Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Specialized Packaging and Preservation Services

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires specialized packaging, preservation, and marking services for finished aileron assemblies to meet military compliance standards. The packaging must utilize fiberboard materials with corner protection to ensure structural integrity during handling and transport, while preservation adheres to Code 10 specifications for clean and dry conditions to prevent corrosion and contamination. All labeling and marking must strictly follow MIL-STD-129 and DLA RP001 requirements to ensure accurate identification, traceability, and logistical compatibility across defense supply chains. This subcontract, issued by the Defense Logistics Agency under the Department of Defense, is classified under NAICS code 561910 for other support services. The work is intended to support military logistics operations, with performance expected to comply with all federal and defense-specific packaging regulations. The solicitation was posted in July 2026 and is associated with contract number SPE4A726D0385, indicating it is part of a broader procurement effort to maintain readiness and standardization in the distribution of aviation components.

General Info

Specialized packaging and marking of aileron assemblies per MIL-STD-129 and Code 10 for Defense Logistics Agency.

Agency

Department Of Defense → Defense Logistics Agency

NAICS

561910 - Packaging and Labeling Services

Place of Performance

Not specified

Set-Aside

NONE

Documents

This scope was carved out of SPE4A7-26-R-0605.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

SKIN, AIRCRAFT

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedJul 14

subcontract

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Defense Logistics Agency

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Provide military-compliant packaging, preservation (Code 10: CLNG/DRY), and marking of finished aileron assemblies using fiberboard, corner protection, and labeling per MIL-STD-129 and DLA RP001.

Similar Contracts

Same NAICS industry code

Medical Grade Packaging and Marking ServicesThis subcontract for Medical Grade Packaging and Marking Services supports prime contractors fulfilling DLA Troop Support Medical Supply Chain requirements for the Department of Defense. The scope of work involves the specialized packaging of ventilators into sealed units and commercial exterior containers in strict accordance with MIL-STD-2073-1E. Additionally, the provider must ensure all items are marked according to Medical Marking Standard No. 1 and include IUID labels as specified by MIL-STD-130. The primary objective of these services is to prepare ventilators for secure transport to Taiwan as part of Foreign Military Sales. This effort falls under NAICS code 561910 and is managed by the Medical Supply Chain MD Surg FSF. Interested parties should note the response deadline of November 6, 2026.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 13 hours ago

DEADLINE

MIL-SPEC Packaging and Distribution ServicesThis subcontract for MIL-SPEC Packaging and Distribution Services involves providing specialized military packaging, marking, and shipping for prime contractors supporting the Department of Defense C and T Supply Chain. The scope of work requires bundling insignia in plastic bags and sealed outer bags in strict accordance with MIL-STD-2073-1E, MIL-STD-129, and ASTM standards, utilizing industrial labeling equipment to ensure all government-compliant marking is accurate. The project culminates in the delivery of 4,000 packaged insignia to Arizona Industries for the Blind located in Phoenix, Arizona. This effort falls under NAICS code 561910 and is managed through the DLA Troop Support agency.

C AND T SUPPLY CHAIN

POSTED

about 13 hours ago

DEADLINE

MIL-STD 129 Compliant Packaging and MarkingThis subcontract, titled MIL-STD 129 Compliant Packaging and Marking, involves providing specialized packaging and marking services for prime contractors supporting DLA Aviation projects. The scope of work focuses on the marking of pilferable aviation electronics in accordance with MIL-STD 129 and the implementation of RP001 DLA Packaging Requirements for Procurement. To ensure compliance, the contractor must utilize military-grade packaging materials and labeling equipment that meet the DLA Master List of Technical and Quality Requirements, ultimately delivering fully packaged and marked shipments. Managed by the Department of Defense under the Land Supplier Operations SMSG, the contract falls under NAICS code 561910. The solicitation was posted on October 30, 2026, with a response deadline set for November 30, 2026.

LAND SUPPLIER OPERATIONS SMSG

POSTED

about 13 hours ago

DEADLINE

in about 1 month

Pharmacy Physical Inventory Staffing and ExecutionThis small business set-aside subcontract involves providing staffing and execution for pharmacy physical inventory services at the VAMC Murfreesboro within the Department of Veterans Affairs VISN 09 network. The selected contractor will perform comprehensive wall-to-wall physical counts of all non-controlled medications and supplies in both inpatient and outpatient pharmacies. This process requires the use of National Drug Code identifiers, section-level controls, and digital tools such as scanners, tablets, or handheld devices to ensure accuracy. Due to the nature of the work, the contractor must enter into a Business Associate Agreement to maintain compliance with healthcare privacy standards. The primary deliverable is a completed and verified physical count of the pharmacy inventory. Interested parties must respond by November 16, 2026, under NAICS code 561910.

249-NETWORK Contract Office 9 (36C249)

POSTED

about 18 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract involves providing specialized packaging and marking services for aerospace component projects supporting prime contractors for the Department of the Air Force. The scope of work requires strict adherence to MIL-STD-2073-1 for packaging and MIL-STD-129 for marking. Additionally, the contractor must ensure all wooden crates and pallets are debarked and processed through heat-treatment kilns to maintain full ISPM 15 compliance. The primary deliverable consists of 287 units of valves that must be packaged and marked to meet government acceptance standards at origin. This effort is managed under the Department of Defense through the Ok DLA Aviation At Oklahoma City agency, falling under NAICS code 561910.

Ok DLA Aviation At Oklahoma City

POSTED

about 18 hours ago

DEADLINE

in about 1 month

MIL-STD-2073 Packaging and Preservation ServicesThis subcontract involves providing specialized preservation, packaging, and labeling services for aviation components supporting DLA Aviation projects for the Department of the Navy. The contractor is responsible for ensuring all items are processed using military-grade moisture barriers and cushioning in strict accordance with MIL-STD-2073, while applying all necessary shipping labels and markings per MIL-STD-129. The final deliverable is a fully packaged and labeled item ready for FOB Destination shipment. The project is managed by the Pa DLA Aviation office in Philadelphia, with the place of performance located in Philadelphia, Pennsylvania. This opportunity falls under NAICS code 561910 and was posted on October 30, 2026, with a response deadline of November 9, 2026.

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

Specialized Military Packaging and Marking ServicesThis subcontract for Specialized Military Packaging and Marking Services supports prime contractors on NAVSUP Weapon Systems Support projects for the Department of the Navy. The scope of work involves performing military-grade packaging and labeling for transducers to ensure they are ready for shipment. All activities must adhere to strict military standards, specifically utilizing MIL-STD-2073-1 for packaging and marking, and MIL-STD-129 section 4.2.2 for the application of water-resistant Depot Level Repairable labels across unit, intermediate, and shipping containers. The project requires the use of military-specification packaging materials and specialized labels to meet rigorous defense requirements. Performance will take place in Mechanicsburg, Pennsylvania, under NAICS code 561910. Interested parties should note the response deadline of November 30, 2026.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

in about 1 month

Military Standard Packaging and Marking ServicesThis subcontract for Military Standard Packaging and Marking Services supports prime contractors on Navsup Weapon Systems Support aerospace projects. The scope of work involves the specialized packaging of cylinders according to MIL-STD-2073 and the application of markings per MIL-STD-129 to ensure compliance for both CONUS and OCONUS shipments. The contractor is responsible for utilizing military-standard materials and equipment to prepare cylinders for transport to designated DODAAC addresses. The project is managed under the Department of the Navy and will be performed in Philadelphia, Pennsylvania. Interested parties should note the response deadline of November 30, 2026. The services fall under NAICS code 561910, focusing on the delivery of properly packaged and marked aerospace components ready for immediate transport.

Navsup Weapon Systems Support

POSTED

DEADLINE

in about 1 month

Military-Grade Packaging and Marking (MIL-STD-2073/129)This subcontract involves providing specialized defense packaging and marking services for prime contractors supporting the DLA Weapons Support Maritime Supply Chain. The scope of work requires the packaging and labeling of 202 units in strict accordance with MIL-STD-2073-1E and MIL-STD-129 standards, specifically ensuring compliance with QUP:001 PRES MTHD:10 requirements. To achieve this, the contractor must utilize industrial labeling equipment along with military-specification anti-static bagging and moisture barriers. Managed under NAICS code 561910 for the Department of Defense, the project focuses on preparing items for destination acceptance. The solicitation was posted on October 29, 2026, with a response deadline set for November 13, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Medical Grade Packaging and Marking ServicesThis subcontract for Medical Grade Packaging and Marking Services supports prime contractors on DLA Troop Support Medical Supply Chain projects. The scope of work involves the supply and application of specialized medical packaging and marking, ensuring all materials are processed using sealed unit containers and commercial exterior shipping containers. All activities must be performed in strict accordance with Medical Marking Standard No. 1 to ensure medical units are properly marked, sealed, and ready for final shipment. Managed under the Department of Defense through the Medical Supply Chain MD SURG FSF, the project falls under NAICS code 561910. The solicitation was posted on October 29, 2026, with a response deadline of November 4, 2026. This effort focuses on maintaining rigorous standardization and quality control for the transport of critical medical supplies.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Aerospace Component Packaging and Marking ServicesThe Aerospace Component Packaging and Marking Services subcontract involves providing specialized packaging, marking, and palletization for aircraft components supporting the Department of Defense. The contractor is responsible for processing 370 units destined for the DLA Distribution Depot Oklahoma, ensuring all work is performed at Tinker AFB. All activities must strictly adhere to MIL-STD-2073-1E and RP001 for packaging, while markings must comply with MIL-STD-129, including the accurate application of NSN and CAGE codes using industrial marking equipment and approved cushioning materials. This requirement is managed under the DLA Weapons Support Land Supplier Opns Vehicle Spt agency with a NAICS code of 561910. The solicitation was posted on October 29, 2026, with a response deadline of November 9, 2026. The primary objective is to ensure that prime contractors receive high-standard logistics support to maintain the integrity and traceability of aerospace components during transport and storage.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Supply of Reed Relays (NSN 5945011488455)This subcontract, issued by the Department of Defense through the DLA Weapons Support Fluid Handling Division, requires the supply of 15 Reed Relays under NSN 5945011488455 for prime contractors on defense procurement projects. The performance of this contract takes place in Tracy, California, and falls under NAICS code 561910. The contractor must ensure all units are packaged according to MIL-STD-2073-1E and marked in accordance with MIL-STD-129, with lead finish identification applied per IPC/JEDEC J-STD-609. Additionally, the supplier must strictly comply with DFARS regulations regarding the prohibition of hexavalent chromium and covered telecommunications equipment.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Battery Testing and Certification ServicesThis subcontract for Battery Testing and Certification Services, issued by the Defense Logistics Agency under the Department of Defense, requires the performance of First Article Testing and Government Production Lot Testing for prime contractors. The selected provider will be responsible for validating assemblies in accordance with QAP 81337 11-1-9487 and preparing DD1222 forms for submission to the U.S. Army Combat Capabilities Development Command. Deliverables include certified test reports and samples, with a strict requirement for ISO 9001 quality management certification. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 541380. Interested parties must adhere to the response deadline of November 2, 2026. This contract ensures that critical battery components meet rigorous military specifications and quality standards before being integrated into the supply chain.

Testing Laboratories and Services

POSTED

about 13 hours ago

DEADLINE

HAZMAT Packaging and LogisticsThis SBA Total Small Business Set-Aside subcontract involves providing specialized packaging, marking, and transportation services for battery assemblies supporting Defense Logistics Agency supply contracts. The contractor is responsible for ensuring all packaging and marking adhere to MIL-STD-2073-1E, RP001, and MIL-STD-129 standards, while also preparing necessary HAZDEC certifications. Final delivery of the processed assemblies is required at DMO Camp Kinser, Japan. To qualify for this performance, the contractor must maintain IP025 HAZMAT certification and strictly comply with 29 CFR 1910.1200 safety regulations. The project falls under NAICS code 562112 and is managed through the Department of Defense.

Hazardous Waste Collection

POSTED

about 13 hours ago

DEADLINE

Critical Safety Battery Assembly ServicesThis subcontract for Critical Safety Battery Assembly Services involves the physical assembly of battery units for prime contractors supporting Defense Logistics Agency supply contracts. The scope of work includes the integration of cells, wiring, and housing in strict accordance with Reference Drawing NR 81337 11-1-9467 and QAP 81337 11-1-9487 to deliver completed Battery Assemblies under NSN 6140-01-609-7775. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 335910. Due to the nature of the work, the contractor must maintain CMMC Level 2 certification for the handling of Covered Defense Information and ensure full compliance with ITAR and EAR regulations. The solicitation was posted on October 30, 2026, with a response deadline of November 2, 2026.

Battery Manufacturing

POSTED

about 13 hours ago

DEADLINE

Li-Ion Battery Cell SupplyThis subcontract, issued by the Defense Logistics Agency under the Department of Defense, involves the manufacture and supply of high-grade Lithium-Ion battery cells for prime contractors. The cells must be produced in accordance with TDP Rev B Gen 4 specifications and must be free of intentionally added mercury as per NAVSEA 5000-003D. The selected provider is required to deliver comprehensive material certifications and quality documentation to ensure all technical standards are met. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 335911. Strict adherence to ITAR and EAR compliance is mandatory, and the supplier must hold HAZDEC certification. Interested parties must submit their responses by November 2, 2026, to provide certified battery cells that meet these rigorous defense requirements.

Storage Battery Manufacturing

POSTED

about 13 hours ago

DEADLINE

Military-Grade Oxygen Component PackagingThis subcontract involves the specialized packaging, marking, and sealing of oxygen-cleaned components to support prime contractors fulfilling Defense Logistics Agency supply contracts. The scope of work requires strict adherence to IP042 oxygen clean packaging standards, MIL-STD-2073-1E, and RP001 DLA requirements, specifically utilizing non-outgassing materials to ensure component integrity. Additionally, all items must be marked in accordance with MIL-STD-129. The primary objective is the delivery of packaged valves prepared for international shipment to Maestranza Aerea de Madrid. This effort is managed under the Department of Defense through the Defense Logistics Agency, with a response deadline of November 7, 2026.

Freight Transportation Arrangement

POSTED

about 13 hours ago

DEADLINE

MIL-STD-1330D Oxygen Cleaning ServicesThis subcontract for the Defense Logistics Agency involves providing specialized cleaning and drying services for oxygen system components. The primary objective is to support prime contractors by ensuring all components are free of hydrocarbons and contaminants to prevent combustion in high-pressure environments. All work must be executed within certified oxygen-cleaning facilities using approved solvents in strict accordance with MIL-STD-1330D standards. The project falls under NAICS code 811310 and requires the delivery of certified Oxygen Clean components. Interested parties should note the response deadline of November 7, 2026, for this Department of Defense requirement.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

about 13 hours ago

DEADLINE

Oxygen System Check Valve SupplierThis subcontract through the Defense Logistics Agency involves the supply of two 1/4 inch check valves intended for prime contractors supporting Spanish Air Force supply contracts. The required components must meet NSN 4820-00-232-7570 specifications, specifically referencing manufacturer part number 2192-502-007-1 from Mission Systems Orchard Park Inc. Technical requirements mandate that the valves be constructed from high-pressure oxygen-compatible materials capable of supporting a maximum operating pressure of 500 PSI. The solicitation was posted on October 30, 2026, with a response deadline of November 7, 2026, falling under NAICS code 332911.

Industrial Valve Manufacturing

POSTED

about 13 hours ago

DEADLINE

SWITCH, RADIO FREQUENCY

Solicitation # SPE7M5-27-Q-0121

POSTED

about 13 hours ago

DEADLINE

VALVE, CHECK, OXYGEN SYS

Solicitation # SPE7MC-27-Q-0041

Solicitation SPE7MC-27-Q-0041 is a small business set-aside for the procurement of two 1/4 inch check valves for oxygen systems, identified by NSN 4820-00-232-7570. These critical application items must support a maximum operating pressure of 500 PSI and are specified as part number 2192-502-007-1 from Mission Systems Orchard Park Inc. The contract is established as a firm fixed price award with a delivery timeline of 147 days after order. The final destination for these supplies is the Spanish Air Force at Maestranza Aerea de Madrid in Spain, with both inspection and acceptance occurring at the destination. The contractor must adhere to stringent technical and quality standards, including cleaning and drying requirements per MIL-STD-1330D for oxygen cleaned items and compliance with IP042 oxygen clean packaging and marking requirements. Packaging must follow MIL-STD-2073-1E and RP001 DLA packaging requirements, while marking must align with MIL-STD-129. Award decisions will be based on best value, evaluating price, offered delivery, and past performance. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various FAR and DFARS clauses regarding cybersecurity, domestic origin, and hazardous material labeling.

Industrial Valve Manufacturing

POSTED

about 13 hours ago

DEADLINE

Solicitation # SPE8E4-27-T-0125

Solicitation SPE8E4-27-T-0125 is a total small business set-aside issued by the Defense Logistics Agency Troop Support Construction and Equipment Metals office for the procurement of 51 feet of metal bar. The material is specified as Steel Comp M2, hot rolled or forged, round and annealed, with a 6.000 inch diameter and lengths between 6 and 12 feet, weighing 105.740 lb/ft. This is a Foreign Military Sale requirement for delivery to the Parts-Attach General Depot in Tainan City, Taiwan, with a required delivery date of October 8, 2026, and a delivery window of 20 days after order. Inspection and acceptance are conducted at the point of origin. The contract mandates strict adherence to technical and quality standards, including ASTM A600-92A and QAP 13873. A Certificate of Quality Compliance is required for every shipment. Eligibility for award is restricted to suppliers listed on the Qualified Suppliers List for Distributors (QSLD). Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and RP001, with specific requirements for continuous identification markings including the contract delivery order number, NSN, and manufacturer details. Payment requests and receiving reports must be processed electronically through the Wide Area WorkFlow system.

Iron and Steel Forging

POSTED

about 13 hours ago

DEADLINE

CLEANING KIT, GUN

Solicitation # SPE7L7-27-T-0313

Solicitation SPE7L7-27-T-0313 is a fixed-price request for quotations issued by the Defense Logistics Agency Weapons Support Land Supplier Operations for the procurement of two gun cleaning kits (NSN 1005-01-728-6872). These items are designated as critical gun parts with unique requirements and must be delivered to NSWC Crane within 20 days after receipt of order. The procurement is subject to strict technical specifications, including basic drawing 30003 3392AS1330 and several reference drawings. Quality assurance is paramount, requiring the manufacturer's inspection system to comply with SAE AS9003 or ISO 9001 tailored to SAE AS9003, with inspections and acceptance conducted at the origin by a DCMA QAR. The contract incorporates rigorous compliance and security standards, including CMMC Level 2 self-assessment or third-party certification and adherence to ITAR or EAR export controls for technical data. Packaging and marking must follow MIL-STD-2073-1 and MIL-STD-129, with specific requirements for hazardous material labeling per 29 CFR 1910.1200. Administrative requirements include the use of the Wide Area Workflow system for electronic invoicing and payment. Additionally, offerors must comply with the Buy American Act and Berry Amendment, and are prohibited from using additive manufacturing processes unless specifically authorized.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 13 hours ago

DEADLINE

WAVEGUIDE ASSEMBLY

Solicitation # SPE7M5-27-Q-0107

POSTED

about 13 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS