This Government Contract opportunity from Oregon was posted on August 13, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Specialized Seismic Hardware Supplier

Closed

State & Local

Submission Closed09/11/2026, 11:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332312

New

ACE-1199-1386-00 Tower Design and Fabrication for Various RCAG/RTR Sites (ADM, DPA, ONL, and RWF)

Solicitation # ace-1199-1386-00-tower-design-fabrication-various-rcagrtr-sites-adm-dpa-onl-rwf

Parsons Corporation is soliciting bids for the design, fabrication, and delivery of towers for various RCAG/RTR sites located in Oklahoma, Illinois, Nebraska, and Minnesota, specifically serving the ADM, DPA, ONL, and RWF locations. This project falls under NAICS code 332312 and requires that the selected offeror be fully bonded and insured to perform the work. The opportunity is set aside for small businesses, including certified Veteran Owned, Service-Disabled Veteran Owned, Women-Owned, and HUBZone small businesses. Interested parties must submit their responses by November 2, 2026. The primary point of contact for this solicitation is Thomas Sheehan.

POSTED

DEADLINE

Solicitation # SPE7M0-27-T-0724

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

SCREW, CLOSE TOLERANCE

Solicitation # SPE4A6-27-T-7135

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Tunnel Liner Plate Material Supplier

Dot084500 Capital Program Administration Dotd8, Dot-dept Of Transportation

POSTED

DEADLINE

Aluminum Fabrication and Welding for HWRS UnitsThis small business set-aside subcontract involves the fabrication and structural welding of MK 2 MOD 0 Helicopter Weapon Recovery Systems for prime contractors supporting NUWC Division Newport projects. The scope of work requires the use of the MIG/GMAW process with class CL ER4043 / AWS A5.10 filler metal, strictly adhering to build-to-print drawings. All deliverables must include First Article and production units accompanied by Certificates of Conformance. To ensure quality and compliance, all welders must hold AWS D1.2 certification and maintain active WPQ/AWS registration. The opportunity is categorized under NAICS code 332312 and is managed under the Department of Defense. Interested parties must respond by November 10, 2026.

Nuwc Division Newport

POSTED

DEADLINE

Integrated Water Tank and Storage FabricationThis subcontract involves the fabrication and supply of integrated water tank and fuel storage assemblies for prime contractors supporting DLA Troop Support projects. The scope of work requires the manufacture of an insulated potable water tank with a minimum capacity of 80 gallons, featuring an integrated storage rack capable of holding at least five 5-gallon fuel cans. The selected provider is responsible for the delivery of the fully installed assembly. The project is categorized under NAICS code 332312 and will be performed in Natick. Interested parties must adhere to the response deadline of November 4, 2026. This effort is managed under the Department of Defense for the DLA Troop Support agency.

POSTED

DEADLINE

Tactical Chassis FabricationThe Tactical Chassis Fabrication subcontract, issued by the Department of Defense under agency W6QK Acc-Apg, involves the production of lightweight and ruggedized housing and chassis for aircraft interior decontamination projects. These components are designed for the Joint Project Manager for CBRN Special Operations Forces and must be manufactured using composite materials and lightweight alloys. Each enclosure is required to fit within a 42 by 18 by 18 inch envelope and maintain a total weight of 150 pounds or less. To ensure operational viability, all deliverables must adhere to MIL-STD-1472 human engineering and lift requirements, resulting in a transportable chassis with integrated stowage. The project is categorized under NAICS code 332312 and will be performed in Abell. Interested parties must submit their responses by the deadline of November 24, 2026.

POSTED

DEADLINE

Stator Core Lamination FabricationThis subcontract involves the design, manufacture, and testing of stator core laminations and core clamping systems for Unit 1 of USACE Tulsa District hydroelectric projects. The scope of work includes precision engineering and fabrication of specialized steel laminations and clamping hardware, followed by rigorous structural and electrical integrity testing to ensure compliance with USACE specifications. The project requires the delivery of one complete stator core lamination and clamping system. Managed under the Department of Defense through the W076 Endist Tulsa agency, the performance of the contract is centered in Eufaula. The solicitation is categorized under NAICS code 332312, with a response deadline set for November 13, 2026.

POSTED

DEADLINE

Steel and Other Metal Materials for the Marietta Repair Station: Stamford De-Watering Box Material PH 1

Solicitation # W9123727QA011

Solicitation W9123727QA011 is a firm-fixed price commercial supply contract issued by the US Army Corps of Engineers, Huntington District, for the procurement of various steel and metal materials to support the Stamford De-Watering Box project at the Marietta Repair Station in Ohio. This procurement is a 100 percent small business set-aside under NAICS code 332312. The required materials include a wide array of ASTM standard products, specifically ASTM 1018 CR round bars, ASTM A434 CL bc, ASTM A53 seamless pipe, ASTM 1026 seamless tubing, ASTM A36 plates and bars, ASTM A709 Gr 50 plates, T-beams, and flat bars, as well as ASTM A325 fasteners. Specialized fabrication is required for certain ASTM 709 Gr 50 plates, including 1/8 inch tolerances and 45-degree double bevels as specified in the technical drawings. The selected vendor is responsible for arranging shipping to the Marietta Repair Station, with the government handling the unloading of materials upon arrival. All deliveries must be completed within eight weeks of the award date and must be accompanied by traceable mill certifications and testing reports. To be eligible for award, firms must be registered in the System for Award Management and comply with DFARS clauses 252.225-7001 and 252.225-7002 regarding the Buy American and Balance of Payments Program and Qualifying Country Sources as Subcontractors. The contract will be awarded using simplified acquisition procedures, and final invoicing is to be submitted via email once all materials are delivered onsite.

W072 Endist Huntington

POSTED

DEADLINE

Solicitation # SPE8EF-27-T-0145

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Environmental Control Work Booth/ Sanding Booth.

Solicitation # FA480027Q0005

The 633rd Contracting Squadron at Langley Air Force Base is conducting market research via a Sources Sought notice to identify capable companies for the procurement of an Environmental Control Work Booth/Sanding Booth. This self-contained system will be used for sanding and preparing aircraft components at the 1st Fighter Wing's Low Observable Consolidated hangar at Joint Base Langley-Eustis. The booth must measure 22 feet wide, 8 feet deep, and 8 feet high, featuring two 15 hp motors rated at 20,000 cfm and a filtration system consisting of 24 flame retardant Nanofiber cartridge filters and HEPA afterfilters capable of collecting hexavalent chromium particulate. The system must integrate with 600V power, fire suppress water lines, and direct air lines provided by the MAC contractor. This is currently a Request for Information and not a formal solicitation. Interested small businesses under NAICS 332312 are invited to provide feedback on the Statement of Requirements and the feasibility of a 12 to 14 week delivery timeline. A site visit is scheduled for November 3, 2026, at 2:00 PM EST, requiring attendees to wear OSHA-approved hard hats and reflective vests. Responses must be submitted on company letterhead via email to Kelly Voigts by November 13, 2026. Final delivery of the equipment is expected on or before February 5, 2027.

POSTED

DEADLINE

Purchase of 2 or 3 Temporary Road Bridges

Solicitation # 12444627Q0004

Solicitation 12444627Q0004 is a Request for Quotation issued by the Department of Agriculture for the purchase of two to three 20-foot temporary road bridges for the Superior National Forest. This acquisition is a Total Small Business Set-Aside under NAICS code 332312, with a size standard of 25 million dollars. The bridges must be delivered to the Isabella Work Station Storage Yard in Isabella, Minnesota, with the FOB point established as the contractor's facility. Technical specifications require adherence to AASHTO LRFD Bridge Design Specifications for deflection and AASHTO M168 for lumber and timber, with specific requirements for ASTM A307 galvanized hardware and AWPA-compliant copper naphthenate treatment. Award will be granted to the highest technically rated offeror, provided the price is fair and reasonable and past performance is acceptable or neutral. Evaluation focuses on the technical approach, specifically the ability to meet schedule requirements and a thorough understanding of the Statement of Work. Interested small businesses must submit a signed SF1449, a completed Schedule of Items, and a technical narrative in PDF format to Debra Derickson by November 10th at 1:00 PM Central Time. The contract is governed by FAR Part 12 for commercial items and includes various federal and agency-specific clauses regarding security, whistleblower rights, and electronic payment submissions.

Csa East 7 Usda-Fs

POSTED

about 19 hours ago

DEADLINE

in 14 days

AI Contract Overview

This subcontract for the Central Linn School District involves the procurement of specialized seismic hardware and attachments to support facility projects in Halsey, Oregon. The supplier is responsible for providing in-plane and out-of-plane attachments as well as seismic isolation joints, ensuring all specialized hardware and isolation components are delivered directly to the project site for use by prime contractors. The opportunity was posted on August 13, 2026, with a response deadline of September 11, 2026. Classified under NAICS code 332312, the contract focuses on the delivery of critical structural components necessary for seismic safety and compliance within the district's infrastructure projects.

General Info

Subcontract for seismic hardware and isolation joints for Central Linn School District projects.

Agency

Oregon → Central Linn School District

NAICS

332312 - Fabricated Structural Metal Manufacturing

Place of Performance

Halsey, OR, 97348, USA

Set-Aside

NONE

Documents

This scope was carved out of S-P22100-00017765.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

CLES Gym & Cafeteria Seismic Rehab CMGC RFP

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedAug 13

subcontract

Response DeadlineSep 11

Deadline has passed

Submission Closed

09/11/2026, 11:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyOregon → Central Linn School District

ContactsNo contacts available

OfficeN/A

Organization / AgencyOregon → Central Linn School District

Office AddressN/A

ContactsNo contact information available

Full Description

Supplies specialized seismic connectors and attachments for prime contractors on Central Linn School District facility projects. Provides in-plane and out-of-plane attachments and seismic isolation joints. Delivers specialized hardware and isolation components to the project site.