Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 30 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Specialized Mechanical Tooling (Lip Seal Tools & Wrenches)

Active

Federal

Response Deadline10/09/2026, 10:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the provision of specialized mechanical extraction and installation tools for prime contractors supporting the Naval Surface Warfare Center, Philadelphia Division. The scope of work specifically requires the supply of lip seal pullers, lip seal pushers, and wrenches, along with necessary technical brochures, equipment origin data, and warranty information. The contract is categorized under NAICS code 332510 and is managed by the Department of Defense. All specified mechanical tools are to be delivered to the agency with the place of performance located in Philadelphia, Pennsylvania. The response deadline for this opportunity is October 9, 2026.

General Info

Supply mechanical extraction and installation tools for Naval Surface Warfare Center in Philadelphia.

Agency

Department Of Defense → Nswc Philadelphia DivisionView Agency

NAICS

332510 - Hardware ManufacturingView NAICS

Place of Performance

Philadelphia, PA, 19112, USA

Set-Aside

NONE

Documents

This scope was carved out of N64498-27-SIMACQ-PD-42-0026.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

PD-42-0026; M250-KS4 Gas Turbine SSE

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedSep 24

subcontract

Response DeadlineOct 9

Submission deadline

Response Deadline

10/09/2026, 10:00:00 PM UTCin 15 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Nswc Philadelphia Division

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Nswc Philadelphia Division

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies specialized mechanical extraction and installation tools for prime contractors on Naval Surface Warfare Center, Philadelphia Division projects. Provides lip seal pullers, lip seal pushers, and wrenches. Supplies technical brochures, equipment origin data, and warranty information. Delivers the specified mechanical tools to the agency.

Similar Contracts

Same NAICS industry code

LATCH, DOOR, VEHICULAR

Solicitation # SPE7L4-26-T-7178

This contract is for the procurement of 180 vehicular door latches under solicitation SPE7L4-26-T-7178 for the Department of Defense. The item is classified as a critical application commercial item and is a restricted source product requiring engineering source approval by the government design control activity. Suppliers must provide components that conform to specific source control drawings and technical data packages, including reference drawing 19207 12378607 Revision D and 19207 12417478 Revision C. The agreement specifies a delivery timeframe of 241 days with a required delivery date of June 8, 2027. Shipping is set as FOB Origin with inspection and acceptance occurring at the destination, specifically the DLA Distribution New Cumberland facility in Pennsylvania. Compliance with DLA packaging requirements, MIL-STD-2073-1E for delivery preparation, and MIL-STD-129 for marking is mandatory.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 1 hour ago

DEADLINE

Solicitation # SPE4A5-26-T-474F

This contract is a solicitation for the procurement of 43 units of ring spacers, identified by NSN 5365-00-721-8559 and Hamilton Sundstrand Corporation part number 515400-31. The items are classified as commercial critical application items and must be delivered to DLA Distribution Warner Robins by July 4, 2027. The delivery terms are FOB Origin, with inspection and acceptance occurring at the destination. The supplier must adhere to strict quality and technical standards, including ISO 9001:2015 for manufacturers and CMMC Level 2 self-assessment for cybersecurity. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements. Sampling and inspection will follow MIL-STD-1916 or ASQ H1331, with a zero-tolerance policy for non-conformances in sample lots unless otherwise specified.

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 1 hour ago

DEADLINE

BRACKET, MOUNTING

Solicitation # SPE7L1-26-T-17D8

This solicitation, issued by the Department of Defense Land Supply Chain, is for the procurement of 17 mounting brackets under National Stock Number 5340-01-668-3212. The contract requires delivery within 168 days after the order is placed and is associated with purchase request 7018498475. Performance for this contract is located in Tracy, California. The agreement is subject to specific technical and quality requirements as defined in the DLA Master List, including mandatory packaging standards and the removal of government identification from any non-accepted supplies. Interested parties must respond by October 5, 2026, as specified in solicitation SPE7L1-26-T-17D8.

LAND SUPPLY CHAIN

POSTED

about 1 hour ago

DEADLINE

PIN, STRAIGHT, HEADLESS

Solicitation # SPE4A6-26-T-36HJ

This solicitation, identified as SPE4A6-26-T-36HJ, is for the procurement of 916 headless straight pins under NSN 5315-01-187-9612. The contract is issued by the Department of Defense through the ASC Commodities Division with a delivery requirement of 165 days after order. Compliance with DLA packaging requirements, physical identification marking, and specific sampling methods such as MIL-STD-1916 or ASQ H1331 is mandatory to ensure quality assurance and acceptance at origin. The agreement includes strict adherence to export control regulations, specifically ITAR and EAR, meaning technical data cannot be shared with foreign nationals without prior authorization from the Department of State or Commerce. Access to this data is limited to contractors with approved US/Canada Joint Certification Program certification and completed DLA export training. Technical and quality requirements are governed by the DLA Master List, and the contract specifies the handling of covered defense information and the removal of government identification from non-accepted supplies.

ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

Solicitation # SPE7L1-26-T-17J5

This contract is a solicitation for the procurement of 47 butt hinge assemblies, identified by NSN 5340-00-332-2658. Per Boeing specifications, the assembly must include parts 5-89301-6, 5-89301-7, and 5-89301-8. The requirement is designated as a total small business set-aside under NAICS code 332510, with a delivery timeline of 118 days after the order. Key compliance requirements include CMMC Level 2 self-assessment, adherence to DLA packaging and quality standards, and a strict prohibition on the use of class I ozone depleting chemicals. Delivery is set as FOB Origin with inspection and acceptance occurring at the destination, specifically the DLA Distribution Depot at Tinker AFB, Oklahoma. The original required delivery date is October 15, 2026.

LAND SUPPLY CHAIN

POSTED

about 1 hour ago

DEADLINE

STOP, MECHANICAL

Solicitation # SPE7M4-26-T-443L

This solicitation from the Department of Defense Fluid Handling Division is for the procurement of 45 units of mechanical stops, identified by NSN 5340-01-631-3142. The contract requires delivery within 168 days after the order is placed, with performance located at Tinker AFB. The procurement falls under NAICS code 332510 and is managed by the Defense Logistics Agency. The contract mandates strict adherence to cybersecurity and export control regulations. Specifically, it requires CMMC Level 2 certification and compliance with ITAR and EAR regulations for the handling of technical data. Contractors must have an approved US/Canada Joint Certification Program certification and complete specific DLA training and questionnaires to access export-controlled information. Additionally, the provider must comply with DLA packaging requirements and ensure the removal of government identification from any non-accepted supplies.

FLUID HANDLING DIVISION

POSTED

about 1 hour ago

DEADLINE

LEAF, BUTT HINGE

Solicitation # SPE7L1-26-T-16H0

This contract is for the procurement of eight leaf butt hinges, identified by NSN 5340-00-192-4091 and part number 4F55648-104B. The order is managed by the Department of Defense Land Supply Chain under solicitation SPE7L1-26-T-16H0. Delivery is required within 168 days, with a need ship date of March 23, 2027, and a final required delivery date of May 7, 2027. The items are to be delivered FOB Origin and will be inspected and accepted at the destination, specifically the DLA Distribution New Cumberland facility in Pennsylvania. The contract mandates strict adherence to DLA packaging requirements and technical standards, including RP001 and MIL-STD-129. Quality assurance and sampling must comply with MIL-STD-1916 or ASQ H1331, with a zero-nonconformance requirement for acceptance. Packaging must follow ASTM D3951 for non-hazardous materials or TQ requirement IP025 for hazardous materials. The item is designated as a critical application item, and all identification marking must align with MIL-STD-130N.

LAND SUPPLY CHAIN

POSTED

about 1 hour ago

DEADLINE

STANDOFF, THREADED, SPAC

Solicitation # SPE7L1-26-T-16T0

This solicitation, issued by the Department of Defense Land Supply Chain under solicitation number SPE7L1-26-T-16T0, is for the procurement of 150 threaded spacing standoffs, identified by NSN 5340-01-417-8963. The contract requires delivery within 168 days after receipt of order, with the place of performance located in Bremerton, Washington. The agreement is subject to strict technical and quality requirements as defined by the DLA Master List, including specific packaging standards and the removal of government identification from non-accepted supplies. Notably, the contract involves covered defense information and is subject to export controls under ITAR and EAR regulations. Access to technical data is restricted to approved contractors with US/Canada Joint Certification Program certification and completed DOD export-control training.

LAND SUPPLY CHAIN

POSTED

about 1 hour ago

DEADLINE

Solicitation # SPE4A6-26-T-36MS

This solicitation, issued by the Department of Defense ASC Commodities Division under solicitation number SPE4A6-26-T-36MS, is for the procurement of 15 units of part number 91-A5334 (NSN 5315-01-265-9190) from Rix Industries. The contract requires delivery within 169 days after the order is placed and is categorized under NAICS code 332510. The agreement incorporates several technical and quality requirements from the DLA Master List, including specific documentation for source approval requests, packaging standards, and the removal of government identification from non-accepted supplies. Additionally, the contract mandates strict compliance with NAVSEA 5100-003D regarding the prohibition of intentionally added mercury or mercury-containing compounds, with limited exceptions for specific functional components like batteries and sensors.

ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

Solicitation # SPE7L1-26-T-17E1

This contract is for the procurement of eight caster wheels, identified by NSN 5340016995484 and associated with RBC Bearings Incorporated part numbers 8287340-1 and Y192L. The order is managed under solicitation SPE7L1-26-T-17E1 for the Department of Defense Land Supply Chain. Delivery is required within 168 days, with a need ship date of March 23, 2027, and a final required delivery date of May 21, 2027. The items must be delivered FOB Origin to the DLA Distribution San Joaquin facility in Tracy, California. Compliance with specific technical and quality requirements is mandatory, including DLA packaging standards, MIL-STD-129 marking, and the prohibition of Class I ozone-depleting chemicals. Inspection and acceptance will occur at the destination.

LAND SUPPLY CHAIN

POSTED

about 1 hour ago

DEADLINE

BRACKET, MOUNTING

Solicitation # SPE7L1-26-T-17C7

This contract is for the procurement of 18 mounting brackets under solicitation number SPE7L1-26-T-17C7 for the Department of Defense Land Supply Chain. The items are identified by NSN 5340-01-649-9401 and must be manufactured according to Technical Data Package Revision A, General 1, based on drawing 30554 04-20880 Revision F. The delivery is set for 168 days after the order, with an original required delivery date of January 11, 2027, and a final need ship date of March 23, 2027. The agreement specifies that shipping is FOB Origin, with inspection and acceptance occurring at the destination. Packaging must comply with DLA requirements, specifically RP001 and MIL-STD-129, with hazardous materials following IP025 or non-hazardous materials following ASTM D3951. All supplies must be delivered to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract also incorporates various technical and quality requirements, including the removal of government identification from non-accepted supplies and the protection of covered defense information.

LAND SUPPLY CHAIN

POSTED

about 1 hour ago

DEADLINE

DOG ASSEMBLY, SIDE DOG

Solicitation # SPE7M4-26-T-441P

This contract is for the procurement of 78 units of a non-handed side dog assembly for a hatch, identified by NSN 2040-01-450-6645. According to drawing 803-6397269, pieces 65 and 95 must be shipped loose, as the dog lever will be templated and welded during installation. The delivery timeline is set for 168 days after the order is placed. The solicitation is issued by the Department of Defense Fluid Handling Division under solicitation number SPE7M4-26-T-441P. Strict compliance is required regarding CMMC Level 2 certification, DLA packaging standards, and the handling of covered defense information. Furthermore, the technical data is subject to ITAR and EAR export controls, requiring contractors to have an approved US/Canada Joint Certification Program certification and completed export-control training to access the data.

FLUID HANDLING DIVISION

POSTED

about 1 hour ago

DEADLINE

More opportunities from Department Of Defense → Nswc Philadelphia Division

Same awarding agency

PD-42-0026; M250-KS4 Gas Turbine SSE

Solicitation # N64498-27-SIMACQ-PD-42-0026

The Naval Surface Warfare Center, Philadelphia Division is conducting market research via Request for Information N64498-27-SIMACQ-PD-42-0026 to identify commercial or non-commercial solutions for the procurement of seven sets of M250-KS4 gas turbine engine Special Support Equipment. This equipment, which includes maintenance stands, dummy bearings, protectors, and various specialized tools and fixtures, is intended to enhance maintenance capabilities at Regional Maintenance Center turbine shops, reduce repair turnaround times, and enable the refurbishment of unusable carcasses to increase available assets. The effort is categorized under NAICS code 333611 and is managed by the Department of Defense. This notice is issued solely for planning purposes in accordance with FAR Part 10 and does not constitute a formal solicitation, request for proposal, or commitment to contract. Interested respondents must submit unclassified electronic capability statements, including company identification, business size, socioeconomic status, and DUNS numbers, to Jenny Tomeo by 6:00 PM EST on October 9, 2026. Submissions are limited to ten pages and must be sent via email. The government will not provide compensation for information received, and all submissions become government property upon receipt.

Turbine and Turbine Generator Set Units Manufacturing

POSTED

about 6 hours ago

DEADLINE

Design Logistics and Procurement SupportThe Design Logistics and Procurement Support subcontract provides essential material sourcing and identification services for prime contractors working on Naval Surface Warfare Center Philadelphia Division facility projects. The selected provider will be responsible for preparing detailed material lists for design fabrication, identifying long-lead items, and supplying critical cost data and sourcing information. Key deliverables include the Preliminary Material List and the Long Lead Material List. This opportunity is a total small business set-aside under NAICS code 541614, requiring a contractor with proven expertise in government procurement and industrial material sourcing. The project is managed by the Department of Defense for the NSWC Philadelphia Division, with performance taking place in zip code 19112. Responses are due by October 23, 2026.

Process, Physical Distribution, and Logistics Consulting Services

POSTED

DEADLINE

Licensed Professional Engineer (PE) Review and StampingThis subcontract opportunity with the Naval Surface Warfare Center Philadelphia Division involves providing legal certification and professional stamps for prime contractors working on facility projects. The selected provider will be responsible for reviewing and certifying conceptual, preliminary, and detailed engineering designs, ultimately delivering stamped and certified engineering drawing packages for submission to government authorities. A valid Professional Engineer license in the relevant jurisdiction is required to perform these services. This is a total small business set-aside under NAICS code 541330, with a response deadline of October 23, 2026. The place of performance is located in zip code 19112.

Engineering Services

POSTED

DEADLINE

Whole-Site CAD Modeling and GraphicsThe Whole-Site CAD Modeling and Graphics subcontract supports the Naval Surface Warfare Center Philadelphia Division by maintaining and updating digital models for facility projects. The primary objective is to utilize advanced AutoCAD proficiency to integrate legacy facility designs with new machinery arrangement concepts within a comprehensive computer-based model. This work includes the development of real-time test site and facility layouts to ensure accurate graphics design support and updated whole-site modeling. This opportunity is designated as a total Small Business Set Aside under NAICS code 541330. The project is managed by the Department of Defense and is based in Philadelphia, Pennsylvania. Interested parties must respond by October 23, 2026.

Engineering Services

POSTED

DEADLINE

HVAC and Mechanical Utilities DesignThis subcontract opportunity with the Naval Surface Warfare Center Philadelphia Division focuses on the design of HVAC and mechanical utilities for facility projects. The scope of work involves creating designs for fluid transport systems, water chillers, chilled water systems, and piping arrangements for auxiliary equipment such as compressors, pumps, blowers, fans, and heat exchangers. Successful execution requires specialized expertise in high-pressure fluid systems and industrial HVAC, with a primary deliverable consisting of HVAC system diagrams and piping arrangements. The project is designated as a total Small Business Set Aside under NAICS code 541330. Performance will take place in the 19112 zip code area. Interested parties must respond by October 23, 2026, to meet the submission deadline for this Department of Defense agency requirement.

Engineering Services

POSTED

DEADLINE

Structural and Mechanical Design AnalysisThis small business set-aside subcontract with the Naval Surface Warfare Center Philadelphia Division focuses on structural and mechanical design analysis for facility projects. The scope of work involves performing Finite Element Analysis to evaluate floor loading and support system capacities, as well as designing concrete foundation pads, piles, and structural drawings for high-pressure and high-temperature systems reaching 6500PSI and 1200 degrees. Key deliverables include FEA reports and foundation drawing packages. The project falls under NAICS code 541330 and is performed in the 19112 zip code area. The response deadline for this opportunity is October 23, 2026.

Engineering Services

POSTED

DEADLINE

Electrical Systems Design and AnalysisThis small business set-aside subcontract with the Department of Defense involves providing electrical engineering design and complex systems analysis for facility projects at the Naval Surface Warfare Center Philadelphia Division. The scope of work includes conducting power quality, short circuit, load flow, and system coordination analyses, as well as developing utility connection details and electrical diagrams in compliance with the National Electrical Code. The selected provider is responsible for delivering detailed drawing packages and electrical systems analysis reports. This opportunity falls under NAICS code 541330 and is based in Philadelphia, Pennsylvania. Interested parties must respond by October 23, 2026.

Engineering Services

POSTED

DEADLINE

Ticket Release dates: 9/23 & 10/7; SAVE THE DATE: FY27 Naval Surface Warfare Center Phil Div (NSWCPD) Hybrid Industry Day

Solicitation # FY27Industryday

The Naval Surface Warfare Center, Philadelphia Division (NSWCPD) is hosting its FY27 Hybrid Industry Day on Thursday, November 5, 2026. This event is designed for businesses of all sizes to connect with NSWCPD leadership, department representatives, and small business specialists to explore upcoming contracting and subcontracting opportunities. The event will be held in a hybrid format, offering both in-person attendance at the Philadelphia Navy Yard and virtual participation via MS Teams. Registration for the event is managed through Ticket Tailor, with ticket releases scheduled in two rounds on September 23 and October 7, 2026. Interested parties should monitor the official notice for the registration link, attendance limits, and security requirements. This announcement serves as an informational notice and does not constitute a formal Request for Proposal or a guarantee of future procurement.

Convention and Trade Show Organizers

POSTED

DEADLINE

in about 1 month

Redundant Independent Mechanical Start System (RIMSS) battery chargers

Solicitation # 42-0342

The Naval Surface Warfare Center Philadelphia Division, under the Department of Defense, intends to procure sixty Redundant Independent Mechanical Start System battery charger kits. This procurement is being conducted as a sole source award to General Tool Company under the authority of FAR 6.302. The solicitation, identified by number 42-0342, falls under NAICS code 336320. The place of performance is located in Philadelphia, Pennsylvania. Interested parties or those with questions may contact Joseph Aprile via email or phone before the response deadline of September 30, 2026.

Motor Vehicle Electrical and Electronic Equipment Manufacturing

POSTED

DEADLINE

Seaport - CTF Design Services Follow On

Solicitation # N6449826R0020

Solicitation N6449826R0020 is a Small Business Set Aside for SEAPORT NXG MAC holders to provide design services for the Naval Surface Warfare Center Philadelphia Division (NSWCPD) Compatibility Test Facility (CTF). The requirement is for a five-year period of performance from March 9, 2027, to March 8, 2032, consisting of one base year and four option years. The contract is a Cost Plus-Fixed-Fee type, with an estimated labor requirement of 21,600 hours per year. The scope includes conceptual, preliminary, and detailed design for Hull, Machinery Electrical (HM&E) systems and equipment, as well as technical support for outfitting, installation, and environmental impact assessments. Key responsibilities include maintaining a whole-site computer-aided design model in AutoCAD and addressing critical facility issues such as floor loading, power availability, and support system capacities. The contractor must provide a multidisciplinary team of key personnel, including a Program Manager and various levels of design and mechanical engineers. Deliverables are managed through a comprehensive set of Contract Data Requirements Lists (CDRLs), covering everything from technical reports and cost estimates to as-built drawings and maintenance procedures. Award will be based on best value, evaluating technical approach, management, personnel, and past performance, with a tradeoff analysis possible between technical capability and total evaluated cost. The contractor is required to maintain a Quality Management System meeting ASQ/ANSI/ISO 9001:2015 standards and adhere to strict security and cybersecurity protocols, including DFARS 252.204-7012. Invoicing and payment will be processed electronically via Wide Area Workflow (WAWF).

Engineering Services

POSTED

DEADLINE

Forklift Maintenance

Solicitation # SIMACQ-PD-107-0018

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

in about 1 year

EMI Qualification Testing (MIL-STD-461G)This subcontract involves performing electromagnetic interference qualification testing for prime contractors supporting the Naval Surface Warfare Center Philadelphia Division. The scope of work focuses on the development and execution of test procedures for a USA-50 centrifugal purifier in accordance with MIL-STD-461G standards, utilizing an anechoic chamber or a specialized EMI/EMC testing facility. The selected provider is responsible for delivering an approved EMI Testing Qualification Test Procedure and a final qualification test report. The project is associated with NAICS code 541380 and is performed in Philadelphia, Pennsylvania, for the Department of Defense.

Testing Laboratories and Services

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS