcontract

Response DeadlineOct 26

Submission deadline

Response Deadline

10/26/2026, 05:00:00 PM UTCin 12 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufactures and supplies specialized lighting fixtures for prime contractors delivering DLA supply contracts. Produces fixtures per MIL-DTL-16377/75A and TDP Rev A Gen 1, specifically Part M16377/75-333.1EM. Packages items per MIL-STD-2073-1E and DLA RA001 requirements. Additive Manufacturing is prohibited. Delivers 18 completed lighting fixtures to DLA Distribution New Cumberland, PA.

Similar Contracts

Same NAICS industry code

Supply of Light Indicators (NSN 6210-01-737-8360)This small business set-aside subcontract involves the manufacture or procurement of ten specialized light indicators, specifically Applied Avionics part number LR3-EM-27-BB-E1YEL, for prime contractors supporting DLA Troop Support. The components must adhere to TDP Rev A Gen 1 and DLA Master List quality standards, with final delivery of NSN 6210-01-737-8360 to the DDSP New Cumberland facility. Compliance requirements include strict adherence to MIL-STD-2073-1E and MIL-STD-129 packaging standards, as well as the provision of Source Approval Request documentation and SDS compliance. The opportunity is categorized under NAICS code 335132 and is managed by the Department of Defense.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 8 hours ago

DEADLINE

FIXTURE, LIGHTING

Solicitation # SPE8E9-27-T-0169

Solicitation SPE8E9-27-T-0169 is a total small business set-aside for the procurement of 18 lighting fixtures, identified by NSN 6210014785205. The contract is issued by DLA Troop Support under the First Destination Transportation program with delivery terms set as FOB Origin. The primary delivery location is the DLA Distribution DDSP New Cumberland Facility in Pennsylvania, with a delivery window of 638 days. The procurement includes a mandatory First Article Test requirement for five units, with the test report due within 120 calendar days of the contract date. Technical compliance is governed by MIL-DTL-16377/75A and MIL-DTL-16377K, with packaging and marking adhering to MIL-STD-2073-1E and MIL-STD-129. Quality assurance involves inspection and acceptance at the origin using sampling methods per MIL-STD-1916 or ASQ H1331. The contract mandates strict adherence to domestic sourcing requirements, including the Buy American Act and the Berry Amendment, and prohibits the use of additive manufacturing without authorization. Payment and invoicing must be processed electronically through the Wide Area Workflow system.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 8 hours ago

DEADLINE

INDICATOR, LIGHT

Solicitation # SPE8E7-27-T-0188

Solicitation SPE8E7-27-T-0188 is a fixed-price, total small business set-aside contract issued by the Department of Defense through DLA Troop Support for the procurement of 10 light indicators, identified by NSN 6210-01-737-8360 and part number LR3-EM-27-BB-E1YEL. The items are to be delivered FOB Origin to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania, with a need ship date of April 12, 2027, and an original required delivery date of July 23, 2027. Inspection and acceptance will occur at the destination. The contract mandates strict adherence to technical and quality requirements found in the DLA Master List, as well as specific packaging and marking standards including MIL-STD-2073-1E, MIL-STD-129, and RP001. Compliance with the Buy American Act, the Berry Amendment, and hazardous material labeling under 29 CFR 1910.1200 is required. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and adherence to cybersecurity standards under DFARS 252.204-7012. The solicitation is categorized under NAICS code 335132.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 8 hours ago

DEADLINE

General Illumination Light Set SupplierThis subcontract involves the procurement or manufacture of general illumination light sets to support prime contractors on Department of Defense Construction and Equipment MRO projects. The supplier is responsible for providing 7,000 completed light set kits that strictly adhere to NSN 6230-01-483-7562 and Jameson LLC part number 31-5004M. The scope of work includes specific compliance with physical item marking per RQ017 and packaging standards according to ASTM D3951 and MIL-STD-129. All completed units are to be delivered to Fort Bragg, North Carolina. The project falls under NAICS code 335132 and is managed through the DLA Troop Support Construction and Equipment MRO service.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

LIGHT SET, GENERAL ILLU

Solicitation # SPE8E9-27-Q-0046

Solicitation SPE8E9-27-Q-0046 is a firm fixed price contract issued by the DLA Troop Support Construction and Equipment MRO SVC I for the procurement of seven general illumination light sets, identified as commercial items under NSN 6230-01-483-7562. The items are to be delivered as kits with a delivery window of 60 days after order. Delivery is FOB Destination, with the shipping and marking destination specified as the USALRCTR at Fort Bragg, North Carolina. The contract mandates strict adherence to DLA Master List technical and quality requirements, specifically RP001 for packaging, RQ011 for the removal of government identification from non-accepted supplies, and RQ017 for physical item marking. Non-hazardous materials must be packaged per ASTM D3951, while hazardous materials require packaging according to TQ requirement IP025. All packaging must be labeled in accordance with MIL-STD-129. Invoicing and payment requests must be processed electronically through the Wide Area WorkFlow system. The procurement is subject to various FAR and DFARS clauses, including the Buy American and Balance of Payments Program and specific cybersecurity requirements for Controlled Unclassified Information.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Solicitation # SPE4A6-26-T-32YU

Solicitation SPE4A6-26-T-32YU is a Request for Quotations issued by the DLA Aviation ASC Commodities Division for the procurement of 34,000 illuminating magnifier desk lights. This is a commercial off the shelf item procurement under NAICS code 335132. The delivery is required within 181 days, with a need ship date of March 26, 2027, to DLA Distribution Cherry Point in North Carolina. The shipment is designated as FOB Origin under the First Destination Transportation program. The contract requires strict adherence to packaging and marking standards, specifically MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Inspection and acceptance will occur at the destination, utilizing zero based sampling plans such as MIL-STD-1916. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system. Offerors must comply with various federal regulations, including the Buy American Act, the Berry Amendment, and DFARS requirements for safeguarding covered defense information and reporting cyber incidents. Quotations were due by September 25, 2026, via the DIBBS system.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Solicitation # SPE4A6-26-T-04JJ

The contract solicitation is for 15 desk lights with the NSN/part number 6230-00-873-1710, issued by the Defense Logistics Agency under the Department of Defense. The solicitation, identified by number SPE4A6-26-T-04JJ, was posted on July 7, 2026, with a response deadline of July 15, 2026. This is a federal procurement requiring vendors to submit offers by the specified deadline to fulfill the purchase request numbered 7017383762. The item is intended for use by a federal entity, with no specific place of performance or set-aside classification detailed in the posting. Additional details and submission instructions are accessible through the official DIBBS portal linked in the contract data.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

62--INDICATOR,LIGHT

Solicitation # SPE8E7-27-T-0126

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Solicitation # Z5360

Nashville Electric Service is soliciting bids for the procurement of 392 LED roadway luminaires. The required fixtures must provide a minimum of 5,400 delivered lumens at a 3000K correlated color temperature with a maximum input wattage of 40W and 120-277V multi-volt operation. Technical specifications include Roadway Type II optics, a gray painted finish, 20kV/10kA surge protection, a wiring terminal block, and a 7-pin photocontrol receptacle with a dimmable driver. Each unit must carry a 10-year warranty and feature specific labeling, including an NES QR label and a 3x3 inch white sticker with centered 1.75 inch tall black lettering reading 5L. This solicitation is restricted to approved manufacturers and part numbers from Current, Cooper, and Amer Ele, and alternate brands will not be accepted. Bids must be submitted through the Bid Center by 2:00 pm local time on October 19, 2026. Vendors are required to state their earliest delivery time in calendar days, as delivery speed may be a determining factor in the award decision. For any discrepancies between part numbers and descriptions, vendors must contact the procurement contact, Shanna Faulk, prior to the closing date.

Nashville Electric Service

POSTED

DEADLINE

Solicitation # Z5372

Nashville Electric Service is soliciting bids for the procurement of 392 LED roadway luminaires under solicitation number Z5372. The required fixtures must provide a minimum of 19,800 delivered lumens at 3000K correlated color temperature, with a maximum input wattage of 150W and 120-277V multi-volt operation. Technical specifications include Roadway Type III optics, gray paint, 20kV/10kA surge protection, a wiring terminal block, and a 7 pin photocontrol receptacle with a dimmable driver. Each unit must include a 10 year warranty and specific labeling, consisting of an NES QR label and a 3 by 3 inch white sticker with centered 1.75 inch tall black lettering reading 20L. Only specific part numbers from CURRENT, COOPER L, and AMER ELE are acceptable, and alternate brands will not be considered. Bids must be submitted through the Bid Center by 2:00 pm local time on October 19, 2026. Offerors are required to state their earliest delivery time in calendar days, as delivery speed may be a factor in the award decision. The primary procurement contact for this action is Shanna Faulk.

Nashville Electric Service

POSTED

DEADLINE

Specialized Electrical Component SupplyThe Specialized Electrical Component Supply subcontract, issued by the Department of Defense DLA Weapons Support ASC Commodities Division, involves the provision of raw materials, wires, connectors, and terminals for prime contractors. All supplied components must strictly adhere to Technical Data Package specifications and Drawing 12992362, with final delivery of certified electrical components to the assembly facility located in Anniston. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 335132. A critical requirement of the contract is full compliance with domestic sourcing mandates, specifically the Buy American Act and the Berry Amendment. Interested parties must respond by October 20, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

PANEL, LIGHT INDICAT

Solicitation # SPE4A6-27-T-1909

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I

Same awarding agency

Supply of Specialized Metal Sheets (NSN 9515009505323)This subcontract involves the supply of four precision-manufactured metal sheets for prime contractors supporting Department of Defense DLA supply contracts. The materials must be manufactured or sourced in strict accordance with the Technical Data Package and NSN 9515009505323. Compliance with MIL-STD-2073-1E and DLA Packaging Requirements for Procurement RP001 is mandatory for all packaging, and the provider must submit Metal Certification as specified in CDRL-METALSCERT. The contract is managed by Construction & Equipment MRO SVC I under NAICS code 332322, with the place of performance located in New Cumberland, Pennsylvania. Interested parties must respond by October 26, 2026, to provide the required metal sheets and accompanying certification documentation.

Sheet Metal Work Manufacturing

POSTED

about 8 hours ago

DEADLINE

Supply of Fusible Fire LinksThis subcontract with the Department of Defense for Construction and Equipment MRO SVC I involves the procurement of 296 specialized fusible fire links. The contractor is responsible for manufacturing or sourcing components under NSN 4210004433526, which must feature a length of 2.250 inches, a temperature rating of 360 degrees Fahrenheit, and a load capacity ranging from 3 to 20 pounds. Strict compliance is required regarding material safety and logistics, specifically ensuring all units are mercury-free and packaged according to MIL-STD-2073-1E standards. The performance of this contract is centered in New Cumberland, Pennsylvania, with a response deadline set for October 26, 2026.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 8 hours ago

DEADLINE

Supply of QPL-Approved Acrylic Plastic SheetsThis subcontract, issued by Construction & Equipment MRO SVC I for the Department of Defense, involves the supply of 15 clear acrylic plastic sheets to prime contractors fulfilling DLA supply contracts. The materials must be produced by a QPL-approved manufacturer and conform to MIL-PRF-5425E standards, ensuring the sheets possess necessary heat and weathering resistance and include protective covering on both sides. All deliverables must be packaged and marked in accordance with MIL-STD-2073-1E and MIL-STD-129. The performance location for this contract is New Cumberland, Pennsylvania. Interested parties must respond by October 26, 2026, under NAICS code 326113.

Unlaminated Plastics Film and Sheet (except Packaging) Manufacturing

POSTED

about 8 hours ago

DEADLINE

Supply of Soldering Flux (NSN 3439-01-459-2000)This subcontract involves the procurement of 79 bottles of soldering flux, identified by NSN 3439-01-459-2000, to support prime contractors delivering on Department of Defense supply contracts. The selected provider is responsible for manufacturing or sourcing the material in strict accordance with the DLA Master List of Technical and Quality Requirements. All materials must be packaged using preservation method 10, adhering to MIL-STD-2073-1E and DLA RP001 standards. Delivery is specified as FOB Origin, with the place of performance located in Tracy, California. The opportunity is managed by Construction and Equipment MRO SVC I under NAICS code 325998.

All Other Miscellaneous Chemical Product and Preparation Manufacturing

POSTED

about 8 hours ago

DEADLINE

Specialized Glass Tubing SupplyThis subcontract involves the manufacture or sourcing of seven units of specialized glass tubing for prime contractors supporting Department of Defense supply contracts. The materials must strictly adhere to NSN 9340012474102 and Part Number 22257-1 specifications. Delivery is set as FOB Origin with the place of performance located at Hill AFB. The contractor is required to follow rigorous packaging and palletization standards, including ASTM D3951, MIL-STD-129, MIL-STD-130N, and RP001. Additionally, the agreement mandates full compliance with the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 regulations.

Glass Container Manufacturing

POSTED

about 8 hours ago

DEADLINE

Supply of Fire Protective GearThis subcontract involves the supply of specialized fire protective gear, specifically Lion Apparel Inc. part number NAVY2K-L-27 in size large-short, to support prime contractors delivering on Department of Defense supply contracts. The agreement requires three warranted units to be delivered to DLA Distribution in New Cumberland, Pennsylvania. All gear must adhere to strict military standards, including marking per MIL-STD-130N and packaging according to MIL-STD-2073-1E and MIL-STD-129. Additionally, commercial labels must clearly display the contractor name, contract number, size, National Stock Number, fiber content, and specific laundering instructions.

Men’s and Boys’ Cut and Sew Apparel Manufacturing

POSTED

about 8 hours ago

DEADLINE

Military-Grade Packaging and Preservation ServicesThis subcontract for Military-Grade Packaging and Preservation Services involves providing specialized packaging for prime contractors fulfilling Department of Defense supply contracts. The scope of work requires the execution of packaging according to MIL-STD-2073-1E, specifically utilizing Preservation Method 10 and ZZ wrap materials. Additionally, the contractor must ensure all air purification hardware complies with QUP:001 standards, with a total delivery requirement of 51 packed and labeled units. The project is managed under NAICS code 488510 for the agency Construction & Equipment MRO SVC I. Performance will take place in New Cumberland, Pennsylvania. Interested parties should note the response deadline of October 26, 2026.

Freight Transportation Arrangement

POSTED

about 8 hours ago

DEADLINE

Manufacture and Supply of Air Purification Filter UnitsThis subcontract involves the manufacture and supply of 51 completed air purification filter unit assemblies for prime contractors supporting Department of Defense DLA supply contracts for submarine sanitary tank vents. The scope of work includes the production of cylindrical crest towers and base plates, which must be manufactured in strict accordance with MIL-F-15919D specifications. To ensure quality and safety, the contractor must guarantee that no mercury contact occurs during production and adhere to sampling plans defined by MIL-STD-1916 or ASO H1331. The project is managed under NAICS code 333318, with performance taking place in New Cumberland, Pennsylvania.

Other Commercial and Service Industry Machinery Manufacturing

POSTED

about 8 hours ago

DEADLINE

Supply of MIL-P-23536A Transparent Plastic SheetsThis subcontract involves the supply of transparent, solid plastic sheets measuring 96 by 48 by 1 inch for prime contractors supporting Department of Defense DLA supply contracts. All materials must comply with MIL-P-23536A Type V standards and be clearly marked as either Virgin or Borated in six distributed locations. The provider is responsible for manufacturing or sourcing the sheets, facilitating government source inspections for critical items, and providing Safety Data Sheets in accordance with 29 CFR 1910.1200(g). The contract requires the delivery of three warranted plastic sheets, which must be packaged according to RP001 and MIL-STD-129 specifications. Performance for this requirement is centered in Norfolk, Virginia, under NAICS code 326199. Interested parties must adhere to the response deadline of October 26, 2026.

All Other Plastics Product Manufacturing

POSTED

about 8 hours ago

DEADLINE

Supply of Applicator Bottles (NSN 8125-01-562-3875)This subcontract involves the manufacture or sourcing of 1,044 applicator bottles to support prime contractors delivering on Department of Defense supply contracts. The provided units must strictly adhere to NSN 8125-01-562-3875 and P/N FD-2-ESD specifications, while ensuring full compliance with NAVSEA 5100-003D mercury-free requirements and MIL-STD-2073-1 packaging standards. Managed by Construction and Equipment MRO SVC I for the Department of Defense, the contract specifies that delivery will be handled via Government-Arranged Transportation. The place of performance is located in New Cumberland, Pennsylvania, with a response deadline set for October 26, 2026.

All Other Miscellaneous Manufacturing

POSTED

about 8 hours ago

DEADLINE

Alclad Aluminum Sheet Metal SupplierThis subcontract involves the supply of 41 Alclad aluminum metal sheets to prime contractors supporting Department of Defense supply contracts through Construction and Equipment MRO SVC I. The required materials must feature a 0.0013 inch cladding on both sides, an overall thickness of 0.032 inches, and dimensions of 48 inches wide by 144 inches long. The supplier is responsible for ensuring all materials comply with RA001 technical and quality requirements and are packaged according to MIL-STD-2073-1E. Performance for this contract is centered at Robins Air Force Base, and the solicitation is categorized under NAICS code 332431.

Metal Can Manufacturing

POSTED

about 8 hours ago

DEADLINE

MIL-SPEC Packaging and Logistics ServicesThis subcontract for MIL-SPEC Packaging and Logistics Services involves providing military-grade packaging and shipping support for prime contractors working on DLA Troop Support projects. The selected provider must ensure all packaging adheres to MIL-STD-2073-1E and marking follows MIL-STD-129, while managing the transport of hazardous materials according to IP025 standards. The primary objective is to deliver fully compliant, palletized shipments ready for inspection to DLA Distribution New Cumberland. Managed under NAICS code 488510 for the Department of Defense, the contract requires performance in New Cumberland, Pennsylvania. Interested parties must respond by October 26, 2026, to provide these specialized logistics services for Construction and Equipment MRO SVC I.

Freight Transportation Arrangement

POSTED

about 8 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS