Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Specialized Surface Treatment and Coating for Mounting Plates

Active

Federal

Response Deadline11/09/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract opportunity is for the provision of specialized surface treatments and coatings for mounting plates supporting the DLA Weapons Support Land Supply Chain. The selected contractor must utilize industrial plating lines to apply finishes in strict accordance with Drawing 19200 13011808 and military finish specifications, ensuring that no Class I Ozone Depleting Chemicals are used during the process. Due to the nature of the technical drawings, JCP certification is a mandatory requirement for access. The project is designated as a Total Small Business Set-Aside under NAICS code 332813 and is managed by the Department of Defense. Performance will take place in New Cumberland, Pennsylvania. Interested parties must submit their responses by November 9, 2026, to provide the finished and coated mounting plates as required by the agency.

General Info

Small business subcontract for specialized mounting plate coatings in New Cumberland, Pennsylvania.

Agency

Department Of Defense → DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

NAICS

332813 - Electroplating, Plating, Polishing, Anodizing, and Coloring

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

SBA

Documents

This scope was carved out of SPE7L1-27-T-2667.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

PLATE, MOUNTING

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 27

subcontract

Response DeadlineNov 9

Submission deadline

Response Deadline

11/09/2026, 05:00:00 PM UTCin 12 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs surface treatments and coatings for prime contractors on DLA Weapons Support Land Supply Chain projects. Applies finishes per Drawing 19200 13011808 without the use of Class I Ozone Depleting Chemicals. Requires industrial plating lines and adherence to military finish specifications. JCP certification required for technical drawing access. Delivers finished, coated mounting plates.

Similar Contracts

Same NAICS industry code

Aerospace Surface Treatment and FinishingThis subcontract for Aerospace Surface Treatment and Finishing involves providing specialized surface treatments, plating, and anti-corrosion coatings for prime contractors supporting the DLA Weapons Support ASC Supplier OEM Division. The scope of work specifically requires the application of aerospace-grade plating or passivation to Drag Brace Nuts in accordance with technical drawings for part number 204-011-144-003. The contractor must ensure strict compliance with FED-STD-313 standards and adhere to IP025 guidelines for the packaging of hazardous materials. Final deliverables include finished nuts with verified coating thickness, with performance taking place in New Cumberland. The response deadline for this opportunity is November 5, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 2 hours ago

DEADLINE

Aerospace Heat Treatment and Surface CoatingThis subcontract for Aerospace Heat Treatment and Surface Coating involves providing specialized heat treatment and surface finishing services for gearbox components on DLA aircraft projects. The contractor is responsible for applying aerospace-grade coatings to ensure all components meet strict hardness and wear-resistance specifications while maintaining full compliance with the Hazard Communication Standard 29 CFR 1910.1200 regarding hazardous materials. Managed under the Department of Defense, the work will be performed at Hill AFB. The solicitation was posted on October 28, 2026, with a response deadline of November 9, 2026. The project falls under NAICS code 332813 and focuses on the delivery of fully treated and coated gearbox components to prime contractors.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 2 hours ago

DEADLINE

Aerospace Component Finishing and CoatingThis subcontract for Aerospace Component Finishing and Coating involves providing specialized surface treatments, plating, and coatings for tube components supporting the DLA Weapons Support Fluid Handling Division. The contractor must apply finishes in strict accordance with Boeing TDP Rev B Gen 2 standards while ensuring that no Class I ozone-depleting chemicals are used during the process. All coating thickness must be verified to meet rigorous aerospace standards. To be eligible, the provider must maintain both NADCAP and ISO 9001:2015 certifications. The work is categorized under NAICS code 332813 and will be performed in New Cumberland. Interested parties must respond by November 9, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 2 hours ago

DEADLINE

Aerospace Surface Treatment and FinishingThis subcontract for Aerospace Surface Treatment and Finishing supports the DLA Weapons Support ASC by providing specialized plating and coating services for crew door levers. The contractor is responsible for applying aerospace-approved finishes that adhere to MIL-STD specifications, specifically utilizing alternatives to hexavalent chromium to ensure components are ready for final assembly. To qualify, providers must maintain ISO 9001 or AS9100 certification and possess industrial plating systems. The work is performed at Hill AFB, and interested parties must respond by November 5, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 2 hours ago

DEADLINE

Military-Grade Finishing and Coating for Stowage BoxThis subcontract involves providing military-grade surface treatment and coating services for stowage box components under DLA Weapons Support. The selected provider will be responsible for preparing surfaces and applying coatings according to the Technical Data Package for NSN 2540-01-620-2434, with a strict prohibition on the use of class I ozone-depleting chemicals. Performance will take place in Fort Hood, and the contractor must deliver finished, coated metal components. To qualify, the contractor must possess industrial coating booths and chemical pretreatment tanks. Additionally, the provider is required to maintain certification in either ISO 9001 or SAE AS9003 quality management standards. This opportunity is categorized under NAICS code 332813 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 2 hours ago

DEADLINE

NADCAP Certified Black Oxide or Magnesium Phosphate CoatingThis subcontract opportunity with the DLA Weapons Support Land Supply Chain involves providing specialized chemical coating services for prime contractors. The scope of work requires the application of Black Oxide coating according to MIL-C-13924 or Magnesium Phosphate coating per MIL-DTL-16232, utilizing industrial chemical baths and curing equipment to ensure all delivered hardware meets these specific military standard finishes. A critical requirement for this contract is that the provider must hold PRI certification to the NADCAP standard. Interested parties should note that the response deadline is November 9, 2026, and the work falls under NAICS code 332813.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

Aerospace Surface Treatment and CoatingThis subcontract for Aerospace Surface Treatment and Coating is issued by the Department of Defense under the DLA Weapons Support ASC Supplier Order OEM Division. The project involves performing specialized surface treatments for prime contractors, specifically executing anodizing, passivation, and plating on regulator components. All work must be performed in accordance with the Technical Data Package and DLA Master List RA001, requiring the contractor to possess industrial plating tanks and curing ovens. The contract is a Total Small Business Set-Aside under NAICS code 332813, with the place of performance located in Cherry Point. Contractors must strictly comply with FAR 52.223-7 regarding the handling of hazardous materials to ensure the safe delivery of components meeting all technical specifications. The response deadline for this opportunity is November 5, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 2 hours ago

DEADLINE

Industrial Coating and Finishing

CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

about 2 hours ago

DEADLINE

Aerospace Surface Treatment and Heat TreatingThis subcontract for Aerospace Surface Treatment and Heat Treating involves providing specialized plating, coating, and hardness treatments for shafts and gears used in Aircraft Drive Assembly NSN 1730-01-511-7829. The services support prime contractors delivering on Department of Defense supply contracts for the Defense Logistics Agency. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 332813. The contractor is required to maintain NADCAP certification and must provide a certification of treatment with all delivered components. Additionally, the provider must supply Safety Data Sheets in compliance with 29 CFR 1910.1200(g). The response deadline for this opportunity is November 9, 2026.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 2 hours ago

DEADLINE

Industrial Coating and Finishing for Manhole AssembliesThis subcontract for Industrial Coating and Finishing for Manhole Assemblies involves providing surface treatment and anti-corrosion coating services for prime contractors on DLA Troop Support projects. The scope of work includes the surface preparation and application of protective finishes on manhole closure assemblies, ensuring all deliverables meet DLA quality standards and are ready for final assembly. All operations must strictly adhere to 29 CFR 1910.1200 regarding the labeling of hazardous materials. The opportunity is designated as a Service-Disabled Veteran-Owned Small Business set-aside under NAICS code 332813 for the Department of Defense. Performance will take place in Texarkana, Texas. Interested parties should note the response deadline of November 9, 2026.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 2 hours ago

DEADLINE

Industrial Coating and Finishing (Brake Pedals)This subcontract for Industrial Coating and Finishing focuses on providing surface treatment and plating services for brake pedal assembly projects supporting DLA Troop Support. The selected contractor is responsible for applying powder coating, anodizing, and other protective coatings to metal components in strict accordance with TDP drawings and the DLA Master List of Technical and Quality Requirements. The work will be performed in Bremerton, Washington, under the oversight of the Department of Defense. A critical component of the performance involves the rigorous management of hazardous materials in compliance with Federal Standard No. 313 and 29 CFR 1910.1200(g). Responses for this opportunity are due by November 9, 2026.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 2 hours ago

DEADLINE

Chemical Coating Services (Black Oxide or Magnesium Phosphate)This subcontract involves providing specialized anti-corrosive chemical coating services for the DLA Weapons Support Land Supply Chain. The scope of work requires the application of either Black Oxide per MIL-C-13924 or Magnesium Phosphate per MIL-DTL-16232 to a single coated threaded rod end. All work must be performed using compliant chemical baths and application tanks. Qualified contractors must hold the necessary certifications to perform coatings according to the cited military specifications and possess the capability to handle components restricted by ITAR and EAR regulations. The project is categorized under NAICS code 332813 and is managed through the Department of Defense.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

Same awarding agency

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports prime contractors on DLA Weapons Support Land Supply Chain projects. The selected provider will perform military-grade packaging and marking of components in accordance with MIL-STD-2073-1E and MIL-STD-129 standards. Key technical requirements include the use of heat-sealed barrier bags, Special Marking Code ZZ, and the utilization of specialized heat-sealing equipment and military-standard labeling systems to ensure products are ready for FOB Origin shipment. The project is managed under the Department of Defense for the DLA Weapons Support Land Supply Chain, with performance taking place at Fort Bliss, Texas. Interested parties must respond by November 9, 2026, for this opportunity categorized under NAICS code 339999.

All Other Miscellaneous Manufacturing

POSTED

about 2 hours ago

DEADLINE

Vehicular Suspension Strut Cartridge FabricationThis subcontract involves the fabrication of vehicular suspension strut cartridges, specifically Part Number 100953, for prime contractors supporting the DLA Weapons Support Land Supply Chain. The work requires the use of precision CNC machining and assembly to meet all DLA Master technical and quality requirements, with the final finished cartridges delivered for use in Department of Defense operations. Performance of this contract takes place in Fort Bliss and mandates strict adherence to the Buy American Act and the Berry Amendment regarding material sourcing. Additionally, the contractor must comply with NIST SP 800-171 cybersecurity standards to ensure the protection of sensitive information. The project falls under NAICS code 336390.

Other Motor Vehicle Parts Manufacturing

POSTED

about 2 hours ago

DEADLINE

MIL-SPEC Packaging and Export PreparationThis subcontract for MIL-SPEC Packaging and Export Preparation supports the DLA Weapons Support Land Supply Chain. The selected provider is responsible for supplying specialized packaging materials and performing professional packing and marking services for prime contractors. All work must adhere to strict military standards, specifically MIL-STD-2073-1E and MIL-STD-129, with palletization following DLA requirement RP001. The scope of work involves using MIL-SPEC cushioning and dunnage to prepare brackets for FOB Origin shipment to South Korea. The final deliverable is a shipment-ready, labeled, and palletized bracket. This opportunity is categorized under NAICS code 488510 and is managed through the Department of Defense.

Freight Transportation Arrangement

POSTED

about 2 hours ago

DEADLINE

Precision Machining/Fabrication of Vehicular Component BracketThis subcontract involves the precision machining and fabrication of one Vehicular Component Bracket, identified by NSN 2590-01-674-1574, for the DLA Weapons Support Land Supply Chain. The selected provider must utilize CNC milling or turning to manufacture the bracket according to the specific dimensions and tolerances outlined in the RA001 technical requirements. To be eligible, contractors must hold ISO 9001:2015, CMMC Level 2, and US/Canada Joint Certification Program certifications. The project falls under NAICS code 332710 and requires the delivery of one finished component. Responses are due by November 9, 2026.

POSTED

about 2 hours ago

DEADLINE

Extension Drawer Slide Supplier

Hardware Manufacturing

POSTED

about 2 hours ago

DEADLINE

Freight and Transportation ServicesThis subcontract for Freight and Transportation Services involves the transport and delivery of vehicle components for prime contractors supporting Department of Defense projects. Managed by the DLA Weapons Support Land Supply Chain, the scope of work includes coordinating shipments from the manufacturer and managing ocean freight specifically utilizing U.S.-flag vessels. The contractor is responsible for providing rated on board vessel operating carrier's ocean bills of lading and ensuring strict compliance with MARAD reporting requirements. The project requires the successful delivery of 113 units to the destination in Barstow, California, accompanied by full shipping documentation. This effort falls under NAICS code 488330, with a response deadline set for November 9, 2026.

Navigational Services to Shipping

POSTED

about 2 hours ago

DEADLINE

Supply of Air Conditioning-Heating Collars (IVECO A4249)This subcontract involves the procurement and supply of 113 air conditioning-heating collars for prime contractors working on Department of Defense projects. The specific requirement is for IVECO Defence Vehicles S.P.A. A4249 part number 5801472199, which corresponds to NSN 4520150276028. The selected provider is responsible for sourcing, procuring, performing quality assurance, and managing the packaging for final delivery. Managed by the DLA Weapons Support Land Supply Chain, the contract requires the provider to be registered in both SAM.gov and WAWF. Performance for this requirement is centered in Barstow, California, under NAICS code 423810. The response deadline for this opportunity is November 9, 2026.

Construction and Mining (except Oil Well) Machinery and Equipment Merchant Wholesalers

POSTED

about 2 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports the DLA Weapons Support Land Supply Chain by providing specialized military-grade packaging for prime contractors delivering components to Guam. The scope of work involves the packaging of critical aerospace components, specifically a brake disc, ensuring all deliverables are shipment-ready and strictly adhere to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking and labeling. The contractor is required to use MIL-SPEC compliant packing materials that are free from Class I ozone-depleting chemicals. Performance will take place in Santa Rita, Guam, under NAICS code 561910. The solicitation was posted on October 28, 2026, with a response deadline of November 9, 2026.

Packaging and Labeling Services

POSTED

about 2 hours ago

DEADLINE

Manufacturing of Brake Disc (NSN 2530-01-713-9297)This subcontract involves the manufacture of one high-precision brake disc, identified by NSN 2530-01-713-9297 and Part Number 627-8476-003, for the DLA Weapons Support Land Supply Chain. The project requires precision machining and grinding performed to Oshkosh Aerotech specifications using high-tolerance CNC machining centers. To qualify, the provider must obtain engineering source approval from the Government Design Control Activity. The contract is categorized under NAICS code 332710 and mandates strict adherence to NIST SP 800-171 and DFARS 252.204-7012 cybersecurity and data protection standards. Performance will take place in Santa Rita, with a response deadline set for November 9, 2026.

POSTED

about 2 hours ago

DEADLINE

Supply of Multiple Angle Sensor BracketsThis subcontract with the Department of Defense, specifically the DLA Weapons Support Land Supply Chain, involves the manufacture or procurement of Multiple Angle Sensor Brackets under NSN 5340016076959. The contractor is responsible for supplying 12 units of these specialized hardware brackets to prime contractors, with a strict delivery requirement of 5 days from the date of order. Performance for this contract is based in Anniston. Compliance with specific military and industry standards is mandatory, requiring all non-hazardous materials to be packaged according to ASTM D3951 and all shipments to be labeled per MIL-STD-129. The opportunity falls under NAICS code 332722 and was posted on October 28, 2026, with a response deadline of November 9, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 2 hours ago

DEADLINE

Supply of O-Rings (NSN 5331-01-515-0324)This subcontract through the Department of Defense DLA Weapons Support Land Supply Chain requires the provision of six specialized asbestos-free O-rings under NSN 5331-01-515-0324. The contractor is responsible for manufacturing or sourcing the components in strict accordance with applicable part standards, ensuring all items are packaged in waterproof, greaseproof, and opaque bags as specified by MIL-DTL-117. Quality assurance must be maintained through sampling and inspection per MIL-STD-1916 or ASQ H1331, with marking requirements following MIL-STD-129. The agreement mandates full compliance with the Buy American Act and DFARS 252.225-7001. Performance for this contract is centered in New Cumberland, Pennsylvania, under NAICS code 326111.

Plastics Bag and Pouch Manufacturing

POSTED

about 2 hours ago

DEADLINE

Supplier of Angle Bracket (Caterpillar PN 337-2164)This subcontract involves the supply of one Angle Bracket, identified by NSN 5340-01-727-9631 and Caterpillar part number 337-2164, to support prime contractors for the DLA Weapons Support Land Supply Chain. The selected supplier is responsible for sourcing the hardware and ensuring all packaging and labeling adhere to RP001, MIL-STD-129, and ASTM D3951 standards. Additionally, the provider must maintain full compliance with the Buy American Act and the Berry Amendment. The completed order must be delivered FOB Origin to Fort Stewart, Georgia. This opportunity falls under NAICS code 423830 and is managed by the Department of Defense. Interested parties must submit their responses by the deadline of November 9, 2026.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 2 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Aerospace Surface Treatment and Finishing

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Industrial Coating and Surface Treatment Services

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Aerospace Special Process Treatment (NADCAP)

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Protective Coating Application

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

Military Specification Finishing and Coating Services

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Aerospace Surface Treatment and Coating

CHERRY POINT PHANTOM RD BLDG

POSTED

DEADLINE

Aerospace Surface Treatment and Finishing

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Specialized Coating, Plating, and Non-Destructive Testing (NDT)

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Precision Coating and Surface Treatment

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Supply and Coating of Steel Hardware for Vehicular Covers

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Aerospace Surface Treatment and Coating

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Surface Treatment and Finishing for Handbrake Ratchets

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS